Save this Search
     
Sort by:
  • Posted Date
Engineering & Manufacturing
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 9h, 39m ago  |  Ends: 14d, 14h  |   2 Proposals
Hi everybody, I'm posting here on behalf of my company recently created. We are planning to launch few baby products in the coming months, and among them we have a baby blankets. For those who do fabric design, we're wondering if you could provide us with a design similar to this one in style :   [obscured]  -fee.ca/wp-content/uploads/2014/04/image1.jpg We would like to have a baby sitting over a throne with a crown over his head and a cloak floating behind him! Do you think you'd be able to this? How much time will it take? And how much do you estimate the price? :) Thank you very much, Have a nice day.
Category: Product Design       

m****204
 [?]
Sign in to view client's details.
| m****204
|    Canada
Fixed Price: Not Sure   |  Posted: 10h, 24m ago  |  Ends: 14d, 13h  |   16 Proposals
A portable, small, table top device that holds an iPhone and rotates to allow for 360 degree picture taking. Initial deliverable is CAD files (compatible with Solidworks) of the device. Potentially interested in 3-5 different design concepts. May require iterations after I 3D print the device. Please respond with a quote for your cost and timing to deliver the files.
Category: Product Design       

J****Jim
 [?]
Sign in to view client's details.
| J****Jim
|    United States
Fixed Price: Less than $500   |  Posted: 11h, 34m ago  |  Ends: 14d, 12h  |   0 Proposals
I need to have a privacy screen prototype made for mobile phones. If you have any experience, please contact me.
Category: Product Design       

s****nou
 [?]
Sign in to view client's details.
| s****nou
|    United States
Fixed Price: Less than $500   |  Posted: 11h, 39m ago  |  Ends: 14d, 12h  |   1 Proposal
I am looking for a fully magnetic ring (13/16" inner diameter). With .1 carat zirconia (3mm in size) stuck on all around (see images below) leaving an 1 gap on the top of the ring, roughly 1 cm. Please advise if you have any questions, and i do apologize if the description is not very clear. Thank you, Giuliano
Category: Other - Engineering &...       
Skills: Industrial Design, Manufacturing Design       

G****a90
 [?]
Sign in to view client's details.
| G****a90
|    Canada
Fixed Price: $500 - $1,000   |  Posted: 18h, 9m ago  |  Ends: 14d, 5h  |   8 Proposals
  [obscured]   We have this product available from our business. A 3'x4'x5" platform that absorbs impact sound for electric drum sets. Our current problem is that these are too large and too heavy to ship across the country. As demand rises we need to find a solution to make these break down in to lightweight shippable pieces so that they can be shipped. Also we would like to be able to have the specs sent to a manufacturer. Understanding of sound isolating materials may help but not necessary. Also we will consider meeting in Los Angeles an option to show you the prototype that we have.
Category: Product Design       

r****dia
 [?]
Sign in to view client's details.
| r****dia
|    United States
Fixed Price: Not Sure   |  Posted: 21h, 18m ago  |  Ends: 14d, 2h  |   5 Proposals
Hi, We have a floating wall shelf with a hidden compartment inside to hold a handgun or rifle. Right now we use magnetic keys to lock and open it. As seen here --   [obscured]  /watch?v=Gzo6Ypvh1Hg We REALLY want to upgrade this system to a better mechanical type lock but I'm not sure how that would look and where it would go. Or maybe even a better version of biometric lock? We're looking for input and ideas ... Jeremy
Category: Other - Engineering &...       

J****183
 [?]
Sign in to view client's details.
| J****183
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 22h, 11m ago  |  Ends: 14d, 1h  |   14 Proposals
I am developing a product related to the sport medicine field. It is a hand held device which has cutting components. Starting from scratch. Looking to get help with design and CAD drawings to prepare for prototyping. Must sign NDA. Will give more details later.
Category: Product Design       

M****ift
 [?]
Sign in to view client's details.
| M****ift
Fixed Price: Not Sure   |  Posted: 23h, 19m ago  |  Ends: 14d, 0h  |   1 Proposal
I need people to make a closed checkout point . A closed cashier machine ( you put the money inside the cashier gives you the change back) . A closed coin machine ( you put the coin inside and the coin machine gives you the change back) . A 'dropbox' that you put on the cashier in the closing time and it empties the all the cash from the cashier and then you can put all the money on a safe or a main closed cashier I need everything on the project unless the part of the drawning of the models ( get it already) If you're interested don't hesitate to take contact or ask anything you wonder about this project.
Category: Mechanical       

d****111
 [?]
Sign in to view client's details.
| d****111
|    Norway
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 23h, 32m ago  |  Ends: 89d, 0h  |   2 Proposals
I like to find somebody to make the design of automatic hair cutter may be same as the bellow:   [obscured]  /watch?v=7HejC2lTet4 But should be higher technical than it. I prefer 3D scanning firstly and choose the hair styles from computer. Or sample one firstly and develop it. I'm 4 companies owner and the above is one of my dream because no barber make me satisfied till now,I'm sure you too.Ok LET'S DESIGN FOR OURSELVES AND CHANGE THE WORLD.
Category: Product Design       

t****xus
 [?]
Sign in to view client's details.
| t****xus
|    United States
Fixed Price: Not Sure   |  Posted: 23h, 33m ago  |  Ends: 29d, 0h  |   2 Proposals
Have basic design concept for a product that will make animal waste removal more efficient, but need specifics as far as size of components accompanied by images, and possible materials/tooling ideas. Also need to figure out a way of powering the apparatus. Familiarity with the vacuum industry would be useful but not required. Must be willing to sign NDA.
Category: Electrical       

l****mer
 [?]
Sign in to view client's details.
| l****mer
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: May 27, 2015  |  Ends: 13d, 23h  |   1 Proposal
I currently have an app in the app store and I'm looking for a general QA tester to find and reproduce bugs and crashes. Once the bugs our found I need a report on how to reproduce them. QA test must have iOS devices running the latest OS version. Ideally Iphone 6. In particular we are looking to fix some bugs related to iCloud and data saving that seem to be affecting about 1% of customers at this time.
Category: Other - Engineering &...       

j****sax
 [?]
Sign in to view client's details.
| j****sax
|    United States
Fixed Price: Less than $500   |  Posted: May 27, 2015  |  Ends: 13d, 15h  |   8 Proposals
I need to design one of my portable power back system cosmetic design. the dimension (W*L*H) is 192mm*385mm*231mm. You can refer to the attached related products.
Category: Product Design       

b****xie
 [?]
Sign in to view client's details.
| b****xie
|    China
Fixed Price: $5,000 - $10,000   |  Posted: May 26, 2015  |  Ends: 39d, 5h  |   6 Proposals
A growing company in the Energy Services arena is looking for an Electrical Engineer to manage the design and development of Dynamic Power Factor Optimization devices for industrial and commercial facilities. Dynamic devices will switch capacitor banks on demand depending on the value of the power factor. Devices will have wireless communication capabilities to transmit data from the device to local or remote servers. Engineer will also be responsible for conducting on site studies to evaluate the energy savings opportunities and sizing of capacitor banks at each facility in order to optimize power factor and maximize energy savings. Other responsibilities include creating training and support programs for the company's resellers to perform facility energy audits and manage their own installations. Qualifications required: B.S. in Electrical engineering, P.E. Electrical Engineer, 10 years of experience in power factor correction optimization/Power Electronics
Category: Electrical       

r****oya
 [?]
Sign in to view client's details.
| r****oya
|    United States
Fixed Price: Less than $500   |  Posted: May 26, 2015  |  Ends: 5d, 1h  |   16 Proposals
We are looking for an industrial designer that will help us to project an aluminum case for our power pack. The power pack contains lithium batteries; the total volume is 25 x 50 x 10 cm. So we imagine a case of around 26 x 51 x 11 centimeters (we will insert the battery pack from one side of the case ? please consider the feasibility of the process in your concept ideas). The designer has to submit 3 proposals of design, preferred made through renders with right material, considering our specifications (attached file). After we?ve chosen a solution, we will ask to realize a CAD file to engineering the concept design. The job is quite urgent, we may ask the first release (2-3 images for the 1st concept design) until 2 days after the hiring. NOTE: The main task is that the object should be "beautiful" not just practical!
Category: Product Design       

A****SPA
 [?]
Sign in to view client's details.
| A****SPA
|    San Marino
Fixed Price: Not Sure   |  Posted: May 26, 2015  |  Ends: 19h, 34m  |   10 Proposals
Looking for some one to design a preform mould for plastic bottle. The said mould will be manufactured on a HAAS milling machine from a ESPRIT software.
Category: Other - Engineering &...       

P****e54
 [?]
Sign in to view client's details.
| P****e54
|    Mauritius
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 26, 2015  |  Ends: 12d, 16h  |   11 Proposals
We have hundreds of industrial machines for manufacturing processes. Most of these machines have simple control panels and are not connected to the corporate network in any way. We would like to connect some of these machines to the corporate network and log the status of the machines to a central database. This way we can perform analysis on the machines. The first machine that we would like to attempt this for is a knitting machine. After opening the front panel of the machine, we see Molex styled connectors used to connect the front panel to the main logic boards of the machine. We have also found documentation that clearly describes the pin outs. We would like to tap into these connections and connect them to a Particle (  [obscured]  /prototype) Core or Photon. These prototyping boards are Arduino-like, but also come with a strong management platform. Much of the information that we want to capture is simple on/off status information. For example, is the door of the mac...
Category: Electrical       

h****ang
 [?]
Sign in to view client's details.
| h****ang
|    Hong Kong SAR, PRC
Fixed Price: Not Sure   |  Posted: May 26, 2015  |  Ends: 12d, 15h  |   12 Proposals
Hello, I would like to develop a product that can be placed on an acoustic guitar sound hole, above the strings, that can hold a pick. Here are the properties, which are also written on the attached pdf: 1. Should be elegant; a high quality product. It can't hurt the finish of a guitar. 2. It can be made of wood and/or a type rubber. I'm open to other textures. 3. It should also be the same color as a guitar. I attached a picture with the 2 types of brown that I imagine, or black. I believe the color is "sunburst brown" 4. The holder is similar in shape to a bobby pin, or Kyser guitar capo (also attached). I'm open to other designs, but the drawing of my idea is attached. 5. It should be flexible, yet hard. Part of the product will be going inside a guitar sound hole, and since the bracing inside most guitars vary, I'm trying to find a "one size fits all" type product. 6. Lastly, the pick is held tightly, but also the edge should slightly pop out, so that ...
Category: Contract Manufacturing       

a****123
 [?]
Sign in to view client's details.
| a****123
|    United States
Hourly Rate: $10 - $25 / hr   |  Duration: Not Sure  |  Posted: May 26, 2015  |  Ends: 12d, 14h  |   7 Proposals
We are a small company based out of Australia looking for someone with solid knowledge of the SUP industry to assist with Paddleboard shaping and also branding / colours etc. Presently we have a range of about 6 boards and are keen to develop the range and make them as professional as possible. If you have CAD shaping knowledge, SUP knowledge and also Graphic design knowledge we want to hear from you. Ongoing work for the right person
Category: CAD       

d****ine
 [?]
Sign in to view client's details.
| d****ine
|    Australia
Fixed Price: Not Sure   |  Posted: May 25, 2015  |  Ends: 12d, 4h  |   4 Proposals
I am looking for a manufacturer who can produce the gutter hanger as shown in the attached files or something similar. I would like the quote to include the screw. The material for the bracket itself is aluminum with mill finish. Quantity would initially be 10,000 brackets at a time. I am open to any design modifications which would reduce production costs. Due to shipping costs, any non-US manufacturer would need substantially lower costs for my consideration.
Category: Contract Manufacturing       

C****Ext
 [?]
Sign in to view client's details.
| C****Ext
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: May 25, 2015  |  Ends: 12d, 1h  |   5 Proposals
Our new product will require: - Ability to track via GPS - Ability to track a 1 inch diameter "ring" shape, tracking device will need to be inserted in this ring - App that cant be logged into and tracked - website to be logged in to track - web design front end and back end - Require, initially 1000 models of this (max. $18 per model) - Require 50,000-200,000 per year (max. $14 per model) Budget of $1000 to $5000 Includes: - 3 year commitment and contract - 1 prototype full functional within 12 weeks - fully functioning website - fully functioning App - Design will be explained and detailed via email
Category: Product Design       

i****ays
 [?]
Sign in to view client's details.
| i****ays
|    Canada
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job