Save this Search
     

All JobsEmailEngineering & ManufacturingCAD

 (254 results)  
Sort by:
  • Posted Date
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 20, 2015  |  Ends: 13d, 3h  |   2 Proposals
This build is for a custom pinball machine for my kids, I only need the altium design file, as well as the design of what parts to use where in the circuit. It is only a small task, and I will be able to print the board when I receive the altium file. I need a circuit with a picaxe(08M2 or 14M2) controller controlling it, and I have a 12V and 5V input, as well as ground cables. I have two coin mechanisms that need a 12V input and a ground output, and they have an output for data, that can go straight to the picaxe. One coin mech will have $1 coins input and give you 1 life, where a $2 coin will give you 3 lives. I then have 2 sets of 12V solenoids for the flippers of the machine. They are in line with a light up 12V button. these would need to be in line with a relay or 2 so they only fire when the machine is ready to play. Then I have another 12V solenoid for the game start in line with another light up 12V button. These need to be hooked up so that when a signal is received from...
Category: CAD       
Skills: 3D Modeling, Altium Designer, AutoCAD, SolidWorks       

J****123
 [?]
Sign in to view client's details.
| J****123
|    Australia
Fixed Price: About $100   |  Posted: Apr 22, 2015  |  Closed  |   0 Proposals
Redesign as per recent emails. I have to re-post this information as I need to fill out 100 words: I have added a zip file with: 1. The eagle brd, sch and lbr files in it. 2. A CAD dxf file - probably not needed. 3. A PDF explaining some 'keep out' zones. I have made a special reference component that appears in the pcb layout for you to locate the major parts. Please note: 1. No large capacitors on the underside of the board. 2. No large capacitors under the ODROID (explained in the pdf) 3. Okay to put small components, ics, etc, under the board. 4. The parts that I have placed in the CAD and the special layout components must all remain on the top of the board in the places shown. I hope it helps you! Could you please provide a quote for the layout of the board? Also, could you please quote for the manufacture (pcb production and loading) of 10 boards, for loading only: the ICs, capacitors, resistors, diodes, usb connector, small choke, and fuses. Note there is to be no loadi...
Category: CAD       
Skills: PCB Design       

j****_3d
 [?]
Sign in to view client's details.
| j****_3d
|    Australia
Fixed Price: Less than $500   |  Posted: Apr 07, 2015  |  Closed  |   23 Proposals
Drawings of Concrete Structures, Details of Reinforcement for Beams, Columns, Slabs, Footings, Walls and Beam-Column Connections. Based on the ACI 318 and 352 Building codes. Drawings of Steel Structures, Details of Moment Connections (End Plates, Flange Plates, RBS and more), Shear Connections (End Plate, Single Plate, Clip Angles and more), Plan Views, Frame Views. Based on the AISC 360, 341 and 352 codes. The drawings are done in AutoCAD and sent by email in PDF.
Category: CAD       
Skills: 3D, 3D Modeling, AutoCAD, 2D Design, CAD/AutoCAD       

G****209
 [?]
Sign in to view client's details.
| G****209
|    Spain
Fixed Price: $1,000 - $5,000   |  Posted: Apr 07, 2015  |  Ends: 44d, 10h  |   5 Proposals
Summary For our R&D department in Damen Shipyards Singapore, we are searching for a junior Structural (FEM) Engineer. Tasks and responsibilities ? Perform Structural analysis via Finite Element Method (FEM) of Ship structures in Siemens NX10 (NX Nastran 10); ? Technical advising and later supervising in the area of Structural analysis. ? Analysis reports. Profile ? Bachelor degree or Diploma in Engineering, preferably Marine or Mechanical Engineering ? Good level in spoken and written English ? CAD skills (able to read technical digital drawings) ? CAD Accuracy & fluency is a must or strongly willing to learn. ? Able to work long time with digital modelling. ? Analytical, goal oriented and flexible to work in team or individually. ? Singaporean or Singaporean Permanent Resident Department Information The Damen R&D department provides specific technical support for the Damen Product Groups (project proposal and project management departments), Engineering Services a...
Category: CAD       
Skills: 3D Modeling, AutoCAD       
Preferred Location: Singapore

j****ffa
 [?]
Sign in to view client's details.
| j****ffa *
|    Singapore
Fixed Price: Not Sure   |  Posted: Mar 30, 2015  |  Closed  |   29 Proposals
Hi, We need a professional 3D designer who has extensive experience in designing jewelry to work with us on creating new pendant designs and files to send to the manufacturer for production. You will be required to sign a NDA form. All files and designs created will be sent to us via email (or other) as projects are completed. Our line of jewelry is made of pewter or stainless steel. The pendants are similar to lockets so you must have experience in designing pendants that open up to show the inside and holes or cut-outs which may be in the front and back of the pendant. Important: We want someone who has experience and can give us their suggestions as well as take our ideas/pictures and turn it into something unique on their own. This project is for the first pendant design. If we are satisfied with the work, we will have several more designs to follow. Thank you and looking forward to working with the winning bidder! Chris
Category: CAD       
Skills: 3D Modeling, AutoCAD, Rhinoceros 3D, SolidWorks       

****
 [?]
Sign in to view client's details.
| Client
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 25, 2015  |  Closed  |   12 Proposals
DESCRIPTION The smoking cup is designed to hold a cigarette while its being smoked, providing a catching cup below for any accumulating ash. The clip that holds the cigarette is adjustable, and folds down when not in use. One clip flips up from inside the cup, one from outside. Having two clips gives the user versatility depending on length and size of the item being smoked. ATTACHMENTS I have provided a drawn schematic of the expected first version of the device. The material will be hard, thick, and dishwasher safe plastic. Suggestions are welcome if the E-lancer has experience with plastic materials. I have also attached a photo of a working prototype that has inspired the creation of this product. PROJECT PURPOSE This CAD will be produced as the initial prototype for the Smoking Cup. The job will include the prototype (version 1) and updates and a final version 2. If the relationship is positive, this designer will stay on for future iterations of the product. I work around t...
Category: CAD       
Preferred Location: North America

r****col
 [?]
Sign in to view client's details.
| r****col
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 04, 2015  |  Closed  |   11 Proposals
We wanted to see if you would make some small modifications to our design. 1.Bottle design change: Make the width 9.5cms (measured from the outside), and adjust its height accordingly to make sure the capacity stays at 750ml 2. Apply the new scale to the label borders (front and back) 3. The front label border: Make the height longer each side by approx. 7mm, Feel free to slightly change this metric (but height only). We want to make sure the design looks proportionate and need more space for the label, thats the reason why we want to make the height for the label border larger. I think if you send us a 3D looking drawing (jpg format) with the modifications before your finalize the measurements that will save you some time. I will keep an eye on my email to reply asap!
Category: CAD       
Skills: 3D Design       

t****oll
 [?]
Sign in to view client's details.
| t****oll
|    United States
Hourly Rate: $4 - $6 / hr   |  Duration: Not Sure  |  Posted: Mar 02, 2015  |  Closed  |   1 Proposal
Hello, and thanks for viewing my posting. My company is using the service "Unbounce" to capture leads, and we need to post these leads to our Microsoft Dynamics CRM in real time. Currently we can only receive them via email. There are two options to succesfully do this, which are a little beyond my coding knowledge: 1. Unbounce offers a "webhook" integration, that can post the leads to any URL you provide. We tried this and couldn't get it to work. 2. Forward the leads that are currently coming to our email, and post them to the CRM. Again, this job is to take our leads that include name, phone, and email and have them automatically post to our CRM (dynamics). If you are not familiar with dynamics and couldn't provide the fix in a day please do not apply. Thank you!
Category: CAD       

v****ebe
 [?]
Sign in to view client's details.
| v****ebe
|    India
Fixed Price: $500 - $1,000   |  Posted: Feb 26, 2015  |  Closed  |   4 Proposals
I need a set of sealed foundation plans for a 40x150x12 Arco steel building with 1:12 roof and columns set at 25' I have sealed construction prints on hand to email.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       

g****1v3
 [?]
Sign in to view client's details.
| g****1v3
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 24, 2015  |  Closed  |   17 Proposals
TALENTED ARCHITECT AND PROVEN SKILLS IN AUTOCAD AND 3D MODELLING. GREAT CREATIVITY AND PROFESSIONAL PRESENTATION ARE A MUST. LOOKING FOR A LONG BUSINESS RELATIONSHIP FOR DESIGNING BUILDING FROM SCRATCH. THE CANDIDATE MUST HAVE EXCELLENT KNOWLEDGE OF ARCHITECTURE AND STUNNING IDEAS AND CREATIVITY. 3D MODELLING MUST BE PERFECT AND LOOK VERY VERY PHOTOREALISTIC POST PRODUCTION PHOTOSHOP EDIT IS A MUST TOO. CANDIDATE MUST SUPPLY PORTFOLIO. ALSO EMAIL AND SKYE CONTACT
Category: CAD       

m****ano
 [?]
Sign in to view client's details.
| m****ano *
|    Canada
Fixed Price: Not Sure   |  Posted: Feb 24, 2015  |  Closed  |   16 Proposals
I do small development jobs and I make pencil plans of the floor plans. To scale. I am looking for someone to upload these plans, to scale, on to Archidad 17 or 18 and email them to me. This job is just for two floor plans, Ground Floor and 1t Floor.
Category: CAD       
Skills: ArchiCAD       

M****ign
 [?]
Sign in to view client's details.
| M****ign
|    United Kingdom
Fixed Price: Less than $500   |  Posted: Feb 22, 2015  |  Closed  |   29 Proposals
design a system as in the attachment. we will provide all the details including dimensions. Most of the designs are in a template, you will ONLY need to draw the house layout with the given dimensions. Requirements: - Design, and generate engineering drawings for installation - Expertise with Auto CAD and drafting softwares. - Experience and understanding of the solar industry - Knowledge of National Electrical Code and solar PV industry standards - Develop and maintain a detailed knowledge of residential solar products, associated accessories, and solar system installation. SUBMIT A PROPOSAL ONLY IF YOU CAN DELIVER IT WITHIN 48 HOURS. This is a continuous job for 6+ month, provide a price per project. Please submit your email and skype id. Thanks,
Category: CAD       
Skills: AutoCAD       

****
 [?]
Sign in to view client's details.
| Client
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Feb 17, 2015  |  Closed  |   25 Proposals
Hello I require assistance to produce Landscape Architectural Plans, in AutoCAD 2014 / 2015 The landscape plans will show: - Soft (garden bed, lawn, nature-strip etc.) and hard (paving, concrete etc.) surfaces. - Details of all planting in a plant schedule (trees, shrubs and groundcovers) - Planting details (to be provided by me) - Specification (to be provided by me) I will provide the following necessary files to complete each job via email: - Architectural Cad file to be used as a base drawing (XREF) - Survey Cad file to be used as a base drawing (XREF) - Scanned Mark-up (PDF) of Architectural drawing with the Landscape Architectural Design sketched over including plant selection information / location of planting / density of planting, paving areas, concrete areas etc etc. - Template File in CAD format which includes all drawing information, blocks, colours, lineweights, print settings etc to be used in the final drawing. - Plant schedule template file (Microsoft excel docum...
Category: CAD       
Skills: AutoCAD, 2D Design       

e****324
 [?]
Sign in to view client's details.
| e****324
|    Australia
Fixed Price: $20 - $40   |  Posted: Feb 10, 2015  |  Closed  |   29 Proposals
I need an ongoing CAD/CAM Engineer or Tech to convert Solidworks CAD files to CAM files that will run on Fanuck Controllers for Fadal CNC machines. I can send files in .Step, .Iges, or solidworks. I will need files converted within 24 hours of receiving (by email) them. We will pay per file converted.
Category: CAD       

r****gul
 [?]
Sign in to view client's details.
| r****gul
|    United States
Fixed Price: Less than $500   |  Posted: Feb 05, 2015  |  Closed  |   11 Proposals
I need to create a set of shop drawings for a millwork/cabinet job. Architectural set with specifications available - just need to create shop drawings. please email me to receive set of architectural drawings and elevations. QUICK TURN AROUND. JOB MUST BE COMPLETED BY SUNDAY FEBRUARY 8th!
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

b****-cg
 [?]
Sign in to view client's details.
| b****-cg
|    Canada
Hourly Rate: $30 - $40 / hr   |  Duration: Not Sure  |  Posted: Jan 29, 2015  |  Closed  |   13 Proposals
I need someone skilled in Coreldraw to draw up pieces of a movie prop that will go on to be laser cut out of copper. I will provide examples of the pieces to be drawn up. To the exact same scale. My email is:   [obscured]  .au
Category: CAD       
Skills: CorelDraw       

C****ris
 [?]
Sign in to view client's details.
| C****ris
|    Australia
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Jan 29, 2015  |  Closed  |   39 Proposals
Hi.. We're looking for help to create bathroom tile layout drawings on bathroom floor plans and wall elevations in Auto-cad...Basically create hatches to match tile and properly align to starting points.. We have a couple hundred bathrooms that need to be done, I may hire a couple people to assist depending on how things proceed. Attached are two files A541-CCD14 is a finished sample of what finished result should look like, and A502 is a uncompleted file with some notes added to assist in understanding what needs to be done. A541 was done by copy and pasting and trimming, before I realized it could be done 100 times faster creating a hatch (my older versions of auto-cad didn't have that ability) All work should be done in model space - Please don't move things around as layout tabs have already be set. For those who are selected, the original contract will be for two hours in order to see how accurate and fast your work is, as well as your basic level of understanding. ...
Category: CAD       
Skills: AutoCAD, AutoCAD 2012, 2D Design       

1****RTP
 [?]
Sign in to view client's details.
| 1****RTP
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Jan 25, 2015  |  Closed  |   14 Proposals
Duties and Responsibilities: ? Prepare project drawings as requested by engineering, project or tender management staff. ? Prepare drawings in accordance with project or Company's standard practice for documentation. ? Update drawings in accordance with Design and Document Control procedures. ? Check and review drawings and illustrations before submission, ensuring correctness, and compliance with Company and project standards. Requirement: ? Minimum ITE / Diploma in Electronic, Electrical or relevant. ? Minimum 1 year of exp/ Entry level candidates with the right attitude and willing to learn are welcome. ? Proficiency in Autocad. ? Knowledge in mechanical, assembly and installation drawing is a plus. ? Proactive and able to work with minimum supervision to meet tight deadlines in fast-paced environment. Interested candidate may click "apply" or email *All applications and personal data will be treated with the strictest confidence within CSE-Transtel HR.(ID: 67876864...
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       
Preferred Location: Singapore

C****tel
 [?]
Sign in to view client's details.
| C****tel
|    Singapore
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jan 15, 2015  |  Closed  |   24 Proposals
About the position Our company is looking for an organized and detailed drafter. Our drafters create 2D marketing/sales floor plans for residential and commercial properties. As a member of our team you'd be offering the highest quality and most accurate floor plan products for square footage. The position is part-time and offers competitive pay on a contract basis. About the skills we look for We only hires self-motivated people with the ability to excel in a fast paced and flexible environment. We require experience with Computer Aided Drafting (CAD) software, specifically Microsoft Visio. The ability to complete tasks quickly and implement quality assurance processes to ensure accuracy is our key to providing the best product to our clients. Our commitment to deadlines and 'follow through' is our key to providing the best service. Requirements *BA or BS in interior design, architecture, or any field that requires computer drafting. *Highly reliable (emails promptly and complete...
Category: CAD       

M****ent
 [?]
Sign in to view client's details.
| M****ent
|    United States
Fixed Price: Not Sure   |  Posted: Jan 15, 2015  |  Closed  |   16 Proposals
I need a cup dispenser designed. The dispenser will hold around 30 small paper cups that will be used by the sink in the bathroom to rinse your mouth. The design must be as detailed as possible and be made out of plastic. I can include pictures for you to design from, however you MUST make it different. For example, the mechanism where you open the front cover to put cups in has to be different. Maybe a different clip/locking mechanism to close the front cover. In the design, you will have to provide measurements too. If easier, I can provide you with the measurements of the actual dispenser. This product will be made by a manufacturer so you must have knowledge in this department. The product has to be designed well so that it is easier and cheaper to make. If you are applying to this job, please send me your previous work sample. Candidate must be good at communication and must be available to connect with me through skype or e-mail. They must be available anytime from 6 - 11 PM E...
Category: CAD       
Skills: 3D Modeling, AutoCAD, Manufacturing Design       

N****Box
 [?]
Sign in to view client's details.
| N****Box
|    United States
Fixed Price: $100 - $150   |  Posted: Jan 14, 2015  |  Closed  |   24 Proposals
I need one Floor Plan AND (2) Sections. 1.COVER SHEET 2.SITE PLAN 3.FLOOR PLAN 4.SECTIONS 5.PHOTOS Please email me. I will upload the CAD FILES to use for this project. I have the existing SITE PLAN, FLOOR PLAN, AND COVER SHEET. I have one SECTION FOR REFERENCE ONLY.
Category: CAD       

****
 [?]
Sign in to view client's details.
| Client
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Jan 13, 2015  |  Closed  |   0 Proposals
I need a cup dispenser designed. The dispenser will hold around 30 small paper cups that will be used by the sink in the bathroom to rinse your mouth. The design must be as detailed as possible and be made out of plastic. I can include pictures for you to design from, however you MUST make it different. For example, the mechanism where you open the front cover to put cups in has to be different. Maybe a different clip/locking mechanism to close the front cover. In the design, you will have to provide measurements too. If easier, I can provide you with the measurements of the actual dispenser. This product will be made by a manufacturer so you must have knowledge in this department. The product has to be designed well so that it is easier and cheaper to make. If you are applying to this job, please send me your work. Candidate must be good at communication and must be available to connect with me through skype or e-mail. They must be available anytime from 6 - 11 PM EST US time.(ID: ...
Category: CAD       
Skills: 3D Modeling, AutoCAD, Manufacturing Design       

N****Box
 [?]
Sign in to view client's details.
| N****Box
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: 7-9 months  |  Posted: Jan 08, 2015  |  Closed  |   1 Proposal
We specialise in the installation of Glass Splashbacks to Kitchens and Bathrooms, we are looking to build a software that will work both on desk top in the office or on an I pad on customers premise, the user will select a shape and measure and add the glass sizes, this will then provide the customer with a view of what her new glass Splashbacks will look like, and will also provide our factory with a production cutting list. Please review our website to get an understanding of our products   [obscured]   - please do not email us directly through our website as we will only work through Elance. Emailing us we will simply block you from all opportunities!!! Thank you
Category: CAD       
Skills: ArchiCAD, AutoCAD, ArtiosCAD, AutoCAD 2012, ACID Pro       

G****968
 [?]
Sign in to view client's details.
| G****968
|    United Kingdom
Hourly Rate: $10 - $15 / hr   |  Duration: 7-9 months  |  Posted: Jan 04, 2015  |  Closed  |   11 Proposals
We specialise in the installation of Glass Splashbacks to Kitchens and Bathrooms, we are looking to build a software that will work both on desk top in the office or on an I pad on customers premise, the user will select a shape and measure and add the glass sizes, this will then provide the customer with a view of what her new glass Splashbacks will look like, and will also provide our factory with a production cutting list. Please review our website to get an understanding of our products   [obscured]   - please do not email us directly through our website as we will only work through Elance. Emailing us we will simply block you from all opportunities!!! Thank you
Category: CAD       
Skills: ArchiCAD, AutoCAD, ArtiosCAD, AutoCAD 2012, ACID Pro       

G****968
 [?]
Sign in to view client's details.
| G****968
|    United Kingdom
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job