Save this Search
     
Sort by:
  • Posted Date
Payment Verified
Fixed Price: $500 - $1,000   |  Posted: Mar 23, 2015  |  Ends: 10d, 0h  |   6 Proposals
For new prototype of educational toy for children need to print Circuit Board design/layout maybe 2layer PCB, Prototype of it and Soft ware development for prototype.
Category: Product Design       

r****dar
 [?]
Sign in to view client's details.
| r****dar
|    United States
Fixed Price: Less than $500   |  Posted: Mar 23, 2015  |  Ends: 10d, 0h  |   6 Proposals
I need to find both a US supplier of heavy duty threaded tubing connectors. Quantities in the test order are fairly small, need 100 units of each. Second order after the initial test will be 2k units recurring every two months thereafter. These are threaded tubing inserts. I need inserts that accommodate the ID of 18 ga 1"OD steel tube and 1/4-20 screws. examples of heavy duty connectors. GN 992.5 on this page (  [obscured]  /industrial-manufacturer/threaded-insert-66076.html) and The second image from the left on page 8 of this catalog   [obscured]  /pdf/specialinsert-srl/crown-nut/58531-222507.html#open and DS71-325 on this page   [obscured]  /lg_display.cfm/catalog/Master_Catalog_Vol_42/page/246/highlight/ds%2072-325 I am aware of the usual carbon steel double star inserts available from McMaster and bicycle supple shops. I am looking for a connector that will be more resistant to being torqued out of the tube.(ID: 70564...
Category: Other - Engineering &...       

v****din
 [?]
Sign in to view client's details.
| v****din
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: Mar 23, 2015  |  Ends: 10d, 0h  |   4 Proposals
I need to sketch a design (human powered cultivator/seeder/plougher) which you can see from the link below. Instead of having 3 sowers (seeders) (boxes on the top), I need only one. The cultivators are at the bottom of the tractor. In the photo a shovel form cultivator is used, I need the roller type. A picture of it is also linked. Lastly at the bottom back of the design, I'd like to have a plough which would look like the third photo linked. I need a basic sketch (not very detailed) as I'm a college sophomore in an engineering course, not an engineer yet. The sketch can be done using hand or program, as you wish. The deadline is in 6 hours. Please call a price. God bless. Design:   [obscured]  /photo/v0/485258237/Corn_Planter_Machine.jpg Cultivator:   [obscured]  /wp-content/uploads/2014/11/  [obscured]  -0042.jpg Plough:   [obscured]  -img.com/gawker-media/image/upload/s--ejxKJYuN--/18pvrnnxmrz8ajpg.jpg
Category: 3D Modelling       
Skills: 3D, BASIC, 3D Design       

u****ker
 [?]
Sign in to view client's details.
| u****ker
|    United Arab Emirates
Fixed Price: Less than $500   |  Posted: Mar 23, 2015  |  Ends: 9d, 23h  |   26 Proposals
I am looking for a design that is modern, unique, and creative. Start from the front-end, roof, floor, lighting, shelving and etc.. Please find the attached pharmacy layout. Thanks.
Category: Interior Design       
Skills: 3D Modeling, Architecture, Interior Design       

M****aaq
 [?]
Sign in to view client's details.
| M****aaq
|    Saudi Arabia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 23, 2015  |  Ends: 9d, 20h  |   14 Proposals
Hello Did you receive the message via Elance with a drawing yesterday ? I have attached it with this job posting, we are looking to work long term with someone. This is something that we would need design, modelling, engineering and drawings. It needs to have weights so that they can be added, and needs to be able to be lifted with either a crane or forklift
Category: Product Design       

j****kes
 [?]
Sign in to view client's details.
| j****kes
|    Australia
Fixed Price: About $75   |  Posted: Mar 23, 2015  |  Ends: 9d, 19h  |   3 Proposals
Work with architect and local council (TAMS) to design and document two modern upgraded driveways as part of development application for two new residents on a corner block.
Category: Civil & Structural       

S****747
 [?]
Sign in to view client's details.
| S****747
|    Australia
Fixed Price: $1,000 - $5,000   |  Posted: Mar 23, 2015  |  Ends: 9d, 19h  |   5 Proposals
I currently need a town planner to write an environmental planning report for 22 apartments i am developing in Tamworth via submitting a development application to council. The council is Tamworth Australia, you will need to be familiar with LEP & DCP controls and writing environmental impact statements for development applications. You also need to be familiar with SEPP 1 & SEPP 5 Senior living. I have architectural drawings, the development controls and a report for the same architectural design but different council, but will provide a good example of what is needed. Please confirm if you have written environmental impact statements before for a development application and provide an example. Thanks
Category: Architecture       
Preferred Location: Australia/Oceania

j****per
 [?]
Sign in to view client's details.
| j****per
|    Australia
Fixed Price: $1,000 - $5,000   |  Posted: Mar 23, 2015  |  Ends: 24d, 19h  |   2 Proposals
I currently need a town planner to write an environmental planning report for 22 apartments i am developing in Tamworth via submitting a development application to council. The council is Tamworth Australia, you will need to be familiar with LEP & DCP controls and writing environmental impact statements for development applications. You also need to be familiar with SEPP 1 & SEPP 5 Senior living. I have architectural drawings, the development controls and a report for the same architectural design but different council, but will provide a good example of what is needed. Please confirm if you have written environmental impact statements before for a development application and provide an example. Thanks
Category: Architecture       
Preferred Location: Australia/Oceania

j****per
 [?]
Sign in to view client's details.
| j****per
|    Australia
Fixed Price: Less than $500   |  Posted: Mar 23, 2015  |  Ends: 1d, 16h  |   19 Proposals
I have a simple circuit schematic that I have done on eagle. I already bought all of the parts and hooked it up, but it is not working and I think it has something to do with the hardware. 1. I want to make sure that there will be enough power for all of the components, that I have the components hooked up correctly, and make sure that there are no shorts. a. I have datasheets for the components I am using, so that you can determine if there is enough power being supplied or too much. 2. If anything is not correct, I would like for you to correct this on the eagle schematic to send back to me. 3. If a component needs to be replaced or a component needs to be added, I would like to know which component and where I can find it. Also, if the voltage is incorrect, I would like to know what voltage I am supposed to use. 4. I would like a list of how much power is consumed by each component (There are only about 8 -10 components). It's a very small scale, simple project. I just want to m...
Category: Electrical       

g****nik
 [?]
Sign in to view client's details.
| g****nik
|    United States
Fixed Price: Not Sure   |  Posted: Mar 22, 2015  |  Ends: 9d, 15h  |   8 Proposals
Good day everyone! Thank you for taking an interest in on of my many on-going projects to aid the awareness of my new NGO Acting, Non-Profit Charitable Organisation. Currently we raise money for our organisation by taking our two cat mascots onto the city streets where people generally donate and others do so for a selfie with our mascots. If this isn't tiring enough standing there for a couple of hours in rather stuffy suits, our carrier is simply a large bag of which is extremely heavy! This project is to engineer concept art with your experience in engineering very much needed in a discussion prior submitting a quote price as I've got some bananza ideas such as lighting, sound and whatnot however I have not the experience to say how effective this will be, the battery size and whatnot. If you are an engineer who can fulfil design work to continue onto actual product production, please feel free to submit a quote and I will be in contact shortly after in regards for a detailed dis...
Category: Product Design       

M****all
 [?]
Sign in to view client's details.
| M****all
|    United Kingdom
Fixed Price: $500 - $1,000   |  Posted: Mar 22, 2015  |  Ends: 9d, 15h  |   2 Proposals
I am looking for someone to design a low cost handheld ticketing machine with in built battery. The system design should be such that we can modify the application code. The basic features of the machine are 1. 4 line display 2. battery backup 3. printer module 4. GSM/Wifi option 5. RFID reader support ( optional ) 6. GPS ( optional ) 7. SD card 8. Camera Module ( optional ) 9. Magnetic stripe reader ( optional ) 10. Barcode reader (optional ) I can give reference specifications of the product. I can also give a ready mould for the product which we can make use of. The firmware for application will be developed by another team, you only need to give test code which shows working of all sub module. By optional we mean we can add these modules if required in final product or can exclude that. The system design though should consider the same. I will require separately cost of making 1 prototype unit as well. So the bid should include 3 component: 1. System Design cost 2. Prototype...
Category: Product Design       

e****ign
 [?]
Sign in to view client's details.
| e****ign
|    India
Fixed Price: Not Sure   |  Posted: Mar 22, 2015  |  Ends: 9d, 15h  |   10 Proposals
Experienced landscape architecture designer is needed to take on various aspects of the presentation and planning for a winter event in a public park. Recreational architecture, visitor flow modeling, Graphic design skills are required. Please skip this job if you are: - unreliable or want to learn on the job Immediate availability. US applicants only
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: North America

m****lle
 [?]
Sign in to view client's details.
| m****lle
|    United States
Fixed Price: $120 - $240   |  Posted: Mar 22, 2015  |  Ends: 9d, 12h  |   15 Proposals
Hi, I need four machine designs. I need an automatic feeding system for a semi-dry powdery (+-15 mm chunks) mix into an tube of about 10cm diameter. This does not have to be mechanical, it can be gravitational, as long as the system works to feed the mix at a constant rate. The second is a conveyor belt integrated with an automatic slicer which will have to be coordinated with the extrusion speed or have a sensor to measure length before cutting. Here is an example video:   [obscured]  /watch?v=3noDf-CP7S0. The third machine is a mixer for heavy semi dry mix to be integrated onto a large boiler pot which stands on its own. The picture first picture "boiler to mixer" has the actual pot, and the idea of the integrated mixer. It should be able to detach and attach to another pot (of the same dimensions). Boiler - is the picture of the structure. The last Item is an addition to a blender system, where product (again semi dry) gets stuck on the edges and does not mix ...
Category: Mechanical       

D****eda
 [?]
Sign in to view client's details.
| D****eda
|    Canada
Fixed Price: Not Sure   |  Posted: Mar 22, 2015  |  Ends: 9d, 9h  |   8 Proposals
Hi, Looking for electronics engineer to build a PCB board. Requiring basic knowledge of electronic design, analog design, PCB design, PCB/schematics CADs, Bluetooth and I2C. Ability to design for best accuracy taking into account drifts/errors across the system. We are only considering folks in the San Francisco bay area or 50 miles our of the bay area. Please reach out to me if you are interested. regards, Mike
Category: Other - Engineering &...       
Preferred Location: United States

f****aii
 [?]
Sign in to view client's details.
| f****aii
|    United States
Fixed Price: Less than $500   |  Posted: Mar 22, 2015  |  Ends: 1d, 8h  |   14 Proposals
Hi, I need a concept design of an urban campground. I have a list of features that I want included and some ideas to be incorporated. This is a special design campground to be installed in a city. If you have been outdoors, especially camping, that experience will be helpful. Have you ever hiked hut to hut in Iceland or Switzerland? Have you ever hiked to a natural hot springs? Have you ever seen the hot springs that have been commercialized? Have you ever enjoyed a bonfire with a large group of friends? All these experiences will be helpful. Your design task will be to create a design that fosters a natural environment for socializing. The design will be crafted to block out the nearby neighborhood and busy streets. Features to include: parking entrance and exit path for cars waterfall wall along the busy road edge fire pits beer on tap stations bathrooms (design determines how many) sleeping huts (design determines how many) fence in the entire property or otherwise create nat...
Category: CAD       

b****999
 [?]
Sign in to view client's details.
| b****999
|    United States
Fixed Price: Not Sure   |  Posted: Mar 22, 2015  |  Ends: 9d, 8h  |   5 Proposals
Design A bra using fleece lining in the cup area. Offering women added insulation in the colder weather for their chest area.
Category: Product Design       

R****ams
 [?]
Sign in to view client's details.
| R****ams
|    United States
Fixed Price: $50 - $80   |  Posted: Mar 22, 2015  |  Ends: 9d, 5h  |   16 Proposals
We need phone case designs to be re-scaled and adjust to be suitable for 3D Printing. Should take no longer than 1-2 hours are the models are already complete. We just need the designer to have the models adjust to the appropriate scale to ensure that they will print and fit the phones correctly. Tight turnaround with a maximum of 1-2 days.
Category: Product Design       

T****ons
 [?]
Sign in to view client's details.
| T****ons
|    United States
Fixed Price: Less than $500   |  Posted: Mar 22, 2015  |  Ends: 9d, 4h  |   6 Proposals
I want to do some sketches of a computer module like a PCMCIA or something lke that, showing its slot in the laptop, desktop and tablets. Something like:   [obscured]  /search?q=pcmcia&newwindow=1&es_sm=93&source=lnms&tbm=isch&sa=X&ei=kTMMVajMFIGc7gb5oYHYAw&ved=0CAgQ_AUoAg&biw=1067&bih=714#imgdii=_&imgrc=f6iDYPDUHYYQmM%253A%3ButPR99D5fYHHXM%3Bhttp%253A%252F%252Fbixnet.net%252Fimages%252FPCMCIA-Insert-Notebook.jpg%3Bhttp%253A%252F%252F  [obscured]  %252F5gbpcmcihard.html%3B500%3B470 wouldlike basically top, side view and perspective of the sketches. If possible make about 3 different types of vertical takeoff drone sketches.
Category: Other - Engineering &...       

C****RED
 [?]
Sign in to view client's details.
| C****RED
|    United Kingdom
Fixed Price: Less than $500   |  Posted: Mar 22, 2015  |  Ends: 9d, 2h  |   27 Proposals
We have a new product we are developing. We need a one piece cover designed for the new product. The cover needs to follow basic mold rules. It needs to look like a hi-tech sports car. Nothing to radical just make it look good. Attached is a photo of the drive train. Its about 50mm long and 26mm wide. We can adjust some features of the drive train to accommodate the cover. An IGES files drive train will be provided.
Category: 3D Modelling       
Skills: 3D, Cover Design, Industrial Design, BASIC       

A****011
 [?]
Sign in to view client's details.
| A****011
Fixed Price: $500 - $1,000   |  Posted: Mar 22, 2015  |  Ends: 19h, 58m  |   11 Proposals
We are looking for a industrial/product designer who can assist in completing designs of a clipboard principally for field geologists and other outdoor occupations where clip boards are use extensivey in rough weather and environmental conditions. The product needs to be tough, capable of withstanding harsh environments and rough treatment. For that reason the clipboard needs to be very solid. Requirements include: The clip board when closed should be water tight/waterproof. There should be at least 10 pencil holders. The hinge should lock shut when closed, at 90o and at 180o. The corners should be slightly curved It should all be made of metal (stainless steel). If not a strong plastic. See through pocket with a waterproof zip for a quick reference map. Basic designs have already been sketch and on signing a NDA or accepting the job these can be sent to you. The design is not set in stone so suggested improvements would be beneficial. The end use of the designs needs to be comp...
Category: Product Design       
Preferred Location: North America, Western Europe, Eastern Europe, Eastern Asia, Australia/Oceania

a****son
 [?]
Sign in to view client's details.
| a****son
|    Australia
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Mar 22, 2015  |  Ends: 8d, 17h  |   23 Proposals
I need an architect to design a 2000sqft Building made out of shipping containers. Need complete drawing plans with construction plans. Shipping container size to use is 8ft x 20ft and or 8ft x 40ft. The building needs to have atleast 100mm insulation for weather proofing.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

s****ota
 [?]
Sign in to view client's details.
| s****ota
|    Canada
Fixed Price: $500 - $2,000   |  Posted: Mar 21, 2015  |  Ends: 9h, 24m  |   11 Proposals
We're looking to design a machine that can perforate a sheet of 7.5inch x 7.5inch into 900 squares of 1/4inch x 1/4inch each ! See pictures. We're looking for someone who can design the machine so we can start building it. My paper weight is 270.4g/m2 I want this machine to be electric with 120V outlet. Or I need a supplier or manufacturer who can build it for me.
Category: Product Design       

z****n89
 [?]
Sign in to view client's details.
| z****n89
|    Italy
Fixed Price: $1,000 - $5,000   |  Posted: Mar 21, 2015  |  Ends: 83d, 4h  |   13 Proposals
We are looking for someone that has experience building sensor planes and related electronics for cameras. Ideally you will have experience dealing with multi-sensor cameras and also multispectral cameras. It would be an added bonus if you have the experience to do this work end to end, from design to testing and production. Experience with data storage, handling and processing a bonus but not necessary. Please let us know your experience and rate when you apply. This job will be to create a working prototype of the sensor plane board, fpga and related basic image and data processing
Category: Other - Engineering &...       

s****me1
 [?]
Sign in to view client's details.
| s****me1
|    Canada
Fixed Price: Not Sure   |  Posted: Mar 21, 2015  |  Ends: 8d, 2h  |   51 Proposals
**Please note that I have a number of jobs like this coming up and would like to establish a solid working relationship with a designer for continued work if possible** THE JOB: I need the attached floor plans recreated as quality architectural plans for a design presentation. Included is a plan showing the site measure dimensions for accuracy. The objective of the presentation is to highlight the superiority of the 'proposed' design over the existing. As such I would like the 'existing' floorplan drawn up in a low-quality manner (still as an architectural designer would produce, but plainly presented), and in contrast I would like the 'proposed' plan drawn up in a high quality manner (as a high-end architect might produce) to look more sophisticated and refined in every way (line details, doors, furniture, etc. Both are to be in black and white. Please use different furniture for each floorplan. The plans do not have to be produced in CAD format, it's more about the graphic de...
Category: Architecture       
Skills: Architecture, Interior Design       

S****ons
 [?]
Sign in to view client's details.
| S****ons
|    United Kingdom
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job