Save this Search
     
Sort by:
  • Posted Date
Fixed Price: $1,000 - $5,000   |  Posted: Jun 21, 2015  |  Closed  |   7 Proposals
I make and sell plastic injection molds. I make them in China and I sell them internationally (90% to USA, 10% so far to Europe). I received information that I could use LinkedIn as a marketing tool to get inquiries from people searching for plastic injection molds. My target market is engineers of mid to large companies who are making products for their company, or smaller custom molding companies where the owner is typically the engineer too and he will inquire from me to make molds. Mid level tooling companies and mid level molding shops typically have an engineer who does what I do so its more difficult to get their business. My current LinkedIn page gets about 10 hits a week, mostly from marketing girls from China trying to get me to buy a mold from them, which I don't need. The advertisement given to me said for a ridiculous price, I could get about 400 inquiries per week from my target market. Does anyone know how to do this? This project will lead to 2 other new projects; one ...
Category: Contract Manufacturing       
Skills: Research, Manufacturing Design, sourcing       

r****eym
 [?]
Sign in to view client's details.
| r****eym
|    United States
Fixed Price: Less than $500   |  Posted: Jun 17, 2015  |  Closed  |   9 Proposals
Need to design a high speed counting circuit to detect the time difference between two separate signal pulses with 1nsec resolution. The leading edge of signal 1 pulse should start the count cycle, and the leading edge of signal 2 pulse should terminate the count cycle. Please advise on most appropriate design. I have been envisioning synchronous counters clocked at 1 Ghz with a total of 32 bits, which could pass data through shift register(s) for transfer of data to unknown interface (possibly FPGA). Counting cycle could be enabled with signal from a latching comparator, and disabled by the signal of an additional comparator. Once the count is collected, the cycle is reset for the next set of pulses. I have data sheets of circuit components that may work but am uncertain if they are the most appropriate selections. Deliverable includes selection and refinement of circuit components with associated BOM, generated circuit schematics, and associated PCB layout files. Phase 1 - Select...
Category: Electrical       

b****986
 [?]
Sign in to view client's details.
| b****986
|    United States
Fixed Price: Less than $500   |  Posted: Apr 25, 2015  |  Closed  |   5 Proposals
Task: You will need to creat 3D model from input folder that could be Images, sketchs, technical drawing, and to apply texture (that must be UVW Projectionh and export them to collada extension .DAE i will provide pluging export later. requirements and quality: 1. 3D format must be compatible with 3D studio Max 2010. Other formats than .max will not be authorized. 2. 3D modeling, textures and UVs must be homogenous. Avoid graphic style or quality differences among different models or on a single model. 3. The result must match the product references that have been provided. 4. Scale and dimensions must be precise and correct. 5. 3D modeling must be « low poly » and optimized by following Triangulation paragraph's requirements. 6. Useless or hidden polygons and edges must be deleted. 7. An overly low tessellation making triangulation too visible will not be accepted. 8. Surface normals must be correctly oriented. No reversed surfaces. 9. A 3D model must contain an ambient map and at ...
Category: 3D Modelling       
Skills: Autodesk, Engineering Design       

Y****nne
 [?]
Sign in to view client's details.
| Y****nne
|    Morocco
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 19, 2015  |  Closed  |   7 Proposals
The Role: ? As industrial designer, you´ll work as a team-player in multidisciplinary teams or in a more independent way, to create successful products for a global brand that tell solid stories and provide great user experience. ? You will be asked to generate innovative and waterproof concept designs with a User Cantered Design approach: ? You will be asked to carefully shape products down to the very detail to make life easy for the users. ? You will conduct field-research and synthesize results to guide concept design phases. ? You will aim at a rationalist, minimal and elegant design, always consistent with requirement specifications and fitting into a greater product portfolio design language. ? You will be challenged to ideate mechanic and kinematic solutions to be developed jointly with engineering teams. ? You will ensure the feasibility of your ideas by exploring alternative solutions in terms of product architectures, material and manufacturing processes. ? You will test a...
Category: Product Design       
Preferred Location: Sweden

T****tal
 [?]
Sign in to view client's details.
| T****tal
|    United Kingdom
Fixed Price: More than $10,000   |  Posted: Nov 12, 2014  |  Closed  |   6 Proposals
Position: Electrical Engineer / Power Supply - Battery Developer Are you currently or in the past worked with power sources, power supplier and or batteries? DS Ultra Wireless has a unique opportunity for a dependable and capable power supply and/or battery developer to deliver forty (40) DS ULTRA WIRELESS POWER INDEPENDENT and SELF-SUSTAINING Power Sources (housing the power source as the new watch band) and twenty (20) AC/DC and DC/DC charging systems. Recently DS Ultra Wireless was notified by the U.S. Army Research Lab (ARL) that they will award a small development contract in December/January time frame. One of the new capabilities the U.S. Army wants is a Power Independent Self-Sustaining Power Source developed into the monitor / watch. DS Ultra Wireless is also looking for an Android OS Software Code Engineer and other Software tasks. Please provide your firm-fixed-price and time needed to complete the project. Components, I.E. Android OS smart phone watches, manufacture circ...
Category: Electrical       

D****ESS
 [?]
Sign in to view client's details.
| D****ESS
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Nov 07, 2014  |  Closed  |   13 Proposals
Seeking a consulting Mechanical Engineer / Designer working in Solidworks with experience in controls, linkage and off shelf components applicable to the present design of a new type of seating device, or workstation chair. 3D modelling most helpful. This is a new type of chair specifically oriented toward the long term sitter. It would have applications in the military, high end graphics workstations, call centers, home office and so on. Two issued patents, a full scale working Gen 1 prototype and Solidworks modelling exists. All chair functions are described and have been shown to work. This is currently being engineered as a Master's student project at a major university. Students are designing for an initial short run, or a Gen 2 prototype that will lead to future generations. What is needed is someone who can 1) examine and vet student designs, which will be produced in Solidworks; 2) make suggestions as to linkage and control assemblies; 3) make suggestions as to available...
Category: Mechanical       

W****970
 [?]
Sign in to view client's details.
| W****970
|    United States
Hourly Rate: $30 - $40 / hr   |  Duration: Not Sure  |  Posted: Nov 01, 2014  |  Closed  |   6 Proposals
Seeking an EE with specific expertise and experience in design, specification and manufacturing of energy storage systems for solar and wind generated power. Must have thorough knowledge of AGM and FLA batteries, charge controllers, inverters, bms, and other system components.I encourage "thinking outside the box". Initial need is part-time, but could lead to permanent lead engineer position. Would prefer person in Ft. myers, FL area. May also be an EB-5 opportunity for right person. Thank you.
Category: Electrical       
Preferred Location: United States

A****0_9
 [?]
Sign in to view client's details.
| A****0_9
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Sep 16, 2014  |  Closed  |   1 Proposal
Responsibilities: ? Lead and delegate day to day operations and manage vendor relations ? Establish criteria for Buy or Build solutions relating to JIRA ? Design and Develop gadgets/plugins ? Elicit business and technical requirements from project teams ? Develop schedules for migration activities ? Develop and deliver training on custom JIRA workflows and Advanced Issue Filtering ? Develop vendor relationships including beta programs allowing for first access at new versions ? Lead and mentor Operational team in their use of JIRA ? Be the front face of tools and processes within issue management, answering technical and procedural questions. ? Targets within 6 months to be accomplished include, but not limited: ? Develop abstracted, non-client specific workflow template with client-specific needs ? Migrate all existing custom client-specific workflows to new abstracted methods ? Propose and Implement custom security policies according to project needs ? Work with project teams to h...
Category: Other - Engineering &...       
Skills: Atlassian JIRA       
Preferred Location: United States

R****ive
 [?]
Sign in to view client's details.
| R****ive
|    United States
Hourly Rate: More than $50 / hr   |  Duration: 1-3 months  |  Posted: Aug 18, 2014  |  Closed  |   4 Proposals
Below is my general Job Description. Project in hand is a manufacturing and distribution center floor plan design layout for a 1 million sq. ft facility. Looking for good consultants to put on a call list for future work as well, see below: Collins' Lean Consulting is looking for a Lean Manufacturing Consultant to join their team. Collins' Lean Consulting's Operations Management consultants work with our clients to improve productivity, quality and delivery; eliminate waste on the plant floor and in "back room" operations; reduce inventory and lead time; improve the timing, quality and effectiveness of product development, commercialization and launch; identify and eliminate the root cause of problems, conform with quality standards, optimize warehousing and transportation, and measure results. Areas of Involvement: Typical engagements focus on improving the following business processes: ? Operations Planning & Execution ? Process Improvement / Continuous Improveme...
Category: Other - Engineering &...       

c****s46
 [?]
Sign in to view client's details.
| c****s46
|    United States
Fixed Price: Less than $500   |  Posted: Jul 06, 2014  |  Closed  |   7 Proposals
The grid was projected without any line until now however these lines should be installed later. The wind generator is based on the power_wind_dfig model and this block was extracted from the mathworks library. My very end purpose is to prove that the load frequency is much more stable with a storage solution (FESS or BESS) (49,95% until 50,1%). If necessary you can change the parameters of the model as you wish, or even change the models of the generators if necessary. I sent you some papers with the approach i want to implement in my model. I also sent you some information about the island grid itself. One of the articles, that I considered the main one, talks about a study that was made in the island I am studying. The study concludes about the instalation or not of storage solutions on the grid "Main Article - Porto Santo". Problem In small isolated power systems, such as those existing in certain small islands, the presence of 2 or 3 wind turbines creates a large inter...
Category: Electrical       
Skills: 3445, Power Converters, Power Systems       

J****ias
 [?]
Sign in to view client's details.
| J****ias
|    Portugal
Fixed Price: Less than $500   |  Posted: May 06, 2014  |  Closed  |   9 Proposals
The grid was projected without any line until now however these lines should be installed later. The wind generator is based on the power_wind_dfig model and this block was extracted from the mathworks library. My very end purpose is to prove that the load frequency is much more stable with a storage solution (FESS or BESS) (49,95% until 50,1%). If necessary you can change the parameters of the model as you wish, or even change the models of the generators if necessary. I sent you some papers with the approach i want to implement in my model. I also sent you some information about the island grid itself. One of the articles, that I considered the main one, talks about a study that was made in the island I am studying. The study concludes about the instalation or not of storage solutions on the grid "Main Article - Porto Santo". Problem In small isolated power systems, such as those existing in certain small islands, the presence of 2 or 3 wind turbines creates a large inter...
Category: Electrical       
Skills: Power Converters, Power Systems, Simulink       

J****ias
 [?]
Sign in to view client's details.
| J****ias
|    Portugal
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Apr 11, 2014  |  Closed  |   2 Proposals
This may be a bit of a reach but?..We are looking at out sourcing our sales and estimating. We are a small electrical contracting company in need of a sales and estimating time for a limited time. We would require lead generation for our services within a two hour travel radius. We would need lead to meet calls which one of our staff would follow up on to promote our services and possible projects for quotation. Then we would need assistance with estimates using our labour rates. The estimating process would require a detailed material list that we would then send for pricing. We are active in the Residential market both new single dwelling and large multi dwelling markets as well as the photovoltaic installations primarily microFIT. We are also interested in opening other market possibilities such as fixture re-lamping or upgrades for large factories and facilities quants approximately 40-80 Fixtures per project.
Category: Electrical       

a****one
 [?]
Sign in to view client's details.
| a****one
|    Canada
Fixed Price: $500 - $1,000   |  Posted: Mar 27, 2014  |  Closed  |   7 Proposals
¿ Day to day monitoring, scheduling & execution of installation activities of Electrical systems- Lighting circuits, Power socket outlets,Generators,Synchronising Panels, Distribution Panels & Control Panels. ¿ Installation of LV Panels, MDB, SMDB &DB for the power supply of power sockets, lighting loads, Air conditioning loads, LV Motors etc. ¿ Installation of Transformers, RMU s, Switchgears, isolator outlets. ¿ Installation & Erection of control circuits. ¿ Laying &Connection of LV cables to different pump motors. ¿ HV & LV Cabling and Cable tray works. ¿ Installation of Low current systems such as Fire Alarm system, Telephone & Data system,CCTV system,SMATV system, Intercom system. ¿ Leading the team of Supervisors, Foremen and electricians. ¿ Monitoring & providing support for the work of sub-contractors. ¿ Planning the work and effectively organizing the site facilities in order to meet the agreed program of deadlines. ¿ Prepare work schedules an...
Category: Electrical       
Skills: AutoCAD, Integrated Circuits, Electronics       

l****s21
 [?]
Sign in to view client's details.
| l****s21
|    United Arab Emirates
Fixed Price: $20 - $30   |  Posted: Mar 17, 2014  |  Closed  |   1 Proposal
Hi! I have a lead generation and vetting business helping people go solar. I need production support with commercial clients doing a remote site assessment. - Quick Google earth-pro presentation, - Estimated system size from square footage of property. - A shade analysis if possible as well. - Running the numbers for pricing per watt I specify - Calculating fed tax credit, accelerated depreciation, escalator, RIO, etc With the exception of the Google Earth-Pro stuff, this can all be accomplished with energy periscope, or another solar calculator. Be creative and give my clients all you would want if you were investing in solar. I'm very open to suggestions. This will be on a per report basis, and I will need turnover within 36 hours. Price per report is specified below. I anticipate 3 or less a week. Hope you're interested! Thanks!
Category: Other - Engineering &...       
Preferred Location: United States

D****oup
 [?]
Sign in to view client's details.
| D****oup
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 10, 2014  |  Closed  |   11 Proposals
I want seasoned power electronics engineer to help design the high-voltage portion of a module that we configure as a reverse-phase (trailing edge) or a forward-phase (leading edge) dimmer module rated for 20A at 120VAC, 60hz. This module must be highly reliable while applied to a variety of harsh lamp loads...from high inrush incandescent to line voltage LED lamps (have seen some cheap dimmable LED lamps generate a power factor near .1pf when dimmed!) It should also be tolerant of accidental shorting and open-circuits. It is our intention to include a 20A, 350uS rise-time inductor (choke) at the output of this module (in series to the load). For a brief overview of issues and lamp types, please study the content of this link...   [obscured]  /lamps/dimmers.html You will provide a rough schematic, BOM, and instructions for PCB layout...keeping in mind that this will eventually be submitted for UL508 testing. We need to be able to drive this dimmer module with our exi...
Category: Electrical       

****
 [?]
Sign in to view client's details.
| Client
|    United States
Fixed Price: Not Sure   |  Posted: Mar 05, 2014  |  Closed  |   8 Proposals
JOB SUMMARY This international automotive Tier 1 supplier has their Technical Center located in a small town of architectural richness near the southwest area of Michigan. JOB RESPONSIBILITIES ¿ You would be the Lead Product Engineer on new product development projects related to new fan and airflow ¿ You would be involved in the designing of mounting discs and fan blades to ensure specification and packaging requirements ¿ You would work within the concept evaluation and technical assessment of design revisions ¿ You would make recommendations specific designs and changes to meet the customer's technical requirements ¿ You would lead and/or support DFMEA and DVP&R generation with support of the engineering group QUALIFICATIONS ¿ Bachelor`s Degree in Engineering (Mechanical/Aerospace) ¿ Master`s Degree preferred in engineering with focus on FEA, CFD analysis or Dynamic Simulation. ¿ 4-8 years of experienc...
Category: Other - Engineering &...       
Skills: Manufacturing Design, Product Engineer       

t****rce
 [?]
Sign in to view client's details.
| t****rce
|    United States
Hourly Rate: Not Sure   |  Duration: 4-6 months  |  Posted: Feb 06, 2014  |  Closed  |   19 Proposals
Working remotely at the location of your choosing, consultant(s) will provide project engineering support to a commercial construction General Contractor on an as-needed basis. Consultant(s) engaged under this RFP will be called upon to: 1. Working from the Contract Documents and a CPM-method schedule generated by others, back-schedule procurement, submittal, and fabrication/delivery tasks in order to calculate lead times. 2. Working from the Contract Documents, generate a Submittal schedule based on calculated lead times. 3. Review required Submittals for quantity and conformance with the Contract Documents within 5 work days of receipt, and in no case later than as scheduled. Route required submittals for approval through Architect and Owner, and return to Subcontractors and Suppliers and release to fabrication/shipping in time to support the critical path. Maintain Submittal Log in MS Excel or in General Contractor's project management software. 4. Perform raw quantity take offs...
Category: Other - Engineering &...       

m****ine
 [?]
Sign in to view client's details.
| m****ine
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jan 22, 2014  |  Closed  |   7 Proposals
Hi, I have an un-amped analogue signal lead that I want to plug into a PCB to allow for a headphone jack, a volume control (for the headphones) and also hopefully, an analogue to digital processor; to allow for USB signal out. The signal comes from a series of magnets vibrating over copper coil type pick-ups (vibrating magnet over the top of wire coil is generating the signal). So, I require a small PCB designed and prototyped. The attached 'circuit draft' is just for reference but it is close to what we require. The signal processing must be assumed to be very high quality (so a premium would be paid for a high quality signal processor) as this is for a musical instrument.
Category: Electrical       

C****iCo
 [?]
Sign in to view client's details.
| C****iCo
|    Australia
Hourly Rate: $100 - $200 / hr   |  Duration: Not Sure  |  Posted: Dec 29, 2013  |  Closed  |   0 Proposals
* New products leading from design to production : - Architecture Spec Testability Review. - Participation in design verification stage of Chip Design. - Participation in Pattern Generation stage of Chip Design. - Test Patterns Conversion. - Test Program Development. - Pre-silicon Pattern Verification. - Silicon Debug. - Device AC/DC Spec Parameters Characterization. - Mix-Signal Testing - Production Support and Yield Enhancement.
Category: Product Design       

i****oev
 [?]
Sign in to view client's details.
| i****oev
|    Israel
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Dec 24, 2013  |  Closed  |   1 Proposal
Are you are looking for a career with a progressive, growing consulting firm in an entrepreneurial environment that fosters professional development and career advancement? Have held senior leadership roles in major corporations where process design and improvement is your passion? Do you thrive in a fast paced, results oriented environment; then The Alacer Group is the place for you. With a strategy focused on the next generation of process improvement, The Alacer Group is an innovative place to work, grow, and realize your full potential. The Alacer Group is seeking experienced Lean Master Black Belts and Lean Black Belts to join our team. Qualified candidates must have a minimum of 5 years' experience directly applying Lean and running Kaizen events. Ideal candidate will have worked in and applied process improvement techniques within the audit function of a large organization. This is a W2 consulting position only and includes a comprehensive benefits package. Weekly trave...
Category: Other - Engineering &...       
Skills: Six Sigma, Kaizen, Lean       
Preferred Location: United States

v****rma
 [?]
Sign in to view client's details.
| v****rma *
|    India
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job