Save this Search
     
Sort by:
  • Posted Date
Time Left: Less than 3 days
Fixed Price: Not Sure   |  Posted: Sep 02, 2015  |  Ends: 1d, 5h  |   0 Proposals
Hello, I wanted to know if you could help me. I'm designing a new product that needs an internal power generation. My research has steered me towards "disc type axial flux generators /motors". See attached sketch idea. Basically I need a test bed to prove theory I have based on the contrasts that are given. I can't fully describe the entire design but part of it needs to generate electricity and output it to a outlet, which kind of mimics a typical low voltage wall outlet performance you would find at a normal house. The initial device constraints was to have a cylinder can design with a max diameter of 3.5 -5 inches, and have the device be very light weight, and requiring very little force to spin the axial flux inside. I have not specified a height yet this is all a idea in testing phase. What I'm requesting is a design or instructions to create a test bed in my shop and so I can build and tested it, the shape and design are critical. This is a generator, I will ...
Category: Electrical       

m****478
 [?]
Sign in to view client's details.
| m****478 *
|    United States
Fixed Price: Not Sure   |  Posted: Sep 01, 2015  |  Ends: 10h, 24m  |   39 Proposals
I have a PCB that needs a redesign + improvement. It will need to be coded from scratch but it's a simple device. Looking for someone who can do it within 2 weeks as it's a priority job.
Category: Electrical       

t****gak
 [?]
Sign in to view client's details.
| t****gak
|    Australia
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: Aug 22, 2015  |  Ends: 2d, 7h  |   1 Proposal
Electromechanical Engineering Technician - It is combination of Mechanical, Electronic, Electrical Engineering. Software :- PLC, Autocad, Solidworks, Automation Studio etc.
Category: Other - Engineering &...       

2****mra
 [?]
Sign in to view client's details.
| 2****mra
|    Canada
Fixed Price: $500 - $1,000   |  Posted: Aug 21, 2015  |  Ends: 1d, 10h  |   4 Proposals
simple design to receive and transmit wifi compact unit with 2 wifi plugs can you make this 100% need design and production
Category: Other - Engineering &...       
Skills: Manufacturing Design, Electronics       

d****est
 [?]
Sign in to view client's details.
| d****est
|    United Kingdom
Hourly Rate: $40 - $50 / hr   |  Duration: 3-4 weeks  |  Posted: Aug 21, 2015  |  Ends: 22h, 19m  |   12 Proposals
Hello, I am trying to find a person to bring my product ideas to life and give them a real face and take them from sketches to a real look and design and then to real life. I have looked at other freelancers but no one works with soft goods (Materials) all just working with hard goods, electronics and solid designs. I saw your portfolio and was impressed and saw you back back designs so I figured Id reach out. I need a US base freelancer to make communication easier. I have three products I want to bring to life. I need a designer that can think outside the box, is creative and has the imagination to make this happen. Items: -Multi functioning sports towel/shell idea -caribiner key chain idea with multifuntioning hooks -folding top (similar to a jacket in shape) that can fold into itself
Category: Product Design       

W****MMA
 [?]
Sign in to view client's details.
| W****MMA
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Aug 21, 2015  |  Ends: 21h, 49m  |   9 Proposals
Currently developing a product that features a battery powered heating pad. ...Need to give technical specs for this pad to the manufacturer. ...Need to source wearable battery to power this heating pad. ..Need to define the features of and source switch and controls for operating this device. This job is for an experienced engineer who also has knowledge of suitable sources. Please quote for 3hrs of work. You should be prepared to discuss and clarify on Skype.
Category: Electrical       

A****ntl
 [?]
Sign in to view client's details.
| A****ntl
|    Canada
Fixed Price: Not Sure   |  Posted: Aug 21, 2015  |  Ends: 21h, 26m  |   7 Proposals
I need help designing a product that will throw/lunch a football using compression and RFID to determine target. This support is just to build the blue print for the product and help identify the best method of achieving said goal. Below is the description of what the final product will do This device is a machine that replaces the need of having a quarterback or someone to throw a football during practice or fun. The machine throws footballs to its intended target based on RFID technology and selected patterns picked by the player. This machine give players the ability to play backyard football with as little as 2 players or can be used by a wide receiver to prefect his route running. Picture this: Four kids in backyard, One team with RED RFID wrist band that and the other team with Blue RFID wrist band. Each band is tractable by that the Elway. To start the game, each member of the red team selects a pre-programed route that he wants to run. Player 1 selects 10 yard post, Playe...
Category: Product Design       

j****kor
 [?]
Sign in to view client's details.
| j****kor
|    United States
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: Aug 20, 2015  |  Ends: 10h, 55m  |   6 Proposals
I have developed a new fitness product that uses air powered cables and bluetooth handles to adjust the weight.   [obscured]   We are now at the CE and UL certification stage. We are looking for an engineer to help manage the certification process and if done well, we hope this engineer decided to stay on for ongoing design and manufacturing. Please look at the website video and then let me know if you are interested. Include your experience with CE and UL products or process. -Brandon
Category: Other - Engineering &...       
Preferred Location: United States

i****fun
 [?]
Sign in to view client's details.
| i****fun
|    United States
Fixed Price: Less than $500   |  Posted: Aug 06, 2015  |  Ends: 1d, 0h  |   6 Proposals
I have created a prototype of a web-connected bulb using a Raspberry Pi micro-controller which connects to WiFi, a PowerSSR Tail that is controlled by the GPIO of the Raspberry Pi (  [obscured]  /pages/powerssrtail.aspx), and a standard light fixture. I would now like to move my design forward, in order to produce several dozen units. I would like to miniaturize my design into a compact and easily-produceable design. I do not know exactly what shape the design should take, so I am open to suggestions, whether it be soldered components or a complete PCB. The design will need to split mains power from a standard plug into three 'paths': one to the micro-controller at the appropriate rate, one to the SSR without any rating-change, and one to a powered speaker, again at the appropriate level. I will need help selecting and sourcing components as well. Inquire for more information!
Category: Electrical       
Preferred Location: North America

j****fer
 [?]
Sign in to view client's details.
| j****fer
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job