Save this Search
     

All JobsEmailEngineering & ManufacturingFixed Price

 (815 results)  
Sort by:
  • Posted Date
Fixed Price: $1,000 - $5,000   |  Posted: Dec 05, 2014  |  Closed  |   5 Proposals
I would like you to develop my patent pending concept. It is a spherical-shaped, water dispersible ball containing shampoo, conditioner, and body wash. What your job would be is to create the individual, fast dissolving film that can hold liquids, yet dissolve in water. This film ideally would dissolve within seconds, and be safe for humans and the environment. I would also like you to create a concentrated shampoo, conditioner, and body wash compatible with this product. It should be created within two months. Must respond fast to emails, and hardworking. Please read description before submitting applications.
Category: Chemical Engineering       
Preferred Location: North America

B****elp
 [?]
Sign in to view client's details.
| B****elp
|    United States
Fixed Price: Not Sure   |  Posted: Nov 27, 2014  |  Closed  |   6 Proposals
We are looking for a person who lives in China, speaks Chinese and could go through several local motor manufacturers to find us a suitable motor. You should preferably have some engineering background (education or experience) and/or knowledge of local DC gear motor manufacturers. The motor should be CE marked according to European standards and preferably already be exported to Europe. The end use of the motor will be in Europe. The task is to: - make a list of suitable manufacturers according to given motor specifications (about 30 potential manufacturers should be found to the list) - by e-mail or phone check if the motor and the manufacturer corresponds to our requirements. - The low voice level of the motor and the gear with a load is the most important criterion for the choice. The voice level will need to be separately measured by the manufacturer as it is not common to give this information in sales brochures. - make a short list of about 5 most quiet motors that will mee...
Category: Other - Engineering &...       
Preferred Location: China

4****idz
 [?]
Sign in to view client's details.
| 4****idz
|    Finland
Fixed Price: Less than $500   |  Posted: Nov 25, 2014  |  Closed  |   1 Proposal
Data Collection - list provision: Simple provision of Names, Numbers and Emails Any of the following lists are acceptable, 1. American Citizens living in Dubai. 2. Western European Citizens living in Dubai 3. UK Citizens living in Dubai Can be from an internal company data base, or from a previous marketing exercise.
Category: Chemical Engineering       

m****bai
 [?]
Sign in to view client's details.
| m****bai *
|    United Arab Emirates
Fixed Price: Less than $500   |  Posted: Nov 24, 2014  |  Closed  |   38 Proposals
Hello. I am looking for a highly professional 3D architectural rendering artist that is particularly good in outside renderings. The renderings should be close to photorealistic and the artist needs to be able to deliver, clean and minimalistic modern look. I am attaching a picture of the building complex before the renovation. 3D visualizations should show the renovated building. more infos to follow. Please send 2-3 exceptional examples of your work directly in the e-mail when you are applying, that fit well to this kind of job. The job needs to be done within less than a week, so please only apply for this job if you do not have other urgent work to finish in this week! Thanks. Looking forward to your message!
Category: 3D Modelling       
Skills: Architecture, 3D Rendering       

t****moy
 [?]
Sign in to view client's details.
| t****moy
|    Germany
Fixed Price: Not Sure   |  Posted: Nov 24, 2014  |  Closed  |   13 Proposals
Dear all, I have one centrifugal pump model with me with 5 number of blades. You have to modify the same for 6,7 & 8 number of vanes and you have to do CFD analysis for the same and get a results. These things you have to do. Thank you. Dear Elancer, You can Email me all the details/solution with your Name, experience , approach to job and final costing for this job on   [obscured]  . I will reply you asap.
Category: CAD       

r****889
 [?]
Sign in to view client's details.
| r****889
|    India
Fixed Price: Not Sure   |  Posted: Nov 21, 2014  |  Closed  |   2 Proposals
We are looking for a talented 3D animator. Objectives: - Creation of commercials (script attached) - Limited time demands - Responsibility - The speed and quality of From you: - portfolio - Terms for which you can do the job - The amount you want to receive for their services - Your contact information: e-mail, skype, Notel
Category: 3D Modelling       
Skills: 3d Animation       

A****kom
 [?]
Sign in to view client's details.
| A****kom
|    Ukraine
Fixed Price: $500 - $1,000   |  Posted: Nov 19, 2014  |  Closed  |   42 Proposals
Attached is a survey of a 27 room/bungalow motel called the Tides located in Pismo Beach. We are looking for someone who can take these rough drawings and measurements and recreate them in CAD, provide us with the CAD file as well as a PDF of the new drawings. I have included a rough floor plan for each room/bungalow and a layout for reference where each sits on the site. A search on Google Maps will help as well. These drawings are not to scale, and the recreated file should include correct spacing for actual wall dimensions (assuming 2x4 construction). Scale should be 1/4" = 1'. This project is purely for design purposes of furniture, fixtures, finish materials. Finished plans will not be used for any structural, mechanical or permitting purposes. Intuition may be necessary as well as some guessing, so perfection is not expected. Please email with any questions. Jarom
Category: Architecture       
Skills: ArchiCAD, AutoCAD, AutoCAD 2012       

p****621
 [?]
Sign in to view client's details.
| p****621
|    United States
Fixed Price: Less than $500   |  Posted: Nov 17, 2014  |  Closed  |   28 Proposals
Hello, i need custom parts created and manufactured in steel and alloy, these are small parts and their complexity and tolerances are medium. I need an engineer that can draw the parts correctly on the computer as well as supply some knowledge of materials to be used for stress and fatigue applications. I have preference to work in America for timing and communication, but if you are quick with emails and have above normal English skills i will consider you.
Category: CAD       
Skills: SolidWorks       

K****sil
 [?]
Sign in to view client's details.
| K****sil
|    United States
Fixed Price: Less than $500   |  Posted: Nov 13, 2014  |  Closed  |   9 Proposals
Price per drawing is 15$. You need existing site plan drawing, and 8 proposed drawings.Price as the email conversation.
Category: Architecture       

o****oup
 [?]
Sign in to view client's details.
| o****oup
|    United Kingdom
Fixed Price: Less than $500   |  Posted: Nov 10, 2014  |  Closed  |   9 Proposals
I am working on a relatively small computer hardware project. It basically involves assembling a battery-powered bluetooth volume control dial from a handful of parts, including a mini microcontroller, potentiometer, and breadboard. I should have all of the hardware components needed to make this work. I also have a couple of guides that show how this could potentially be wired up. I just need someone who is familiar with wiring computer hardware and maybe installing a driver. If you know what you're doing, this could be an easy way to make some extra cash. I just need a little guidance and consulting. Once a freelancer has been chosen, we can chat via Skype, email, and/or IM so I can explain the project in further details, and to communicate during the project. If you have any questions, please let me know. I'm looking to hire someone within the next day or two.
Category: Electrical       

S****ick
 [?]
Sign in to view client's details.
| S****ick
|    United States
Fixed Price: Not Sure   |  Posted: Nov 09, 2014  |  Closed  |   12 Proposals
We are looking for a skilled draftsperson with experience and proven track record of work in Australia. In particular within South Australia would be advantageous. We have a set of Planning Approval drawings (Site Plan, Elevations, Floor Plan and three sections). We are currently awaiting engineering documentation. What we require is the drafting of the following; 1. Copy and tidy up existing Site Plan, including detailing sewer, stormwater drainage 2. Elevations, tidy up existing 3. Floor Plans - detail and re-dimension floor plans for construction 4. Section drawings to be detailed to match engineering information and labled 5. Detail drawings for wet areas, internal elevations of the upstairs bathroom and downstairs laundry. 6. Detail drawings for the box gutter and connections between the new and old roofs (this may require consultation between us and the succesful contractor) 7. Detail drawings for the laundry chute (a system will be selected in the next 5 days) 8. Electrical...
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD, Rhinoceros 3D       

j****ill
 [?]
Sign in to view client's details.
| j****ill
|    Australia
Fixed Price: Less than $500   |  Posted: Nov 06, 2014  |  Closed  |   1 Proposal
Re-route a number of changed traces on an existing PCB design. Please keep 2-layer, minimum 6 mil traces with 6 mil spacing, and 13 mil drills with 7 mil annular rings Looking for the job to be completed by Sunday evening (Saturday morning would be nice) Elance will be down Saturday, you can reach me by email at   [obscured]  
Category: CAD       
Skills: Eagle       

t****318
 [?]
Sign in to view client's details.
| t****318
|    United States
Fixed Price: Less than $500   |  Posted: Nov 06, 2014  |  Closed  |   0 Proposals
Modification to existing board design to include some changed routing 1.) Re-Route changed RST traces 2.) Check that the updated 0603 package for R1 works 3.) If possible, make the vias between sub-boards slightly larger Please keep 2-layer, minimum 6 mil traces with 6 mil spacing, and 13 mil drills with 7 mil annular rings Looking for the job to be completed by Sunday evening (Saturday morning would be nice) Elance will be down Saturday, you can reach me by email at   [obscured]   Elance will be down Saturday, you can reach me by email at   [obscured]  
Category: CAD       
Skills: Circuit Design, Eagle       

t****318
 [?]
Sign in to view client's details.
| t****318
|    United States
Fixed Price: Less than $500   |  Posted: Nov 06, 2014  |  Closed  |   1 Proposal
Update to an existing board design 1.) Route the 4 changed RST signals 2.) Move X1 down if possible (to y = 650 or so) -- note updated package 3.) It would be nice to move LED1 to the center of the board in the x-axis, perhaps along the middle of the bottom edge (note R1 was changed to a 0603 package) Please keep 2-layer, minimum 6 mil traces with 6 mil spacing, and 13 mil drills with 7 mil annular rings Looking for the job to be completed by Sunday evening (Saturday morning would be nice) Elance will be down Saturday, you can reach me by email at   [obscured]  
Category: CAD       
Skills: Electronics, Eagle       

t****318
 [?]
Sign in to view client's details.
| t****318
|    United States
Fixed Price: Not Sure   |  Posted: Nov 05, 2014  |  Closed  |   14 Proposals
4 storey office block, consisting underground basement carpark 3 levels of office and roof and plantroom . hvac consist of a air cooled chiller and approximately 100 fan coils unit as well as other ventilation systems we will require coordination of plumbing electrical and HVAC need quote at this stage , work to begin dec 2014 Drawings available please email
Category: CAD       
Skills: AutoDesk Revit       

d****ald
 [?]
Sign in to view client's details.
| d****ald
|    New Zealand
Fixed Price: $1,000 - $5,000   |  Posted: Nov 04, 2014  |  Closed  |   20 Proposals
I have a Patent Pending on a Revolutionary Pet Invention for Dogs and can be used for other Pets. I have some 2D and 3D renderings that will give you a Great Reference point of where to start. I am wanting to run an "Indie go go" crowdfunding campaign to further develop prototype and looking for a person that can help me render motion graphics and Virtual 3D prototypes. I need material that is REAL looking to be able to show my customers and Investors a Photo Realistic Look of my Invention. I will be able to share in more detail once we sign a NDA. Thank You in advance and here is a link to Indie go go so you will not miss EXACTLY what i'm looking for in the Venture. -Andre Butler/CEO/Inventor, U.S. Pets LLC, Frisco TX Please call me, I prefer that over email if possible. Here is a link of the type of renderings I am wanting and feel free to browse the technology section of Indiegogo for a Broader Look. Thank You. Link: indiegogo.com/projects/bionic-bird-the-flying-app--...
Category: CAD       
Skills: 3D, 3D Modeling, 3d Animation, 3D Design, 3D Rendering       

U****LLC
 [?]
Sign in to view client's details.
| U****LLC
|    United States
Fixed Price: More than $10,000   |  Posted: Nov 04, 2014  |  Closed  |   25 Proposals
Seeking Full time contract for qualified draftsman or Architect. Honest, Integrity, hard working, and genuine ability and interest in designing residential and commercial buildings. Must have significant experience with Autocad, Word, Excel, Design, etc.. Revit, or other BIM products a +PLUS. International Building Code - 2006, Type III-V Construction typical. Civil engineering background or ability a big PLUS. English speaking necessary, and emailing, communicating in English mandatory. Professional, highly skilled, and willing to work @ GMT -10:00. May also be possibly willing to travel IF NECESSARY, but MOST LIKELY not. Pay is dependent upon experience and to be negotiated. Possible bonus structure available as well. Must be willing to work full time, and prove work full time per screen capture. NO OTHER JOBS PERMITTED on weekends, after hours, or at all. If other work is requested, we will gladly remove payment for that period of time dependent upon needs. We have su...
Category: Architecture       

b****ele
 [?]
Sign in to view client's details.
| b****ele
|    United States
Fixed Price: Not Sure   |  Posted: Nov 03, 2014  |  Closed  |   7 Proposals
Hi, I look for somebody who is able to produce a board made of metal with 24 hooklets in. The board will have white or mat white surface and on the hooklets, there will be paper cards hanging. The board will hang on the wall or stand on floor. I have detailed description of the product and the parameters ready and can send by email. Thank you.
Category: Interior Design       
Skills: 3D Modeling, Architecture, Interior Design       
Preferred Location: Norway

M****ras
 [?]
Sign in to view client's details.
| M****ras
|    Norway
Fixed Price: Less than $500   |  Posted: Nov 01, 2014  |  Closed  |   37 Proposals
I am looking for a skilled engineer to design a 3D box, rectangular. Ideally, the end product would be sheet metal weldment.We can talk specifics later. I would appreciate someone that has experience in sheet metal and weldment. Please email me if we can work together. Thank you, Chris   [obscured]  
Category: CAD       
Skills: SolidWorks, 3D Design       

C****tlb
 [?]
Sign in to view client's details.
| C****tlb
|    United States
Fixed Price: Not Sure   |  Posted: Oct 28, 2014  |  Closed  |   9 Proposals
The position is responsible for the preparation of tenders for carpentry works on  residential, commercial and renovation projects.  The candidate must be able to read and interpret complex construction plans to  a very high level. Ideally with several years on site experience in carpentry and  construction, alternatively with tertiary qualifications in construction.  The Key duties of the role will be;  - Review and assess tender requests and documentation  - Accurately read and interpret detailed construction plans (architectural,  engineering, specifications documentation)  - Accurately assess all areas of project that involve carpentry  - Form a clear and detailed notes file in MS Word (which can be converted into  a handover file if the project is won.)  - Complete take offs of material and labour quantities (using OST estimating  software ? will require candidate to undertake online training)  - Transfer all quantities into excel take-off document (or other proprietary  softwar...
Category: Civil & Structural       

****
 [?]
Sign in to view client's details.
| Client
|    India
Fixed Price: $1,000 - $5,000   |  Posted: Oct 26, 2014  |  Closed  |   16 Proposals
I have a Patent Pending on a Revolutionary Pet Invention for Dogs and can be used for other Pets. I have some 2D and 3D renderings that will give you a Great Reference point of where to start. I am wanting to run an "Indie go go" crowdfunding campaign to further develop prototype and looking for a person that can help me render motion graphics and Virtual 3D prototypes. I need material that is REAL looking to be able to show my customers and Investors a Photo Realistic Look of my Invention. I will be able to share in more detail once we sign a NDA. Thank You in advance and here is a link to Indie go go so you will not miss EXACTLY what i'm looking for in the Venture. -Andre Butler/CEO/Inventor, U.S. Pets LLC, Frisco TX Please call me, I prefer that over email if possible. Here is a link of the type of renderings I am wanting and feel free to browse the technology section of Indiegogo for a Broader Look. Thank You. Link: indiegogo.com/projects/bionic-bird-the-flying...
Category: CAD       
Skills: 3D, 3d Animation, 3D Design, 3D Rendering       

U****LLC
 [?]
Sign in to view client's details.
| U****LLC
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job