Save this Search
     

All JobsManufacturing Design

 (259 results)  
Sort by:
  • Posted Date
Results for 'Manufacturing Design'
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: 3h, 41m ago  |  Ends: 14d, 20h  |   9 Proposals
Need an experienced AutoCad Designer that can create CAD files to be output on a 3D printer. Will work with existing CAD file of item that will be packaged. Will need CAD file and engineered drawing.
Category: CAD       
Skills: AutoCAD, AutoCAD 2012, 3D Printing       

G****g62
 [?]
Sign in to view client's details.
| G****g62
|    United States
Fixed Price: Less than $500   |  Posted: 3h, 46m ago  |  Ends: 14d, 20h  |   8 Proposals
Hello, We have a client that is looking for us to design a kitchen and we are looking at someone to give us a concept rendering. We can send you some design ideas we are looking for as well as pictures of the space with dimentions etc. We would need this done within a week for our client presentation.
Category: Interior Design       

M****oup
 [?]
Sign in to view client's details.
| M****oup
|    Canada
Fixed Price: $1,000 - $5,000   |  Posted: 4h, 8m ago  |  Ends: 14d, 19h  |   6 Proposals
Looking for help re-designing an end cap for our hollow foam roller Problem we are trying to solve: Our attachment point is noisy and awkward when the strap is connected to the cap. The cap requires too many rotations to secure in roller. Primary goal is to attach a carry strap in the most simple way possible and have the carrying strap function as a stretching strap once removed. Please see attached reference material of our current design. - Does not need to be air tight, but enclosed enough to carry: car keys, gym towel, cell phone, our mobility balls, etc. - Must be able to attach a yoga style "stretching strap" directly to the cap (easily, with no noisy hardware ) - As simple a possible. Strap will function as a carrying strap. - Must thread with 2 full twists max ( no more than 3-4 half turns) - Strap cannot tangle while threading or removing the cap
Category: Mechanical       

R****ape
 [?]
Sign in to view client's details.
| R****ape
|    United States
Fixed Price: Less than $500   |  Posted: 5h, 50m ago  |  Ends: 14d, 18h  |   11 Proposals
Experienced Toy Designer/3D Modeler needed to convert 2D image into a Designer Vinyl Toy. This 5 - 6" toy will be the template that many character designs will be applied to. Candidates must have previous toy design experience. Advanced 3D modeling skills Project Steps: - Provider signs an NDA - Provider briefed on design requirements - Review 2D design - Convert & improve 2D design to 3D model - Deliver Rapid Prototype ready STL 3D files - Deliver turn around view (front, sides, back, top, bottom) of toy as artist template Please feel free to ask any questions.
Category: 3D Modelling       

P****ide
 [?]
Sign in to view client's details.
| P****ide
|    United States
Fixed Price: Not Sure   |  Posted: 7h, 56m ago  |  Ends: 14d, 16h  |   2 Proposals
we want to bulid a matlab program that connect CC2540 device and read sensor data from it using Bluetooth then do actions deped on the data that sended by the device
Category: Other - Engineering &...       

a****992
 [?]
Sign in to view client's details.
| a****992
|    Jordan
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 8h, 0m ago  |  Ends: 14d, 15h  |   12 Proposals
Hi, I have at a fair a device that is able to talk to centralised Heat&AC systems (like the ones that you find in hotels) and to control remotely temperature etc.. The device is marketed as a power saver due to the fact that uses ultrasonic sensors to detect the presence of people in the room and shuts down heat/AC or reduces it based on the setting chosen. The device is powered and uses power line network and a proprietary protocol to record power saving (the delta between the power reduced since the absence and what it would have used in power if the device was never in place). I would like to produce this device, right now this little device (15cmx10cm) can not be bough, so I would like to create one to propose to hotels etc... Would you be able to help? How would that work? I am a software person and never tried HW/Electronics before, so I am sorry if this might sound a bit foolish, but I can assure the project is serious and I have intention to find the right partner ...
Category: Electrical       

G****Dub
 [?]
Sign in to view client's details.
| G****Dub
|    United Kingdom
Fixed Price: Less than $500   |  Posted: 10h, 43m ago  |  Ends: 14d, 13h  |   3 Proposals
answer any two questions in options in attachment,5000 words, 2500 for each question with deadline 20th september
Category: Other - Engineering &...       

b****er9
 [?]
Sign in to view client's details.
| b****er9
|    United Kingdom
Fixed Price: Not Sure   |  Posted: 10h, 45m ago  |  Ends: 6d, 13h  |   20 Proposals
I need the 4 elevation drawings in 3D rendering of exterior which has a parking lot I will send to you an already completed AutoCad file when job is awarded I need a 1 story version (approx. 10,000 sf and a 2 story version approx 20,000sf I need highest quality with realistic visual.with Textures Need to include 4 modifications/revisions. Need your design ideas with realistic setting I need plants and trees in the rendering. Definitely the Exterior is brick and stone. I need you to provide me the source file in order to complete my work. Provide me your total cost for this job.
Category: 3D Modelling       
Skills: AutoCAD, 3GSM, AutoDesk Revit, Autodesk       

T****h31
 [?]
Sign in to view client's details.
| T****h31
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 11h, 2m ago  |  Ends: 6d, 12h  |   10 Proposals
The job involves converting two gerber files (to be provided) into the respective CAD files so that these PCB CAD files that can be edited. The gerber files were given for a reference layout of a electronic component application; unfortunately the existing layouts are not optimised for heat dissipation and the OEM will not supply the CAD files. Gerber File #1: Two layer boards (top and bottom); two traces only Gerber File #2: Four layers boards (top RF signal, RF signal ground, DC signal, DC signal ground); three RF traces; some DC traces. Deliverables of this project: 1. CAD files for the two PCB designs; 2. Check and verification of the gerber vs CAD output Please let me know if you are interested.
Category: CAD       
Skills: Altium Designer, Electronic Design       

J****510
 [?]
Sign in to view client's details.
| J****510
|    Hong Kong SAR, PRC
Fixed Price: Less than $500   |  Posted: 11h, 27m ago  |  Ends: 14d, 12h  |   10 Proposals
Please see attached images. We want a design to build something under our existing deck- using the 4 posts--current deck is 12-20 feet above grade. The posts under deck are 10' X16' rectangle-deck upper deck overhangs that. There is also another area that could be used next to the deck..under the porch. Will be used for kids between 6-18 years old. Think of something new an unique...outside the box....something crazy...something fun! Could have multiple levels, an enclosed "tree house", swings or rope lines, zip lines to ground, ladders to connect levels, fireman pole, rock climbing wall, slide, rope net... be creative! Would want to see very basic sketches before awarding to help decide. This is a FUN project...only fun people should bid. Bid should include concept sketches- and revisions...3D model renderings, and plans.
Category: Architecture       

J****erg
 [?]
Sign in to view client's details.
| J****erg
|    United States
Fixed Price: Not Sure   |  Posted: 14h, 23m ago  |  Ends: 14d, 9h  |   12 Proposals
Hello, We are looking for an experienced electronic engineer, who could develop a PCB ( schematics, routing and at least basic firmware ) for a camera, that would be using the OV13850 image sensor, save images/video to a micro SD card and/or transfer them via wifi. you are free to select a microprocessor or FPGA that you are most familiar with, as long as it is available, would be able to handle 13.5MP images/video and costs user 25$ or so. other requirements during future communication.
Category: Electrical       

C****mes
 [?]
Sign in to view client's details.
| C****mes
|    Latvia
Hourly Rate: Less than $10 / hr   |  Duration: 3-4 weeks  |  Posted: 17h, 38m ago  |  Ends: 14d, 6h  |   12 Proposals
I am looking to have a range of designs, and then plans drawn for screens/shelters to improve the aesthetics of garbage bin storage areas. The screens will be for a range of bin sizes and be suitable for residential or commercial garbage bin locations. The designs & plans will be as such that they can be taken to a local Australian aluminium or steel manufacture to build with generic parts, (prefer no custom moulds or components that require new extrusions or similar). Once the screen designs and plans are in place I would like to have 3D models of them generated in a range of different finishes (visual only). These 3D models will then become part of a virtual showroom to be utilised in an app that allows people to photograph their bins, and then select the look and finish of the bin screens from within the app. To summaries, 1, Design bin screens. 2, Draw plans for each in the range. 3, Create 3D modelling for each of the range in a couple of different colours/materials. ...
Category: CAD       

B****ens
 [?]
Sign in to view client's details.
| B****ens
|    Australia
Fixed Price: $100 - $200   |  Posted: 19h, 28m ago  |  Ends: 14d, 4h  |   6 Proposals
The objective is to design and fabricate one or several circuit board(s) capable of collecting multiple vital signs (ECG, SpO2, Temperature). The design can be a new design or one that is based on an existing reference design if the requirements can be met. If a reference design is used, schematics and demo software/firmware will be provided by the freelancer. The requirements are: - Capable of measuring ECG, pulse oximeter (SpO2), and temperature - Use an embedded 32-bit microprocessor with DSP functionality - Data collection of ECG and SpO2 must be simultaneous or with a low, deterministic latency (<1ms) between ECG/SpO2 samples - Sampling of ECG/SpO2 should occur at a rate higher than 100Hz with a good signal-to-noise ratio - Communication over USB/RS232 to a PC host - Onboard storage for at least 10 seconds of ECG/SpO2 data - Powered by a +5V DC power supply. Preferably a USB port. - A touch or infrared sensor for temperature - Firmware/software program demonstrating the ...
Category: Electrical       

m****sia
 [?]
Sign in to view client's details.
| m****sia
|    United States
Fixed Price: $500 - $1,000   |  Posted: 21h, 34m ago  |  Ends: 14d, 2h  |   2 Proposals
Hi, i am looking for some one who can help & design complete hardware to insert text into cctv video camera. Input : from POS system link shows exact final output.   [obscured]  /watch?v=wzkPFapw88A Thanks.
Category: Electrical       

1****in9
 [?]
Sign in to view client's details.
| 1****in9
|    United States
Fixed Price: Not Sure   |  Posted: 23h, 8m ago  |  Ends: 14d, 0h  |   4 Proposals
I need a complete camera case design that meets standard carry-on requirements of all airlines. General specs for carry on are 22x14x9 inches and 15#. This bag needs to safely and securely house a dji phantom 3 (including controller, charger and 2 batteries), a canon rebel t3i with a 17-40 mm lens, an 8-15 mm lens, a gopro camera and some accessories such as cables, gorillapod, feiyu wearable gimbal and battery charger. Drones are usually housed in dense foam and camera gear is usually housed in padded compartments but I cannot find a design that will house both with required specs. Example of drone storage:   [obscured]  /HPRC-HPRC2700WPHA3FO-Custom-Phantom-Black/dp/B00ZL3F2UY/ref=sr_1_1?ie=UTF8&qid=1441242471&sr=8-1&keywords=phantom+3+foam&pebp=1441242470657&perid=1HW0BBTQNFNBSJFA2MNG Example of camera storage;   [obscured]  /products/shootout-backpack-le-small-black.aspx Prefer ability to switch out camera gear as necessary; so prefer hou...
Category: Product Design       

r****a15
 [?]
Sign in to view client's details.
| r****a15
|    United States
Fixed Price: Less than $500   |  Posted: 23h, 15m ago  |  Ends: 14d, 0h  |   6 Proposals
I am looking for a person to get me a few quotes on a custom made metal piece that I use in my manufacturing. The metal piece will need a quote that includes shipping to Kansas City
Category: Contract Manufacturing       

M****les
 [?]
Sign in to view client's details.
| M****les
|    United States
Fixed Price: $25 - $75   |  Posted: Sep 02, 2015  |  Ends: 23h, 11m  |   8 Proposals
We are a spice manufacturer. Job Description: We are looking for someone with advanced experience working with Illustrator to take our logo and apply it to 2 different size labels to create new label designs with creative eye-catching effects. This should be a quick and simple project for someone with experience as we are providing you with our logo and the dimensions for our new labels. Label 1 7" x 3" Label 2 5 3/4" x 2 1/2" We would like to have at least 3 mock-ups submitted in phase 1 and we need to have final labels completed within 2 days of starting the project. Prefer, but not a requirement, someone that enjoys eating spicy foods. We need proofs to be sent in PDF format and final designs to be submitted in both PDF and Ai. Additional the designs must be in high resolution and print-ready format.
Category: Graphic Design       
Skills: Graphic Design, Adobe Illustrator CS6       

s****ike
 [?]
Sign in to view client's details.
| s****ike
|    United States
Fixed Price: $250 - $300   |  Posted: Sep 02, 2015  |  Ends: 1d, 22h  |   33 Proposals
Our current website does not meet our standards as in comparison to our competitors. Therefore, we want to update website in order to have a more optimized, exciting website that not only catches the attention of visitors but also converts them into buyers. A huge plus but not a requirement would be if you have a knowledge of or enjoy eating really spicy foods as your input will be valuable for the redesign of our website. We want to take our website to the next level and make it impressive! If this your forte then you might be person for this job. This is a link to our competitors website:   [obscured]  -pepper.com. We want our site   [obscured]   to be better and to be sophisticated and elegant with a Ghost Pepper theme. Please keep in mind that this could be the first of many more future projects, as we have over 20 other websites. We also want someone that is honest about their abilities, will guarantee their work, adhere to the agreed upon schedule, and stay in constant co...
Category: Website Design       
Skills: Adobe Air, CSS, HTML, PHP       

s****ike
 [?]
Sign in to view client's details.
| s****ike
|    United States
Fixed Price: Not Sure   |  Posted: Sep 02, 2015  |  Ends: 13d, 22h  |   8 Proposals
Looking for designer to bring my clothing apparel concepts to life as well as contribute to design improvements. Designer must be able to provide sketch and create prototype for manufacturing. Standard responsibilities will include, - creating/visualising an idea and producing a design by hand or using computer-aided design (CAD); - keeping up to date with emerging fashion trends as well as general trends relating to fabrics, colours and shapes; - developing a pattern that is cut and sewn into sample garments and supervising the creation of these, including fitting, detailing and adaptations; - assisting with the sourcing, selecting and buying fabrics, trims, fastenings and embellishments for Founder's approval
Category: Other - Design       

d****ute
 [?]
Sign in to view client's details.
| d****ute
|    United States
Fixed Price: Not Sure   |  Posted: Sep 02, 2015  |  Ends: 1d, 21h  |   0 Proposals
Hello, I wanted to know if you could help me. I'm designing a new product that needs an internal power generation. My research has steered me towards "disc type axial flux generators /motors". See attached sketch idea. Basically I need a test bed to prove theory I have based on the contrasts that are given. I can't fully describe the entire design but part of it needs to generate electricity and output it to a outlet, which kind of mimics a typical low voltage wall outlet performance you would find at a normal house. The initial device constraints was to have a cylinder can design with a max diameter of 3.5 -5 inches, and have the device be very light weight, and requiring very little force to spin the axial flux inside. I have not specified a height yet this is all a idea in testing phase. What I'm requesting is a design or instructions to create a test bed in my shop and so I can build and tested it, the shape and design are critical. This is a generator, I will ...
Category: Electrical       

m****478
 [?]
Sign in to view client's details.
| m****478 *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Sep 02, 2015  |  Ends: 13d, 20h  |   3 Proposals
We are seeking industrial design proposals for a consumer EEG device currently under in it's hardware phase. While the hardware component has been finished the device is currently not designed for consumer use. We is seeking an industrial designer to help with the design phase of the project. Having an understanding of the manufacturing process and component costs will help in the decision making process as it is important to us that the industrial design lead is aware of cost when making their designs. Previous portfolios and experience will play a big factor in the decsion making process.
Category: Other - Design       

P****ics
 [?]
Sign in to view client's details.
| P****ics
|    United States
Fixed Price: Not Sure   |  Posted: Sep 02, 2015  |  Ends: 13d, 18h  |   19 Proposals
I have an idea for a product, but can't seem to come up with the right design. I need the help of an expert to help complete the design. I will attach a list of what the product will have.
Category: Product Design       

t****093
 [?]
Sign in to view client's details.
| t****093 *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Sep 02, 2015  |  Ends: 28d, 17h  |   3 Proposals
Imperium, Inc. is presently contract work by a Senior Mechanical Engineer with a minimum of 10 - 15 years of mechanical instrumentation and device experience. Experience to include full life cycle precision product development from concept into production, human engineering design, layout and drawing generation, working with vendors, validating prototypes, and providing sustaining assistance with production released products. 7 years Solidworks experience required. Handheld rugged instrumentation development experience preferred. Candidates must be in the Washington DC or Baltimore area. Candidate shall be capable of collecting and maintaining requirements in electronic format, developing concepts, design layouts, and calculations to support design concepts. Must have good communication skills, require little or no supervision, and possess exceptional creative skills. Optimal additional areas of experience include basic motion control and mechanism design, optical design and indu...
Category: Mechanical       
Skills: SolidWorks, 3D Design, Packaging Design, thermal       
Preferred Location: United States

b****ser
 [?]
Sign in to view client's details.
| b****ser
|    United States
Fixed Price: Not Sure   |  Posted: Sep 02, 2015  |  Ends: 13d, 17h  |   15 Proposals
Hello, I'm looking for mechanical engineering to join me on upcoming projects. Current project revolves around sheet metal housing. Only people with a strong portfolio will be considered. The ability to speak with me through SKYPE is a must. Thank you all for your time.
Category: Mechanical       
Preferred Location: North America

c****els
 [?]
Sign in to view client's details.
| c****els
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job