Save this Search
     
Sort by:
  • Posted Date
Engineering & Manufacturing
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: 3h, 50m ago  |  Ends: 14d, 20h  |   5 Proposals
Architectural and structural design. Including, also, electrical, thermal and sanitation drawing. Site and road presentation. List of quantities, also. Project management!
Category: Civil & Structural       
Skills: Architecture, AutoCAD, Civil Engineering       

b****luc
 [?]
Sign in to view client's details.
| b****luc
|    Romania
Fixed Price: Not Sure   |  Posted: 7h, 10m ago  |  Ends: 29d, 16h  |   0 Proposals
- Male / Female - 18 to 50 years of age - Bachelor's Degree graduate - with at 5 years managerial experience in manufacturing - with good leadership and management skills - must knowledgeable in electronic products, machines and methods - must willing to work in Calamba / Biņan, Laguna - must be proficient in Microsoft Office
Category: Other - Engineering &...       
Skills: Manufacturing Managerial Skills       
Preferred Location: Philippines

c****wer
 [?]
Sign in to view client's details.
| c****wer *
|    Japan
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 11h, 53m ago  |  Ends: 14d, 12h  |   0 Proposals
You need to design a 2KW PM reluctance motor. I will send the full specifications as we proceed. I prefer you use JMAG for the design. Ansoft Maxwell is ok though. After the design is approved you need to source the material and assemble that stator and the rotor of the motor. The bearing and the balancing are not important. I can manage that at my side. I will provide more motor specifications as we proceed. Regards
Category: Electrical       

G****te2
 [?]
Sign in to view client's details.
| G****te2
|    Australia
Hourly Rate: Not Sure   |  Duration: 4-6 months  |  Posted: 15h, 31m ago  |  Ends: 14d, 8h  |   5 Proposals
We are working on a project to develop a surface-following, solar-powered ocean instrument that measures motions and transmits the data real-time. The project will encompass the electronics and software design for the power management module, motherboard, sensor package, and communication module. We are looking for an embedded systems engineer or electrical engineer who can work with our team to design and build custom PCBs to integrate the system modules, develop software to support the hardware, and test the system for functionality. We are a small startup located in the San Francisco Bay Area (Half Moon Bay), and we would prefer to work with a local contractor to allow for regular meetings.
Category: Electrical       
Preferred Location: United States

s****ift
 [?]
Sign in to view client's details.
| s****ift
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: May 26, 2015  |  Ends: 5d, 15h  |   20 Proposals
Needed: CAD drafter (AutoCAD Architecture 2004 or newer) for a residential remodel of a two-story home (approximately 1,550-square feet) with detached two-car garage. Drafting ONLY ? no design work. Candidate will have complete supervision of the project architect and project manager. Candidate will be sent drawings, sketches, and/or redlines to translate into AutoCAD dwg files at 1:1 scale, US standard units (inches and feet). Drawings will include at a minimum plans (floor, roof, and foundation), interior and exterior elevations, sections, details, and notes. The existing floor plan has already been drawn in CAD. Template files with layers, text styles, dimension styles, and plot styles will be provided. Requirements: Candidate is expected to follow directions and must communicate frequently with the project team in email form, including dwg or other file attachments. Understanding of English is necessary. Understanding of American drafting conventions and basic structure...
Category: CAD       
Skills: Architecture, AutoCAD       

t****tti
 [?]
Sign in to view client's details.
| t****tti
|    United States
Fixed Price: $5,000 - $10,000   |  Posted: May 26, 2015  |  Ends: 39d, 10h  |   6 Proposals
A growing company in the Energy Services arena is looking for an Electrical Engineer to manage the design and development of Dynamic Power Factor Optimization devices for industrial and commercial facilities. Dynamic devices will switch capacitor banks on demand depending on the value of the power factor. Devices will have wireless communication capabilities to transmit data from the device to local or remote servers. Engineer will also be responsible for conducting on site studies to evaluate the energy savings opportunities and sizing of capacitor banks at each facility in order to optimize power factor and maximize energy savings. Other responsibilities include creating training and support programs for the company's resellers to perform facility energy audits and manage their own installations. Qualifications required: B.S. in Electrical engineering, P.E. Electrical Engineer, 10 years of experience in power factor correction optimization/Power Electronics
Category: Electrical       

r****oya
 [?]
Sign in to view client's details.
| r****oya
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 26, 2015  |  Ends: 13d, 5h  |   0 Proposals
Your access to the world's leading site for online work is only moments away. Every day thousands of smart businesses hire and manage on Elance.
Category: Interior Design       
Skills: 3D Systems       

k****k08
 [?]
Sign in to view client's details.
| k****k08
|    Ukraine
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 26, 2015  |  Ends: 12d, 21h  |   11 Proposals
We have hundreds of industrial machines for manufacturing processes. Most of these machines have simple control panels and are not connected to the corporate network in any way. We would like to connect some of these machines to the corporate network and log the status of the machines to a central database. This way we can perform analysis on the machines. The first machine that we would like to attempt this for is a knitting machine. After opening the front panel of the machine, we see Molex styled connectors used to connect the front panel to the main logic boards of the machine. We have also found documentation that clearly describes the pin outs. We would like to tap into these connections and connect them to a Particle (  [obscured]  /prototype) Core or Photon. These prototyping boards are Arduino-like, but also come with a strong management platform. Much of the information that we want to capture is simple on/off status information. For example, is the door of the mac...
Category: Electrical       

h****ang
 [?]
Sign in to view client's details.
| h****ang
|    Hong Kong SAR, PRC
Fixed Price: More than $10,000   |  Posted: May 24, 2015  |  Ends: 22d, 1h  |   3 Proposals
Field Service / Applications Engineer Company Work Location: Waukesha, WI Salary: $60,000 - $80,000 Job Description: Experienced Field Service / Applications Engineer is required having responsibility to Supports Sales by evaluating the Technical/Commercial feasibility of a tender and help to clarify customer inquiries and specifications. Requirements: ? Experience with Mitsubishi, Fanuc, and Siemens controls is critical. ? Min. 2-3 years working experience with Turbo-expanders and/or Compressors. ? 5 to 10 years of experience in design engineering, applications engineering, high technology sales support, or field service. ? Requires knowledge of API, ASME, NEC (or IEC) codes. ? Experience integrating automation and motion control components such as motors, feedback devices and servo drives and controllers ? Process design knowledge, experience reading and interpreting technical specifications, and familiarity with technical drawing sets. ? Ideally someone with experience in...
Category: Electrical       

P****era
 [?]
Sign in to view client's details.
| P****era
|    India
Fixed Price: Not Sure   |  Posted: May 23, 2015  |  Ends: 10d, 3h  |   6 Proposals
Hi, I am looking for someone to build us a prototype laser microphone. This is a tool for surveillance to listen to people behind glass, we want to make a really long range one which would work at more than 500m, the more distance the better. Here is some inspiration:   [obscured]  /5961503/build-a-laser-microphone-to-eavesdrop-on-conversations-across-the-street   [obscured]  -laser.com/html/laser_voice_transmitter.html   [obscured]  /hack/how-to-long-range-laser-microphone-spying/ I want the system to use a non-visible laser, and to be small, with good battery life, at least 6 hours. I want to include digital noise reduction and the ability to record. This project is to create a working prototype, so you should be experienced in audio electronics, we will supply you any parts you want - you just need to build us a good products and provide instruction on how to build. If it works out well, we would like to offer you a further contract to manage the final production ...
Category: Electrical       

d****r3d
 [?]
Sign in to view client's details.
| d****r3d
|    United Arab Emirates
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: May 23, 2015  |  Ends: 10d, 1h  |   9 Proposals
Project Management Multi-disciplinary, including the fields of mechanics, hydraulics, electronics and Fniaomatikh. ? exploring problems, and providing engineering solution. Accompanying the design up to the implementation and customer satisfaction. ? Preparation of models for analysis, and analysis during the planning application. Management and setting hydraulic experiments, according to national or international standards which include the measurement accuracy of the product, half explosion, testing life cycles, and so on. ? Work with suppliers and guidance at all stages of production. ? Preparation and presentation of design reviews. ? Performing strength calculations Solidworks Simulation software and analyzing failures. ? Engineering design of products for measuring water and accessories broadcast information includes: design of buildings, packaging, plastic injection design, casting design brass machining and preparation of manufacturing drawings. ? Manage project teams include: ...
Category: CAD       

T****gin
 [?]
Sign in to view client's details.
| T****gin
|    Israel
Hourly Rate: Not Sure   |  Duration: 4-6 months  |  Posted: May 22, 2015  |  Ends: 24d, 13h  |   3 Proposals
The Project Engineer manages critical external resources and owns the execution of contract design efforts. Location: New Jersey Responsibilities: Direct and supervise design consultants and contract design partners. Own the product development for contract design engineering activities and ensure that products meet market window timelines and required specifications (On-Time; On-Spec; On-Budget) Manage multiple concurrent engineering projects to meet schedule and budget targets Oversee the engineering designs and testing to ensure conformance to product specifications Ensure adherence to ISO standards during the design and development process Present engineering plans and status updates to project stakeholders Direct engineering support of sales and manufacturing operations comprising applications development, product installation, troubleshooting, and 8D analysis Ensure adherence to contract engineering department budgets Demonstrate effective leadership skills in inspiring, drivin...
Category: Product Design       
Preferred Location: United States

a****ali
 [?]
Sign in to view client's details.
| a****ali
|    United States
Fixed Price: $500 - $1,000   |  Posted: May 22, 2015  |  Ends: 9d, 10h  |   10 Proposals
We need help designing a very simple circuit, that will fit our specifications. We are trying to use the attached LED, with the attached LED driver (or an equivalent), but we don't know how to design an appropriate circuit for our specs. We want the LED to run at 18.2V and 1.2Amps. We don't need anything fancy, no PWM functionality. We just need to turn the LED on and off very quickly via a +/- 5V signal. Please see the "Shopping List" below for further requirements and specs. SHOPPING LIST: Input Power 24v dc-27v dc Battery 150AH Led Requirements 1. Build a linear array of 120 light that will be powered using a 24vdc 150 amp battery. 2. The lights will be mounted on a heat sink that will cool the lights to temperatures well below the required operating temperatures. 3. Regulate input to each led to 18.3v dc and limit amperage to 1.2 amps 4. Ability to turn light on and off 10,000 times per second for 14 micro seconds. 5. Each LED will have a dedicated driver to prevent t...
Category: Electrical       

4****ech
 [?]
Sign in to view client's details.
| 4****ech
|    Canada
Hourly Rate: $10 - $15 / hr   |  Duration: 4-6 months  |  Posted: May 22, 2015  |  Ends: 9d, 6h  |   1 Proposal
Hi, We're a UK based footwear manufacturer and retailer. We're looking for someone to search and source manufacturers in Europe for a number of private label products. Tasks will include - thorough online research to find product suppliers - contacting and liaising with manufacturers - making sourcing decisions - negotiating costs and production schedules Opportunity for additional design related responsibility and input into brand product design and selection. Preferred attributes of candidates - - Experience and understanding of the buying and sourcing process - Candidates based in Europe as the majority of our suppliers are Europe based - Candidates based in Portugal/Spain or UK is preferable - Knowledge of Portugal/Spain manufacturing regions - Multilingual - Portugese/Spanish ideally - Can Google
Category: Product Design       

h****orc
 [?]
Sign in to view client's details.
| h****orc
|    United Kingdom
Hourly Rate: $10 - $15 / hr   |  Duration: 4-6 months  |  Posted: May 22, 2015  |  Ends: 9d, 6h  |   1 Proposal
Hi, We're a UK based footwear manufacturer and retailer. We're looking for someone to search and source manufacturers in Europe for a number of private label products. Tasks will include - thorough online research to find product suppliers - contacting and liaising with manufacturers - making sourcing decisions - negotiating costs and production schedules Opportunity for additional design related responsibility and input into brand product design and selection. Preferred attributes of candidates - - Experience and understanding of the buying and sourcing process - Candidates based in Europe as the majority of our suppliers are Europe based - Candidates based in Portugal/Spain or UK is preferable - Knowledge of Portugal/Spain manufacturing regions - Multilingual - Portugese/Spanish ideally - Can Google
Category: Contract Manufacturing       

h****orc
 [?]
Sign in to view client's details.
| h****orc
|    United Kingdom
Fixed Price: Not Sure   |  Posted: May 21, 2015  |  Ends: 8d, 12h  |   9 Proposals
Are you a skilled industrial engineer with some background in electrical engineering and experience with consumer electronics? Do you want to join a young, innovative team at the forefront of a brand new market that will change 'personalized proximity marketing' forever? If so, this is an amazing opportunity for you! Job Responsibilities ? Play a crucial role in the development of one of our new, groundbreaking products ? Design, develop, implement and then further improve manufacturing processes to produce a cost effective model of the product ? Work with and resolve issues with manufacturing Requirements ? Bachelor's degree or equivalent in industrial engineering or related discipline ? Strong project and time management skills ? Experience in work flow optimization, work measurement and efficiencies
Category: Other - Engineering &...       

s****nes
 [?]
Sign in to view client's details.
| s****nes
|    United States
Hourly Rate: More than $50 / hr   |  Duration: Not Sure  |  Posted: May 21, 2015  |  Ends: 8d, 6h  |   2 Proposals
The comany has an exciting opportunity for a Manufacturing Execution Systems (MES) Project Lead located in Freeport, TX (preferably) or in Midland, MI. ? The Manufacturing Execution Systems (MES) Project Lead will work as part of a globally-distributed team of Process Automation professionals and will have responsibility for leading and managing the migration of legacy VAX based process information systems to execute on an Aspen MES system platform. ? VAX experience helpful; not required. ? Travel: 5- 10% travel is likely.
Category: Chemical Engineering       
Preferred Location: United States

S****ers
 [?]
Sign in to view client's details.
| S****ers
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 20, 2015  |  Ends: 22d, 12h  |   1 Proposal
Robert Half Technology is currently seeking skilled Software Engineer for a contract to full time opportunity with our client in El Segundo, CA. Software Engineer s responsibilities include the ability to: -Learn, analyze and assess current platform, database and code -Clean, edit and restructure companies database as needed -Proactively investigate, diagnose and solve website and program bugs and issues -Work with the sales, customer service and production teams to troubleshoot and fix website and program errors as they arise -Troubleshoot auction program errors as they arise during all live auctions -Work with the sales and operations team to assess and restructure current user processes -Write code to implement new website pages, features and user functionalities -Update website with new copy, text and design as needed -Manage and lead a team of three (3) skilled off-short developers; delegate projects as necessary; provide detailed reports on programming updates and changes Sof...
Category: Product Design       

R****man
 [?]
Sign in to view client's details.
| R****man
|    United States
Fixed Price: $500 - $1,000   |  Posted: May 20, 2015  |  Ends: 6d, 21h  |   8 Proposals
Hi We are looking for a Revit BIM modelere having good exposure in Revit Architecture, Structure or Revit MEP for our trivandrum office.
Category: Civil & Structural       

g****mar
 [?]
Sign in to view client's details.
| g****mar
|    India
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: May 19, 2015  |  Ends: 6d, 10h  |   0 Proposals
site management & organisation is key , managing site staff , dealing with clients ,recorded daily diary , ovesaing site logistics ,always thinking ahead and planning to be very motivational and give good feedback when needed to right people,to record risk assessments , and enforce the company policy's for staff to wear boots ppe ect, to be wiling to go on courses to enable the health & safety skill to advance to use your insensitive to work in a team and send emails and record charts on progress on sites , a driving licence is essential , at-least 5 years experience to be working in a active company round london we are based in croydon
Category: Contract Manufacturing       

e****y77
 [?]
Sign in to view client's details.
| e****y77
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 19, 2015  |  Ends: 21d, 3h  |   0 Proposals
All aspects of product design and development, supporting electrical and electronic subsystems of automotive lamps. From customer concept thru final requirements, review with customer and communication/coordination with CLIENT. Conduct feasibility reviews and communicate with Customer and CLIENT all development engineering issues. Control and support engineering data/documents delivery between customer and CLIENT. Support identification and resolution of Quality issues on Head/Tail Lamp between customer and CLIENT. Support customer development stage events based on product development timing such as Lit Mockup and Plywood Mockup sample build, DV/PV Test, EMC Test between Customer and CLIENT. Play an interactive role as a Liaison Engineer between Customer and CLIENT. Work onsite at MNA but also frequently offsite at customer facilities. Perform benchmarking and technology trend survey on Automotive Lighting system for North American market. Must have requirements Engineering Degree. Me...
Category: Electrical       

G****ATR
 [?]
Sign in to view client's details.
| G****ATR
Fixed Price: $1,000 - $5,000   |  Posted: May 18, 2015  |  Ends: 5d, 15h  |   2 Proposals
Mido Dairy is a dairy production company based in Kabul. Mido Dairy has brought all its techonology from The Netherlands and seeks an experienced dairy professional to take the position of Production Manager and train the personnel.
Category: Contract Manufacturing       

m****iry
 [?]
Sign in to view client's details.
| m****iry
|    Netherlands
Fixed Price: More than $10,000   |  Posted: May 15, 2015  |  Ends: 2d, 4h  |   3 Proposals
Hi, I'm looking for people who have the expertise to build a modern automated retail machine. Examples are :   [obscured]  /watch?v=vifBngmO5Ro#t=11   [obscured]  /watch?v=jo4g3cONJYU   [obscured]  /watch?v=23WsWelx4o8   [obscured]  /watch?v=LUaojH6Fk1Y   [obscured]  /watch?v=t_vUqHPsZoA   [obscured]  /watch?v=fm_u2LuYCrw A set of relevant skills would be : Industrial Design Embedded Systems Manufacturing Design Microcontroller Programming Robotics Payment Systems Material Science and Engineering A small incomplete list of the attributes of such a machine : Accept payment in notes and coins with a high level of reliability. High reliability, minimum downtime, enterprise grade software and easy maintenance Can be easily configured to handle a range of product sizes and shapes which may change from time to time Can dispense delicate items (for example, a tray of eggs) Capacitive (not resistive) touch screen. 20 inch display or bi...
Category: Other - Engineering &...       

k****lee
 [?]
Sign in to view client's details.
| k****lee
|    Singapore
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job