Save this Search
     

All JobsElectronicsHourly

 (115 results)  
Sort by:
  • Posted Date
Hourly
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 29, 2015  |  Ends: 7d, 5h  |   11 Proposals
Looking for experienced candidates required for estimating take offs: 1. Floor and wall tiling 2. Stones 3. Waterproofing Preference for: 1) Knowledge of Planswift 2) Knowledge of Australian Building Standards 3) MS Office skills Freelancer required for regular take offs to efficiently prepare quantities breakdown and provide summary. Regular take off required ranging from small to large commercial jobs. Thanks.
Category: Other - Engineering &...       

Q****s34
 [?]
Sign in to view client's details.
| Q****s34
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 28, 2015  |  Ends: 7d, 0h  |   6 Proposals
Hi, I need help in the field of power electronics modeling and simulation. I need a professional help in a book I'm currently reading " Power electronics converters modeling and control" by Seddik Bacha. Thanks
Category: Electrical       

R****_PE
 [?]
Sign in to view client's details.
| R****_PE
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 28, 2015  |  Ends: 6d, 20h  |   28 Proposals
Programming of microcontrollers as well as PCB design and software review. I am based in worcester ma.
Category: Electrical       

S****gal
 [?]
Sign in to view client's details.
| S****gal
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 28, 2015  |  Ends: 6d, 20h  |   7 Proposals
Programming of microcontrollers as well as PCB design and software review. I am based in worcester ma.
Category: Electrical       

S****gal
 [?]
Sign in to view client's details.
| S****gal
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 28, 2015  |  Ends: 6d, 15h  |   2 Proposals
We have a hydraulic power plant on a large piece of mobile plant. The diesel engine is mounted inside a cabinet much like a Genset. We want someone to do an acoustic simulation of the system so we can compare it to actual measurements and then when it is correct use it to predict different baffle or acoustic damping systems. The systems are used on urban civil construction so we want to reduce the acoustic signature as much as practicable. The project will be completed via gateways. The first being to develop or acquire an acoustic model of the engine including fan and exhaust. This may be available from the engine manufacturer or other source. You would be responsible for acquiring this model. The second gateway will be to embed the engine model in the equipment carriage model. We would provide the engineering diagrams for this as Autodesk Inventor models. This would then be used to predict the acoustic footprint of the machine. The third gateway would be to tweak the model...
Category: Other - Engineering &...       

J****sNT
 [?]
Sign in to view client's details.
| J****sNT
|    Vietnam
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 27, 2015  |  Ends: 6d, 4h  |   4 Proposals
HRNUG is a user group for software developers that use the Microsoft .NET programming language. We are a group that meets once a month and need help performing various admin activities like scheduling the next meeting, email reminders, social media updates, looking for new speakers, communicating to local schools and businesses about our group, emailing potential companies to sponsor us, emailing companies in the industry to send us free prizes for giveaways, etc... We're looking for someone to work with us long term that can speak and write good English. Most communication will be electronic but may have to pick up the phone or Skype. Someone with a technology background would be a plus. You can find more about our group here:   [obscured]  /Hampton-Roads-NET-Users-Group/
Category: Virtual Assistant       
Skills: Administrative Support, Data Entry, Research       

h****nug
 [?]
Sign in to view client's details.
| h****nug
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 27, 2015  |  Ends: 5d, 12h  |   12 Proposals
Hello, I need an organization that can set up an electronic document management, this will involve scanning huge sums of document, building a database and storing everything on there and making it searchable via a front end that is user friendly and very easy to use. It may also be required to build a backup system to provide redundancy for the system. The job will be performed in Accra, Ghana so I need an organization that will be able and willing to travel there, we will initially have to create a pilot for a small contract, do a demonstration to the client and once they are happy with it, we will discuss and put together the bigger contract. This could be an entire government agency and its affiliates. I need professionals with experience in this area so submit proposals latest by Friday July 4th, thank you!
Category: Other IT & Programming       

a****are
 [?]
Sign in to view client's details.
| a****are
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-3 months  |  Posted: Jun 27, 2015  |  Ends: 5d, 6h  |   9 Proposals
Job reference code: US_EN_1_020064_15664585 Description: About Arise: Arise Virtual Solutions is a work-at-home business process outsourcing company that uniquely blends crowdsourcing innovation, virtual technology and operational efficiencies to deliver better results. Recognized as a work-at-home call center pioneer, Arise has been delivering services in the cloud for over 15 years through its network of over 25,000 independent work-at-home customer service, sales and technical support providers in the United States, Canada, the United Kingdom and Ireland. We are seeking an extremely detail oriented, computer literate person with excellent phone skills who can handle a full slate of projects and maintain organization at all times. Typical assistant responsibilities include: rolling calls, heavy email, client/agency relations, scheduling, coordinating travel arrangements, maintaining calendars, submissions, client payment tracking and some general office m...
Category: Virtual Assistant       
Preferred Location: North America, Central & South America

A****tem
 [?]
Sign in to view client's details.
| A****tem
|    United States
Hourly Rate: $13 - $17 / hr   |  Duration: Not Sure  |  Posted: Jun 26, 2015  |  Ends: 5d, 2h  |   0 Proposals
I started with a remodeling company doing, additions in homes and after doing a little bit of plumbing, drywalling, tiling, and electrical i finally decide my career. I fell in love with electrical because its not easy, just something anyone can do, its a art of its own, with that being said should be treated like art. While i work i make sure im am careful and double check everything because i understand that my work quality will affect lives. Its not something to play with it, electricity can do as much harm as its done good for us if not done in the correct manor. This is why i know i am the man to contact for the job. My expertise is in the residential side
Category: Electrical       
Preferred Location: United States

a****781
 [?]
Sign in to view client's details.
| a****781
|    United States
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: Jun 26, 2015  |  Ends: 4d, 20h  |   62 Proposals
We have been working with a contractor who has limited availability to create a patient portal which integrates with our electronic health records application. We need another developer with more time available to help us finish up the project. The portal is an ASP.NET MVC web application written in AngularJS. Additional functionality needed includes: Sending email and text appointment reminder messages which allow the patient to either confirm or cancel the appointment. Enabling patients to electronically sign PDF forms after they are uploaded. Restructuring the way "authorized users" function on the site so that those users can communicate with the patient's provider privately rather than from within the patient's account Displaying a patient's statement pushed from our EHR into the portal, and embedding an online payment module which is being provided by our merchant vendor. Creating an online form which will enable the patient to enter their medical history into fiel...
Category: Web Programming       

d****sme
 [?]
Sign in to view client's details.
| d****sme *
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: Jun 26, 2015  |  Ends: 4d, 18h  |   1 Proposal
Position : IA -Epic Nursing Trainer Location : Iowa City, Iowa Job Description: A Trainer (TTW) to provide onsite training and implementation support for Epicare Inpatient Clinical Documentation for new nurses Health Care Information Systems is seeking an experienced training consultant to provide onsite training and implementation support for the electronic health record (EHR) software application, Epicare Inpatient Clinical Documentation for new nurses . Key duties involve learning relevant University of Iowa Hospitals and Clinics workflows and curriculum in order to provide classroom training. Skills- Certified or credentialed in Epicare Inpatient Clinical Documentation Experience providing application and/or technology support Experience providing focused training in large and small group settings to adult learners Experience delivering role-based curriculum
Category: Other - Administrative...       

p****345
 [?]
Sign in to view client's details.
| p****345
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 26, 2015  |  Ends: 4d, 17h  |   7 Proposals
I am looking to improve conventional HFAC (air conditioning system) Controller. I need design for the board and prototype made if needed. The system will do the following Input 120VAC and 240VAC / Output 24VAC Board will receive input from 8 thermostats which send 24VAC signal to Board When Signal is received the Board needs to start (using relay) High Voltage Motors (blowers) and in some cases also send 24VAC to another device. Board needs to be connected to Network using Ethernet Cable All of these rules need to be configurable in some software utility Board needs to be connected ready OHM from Temperature sensors (8 of them ) Board needs to be able to receive information from network for each 8 zones about Requested temperature. Board needs to make decisions as to if temperature is ABOVE requested then DO THIS if below THEN DO THIS. Programmable on board. This is the first time I am designing a board so I will need assistance and iterations.
Category: Product Design       

T****ORP
 [?]
Sign in to view client's details.
| T****ORP
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 25, 2015  |  Ends: 56d, 3h  |   29 Proposals
Hi! I have a great idea that i want to produce. I wanted to know if you can help me engineer, manufacture, and execute this idea. Thank you very much.
Category: Product Design       

A****131
 [?]
Sign in to view client's details.
| A****131
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 25, 2015  |  Ends: 3d, 20h  |   9 Proposals
We are looking for someone extremely well educated, most likely an engineer, who has worked with either the technical aspects of biomass enough to understand the complexities of generating electricity from agricultural waste, or someone with extensive experience with fuel procurement related to biomass. We are an international renewable energy development company looking for a resident expert in all things biomass to keep on our company roster and payroll.
Category: Other - Engineering &...       

A****ner
 [?]
Sign in to view client's details.
| A****ner
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 25, 2015  |  Ends: 3d, 17h  |   6 Proposals
Summary PPS needs an installer for drivers for our two types of hardware that are compatible with Windows 10 and below. The installer should automatically install the proper version (32-bit or 64-bit) even if the hardware is not connected. A standalone installer is needed that will install both drivers, and if possible, integrating the driver installation with PPS's existing software installer would also be desirable. PPS has a Microsoft Authenticode certificate for signing needed binaries and other files that is valid through May 2017. USB Driver PPS uses custom USB electronics that use the standard Cypress CyUSB driver with a customized inf file. The driver was certified to work with Windows 7and below, but all signatures and other security-related items must be supplied. Certification from Microsoft is not required. The driver is a re-named version of the Generic USB driver available from Cypress Semiconductor and needs to be updated to the current released version from Cypress. ...
Category: Software Application       

d****les
 [?]
Sign in to view client's details.
| d****les
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: 7-9 months  |  Posted: Jun 24, 2015  |  Ends: 3d, 2h  |   10 Proposals
Our 11 years old company is rapidly expanding and we are looking to hire a few new entry level sales representatives. This position offers lots of room to grow and the stability of working with a company based in Beverly Hills, CA with a proven track record. We offer a one a kind training for all employee helping our loyal employees become an asset. The Inside Sales Representative will initially start as an Appointment Setter who will act as the first contact for prospects through both inbound and outbound calls. Responsible for supporting sales and business development within a defined territory, the Insides Sales Professional will qualify leads, set appointments based on provided script. This unique position offers a HUGE growth potential for the right candidate where you will be promoted to sales person within 30-60 days with a 30% commission structure and salary once you prove your skills in your start-up period. ==== PAY===== The position offers an average pay of $20 per hour on ...
Category: Telemarketing       
Skills: Sales, Telemarketing       
Preferred Location: North America, Western Europe, Eastern Europe, Eastern Asia, Central & South America, Australia/Oceania

a****010
 [?]
Sign in to view client's details.
| a****010
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Jun 24, 2015  |  Ends: 3d, 1h  |   15 Proposals
Design a fun and creative logo representing mission, vision and value. The logo must be in a electronic format (jPEG...). The deadline is end of day Friday June 26th.
Category: Logos       

S****e65
 [?]
Sign in to view client's details.
| S****e65
|    Canada
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: Jun 24, 2015  |  Ends: 2d, 16h  |   1 Proposal
We are develloping a software similar to the TERAPEAK , it scans every category on ebay and displays all the best selling products on each category and subcategory The software is nearly 80% done, but has some errors that must be resolved (see the attachment), our engineer is not available to conclude the project because he has received a offer to work in a foreign country. We need someone that can finish the last bugs (see attachment) and create a yearly licence system with 3 different packages for the software. Necessary Requirements: - Good level in Nodejs and Requirejs - Good Knowledge in Electron (Atom-shell). (You must know how to proceed with "Package Generation") - Good level in Javascript - you must create a free account in the ebay Develloper program - you must be fluent in English, phone calls may be Needed When you bid, please reply only if you fullfill all the requiriments and provide some similar projects you have done. If you already know the ebay...
Category: Software Application       
Skills: Javascript, atom-shell, nodejs       

c****no7
 [?]
Sign in to view client's details.
| c****no7 *
|    Portugal
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 24, 2015  |  Ends: 2d, 13h  |   6 Proposals
Product Development Requirements 1. Use removable battery, small size OR Rechargeable 2. Can measuring body size by using 2 tapes one on top not showing in the images, Please see Draft Image, 3. Communicate with Smartphone APP 4. APP programming 5. Compact And light Design
Category: Product Design       

N****ver
 [?]
Sign in to view client's details.
| N****ver
|    Ireland
Hourly Rate: $10 - $15 / hr   |  Duration: 7-9 months  |  Posted: Jun 24, 2015  |  Ends: 2d, 13h  |   34 Proposals
I need a medical typist to type Gastroenterology letters. It will be about two hours of work two days a week. However I need someone who will be available to do the typing immediately after the clinic finishes so that the letters are typed straight after clinic. This will be Tue, Wed and Fri 1pm Perth, Australia time (depending on the week in the monthly cycle it will be either Tue and Wed, Tue and Fri or Wed and Fri). The candidate must have very good English skills, have fast typing skills and ideally have worked with Gastroenterology letters before so that the Gastroenterology language database is already known. Audio files will be sent electronically and sometimes accompanied by any relevant PDF files that may assist with typing
Category: Transcription       
Skills: Typing, Medical Transcription, Transcription       

a****789
 [?]
Sign in to view client's details.
| a****789
|    Australia
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Jun 23, 2015  |  Ends: 17d, 0h  |   33 Proposals
We're a Trade and Exchange Company, presently seeking competent Customer Service Agents who can actually provide a standard online service to our clients and customers within specific regions. Your responsibilities: - Respond to customer trade requests and inquiries via chat, and email in an efficient and effective manner - Explains services, options and related charges clearly and concisely - Asks appropriate questions and gather information to determine customer needs - Contributes to team effort by accomplishing related results as needed. - Maintains electronic wallets by processing customer adjustments - Maintains assigned customer records by updating their information - Recommends potential services to management by collecting customer "buy" information and analyzing customer needs Skills and Qualifications: - Customer Service - Data Entry Skills - Problem Solving - E-Trade Market Knowledge (Self-trade training immediately hired) - Documentation Skills - Attentiveness...
Category: Customer Service       
Preferred Location: Canada

x****078
 [?]
Sign in to view client's details.
| x****078
|    Canada
Hourly Rate: Not Sure   |  Duration: 7-9 months  |  Posted: Jun 23, 2015  |  Ends: 1d, 22h  |   23 Proposals
Job Purpose: Maintain records of financial transactions for small business by maintaining accounts; posting transactions. Job Duties: ? Review current system to account for financial transactions and suggest improvements where desirable; define bookkeeping policies and procedures and revise/maintain bookkeeping operations manual. Identify and implement best practices for business work flow to compliment accounting and bookkeeping. ? Maintain subsidiary accounts by verifying, allocating, and posting transactions. ? Balance subsidiary accounts by reconciling entries. ? Maintain general ledger by transferring subsidiary account summaries. ? Balance general ledger by preparing a trial balance; reconciling entries. ? Maintain historical records by filing documents and managing digital records. ? Manage accounts payable and accounts receivable processes. ? Monitor and reconcile bank and credit card transactions and balances. ? Prepare financial reports (cash and accrual basis) by coll...
Category: Accounting       
Preferred Location: United States

t****imo
 [?]
Sign in to view client's details.
| t****imo
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job