Save this Search
     
Sort by:
  • Posted Date
Fixed Price: Not Sure   |  Posted: Nov 30, 2015  |  Closed  |   15 Proposals
We need a landscape plan for a development at 333 Mann Street Gosford 1. floor plans for 3 sections Street scape, Japanese Garden, Podium 2. Report 3. Cross sections showing Street Scape - needs to refer to the occuls link attached Japanese Garden (South) - need to sell as no sunlight, connect with roof top- way to do is to show a cross section japanese garden with podium, hanging garden of Babylon, the stairs are open to the elements to on the east on south corner Podium (to the roof) Ground Level to follow Oculus street scape guild lines in link below for the ground level Please find a link to the document you requested. The password is Oculus.   [obscured]  /index.php/s/4GdKs8cmFIZknNu Landscaping queries: 35. Podium roof with landscaping- is this communal, useable space for residents, or to be used for commercial tenants? (note- Design Guide calls for communal open space for residents). How will access be achieved- stairs, lift? And how will access...
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

j****per
 [?]
Sign in to view client's details.
| j****per
|    Australia
Fixed Price: Not Sure   |  Posted: Nov 12, 2015  |  Closed  |   11 Proposals
I have a single lot which can be developed into around 8-10 units/apartments. I would like a concept layout plan showing how the units and access could be accomodated on the site. This is concept design only. I can provide cadastral boundary aerial image Design parameters (minimum unit size, setback, height to boundary, service and living court sizes) You will need to do the following: trace contours on the site to define the terrain (I can provide a link to online GIS viewer) trace the EPO layer (i.e. environmentally protected area we should avoid if possible) Develop a concpt layout to maximise the number of units/apartments while including accessway, service & living courts as per local regulations. Design of the actual units can be very conceptual - but should allow for 3-4bdm and around 130-140m2 each. They will likely be 2-storey. I need this concept by the end of the weekend. Deliverable will be a coloured A3 plan layout in a "landscape design" (concept/sket...
Category: Architecture       

w****lgf
 [?]
Sign in to view client's details.
| w****lgf
|    New Zealand
Fixed Price: Not Sure   |  Posted: Nov 11, 2015  |  Closed  |   5 Proposals
We are in search of a California Licensed Landscape Architect that can assist us in designing and creating landscape plans and irrigation plan. We have a single family residence in the middle of plan check and we were asked to submit landscaping package. The timeline will be very quick as we are trying to re-submit by next week. Our project is located in Bonita, an unincorporated area of the County of San Diego. Look forward to seeing your proposal.
Category: Other - Engineering &...       
Skills: 3D Modeling, AutoCAD, Manufacturing Design       

m****ita
 [?]
Sign in to view client's details.
| m****ita
|    United States
Fixed Price: Not Sure   |  Posted: Nov 05, 2015  |  Closed  |   0 Proposals
We are in search of a California Licensed Landscape Architect that can assist us in designing and creating landscape plans and irrigation plan. We have a single family residence in the middle of plan check and we were asked to submit landscaping package. The timeline will be very quick as we are trying to re-submit by next week. Our project is located in Bonita, an unincorporated area of the County of San Diego. Look forward to seeing your proposal.
Category: Civil & Structural       
Preferred Location: United States

m****ita
 [?]
Sign in to view client's details.
| m****ita
|    United States
Fixed Price: Not Sure   |  Posted: Nov 05, 2015  |  Closed  |   1 Proposal
We are in search of a California Licensed Landscape Architect that can assist us in designing and creating landscape plans and irrigation plan. We have a single family residence in the middle of plan check and we were asked to submit landscaping package. The timeline will be very quick as we are trying to re-submit by next week. Our project is located in Bonita, an unincorporated area of the County of San Diego. Look forward to seeing your proposal.
Category: Other - Engineering &...       
Skills: 3D Modeling, AutoCAD, Manufacturing Design       

m****ita
 [?]
Sign in to view client's details.
| m****ita
|    United States
Fixed Price: Not Sure   |  Posted: Nov 05, 2015  |  Closed  |   2 Proposals
We are in search of a California Licensed Landscape Architect that can assist us in designing and creating landscape plans and irrigation plan. We have a single family residence in the middle of plan check and we were asked to submit landscaping package. The timeline will be very quick as we are trying to re-submit by next week. Our project is located in Bonita, an unincorporated area of the County of San Diego. Look forward to seeing your proposal.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: United States

m****ita
 [?]
Sign in to view client's details.
| m****ita
|    United States
Fixed Price: Less than $500   |  Posted: Nov 02, 2015  |  Closed  |   10 Proposals
Hi There JOB DESCRIPTION This job is the extension and renovation of an existing dwelling and so the selected candidate will be required to model up the proposed sketch design with tropical landscaping. We have provided the existing house drawings in ArchiCAD, SketchUP, DWG and PDF format to allow flexibility in modelling. Existing house has been modelled up in ArchiCAD and SketchUP so this should help reduce the amount of work required. Once the proposed model has been completed to a preliminary standard, we will require the model back so that we can choose the views we require to be rendered. At this stage we will also provide information on the finishes and materials to be used in the render. There will be no more than 10 rendered views required, but there could possibly be less. Rendered views will include both internal and external views so the selected candidate must be capable in providing photo-realistic renders for all areas with tropical landscaping. FURTHER INFORMATION ...
Category: 3D Modelling       

****
 [?]
Sign in to view client's details.
| Client
|    Australia
Fixed Price: Not Sure   |  Posted: Oct 31, 2015  |  Closed  |   16 Proposals
looking to build a pre-fab garage/automotive shop with attached living area as well as storage space. the building will need to be designed based on available materials as well as to scale with accurate and well documented dimensions in accordance to the current standards and building codes. Deliverable's: 1. All source files including complete Assembly as well as individual component CAD files. -- each component and/or part drawing should be serial numbered and labeled with descriptions/materials, etc in an extremely neat and organized manner. 2. complete design package both in CAD as well as pdf format with accurate dimensions in accordance with the civil engineering and architect standards. 3. All 3D rendering source files 4. complete bill of materials 5. interior renderings 6. exterior renderings including driveway and concrete areas 7. exterior renderings w/ landscape etc. 8. complete design presentation document consisting of cost estimates and time estima...
Category: Architecture       

****
 [?]
Sign in to view client's details.
| Client
|    United States
Fixed Price: Less than $500   |  Posted: Oct 28, 2015  |  Closed  |   13 Proposals
Need two drawings for new house build permit in PDF. Site plan showing house on map with distance to property borders. Terrain cut with heights on old and new terrain. No 3D, no render, no grapchics, no interior design. Only two pdf drawings. Attached: Two old example drawings with wrong house. New house drawings. Description where I need house on map (6meter from west border, 4meter from south border). Terrain CAD DXF files. Proposals over 100USD will not be considered.
Category: CAD       
Skills: Landscape Design, AutoCAD, SolidWorks       

j****sen
 [?]
Sign in to view client's details.
| j****sen
|    Norway
Fixed Price: Less than $500   |  Posted: Oct 27, 2015  |  Closed  |   19 Proposals
Need landscape and elevation drawings for new house build. Elevation with old and new landscape and house heights. DXF CAD terrain files and description attached
Category: CAD       

j****sen
 [?]
Sign in to view client's details.
| j****sen
|    Norway
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Oct 25, 2015  |  Closed  |   37 Proposals
I would like to have a professional designer create ideas and concepts for my new apartment, it is a 180 M2 apartment with around 150 m@ outdoor terrace areas. The deliverables will include : - Full Conceptual design Internal +External - Advice on needed extensions rooms ( Outside extension to Kitchen room, and side extension to master bedroom) - Mood board and color theme - Full 3D Renders of indoor and outdoor area ( Including landscaping design ) a full brief will be provided once a portfolio has been submitted.
Category: Interior Design       
Skills: 3D Modeling, Interior Design, SketchUp Pro, ACPI       

a****bak
 [?]
Sign in to view client's details.
| a****bak
|    Jordan
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: Oct 19, 2015  |  Closed  |   13 Proposals
I am looking for someone to create complex dot to dot vector images consisting of, but not limited to, animals, landscape, shapes, buildings, cars, trains, etc. Looking to ultimately obtain around 30 images but would like to pilot with a few to start, then proceed further.
Category: Architecture       

r****is2
 [?]
Sign in to view client's details.
| r****is2
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Oct 19, 2015  |  Closed  |   16 Proposals
This project is for a physical model of a proposed Dining Hall Renovation and Expansion at The Hill School Campus located at 717 East High Street, Pottstown, PA. We are now working on the Design Development phase. Scope: Produce a carry-on model at 1/16" = 1'-0" scale with a size restriction of approximately 14"wide x 22"long x 9" high. The project comprises the renovation of an existing Dining Hall building and various additions. The model will include the existing dining hall building, the new garden room addition, the exterior headmaster's garden, the surrounding driveways, landscaping and a block out of two surrounding buildings. Please follow this link to download drawings for the extent of the model, the plans, elevations, sections and the exterior renderings in CAD and PDF formats:   [obscured]  /sh/c0ik7csz2xo9mae/AACqQdPTCP5QYFEIGQNshpCVa?dl=0 The model is to convey a level of realism of the building and the surrounding topographic feat...
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

z****man
 [?]
Sign in to view client's details.
| z****man
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: Oct 15, 2015  |  Closed  |   26 Proposals
New Childcare Centre needs to have plans drawn for outdoor playspace,with 3D flythrough to also be provided for viewing on computer. This requires people with landscape drawing experience and drawing package like Dynascape and Sketchup, all building and internal drawings are already complete, the building is complete. The outdoor space needs to be a nature playground style. I will provide site plan dxf file and hand drawn suggested layout of the plaspace with suggested elements to be included along with Pinterest ideas to help explain the required finished project. You must have landscape package and experience in the drawing package and previous jobs to show in your portfolio.
Category: 3D Modelling       
Skills: SketchUp, 3D Design, Dynascape       
Preferred Location: Australia/Oceania

H****ghL
 [?]
Sign in to view client's details.
| H****ghL
|    Australia
Fixed Price: Not Sure   |  Posted: Oct 13, 2015  |  Closed  |   21 Proposals
Currently need a landscape plan and report for a building. Please see the attached drawings and an example of a similar report The drawings need landscaping added. Please add your email so i can email you an example of similar plans to work from and also a guidline which you need to follow.
Category: Architecture       

j****per
 [?]
Sign in to view client's details.
| j****per
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Oct 02, 2015  |  Closed  |   10 Proposals
hello, I'm looking for someone to be a project manager for rehabbing distressed homes. This job will entail tracking the progress of contractors through various stages of construction. Skills needed for this position include construction management, landscape, and interior design, as well as, basic accounting.
Category: Other - Engineering &...       

e****ife
 [?]
Sign in to view client's details.
| e****ife
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Oct 01, 2015  |  Closed  |   47 Proposals
Here's what we need: In order to do this work we DO NOT require you to be a licensed engineer in the state of Ohio or an engineer at all. We are looking for someone to complete the below work and we will have our own engineers sign off on the work YOU complete. We have the pre engineered steel building drawings already done. Now we are looking for the following in addition to the engineered steel building drawings. If you can complete most of this then please bid with what you are looking to do. The building we are building is an addition to an existing building. Rough dimensions are 330L ft x 30' W ft x 35' H with a flat roof. I will send the drawings of the building along with pictures and anything else you may need as soon as you win the bid. 1. site plan 2. grading plan 3. elevations 4. electrical plans 5. mechanical plans 6. plumbing plans 7. architectural plans 8. foundation drawings Looking for someone who can devote time right away to this project as we need...
Category: Architecture       

t****inc
 [?]
Sign in to view client's details.
| t****inc
|    United States
Fixed Price: Less than $500   |  Posted: Sep 26, 2015  |  Closed  |   8 Proposals
I am preparing a Feasibility Study for a proposed mixed-use development. The building site has a very odd shape to it. I need to determine and show the client if the site is able to hold the proposed building and parking. You will need to supply the following: Color PDF conceptual site plans indicating three (3) possible ground-floor "footprints" of the building, 10" set backs on all property lines and 26' setback from the center of the road, vehicle access, parking for 10 vehicles, landscaping elements. The building foot print is to be between 3,000 and 3,500 sq/ft. The ground floor is to divided into 2 office spaces, each one between 1,500 and 1,750 sq/ft. No floor plan details are required, only a basic footprint. One of the three plans will need to divide the floor plan into 2 buildings. The first with a foot print of 1,500 sq/ft and the second 2,000 sq/ft. Proposal must be less than US$100. I need to get this done over the weekend, to be able to submit ea...
Category: Architecture       
Skills: Architecture, AutoCAD       

I****ion
 [?]
Sign in to view client's details.
| I****ion
|    Grenada
Fixed Price: $1,000 - $5,000   |  Posted: Sep 22, 2015  |  Closed  |   31 Proposals
I have attached a rough drawing outline. I was actually thinking of an L-shape design for the right side of the property including the part in front of the pond. If possible I would like the northern portion built along the pond edge like a seawall for I plan on a restaurant there. I would like the buildings opened for tenants to plain their own build outs. I would like this built with the least amount of maintenance as possible. Was thinking of an average width of 70' for the L-shape and 50' for the left building. Parking lot and landscape design as well please. There is about an acre in a pie shape that is available in the front of the property. In the next few years the highway will be expanded to 6 lanes. In the future may consider adding solar panels to the roof and also a green house above the restaurant. There is a water well on the property that we will use for water. The property is currently a concrete batch plant with an unknown cement pavement thickness. Would ...
Category: Architecture       

F****011
 [?]
Sign in to view client's details.
| F****011
|    United States
Fixed Price: Less than $500   |  Posted: Sep 21, 2015  |  Closed  |   16 Proposals
We want to take the attached PDF blueprints and create images that we can print to canvas (or simply print on a blueprint printer) so that we can hand the images on our wall. We want a horizontal blueprint image of: Hole number 9 Hole number 18 An example of the blueprint style we are looking for is here:   [obscured]  /products/augusta-national-golf-club And we want a color topography of the entire course similar to the PDF attachment but we want to use the actual drawings. We also want to include the architects seals and stamps. We have permission from Nicklaus Design to do this for our personal use. We need the final images to be high resolution so that we can choose the size of the prints we want going forward. If you have questions, please PM me.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

m****500
 [?]
Sign in to view client's details.
| m****500
|    United States
Fixed Price: Less than $500   |  Posted: Sep 18, 2015  |  Closed  |   3 Proposals
I have a detailed (scaleable vector) PDF of a preliminary landscape design for our home that I would like to have translated into Chief Architect Format (I own Home Designer Architectural 2016) so that I can manipulate the individual hardscape elements in position and size and render in 2D on my own. Extrapolation to 3D before or after I have done my manipulations would be a bonus if it can be done quickly. It does not need to be overly detailed as I can update the object elements on my own, but does need to be done quickly and I don't have enough time and skill yet to do this quickly on my own. I would need a fixed price quote as this is for personal use. I can provide a PDF of the landscape rendering, plus original PDF plans, elevations and dimensions for the original house and deck design that it is based upon (and can provide any direction in terms of identifying objects or dimensions in the landscape PDF). Rendering the house (beyond skeleton and entrances) plants or grades i...
Category: 3D Modelling       
Skills: Landscape Design, 2D Design, Chief Architect       

w****rpa
 [?]
Sign in to view client's details.
| w****rpa
|    Canada
Fixed Price: Not Sure   |  Posted: Sep 17, 2015  |  Closed  |   17 Proposals
need a landscape plan for a drought tolerant yard mostly rock and some small plants and one tree for a front yard in California no cactus they dont want it to look to much like a desert. i need it done in two days just a rought design with drought tolerant plant. and one tree on the front corner
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

J****son
 [?]
Sign in to view client's details.
| J****son
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job