Save this Search
     
Sort by:
  • Posted Date
Results for 'Manufacturing Design SolidWorks'
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 1h, 1m ago  |  Ends: 14d, 22h  |   1 Proposal
I have a working prototype for a product. It is a 3 inche long tube made of silicone. A protective sheath that that fits two fingers. I need an AutoCAD or similar file made in order to have this device reproduced. Acceptable file formats are:IGES (.igs), (.stp), SolidWorks (.sldprt), PTC Creo (.prt), Parasolid (.x_t and .x_b), ACIS (.sat) AutoCAD (.dwg, 3D only), Autodesk Inventor (.ipt) I would like to work with someone that is close to Minneapolis. I would like to provide the designer with the physical prototype to recreate. Cost is negotiable. I will pay more for fast turn around
Category: 3D Modelling       
Skills: Autodesk Inventor, AutoCAD, SolidWorks       

j****rai
 [?]
Sign in to view client's details.
| j****rai
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 2h, 10m ago  |  Ends: 14d, 21h  |   0 Proposals
We wish to have a thermal test done on our new lighting collection "Crisp". Here are the parameters: Test range of ambient temperatures -Warm (20-45 C / 68-113 F) -At 5 C increments Material and Product specs included in Package - Light engine spec sheet, , assembly materials) - thermal paste Test with Gypsum Drywall & Junction Box in worst condition (upside down already positioned in SolidWorks Assembly-Materials have been assigned to part files - Use "CP-CFM Crisp with mount thermal rO" for testing) Deliverables -Cut away section views of complete assembly w thermal shading at each 5C increment -Specific point temperatures indicated at IC, LED, and hottest point on assembly Assumptions -Typical convective air flow (no wind etc) Timelines - Testing completed for Firday July 3, 2015 - Monday July 6,2015
Category: Mechanical       

T****RBW
 [?]
Sign in to view client's details.
| T****RBW
|    United States
Fixed Price: Not Sure   |  Posted: 15h, 21m ago  |  Ends: 14d, 8h  |   0 Proposals
Requirements Design and deliver Design Package which includes the following features: Three Capacitive Sense button configurations suitable for interfacing to an Atmel D2x controller 3 Buttons - 1 x 3 6 Buttons - 2 x 3 1 Button -1 x 1 An ambient light sensor with an I2C interface RGB uniform backlight with separate CMOS level control for each button Minimal number for orderable part numbers Input Deliverables from GOT Interface 6-Button 2D Drawing ( GOT Interface 6 Button.pdf) 3- Button 2D Drawing ( GOT Interface 3 Button.pdf) Image of all three Button Configurations (Custom Cap Touch 2.jpg) RGB LED Specification sheets (XZMDKDGCBD56W.pdf) Ambient Light Sensor Specification sheet (TSL45315) Output Deliverables to GOT Interface Design Package CapSense Circuit Schematics, Gerber files, Fabrication Drawing and Assembly Drawing. LED Circuit Schematics, Gerber files, Fabrication Drawing and Assembly Drawing. Light Guide Film 2D Drawings and 3D Drawings Zemax of other r...
Category: Product Design       

d****iba
 [?]
Sign in to view client's details.
| d****iba
|    United States
Fixed Price: Less than $500   |  Posted: 19h, 23m ago  |  Ends: 14d, 4h  |   18 Proposals
I need a case designed that can be 3d printed. The case is to hold a solar powered optical sensor. The case needs to protect from rain and snow, yet allow airflow through to keep the battery cool. The device needs to hold a solar panel (4.9 X 2.5 X 0.11 inches) and it needs a small window that will hold a small 1" square piece of glass. The case needs to sit on a slanted roof. The bottom of the case needs to sit at an angle of 18.43 degrees with a shavable line to allow for 26.57 degrees (or vice versa). The small window for the optical sensor needs to be parallel with the angled mount. The interior needs to hold a circuit board about the size of a credit card. And the entire space should be minimized as much as possible.
Category: 3D Modelling       

M****isT
 [?]
Sign in to view client's details.
| M****isT
|    Canada
Fixed Price: $500 - $1,000   |  Posted: Jun 29, 2015  |  Ends: 13d, 22h  |   12 Proposals
I'm wanting to design a desk that has an articulating arm for a specific use. I'm looking for the design to be done and payment to be paid in % of the company. I have pitched this product to Walmart and Staples. Both are receptive. I need this design to complete my patent application.
Category: Mechanical       

s****r96
 [?]
Sign in to view client's details.
| s****r96
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: Jun 29, 2015  |  Ends: 13d, 21h  |   7 Proposals
We are working on a house plan, I need to adjust the floor plan as needed to accommodate HVAC supply and return lines and chases. I would like all ducting to be inside the insulated envelope. I would like the following: 1. Analyze the floor plan 2. Draw the supply and return lines 3. Suggest chase placement. The floor plan could be provided in DWG format, Chieft architect is preferred. International applicants must have experience with US HVAC standards. Please do not apply if you don't meet this requirement.
Category: Mechanical       
Skills: AutoCAD, SolidWorks, Mechanical Engineering       
Preferred Location: United States

f****r25
 [?]
Sign in to view client's details.
| f****r25
|    United States
Fixed Price: Less than $500   |  Posted: Jun 29, 2015  |  Ends: 1d, 16h  |   34 Proposals
Hi there, we need an awesome AutoCAD geek for designing a little piece of hardware with a PCB inside. The model will then be used for molding (Polycarbonate) We believe this job won't take longer than a day. We know, we know, it's just a small job, but hopefully there's gonna be more for the future. Details on request.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

S****men
 [?]
Sign in to view client's details.
| S****men
|    Germany
Fixed Price: Not Sure   |  Posted: Jun 28, 2015  |  Ends: 13d, 3h  |   7 Proposals
GOT Interface ? Request For Quotation Design Proposal GOT-20150626-010 Solidworks Modeling and Altium FPC Layout Phase I Design Objective ? ? Create 3D Solidworks parts (surface models) of seven (7) Flexible Circuits GOT-01400467-18 Rev C 6-25-15 Model.dwg for 2D dimensional data ? Incorporate these seven (7) FC into an existing 3D Solidworks assembly ? Using the FC connectors as reference points, create a Solidworks part (surface model) for a Main Interconnect Flexible Circuit, see GOT-01400467-18 Rev C 6-25-15 Model.dwg for reference. ? Complete a tolerance stack analysis of these two parts in the assembly and correct any issues in the Main Interconnect Flexible Circuit. This tolerance stack up will need to take into account the placement variability of the seven (7) Flexible Circuits in the front cover. ? Create 2D dimensioned pdf and a .dxf FPC Layout control drawing for the Main Interconnect Flexible Circuit. Input Deliverables ? ? Enclosure Solidworks Assembly model ? Flexibl...
Category: Product Design       

d****iba
 [?]
Sign in to view client's details.
| d****iba
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 3-4 weeks  |  Posted: Jun 26, 2015  |  Ends: 26d, 2h  |   26 Proposals
I need someone who is good with 3D STUDIO MAX and Solidworks to be able to draw the designs i already have in 3ds max into solidworks
Category: 3D Modelling       

G****YST
 [?]
Sign in to view client's details.
| G****YST
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jun 26, 2015  |  Ends: 10d, 15h  |   4 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Cherchons un dessinateur pour la réalisation de plans techniques. A rendre le 30/06/15.
Category: CAD       
Skills: AutoCAD, OrCAD, SolidWorks, 3D Design       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 26, 2015  |  Ends: 10d, 11h  |   12 Proposals
New business venture looking for an skilled individual in sunglasses design. Open to a variety of different experience levels, but would prefer someone with at least 3-5 years of design experience. Pay and weekly time commitment is negotiable. Looking to get several designs for multiple sunglasses lines (men's/women's) over to manufacturer as soon as possible.
Category: Product Design       
Preferred Location: North America

r****n72
 [?]
Sign in to view client's details.
| r****n72
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jun 25, 2015  |  Ends: 25d, 6h  |   24 Proposals
I have a prototype, but need someone that can make a battery to last longer and someone to make its design more clean and smaller. If anyone has experience please get in touch with me as soon as possible.
Category: Electrical       

M****539
 [?]
Sign in to view client's details.
| M****539
|    United States
Fixed Price: Less than $500   |  Posted: Jun 25, 2015  |  Ends: 9d, 21h  |   7 Proposals
Thank you for your interest in this job posting. My company seeks and experienced eyewear designer who was worked on eyewear design projects before and who is knowledgeable of the intricate details it takes for a pair of sunglasses to not only look great, but for it to also fit great. We already have a succinct model that you will be basing your design work around. At this time, the model has been 3d printed and it still doesn't fit perfectly. This is why we need you to have experience in designing and/or manufacturing eyewear so that you can identify and fix whatever the issue is causing it to not fit right. In your proposal please submit some recent work and describe to us how you are qualified for the task, highlighting in particular how you will go about evaluating the dimensions of the current model, what standard you will be comparing it to, and the way in which you will make changes. The timeline of this project can be however long it needs to be to get this right. Once...
Category: Product Design       

d****li6
 [?]
Sign in to view client's details.
| d****li6
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Jun 24, 2015  |  Ends: 19d, 22h  |   7 Proposals
I am looking for an Opto-mechanical Engineer to design optical microscopy system design using Glin lens. We will add two imaging system: Scanning Laser Microscopy and Optical Coherence Tomography. We will use scanners for this image system. Also Glin lens will be used for this microscopy. First, using Zemax you will design systems. Second, Mechanical design using Solidworks. Good knowledge for Zemax and Solidworks is required.
Category: Other - Engineering &...       

t****iis
 [?]
Sign in to view client's details.
| t****iis
|    United States
Fixed Price: Not Sure   |  Posted: Jun 24, 2015  |  Ends: 8d, 20h  |   50 Proposals
Need drafter to develop assembly models of products and render them professionally. Design will include sheet metal part files to be assembled and rendered into single files.
Category: 3D Modelling       

k****usa
 [?]
Sign in to view client's details.
| k****usa
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jun 24, 2015  |  Ends: 8d, 18h  |   8 Proposals
The project is to design and manufacture a robot that will change the gear of a manual transmission (which would require use of additional actuators to engage the clutch) upon desired speed or acceleration. The mount for the system should be universal so that it could be mounted on any car.
Category: Product Design       

a****ski
 [?]
Sign in to view client's details.
| a****ski
|    Canada
Fixed Price: Not Sure   |  Posted: Jun 23, 2015  |  Ends: 7d, 22h  |   68 Proposals
We currently have approximately 120 products, none of which have up-to-date technical drawings with measurements. We need someone to take our products and create drawings based on the original samples we have.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks, Product Design       
Preferred Location: United States

b****ntr
 [?]
Sign in to view client's details.
| b****ntr
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 22, 2015  |  Ends: 7d, 5h  |   7 Proposals
Hi I need to make 100 of the following. They are made using 2 X 2pence pieces from the UK. The first coin is drilled to make a whole. The second is cut (CNC lathe) to make a plug for that whole. The plug is slightly chamfered so that when it is pushed into place it fits neatly and doesn't fall through the whole. The whole is also at the same angle making the plug fit neatly into it's whole. Please see attached image I will have a further requirement for the same made in ?2 coins and in US coins soon. It's important that when the plug is in it's whole the entire coin looks ordinary and the line where the two parts meet is only visible when you look very closely. It's for a magic trick! I would imagine that the angle of the chamfer is about 7degrees. However I'm not sure and I'm willing to take advice. I know this is a strange request. I hope to hear from you soon.
Category: Mechanical       

S****lin
 [?]
Sign in to view client's details.
| S****lin
|    Ireland
Fixed Price: Less than $500   |  Posted: Jun 22, 2015  |  Ends: 7d, 5h  |   39 Proposals
I own a bicycle company and I'm designing a new bicycle. I only have a PDF file that is based on an illustrator design I did. I do have frame dimensions but I don't have dimensions of all of the aspects of the bike but I'm looking to produce a 3D version in AutoCAD to present a client. I'm looking for something like my friend created, you can see here,   [obscured]  -industries.com/blogs/news/17178644-creating-with-cozy-part-2-the-cad I believe he used   [obscured]  /products/fusion-360/overview Attached is the drawing as done in Illustrator and attached is the frame measurements.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

d****ger
 [?]
Sign in to view client's details.
| d****ger
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 22, 2015  |  Ends: 6d, 13h  |   12 Proposals
From: Fahad Date: 6/6/2015 11:11:55 AM Hi there I haven't got all the details till now, but here few things which I know -Chose a circuit and design on Altium design 09. -PCP project -schematic -creating a new components and add to the new library. -solidwork. -3D It's all about the design of our circuit. Deadline will be on 17th of June . About the cost will not have a problem. If you have any questions feel free to ask . Thanks
Category: Electrical       

K****000
 [?]
Sign in to view client's details.
| K****000
|    New Zealand
Fixed Price: Not Sure   |  Posted: Jun 18, 2015  |  Ends: 3d, 9h  |   28 Proposals
We need to design a sheet metal box 1mm ss thickness. The box is 6ftx2.5x3ft It have doors 3nos and draws 2nos We will offer hand drawing for the same later.
Category: Mechanical       
Skills: AutoCAD, SolidWorks, Mechanical Engineering       

s****lex
 [?]
Sign in to view client's details.
| s****lex
|    India
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job