Save this Search
     
Sort by:
  • Posted Date
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 20, 2015  |  Closed  |   40 Proposals
I am in the preliminary stages of building a house and would like to have someone help draft the design. Experience in energy efficient design is preferred. The specifics: - 1000 to 1200 square feet main level - Finished basement - Similar floorplan to the following link, but only 1 bathroom and no second story:   [obscured]  /pin/503629170805500780/ - 2 bedroom 1 bath on mainlevel, and same for basement - Make main level bathroom accessible to both the master bedroom and the living room. - Egress windows in basement (not a walkout) - View to focus facing east - Large outdoor porch area, partially covered - Energy efficient utilizing these concepts:   [obscured]  /articles/home-efficiency/basics/passive-solar-home-design - Bathtub in master bathroom with good view to the west. - Elderly friendly, using these concepts:   [obscured]  /generic.aspx?genericContentID=89934 - See samples of exterior finish and other elements here:   [obscured]  /tdp515...
Category: Architecture       

P****ial
 [?]
Sign in to view client's details.
| P****ial
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 07, 2015  |  Closed  |   38 Proposals
Hi There! I have taken over a housing division. This division has 13 home designs; 6 Bungalo and 7 Two Storey, but they are all traditional looking, with two car garages. I would like to modernize the outside of these offerings without getting into changing the entire floor plans etc.. The neighborhoods these houses are sold in sometimes have design restrictions that limit certain ideas, but I have seen other builders doing very interesting things within those guidelines, so I know there is a lot of room to improve. In fact, I want to be better than them. I think we would basically be working on materials and shapes to the front of the houses, and some landscaping. Your ability to render the existing designs in your program will be required. I need photo realistic presentations that can then be put on our website to attract future customers. Once this project starts I will send you the link to our website and the websites of our competitors, then we will select a model of ours and ...
Category: Architecture       

W****ure
 [?]
Sign in to view client's details.
| W****ure
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 01, 2015  |  Closed  |   35 Proposals
Hi, We are looking for a skilled professional to create 3D walkthroughs and renderings of some properties we have. Below I have attached a link to one building on one of the properties. Specifics: Create a walkthrough and photo-realistic renderings of the interior and exterior Keep the building looking realistic but cleaned up Keep to the building's actual structure. Make the space into your vision of an artist space (studios, lofts, galleries, entertainment center, etc.) Here is info on the space:   [obscured]  /15UGD2U Thanks, Josh
Category: 3D Modelling       

g****di1
 [?]
Sign in to view client's details.
| g****di1
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jan 22, 2015  |  Closed  |   4 Proposals
What I need here is a copper coil that generates a magnetic pulse of 40,000 Gauss. This circuit would consist of: 1) a copper coil 2) a quick charge capacitor 3) a battery charging the capacitor 4) a manual switch to trip the circuit and 5) the connecting wires. It is purely electric, no electronics are involved. For your better understanding. This would consist of: 1) a copper coil, which looks like this:   [obscured]  /photo/pl9815-single_phase_electromagnet_solenoid_air_core_coils_for_capacitor_resistor.jp g (link may not work, kindly google as "single_phase_electromagnet_solenoid_air_core_coils_for_capacitor_resistor") 2) a heavy duty quick discharge capacitor, which looks something like this:   [obscured]  /photo/v1/60077679139_1/Standard_Fan_Ceiling_Fan_fast_charge_and.jpg_140x140.jpg 3) A mini circuit with a battery and a switch which allows me to charge the capacitor and discharge it through the coil in order to produce a strong but sho...
Category: Electrical       

g****123
 [?]
Sign in to view client's details.
| g****123
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Jan 22, 2015  |  Closed  |   2 Proposals
I need a prototype for a gps tracker I have the gps already now what I need from someone to build a working prototype gps that can link to any device that have gps build in already.. the gps is already connected to 66 channels from the space satellite so I just need to connect a working signal from my gps device to any phone gps signal.
Category: Product Design       

t****tis
 [?]
Sign in to view client's details.
| t****tis
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jan 10, 2015  |  Closed  |   10 Proposals
I am leading the development of a luxury resort in Lombok, Indonesia. We have concept designs for 3 x villas. Our aim is to source materials, prefabricate and ship to site for installation at a remote location. The villas will be built in a tropical minimalist style incorporating the following elements: - Light Steel Frame Villa (on concrete piling foundations) - Glass curtain walls and sliding doors for frontage - Palmeco building board (a proprietary form of fibre board) for roof, floor decking and side/rear walls. - Rockwool insulation Each villa will have a terrace area set on concrete slab and a pool set in concrete. We are looking for an estimator to produce the following: i) Bill of Materials (including quantities and specifications) ii) Calculation on labour time iii) Preferred (but not essential) for cost estimates of materials and labour in Indonesian market. iv) Advice on design, materials and construction programme related to BM. Requirements include: - Previous exp...
Category: Other - Engineering &...       
Preferred Location: Western Europe, Eastern Europe, India/Southern Asia, Eastern Asia, Middle East & Central Asia, Africa

C****bok
 [?]
Sign in to view client's details.
| C****bok
|    Indonesia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jan 01, 2015  |  Closed  |   4 Proposals
Seeking a certified mechanical engineer for periodic reviews of small-scale low pressure systems (0-60psi). Services will include initial system review & consultation, system schematic, and a stamped and certified letter stating that system is commercially constructed and meets codes of recognized and generally accepted good engineering practices. Due to the nature of our industry, every system is unique and must be independently evaluated by a mechanical engineer. Previous builds have been certified to comply with codes of recognized and generally accepted good engineering practices and future builds will vary only slightly. We believe that once you are familiar with the application and components of construction that you too will be confident in issuing the letter. We also welcome your feedback and suggestions. Please provide a bid for a review of five of our systems and issuance of the stamped and certified letter for each. If you would like a preliminary review of the ...
Category: Mechanical       
Preferred Location: United States

****
 [?]
Sign in to view client's details.
| Client
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Dec 18, 2014  |  Closed  |   1 Proposal
I bought the stylophone and the MIDI conversion kit and I need someone to put it all together. here is a link to the instructions to do the build.   [obscured]  /hotchk155/MIDI-Stylo/wiki/Build-Steps. Heres a link to the kit i bought   [obscured]  /products/hotchk155/midi-stylophone-conversion-kit/
Category: Electrical       

A****rty
 [?]
Sign in to view client's details.
| A****rty
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Dec 16, 2014  |  Closed  |   0 Proposals
? Commercial and Residential Building ? Architectural / Interior Design ? Architectural / Conceptual Presentation ? Graphic Presentations and Layouts ? Project Management With years of experiences in architecting/designing along with extensive technical skills, I will be a great fit for fast track projects. Please feel free to visit this link for one of my current portfolios:   [obscured]  /designer/united-states-texas-houston-dhha-architecture
Category: Interior Design       

H****ong
 [?]
Sign in to view client's details.
| H****ong
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Dec 05, 2014  |  Closed  |   8 Proposals
I am looking for a design and calculations for an equipment shed. Attached is a photograph of the type of structure I have in mind. I have also attached a soil report. Basically it is a pole barn/post and beam type design with three bays. Details as follows: Building size 36 ft wide by 24 ft deep Roof overhang to be 2 ft on all sides Roof pitch 5:12 Open gables Height to first header 10ft. Rafters on 3-4ft centers (no trusses) Roof decking 2x6 t&g pine Clay tile for roof at 10 lbs/ft2 Knee braces or Simpson components Shear wall to 6 ft high wall on three sides (open to the front and above to headers) Gravel floor Other notes: A conventional foundation is OK Center posts between bays are acceptable, however if you can design them out at a lower cost feel free. I would like to use 6"-7" diameter logs for the rafters. see link for information   [obscured]  /prices.htm
Category: Civil & Structural       

f****hen
 [?]
Sign in to view client's details.
| f****hen
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: Dec 04, 2014  |  Closed  |   0 Proposals
Need an arduino program written to work with the listed hardware. There will be multiple displays with user inputs via the touch screen. SainSmart C97 Kit with MEGA2560 R3 Black + 3.2" TFT + TFT Shield + USB Cable for Arduino UNO MEGA R3 Mega2560  LINK TO HARDWARE?   [obscured]  /gp/product/B00CRE98EQ/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1 Arduino Nano You must have this hardware and be able to test the code with it. NOTE: This project will be very heavily using a LCD touch screen see link. I need someone who has successfully worked with this type of LCD touchscreen before. Please send examples of your work showing what type of graphical work, with menus and touch screen buttons you have done before. You must have this hardware and be able to debug the code on your side. I do not want you to provide hardware to me I will build on my side; You just need top have the same on your side for debug. Hardware this project will use is listed in the job description....
Category: Electrical       

e****bot
 [?]
Sign in to view client's details.
| e****bot
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: Dec 04, 2014  |  Closed  |   2 Proposals
Need an arduino program written to work with the listed hardware. There will be multiple displays with user inputs via the touch screen. SainSmart C97 Kit with MEGA2560 R3 Black + 3.2" TFT + TFT Shield + USB Cable for Arduino UNO MEGA R3 Mega2560  LINK TO HARDWARE?   [obscured]  /gp/product/B00CRE98EQ/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1 Arduino Nano You must have this hardware and be able to test the code with it. NOTE: This project will be very heavily using a LCD touch screen see link. I need someone who has successfully worked with this type of LCD touchscreen before. Please send examples of your work showing what type of graphical work, with menus and touch screen buttons you have done before. You must have this hardware and be able to debug the code on your side. I do not want you to provide hardware to me I will build on my side; You just need top have the same on your side for debug. Hardware this project will use is listed in the job descripti...
Category: Electrical       

e****bot
 [?]
Sign in to view client's details.
| e****bot
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Dec 04, 2014  |  Closed  |   26 Proposals
The basement is currently unfinished, has 9 ft ceilings, and a good amount of natural light due to 3 full size windows, and 2 walk out exits, one of which is double glass doors. I would like to maximize the space incorporating a large rec room, bedroom, gym, laundry closet, and a full bathroom. Couple design thoughts, I would like to keep the laundry close to it's current location, moving them together or to one wall or another is fine but not moving across the basement, will be too expensive for plumbing. I would like the full bathroom to be near the other plumbing access, again to avoid unnecessary plumbing costs of digging up the floor and moving the pipes. I do not want a wet bar or kitchen area. I would prefer that the single exterior door opens to a breezeway or mudroom area, my in-laws will be guests in the basement bedroom frequently and they will walk their dog out that door, I need a space for a bench, coat hanger, shelves, etc. At this point I am looking for floor p...
Category: Architecture       
Skills: Architecture, Interior Design       

k****600
 [?]
Sign in to view client's details.
| k****600
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Nov 25, 2014  |  Closed  |   24 Proposals
Build a Revit Model from the CAD files that are attached. I'm using Revit 2015. I would like the model to be fairly detailed. No renderings needed at this time. Site features also to be added as part of the model. Ground is flat. Here is a link to the photos of the house for your reference:   [obscured]  /sh/fj79h65cym84vc9/AADRotVqzMndtyRt4o5iMb1ga?dl=0
Category: 3D Modelling       
Skills: AutoCAD, AutoDesk Revit       

M****LLC
 [?]
Sign in to view client's details.
| M****LLC
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Nov 20, 2014  |  Closed  |   4 Proposals
Hi I would like to build a 12 letters split-flap display similar to the one described on the link below.   [obscured]  /flip-flap/ * The modules should display alphanumeric characters. A-Z, #, @ , -, _ and a space at a minimum. * I could be able to adjust program at least 4 different texts to be displayed, the time each text is displayed and the time and speed of spinning in between each text. * The display should be easy to mount on a wall. some other examples of split-flap display can be found below:   [obscured]  /blog2/?p=111 Contact me if you need any information. Thank you
Category: Mechanical       
Skills: Arduino       

s****aki
 [?]
Sign in to view client's details.
| s****aki
|    United States
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: Nov 16, 2014  |  Closed  |   4 Proposals
I'm looking for to order 2,000 units with a similar size, shape, appearance and weight as the following link.   [obscured]  /Despicable-Me-Build-A-Minion-Deluxe-Action/dp/B00BSWS25Y
Category: Product Design       
Skills: .NET Framework       

t****110
 [?]
Sign in to view client's details.
| t****110
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Oct 14, 2014  |  Closed  |   7 Proposals
The Job: Ruby on Rails Developer We are an exciting startup based in Toronto, ON building an HR web-app that tracks and manages employee projects on a social media platform. The front-end portion of the app has already been completed. We are looking for a strong Ruby on Rails developer that will own the back-end implementation of the web-app on a SAAS multi-tenant architecture. You will be responsible for building reliable, scalable, and secure code. Although not responsible for front-end development, you may be expected to assist in developing and/or updating HTML, CSS, J-Query code. We are looking for someone who believes that benchmarking and tuning performance is fun and an essential part of a development cycle. Requirements o Solid experience with Ruby and Ruby on Rails, SQL o Experience with Heroku/AWS (Amazon) hosting & web-services o Familiarity with Twitter Bootstrap o Must be familiar with Agile project management methodology o Good knowledge and habits with vers...
Category: Product Design       
Skills: CSS, HTML, Ruby on Rails, Amazon Web Services, Heroku       

S****mpl
 [?]
Sign in to view client's details.
| S****mpl
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Oct 14, 2014  |  Closed  |   13 Proposals
I am creating a 3D "Build Your Barn" web application and need to create realistic 3D models of the storage barns. Here is a link to view the models   [obscured]  /products/treated-buildings/ I need a quote and I need to know what to provide you with.
Category: 3D Modelling       
Skills: 3D, 3D Modeling, 3d Animation, 3D Design, 3D Rendering       

A****ifi
 [?]
Sign in to view client's details.
| A****ifi
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Oct 11, 2014  |  Closed  |   15 Proposals
Hi. I have a pretty simple job for anyone who is familiar with interior and lighting design. I have a building where the top (3rd) floor and the 2nd floor are both residential (about 1500 sq ft each floor). Each floor is it's own unit (I have a floor plan to share). Right now it's gutted to the studs and my contractor is really on me for the lighting layout. My local designer has pretty much flaked out on me so I am on my own with this. I have not designed a place before so I need a little help. This is not a major structural renovation. I do not need specific or exact plans. I really just need a diagram of where I want the lights to go and what general type of lights I would like there. This is pretty basic stuff. I just don't want to tell him what I want and later realize that I overlooked some important placement because I have not done this before. I need some help but it should be a quick job for someone. My contractor is already on me to have this done a few days ago...
Category: Interior Design       

b****out
 [?]
Sign in to view client's details.
| b****out
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Sep 23, 2014  |  Closed  |   5 Proposals
This project will involve technical drawings, as follows: - producing two options for the addition design, along with a simple site plan, as described below by Sep 27. - pass the options back to me, I will consult the client and work with engineer. - you will revise and complete the chosen design per engineer's specs by Oct 6. - you should be familiar with Western Canadian stick-framing methods. - you should be familiar with engineering standards. Here are a couple snippets from our email exchange, for your info: "I have an existing deck which is about 6 feet above ground attached to the front of my house (20x10) - i am planning to convert it into a covered living space (walls/roof) - i am looking for someone who can provide me with an enginner's drawing/ stamp for the roof and flooring." "the permit office requires a design that will include materials to be used, and details for flooring, piles and roofing." "Requirements: 1. 20x10 closed living space...
Category: Architecture       
Skills: Architecture, AutoCAD, Engineering drawing       

R****ses
 [?]
Sign in to view client's details.
| R****ses
|    Canada
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: Sep 16, 2014  |  Closed  |   0 Proposals
hi, 1/ purpose: assist me in the configuration of my home audio installation loudspeakers using: spectrum analyzer on computer (not acquired yet, feel free to suggest from Part Express.com for example) + Hypex AS2.100 DSP amplifier 2/ Your job: learn how to plug wires to the Hypex AS2.100 + learn how to use the free software to build the active filter. (hypex.nl downloads for files and soft) 3/ How: TeamViewer9 installation required. it's a free remote access software enabling you to keep control of my computer. only disagreement downloading this software is that it will install 3 software you can easily uninstall via add / remove software from your windows OS 5/ steps:"launch teamviewer9 you to keep control of MY computer"(very easy) a/ plugging the wires of the speakers (left) in the amplifier. it's a 2 way system with a horn and a driver for medium/tremble (jbl 2426H) + a bass box (Onken) b/ switching on the amplifier and configure it to prevent any damage to the speak...
Category: Other - Engineering &...       

g****104
 [?]
Sign in to view client's details.
| g****104
|    Belgium
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: Sep 14, 2014  |  Closed  |   8 Proposals
hi, 1/ purpose: assist me in the configuration of my home audio installation loudspeakers using: spectrum analyzer on computer (not acquired yet, feel free to suggest from Part Express.com for example) + Hypex AS2.100 DSP amplifier 2/ Your job: learn how to plug wires to the Hypex AS2.100 + learn how to use the free software to build the active filter. (hypex.nl downloads for files and soft) 3/ How: TeamViewer9 installation required. it's a free remote access software enabling you to keep control of my computer. only disagreement downloading this software is that it will install 3 software you can easily uninstall via add / remove software from your windows OS 5/ steps:"launch teamviewer9 you to keep control of MY computer"(very easy) a/ plugging the wires of the speakers (left) in the amplifier. it's a 2 way system with a horn and a driver for medium/tremble (jbl 2426H) + a bass box (Onken) b/ switching on the amplifier and configure it to prevent any damage to the speak...
Category: Other - Engineering &...       

g****104
 [?]
Sign in to view client's details.
| g****104
|    Belgium
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Sep 04, 2014  |  Closed  |   5 Proposals
Similar hinges that I need custom built for my prototype:   [obscured]  -scharniere.de/en/info/products/product-animations.html   [obscured]  /media/ If you feel you are capable of building motorized hinges such as the links above, please send me your contact info. I am looking for a Mechanical Engineer guru that can practically build anything. Take it from concept to prototype. Build custom multi-joint hinges all motorized. I am looking to work with someone who is local located around the LA, OC, Riverside or SD area. If you live outside these areas please do not apply since I wish to meet in person and check-in on the build. Thanks
Category: Product Design       
Preferred Location: United States

t****s44
 [?]
Sign in to view client's details.
| t****s44
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job