Save this Search
     
Sort by:
  • Posted Date
Results for 'Manufacturing Design Mechanical Engineering'
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 6h, 33m ago  |  Ends: 14d, 17h  |   5 Proposals
we are looking for a engineer or draftsman to design and detail light gauge steel house frames, we currently use truss d&e but anyone with experience in : Vertex : Framecad : any other This will be ongoing work on a long term basis.
Category: CAD       

j****100
 [?]
Sign in to view client's details.
| j****100
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 12h, 57m ago  |  Ends: 6d, 11h  |   3 Proposals
We have a spinning display (prototype) which has a 7" display, motor to spin our product and using an Olimex board to run the video / audio. We have successfully prototyped this and now, we need a freelancer to optimize this design and prepare it for manufacturing as the cost is too high using the Olimex board and the associated 7" LCD/controller board. We are using a standard microwave oven motor to independently spin our product and this is directly connected to a switch and powered directly to an AC power source. The motor turns 360 degrees and then automatically reverses since we have created a mechanical stop. The way the unit will function is as follows: 1) User will turn on a power switch located on the bottom of the display 2) Display will provide power to the motor which will start spinning and simultenously power the microcontroller board to run the OS (i.e. Linus/Android). 3) OS will initiate and the user will see a splash screen which will allow them to e...
Category: Electrical       

p****one
 [?]
Sign in to view client's details.
| p****one
|    United States
Fixed Price: Not Sure   |  Posted: 21h, 38m ago  |  Ends: 14d, 2h  |   1 Proposal
Hey guys, I have a few small specialized motors with a USB development kit as well as a distance sensor with a USB interface that I need to be able to communicate with via a .NET application. What I'm looking for is a developer that has experience with mechanical components like this that can actually create an interface class/library for me in C#. I was going to try to do this myself but I've only an intermediate level of experience with C# and would rather have a professional take care of this part so that I can strictly focus on building the application I'm after. The point of the class/library is to be able to easily recognize & control the equipment when connected to a PC. The reason I'm looking for a developer in the US is so that I can actually send them the components to do the testing with and they can return them upon completion. I'd be open to working with someone outside of the US however I may not be able to send the equipment to them so I don't know how that wi...
Category: Mechanical       

t****525
 [?]
Sign in to view client's details.
| t****525
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 3-4 weeks  |  Posted: 23h, 52m ago  |  Ends: 24d, 23h  |   8 Proposals
This unit will be included in a hydrogen on demand system. Initial design ideas to field test a small number of units. later refine as required to go into production.
Category: Mechanical       

P****s08
 [?]
Sign in to view client's details.
| P****s08
|    Canada
Fixed Price: $1,000 or less   |  Posted: May 23, 2015  |  Ends: 13d, 22h  |   15 Proposals
We have a 3 stage bevel-spur gearbox design which requires analysis to determine its operating limits for various torque/speed/overhung load/operating hour combinations with reference to the relevant FEM, DIN and ISO standards. The analysis will need to include documented stength and life calculations for all the gears, bearings and shafts, as well as calculations for housing strength. The final output will be a number of charts plotting torque against speed for various overhung loads and design lives as per the attached example. The successful bidder will be required to sign an NDA.
Category: Mechanical       

p****ald
 [?]
Sign in to view client's details.
| p****ald
|    Italy
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: May 23, 2015  |  Ends: 13d, 19h  |   3 Proposals
Project Management Multi-disciplinary, including the fields of mechanics, hydraulics, electronics and Fniaomatikh. ? exploring problems, and providing engineering solution. Accompanying the design up to the implementation and customer satisfaction. ? Preparation of models for analysis, and analysis during the planning application. Management and setting hydraulic experiments, according to national or international standards which include the measurement accuracy of the product, half explosion, testing life cycles, and so on. ? Work with suppliers and guidance at all stages of production. ? Preparation and presentation of design reviews. ? Performing strength calculations Solidworks Simulation software and analyzing failures. ? Engineering design of products for measuring water and accessories broadcast information includes: design of buildings, packaging, plastic injection design, casting design brass machining and preparation of manufacturing drawings. ? Manage project teams include: ...
Category: CAD       

T****gin
 [?]
Sign in to view client's details.
| T****gin
|    Israel
Fixed Price: $500 - $1,000   |  Posted: May 22, 2015  |  Ends: 28d, 4h  |   0 Proposals
Arlo Skye is a startup. We are obsessed about bringing back desirability in luggage. We believe that luggage shouldn't just be a boring utility, but in fact a reflection of your appreciation of aesthetic and good taste. And we believe that all this should not cost you an arm or a leg. We are starting this journey by manufacturing two products from the same family: 2-wheeled and 4-wheeled Carry On. We have just finalized the 3D external design of the 2 wheeled and 4 wheeled carry on. We are now searching for a talented pattern maker who a basic understanding of engineering. You also need to have a basic understanding of hard-luggage construction. Both of the carry-ons will have an internal ABS Plastic light weight internal frame, and encased by PVC coated cotton canvas, with a leather trim, pockets, and zips. This is a chance for you to make a real difference in peoples lives by designing something incredible. What you'll do: - You will create manufacturing ready desig...
Category: Product Design       

a****kye
 [?]
Sign in to view client's details.
| a****kye
|    United States
Fixed Price: Less than $500   |  Posted: May 22, 2015  |  Ends: 13d, 4h  |   3 Proposals
Simple modification of an FRS or similar radio module to send an alert tone in response to a switch opening (reverse sense from normal). Second phase after proof-of-concept may involve some mechanical packaging in existing molded housing.
Category: Electrical       
Skills: Circuit Design, Analog Electronics       

A****297
 [?]
Sign in to view client's details.
| A****297
|    United States
Hourly Rate: $40 / hr or less   |  Duration: Not Sure  |  Posted: May 22, 2015  |  Ends: 13d, 3h  |   24 Proposals
PLEASE READ! I am looking for an engineer who can create the inner workings of a new Blender Idea I have. An NDA has to be signed and this is a for-hire job unless I find a great engineer and we can discuss a small partnership in the idea. I will be giving you a concept and you will give me how my concept can realisticly work with designs and how the mechanics make it work so i can submit to a manufacture. Please be creative and understand how Blenders rotate and spin
Category: Mechanical       
Skills: 3D Modeling, AutoCAD, Electrical Engineering       

c****est
 [?]
Sign in to view client's details.
| c****est
|    United States
Fixed Price: Less than $500   |  Posted: May 22, 2015  |  Ends: 12d, 15h  |   6 Proposals
We require an engineer to consult us on the plausibility of our idea and solutions to a few engineering problems we have for said idea. We need an engineer who is experienced with current bluetooth/wireless technology, small electronic measuring parts, and circuit/programming knowledge. We aren't necessarily looking for a full-up design files, but we would like to know if what we are trying to do is plausible and what technologies we would need to accomplish it.
Category: Electrical       

d****ses
 [?]
Sign in to view client's details.
| d****ses
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 21, 2015  |  Ends: 12d, 7h  |   5 Proposals
I need to design a machine(non automated) that will help assembly line workers fill delicate flowers into bottles quickly FLowers are approximately 5mm and opening in the bottle is about 5mm The flowers have petals that can bend in so it can go in by hand or using a funnel We need a quicker solution Thank you
Category: Other - Engineering &...       

m****inc
 [?]
Sign in to view client's details.
| m****inc
|    United States
Fixed Price: $500 - $1,000   |  Posted: May 21, 2015  |  Ends: 12d, 7h  |   10 Proposals
I am looking for a mechanical engineer who has experience in CAD and prototyping. I live on Long Island and would prefer someone who is located in the New York City area or close to it. Someone who is able to meet in person and talented.
Category: CAD       

J****016
 [?]
Sign in to view client's details.
| J****016
Fixed Price: $500 - $1,000   |  Posted: May 21, 2015  |  Ends: 5h, 59m  |   6 Proposals
Need MEP design and drafting documents for construction for two buildings. Please provide questions if needing more info before a specific proposal can be provided. Would like a provider with familiarity of US MEP standards.
Category: Mechanical       

s****ina
 [?]
Sign in to view client's details.
| s****ina
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 21, 2015  |  Ends: 12d, 4h  |   23 Proposals
I am in need of an Industrial Designer/Mechanical Engineer who can put together some drawings for me 2-D, 3-D for use in provisional patent application. Would also need to have these drawings later worked up to be precise enough for the prototype specs. The product to be designed is a beauty product for use specifically around the eyes/eyelashes and very similar to an eyelash curler. Would also need guidance on having the prototype built. Please contact me with your rates and experience in the area of cosmetics/beauty industry, if any, although not a must. The important thing is a very skilled designer who can help bring the concept into reality.
Category: 3D Modelling       

d****csr
 [?]
Sign in to view client's details.
| d****csr
|    United States
Fixed Price: Less than $500   |  Posted: May 21, 2015  |  Ends: 11d, 23h  |   10 Proposals
Please download files outlining various mechanical design tasks:   [obscured]  /download/a04d18ddbg1kayi/mechanical_design_6.rar Includes word doc (with task descriptions) and 2 Solidworks assembly files. - Task 1 is most important. Please initially quote for doing task 1 only - Outline your approach to resolving task 1.
Category: Mechanical       
Skills: Mechanical Design       

O****ODM
 [?]
Sign in to view client's details.
| O****ODM
|    United Kingdom
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: May 21, 2015  |  Ends: 11d, 21h  |   4 Proposals
Design of Thermal system Stoecker edition 3 comprehensive problem A-10 optimum gas pipeline and pumping facility where work can be recovered at destination ......
Category: Mechanical       
Skills: SolidWorks, Mechanical Engineering       

m****ary
 [?]
Sign in to view client's details.
| m****ary
|    Pakistan
Fixed Price: More than $10,000   |  Posted: May 21, 2015  |  Ends: 11d, 19h  |   3 Proposals
Field Service / Applications Engineer Company Work Location: Waukesha, WI Salary: $60,000 - $80,000 Job Description: Experienced Field Service / Applications Engineer is required having responsibility to Supports Sales by evaluating the Technical/Commercial feasibility of a tender and help to clarify customer inquiries and specifications. Requirements: ? Experience with Mitsubishi, Fanuc, and Siemens controls is critical. ? Min. 2-3 years working experience with Turbo-expanders and/or Compressors. ? 5 to 10 years of experience in design engineering, applications engineering, high technology sales support, or field service. ? Requires knowledge of API, ASME, NEC (or IEC) codes. ? Experience integrating automation and motion control components such as motors, feedback devices and servo drives and controllers ? Process design knowledge, experience reading and interpreting technical specifications, and familiarity with technical drawing sets. ? Ideally someone with experience in...
Category: Electrical       

P****era
 [?]
Sign in to view client's details.
| P****era
|    India
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: May 21, 2015  |  Ends: 11d, 18h  |   1 Proposal
Fabric Researcher to research weavers and spinners who have the ability and skills to produce Inherent Flame Resistant Woven and Knitted Fabrics in Turkey. The applicant should be local to and live in Turkey.
Category: Contract Manufacturing       

T****ett
 [?]
Sign in to view client's details.
| T****ett
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 21, 2015  |  Ends: 11d, 17h  |   10 Proposals
Strongly developed shotgun concept needs to be turned into Solidworks drawings / files. Knowledge of firearms design and prototyping needed. Knowledge of, or willingness to quickly learn about, boxlock brake action mechanisms needed. Preferably based in the USA in a gun friendly state. You must have a full IT set up at home / in your office. If everything works out some travel later on. Engineering background would help. I'm looking for a firearms professional with detailed knowledge of guns and their workings, able to realise a vision in Solidworks and help with taking it to manufacture. Get in at the ground level! The future is open. We'll get on better if you have a sense of humour and are able to express yourself clearly. Initial job paid as a freelancer hourly. Market rates. This could be fun!
Category: Product Design       
Skills: SolidWorks       
Preferred Location: North America

S****001
 [?]
Sign in to view client's details.
| S****001
|    United Kingdom
Fixed Price: Not Sure   |  Posted: May 21, 2015  |  Ends: 11d, 12h  |   25 Proposals
Need a designer that has extensive experience with kids toys or kids related product. The product is for 3D lunch box similar to piggy bank concept.
Category: 3D Modelling       

a****lie
 [?]
Sign in to view client's details.
| a****lie
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 20, 2015  |  Ends: 11d, 11h  |   2 Proposals
This build is for a custom pinball machine for my kids, I only need the altium design file, as well as the design of what parts to use where in the circuit. It is only a small task, and I will be able to print the board when I receive the altium file. I need a circuit with a picaxe(08M2 or 14M2) controller controlling it, and I have a 12V and 5V input, as well as ground cables. I have two coin mechanisms that need a 12V input and a ground output, and they have an output for data, that can go straight to the picaxe. One coin mech will have $1 coins input and give you 1 life, where a $2 coin will give you 3 lives. I then have 2 sets of 12V solenoids for the flippers of the machine. They are in line with a light up 12V button. these would need to be in line with a relay or 2 so they only fire when the machine is ready to play. Then I have another 12V solenoid for the game start in line with another light up 12V button. These need to be hooked up so that when a signal is received from...
Category: CAD       
Skills: 3D Modeling, Altium Designer, AutoCAD, SolidWorks       

J****123
 [?]
Sign in to view client's details.
| J****123
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 20, 2015  |  Ends: 11d, 6h  |   6 Proposals
I build water treatment plants that keep wash water odor free and grey so companies can reuse their wash water safely. I need drawings of the tanks and bio-systems and the plumbing.
Category: CAD       

c****sey
 [?]
Sign in to view client's details.
| c****sey
|    United States
Fixed Price: Not Sure   |  Posted: May 20, 2015  |  Ends: 11d, 3h  |   4 Proposals
UK based company requires a product sourcing specialist for various product types worldwide. Unique product identification software developed. Company requires experienced product sourcing specialist for rapidly growing online sales model.
Category: Other - Engineering &...       

G****ert
 [?]
Sign in to view client's details.
| G****ert
|    Ireland
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 20, 2015  |  Ends: 10d, 23h  |   5 Proposals
I am looking for help taking an idea from a sketch to a 3D model. The idea is to have a soap dispenser that when a child pushes down on the character/car/animal etc, soap foam will squirt down onto his hand. There are other aspects that I am glad to explain but what I am ideally looking for is someone with visual design experience who can also translate the mechanical elements into plans and a 3D model that can ultimately be used by a third party manufacturer to produce the product. Please let me know if you are interested and what your expectation of time and total cost would be. I am looking for relevant experience from candidates with good feedback and a portfolio that they can show past examples of work done. Happy to provide more product details if need be. Thank you very much, Rob
Category: Product Design       

R****fee
 [?]
Sign in to view client's details.
| R****fee
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job