Save this Search
     

All JobsManufacturing DesignFixed Price

 (182 results)  
Sort by:
  • Posted Date
Fixed Price
Fixed Price: Less than $500   |  Posted: 1h, 52m ago  |  Ends: 14d, 22h  |   1 Proposal
answer any two questions in options in attachment,5000 words, 2500 for each question with deadline 20th september
Category: Other - Engineering &...       

b****er9
 [?]
Sign in to view client's details.
| b****er9
|    United Kingdom
Fixed Price: Not Sure   |  Posted: 1h, 54m ago  |  Ends: 6d, 22h  |   9 Proposals
I need the 4 elevation drawings in 3D rendering of exterior which has a parking lot I will send to you an already completed AutoCad file when job is awarded I need a 1 story version (approx. 10,000 sf and a 2 story version approx 20,000sf I need highest quality with realistic visual.with Textures Need to include 4 modifications/revisions. Need your design ideas with realistic setting I need plants and trees in the rendering. Definitely the Exterior is brick and stone. I need you to provide me the source file in order to complete my work. Provide me your total cost for this job.
Category: 3D Modelling       
Skills: AutoCAD, 3GSM, AutoDesk Revit, Autodesk       

T****h31
 [?]
Sign in to view client's details.
| T****h31
|    United States
Fixed Price: Less than $500   |  Posted: 2h, 36m ago  |  Ends: 14d, 21h  |   3 Proposals
Please see attached images. We want a design to build something under our existing deck- using the 4 posts--current deck is 12-20 feet above grade. The posts under deck are 10' X16' rectangle-deck upper deck overhangs that. There is also another area that could be used next to the deck..under the porch. Will be used for kids between 6-18 years old. Think of something new an unique...outside the box....something crazy...something fun! Could have multiple levels, an enclosed "tree house", swings or rope lines, zip lines to ground, ladders to connect levels, fireman pole, rock climbing wall, slide, rope net... be creative! Would want to see very basic sketches before awarding to help decide. This is a FUN project...only fun people should bid. Bid should include concept sketches- and revisions...3D model renderings, and plans.
Category: Architecture       

J****erg
 [?]
Sign in to view client's details.
| J****erg
|    United States
Fixed Price: Not Sure   |  Posted: 5h, 32m ago  |  Ends: 14d, 18h  |   6 Proposals
Hello, We are looking for an experienced electronic engineer, who could develop a PCB ( schematics, routing and at least basic firmware ) for a camera, that would be using the OV13850 image sensor, save images/video to a micro SD card and/or transfer them via wifi. you are free to select a microprocessor or FPGA that you are most familiar with, as long as it is available, would be able to handle 13.5MP images/video and costs user 25$ or so. other requirements during future communication.
Category: Electrical       

C****mes
 [?]
Sign in to view client's details.
| C****mes
|    Latvia
Fixed Price: $100 - $200   |  Posted: 10h, 37m ago  |  Ends: 14d, 13h  |   5 Proposals
The objective is to design and fabricate one or several circuit board(s) capable of collecting multiple vital signs (ECG, SpO2, Temperature). The design can be a new design or one that is based on an existing reference design if the requirements can be met. If a reference design is used, schematics and demo software/firmware will be provided by the freelancer. The requirements are: - Capable of measuring ECG, pulse oximeter (SpO2), and temperature - Use an embedded 32-bit microprocessor with DSP functionality - Data collection of ECG and SpO2 must be simultaneous or with a low, deterministic latency (<1ms) between ECG/SpO2 samples - Sampling of ECG/SpO2 should occur at a rate higher than 100Hz with a good signal-to-noise ratio - Communication over USB/RS232 to a PC host - Onboard storage for at least 10 seconds of ECG/SpO2 data - Powered by a +5V DC power supply. Preferably a USB port. - A touch or infrared sensor for temperature - Firmware/software program demonstrating the ...
Category: Electrical       

m****sia
 [?]
Sign in to view client's details.
| m****sia
|    United States
Fixed Price: $500 - $1,000   |  Posted: 12h, 43m ago  |  Ends: 14d, 11h  |   1 Proposal
Hi, i am looking for some one who can help & design complete hardware to insert text into cctv video camera. Input : from POS system link shows exact final output.   [obscured]  /watch?v=wzkPFapw88A Thanks.
Category: Electrical       

1****in9
 [?]
Sign in to view client's details.
| 1****in9
|    United States
Fixed Price: Not Sure   |  Posted: 14h, 17m ago  |  Ends: 14d, 9h  |   3 Proposals
I need a complete camera case design that meets standard carry-on requirements of all airlines. General specs for carry on are 22x14x9 inches and 15#. This bag needs to safely and securely house a dji phantom 3 (including controller, charger and 2 batteries), a canon rebel t3i with a 17-40 mm lens, an 8-15 mm lens, a gopro camera and some accessories such as cables, gorillapod, feiyu wearable gimbal and battery charger. Drones are usually housed in dense foam and camera gear is usually housed in padded compartments but I cannot find a design that will house both with required specs. Example of drone storage:   [obscured]  /HPRC-HPRC2700WPHA3FO-Custom-Phantom-Black/dp/B00ZL3F2UY/ref=sr_1_1?ie=UTF8&qid=1441242471&sr=8-1&keywords=phantom+3+foam&pebp=1441242470657&perid=1HW0BBTQNFNBSJFA2MNG Example of camera storage;   [obscured]  /products/shootout-backpack-le-small-black.aspx Prefer ability to switch out camera gear as necessary; so prefer hou...
Category: Product Design       

r****a15
 [?]
Sign in to view client's details.
| r****a15
|    United States
Fixed Price: Less than $500   |  Posted: 14h, 25m ago  |  Ends: 14d, 9h  |   5 Proposals
I am looking for a person to get me a few quotes on a custom made metal piece that I use in my manufacturing. The metal piece will need a quote that includes shipping to Kansas City
Category: Contract Manufacturing       

M****les
 [?]
Sign in to view client's details.
| M****les
|    United States
Fixed Price: $25 - $75   |  Posted: 15h, 57m ago  |  Ends: 1d, 8h  |   8 Proposals
We are a spice manufacturer. Job Description: We are looking for someone with advanced experience working with Illustrator to take our logo and apply it to 2 different size labels to create new label designs with creative eye-catching effects. This should be a quick and simple project for someone with experience as we are providing you with our logo and the dimensions for our new labels. Label 1 7" x 3" Label 2 5 3/4" x 2 1/2" We would like to have at least 3 mock-ups submitted in phase 1 and we need to have final labels completed within 2 days of starting the project. Prefer, but not a requirement, someone that enjoys eating spicy foods. We need proofs to be sent in PDF format and final designs to be submitted in both PDF and Ai. Additional the designs must be in high resolution and print-ready format.
Category: Graphic Design       
Skills: Graphic Design, Adobe Illustrator CS6       

s****ike
 [?]
Sign in to view client's details.
| s****ike
|    United States
Fixed Price: $250 - $300   |  Posted: 16h, 19m ago  |  Ends: 2d, 7h  |   30 Proposals
Our current website does not meet our standards as in comparison to our competitors. Therefore, we want to update website in order to have a more optimized, exciting website that not only catches the attention of visitors but also converts them into buyers. A huge plus but not a requirement would be if you have a knowledge of or enjoy eating really spicy foods as your input will be valuable for the redesign of our website. We want to take our website to the next level and make it impressive! If this your forte then you might be person for this job. This is a link to our competitors website:   [obscured]  -pepper.com. We want our site   [obscured]   to be better and to be sophisticated and elegant with a Ghost Pepper theme. Please keep in mind that this could be the first of many more future projects, as we have over 20 other websites. We also want someone that is honest about their abilities, will guarantee their work, adhere to the agreed upon schedule, and stay in constant co...
Category: Website Design       
Skills: Adobe Air, CSS, HTML, PHP       

s****ike
 [?]
Sign in to view client's details.
| s****ike
|    United States
Fixed Price: Not Sure   |  Posted: 17h, 1m ago  |  Ends: 14d, 6h  |   7 Proposals
Looking for designer to bring my clothing apparel concepts to life as well as contribute to design improvements. Designer must be able to provide sketch and create prototype for manufacturing. Standard responsibilities will include, - creating/visualising an idea and producing a design by hand or using computer-aided design (CAD); - keeping up to date with emerging fashion trends as well as general trends relating to fabrics, colours and shapes; - developing a pattern that is cut and sewn into sample garments and supervising the creation of these, including fitting, detailing and adaptations; - assisting with the sourcing, selecting and buying fabrics, trims, fastenings and embellishments for Founder's approval
Category: Other - Design       

d****ute
 [?]
Sign in to view client's details.
| d****ute
|    United States
Fixed Price: Not Sure   |  Posted: 17h, 44m ago  |  Ends: 2d, 6h  |   0 Proposals
Hello, I wanted to know if you could help me. I'm designing a new product that needs an internal power generation. My research has steered me towards "disc type axial flux generators /motors". See attached sketch idea. Basically I need a test bed to prove theory I have based on the contrasts that are given. I can't fully describe the entire design but part of it needs to generate electricity and output it to a outlet, which kind of mimics a typical low voltage wall outlet performance you would find at a normal house. The initial device constraints was to have a cylinder can design with a max diameter of 3.5 -5 inches, and have the device be very light weight, and requiring very little force to spin the axial flux inside. I have not specified a height yet this is all a idea in testing phase. What I'm requesting is a design or instructions to create a test bed in my shop and so I can build and tested it, the shape and design are critical. This is a generator, I will ...
Category: Electrical       

m****478
 [?]
Sign in to view client's details.
| m****478 *
|    United States
Fixed Price: Not Sure   |  Posted: 21h, 5m ago  |  Ends: 14d, 2h  |   16 Proposals
I have an idea for a product, but can't seem to come up with the right design. I need the help of an expert to help complete the design. I will attach a list of what the product will have.
Category: Product Design       

t****093
 [?]
Sign in to view client's details.
| t****093 *
|    United States
Fixed Price: Not Sure   |  Posted: 21h, 29m ago  |  Ends: 14d, 2h  |   10 Proposals
Hello, I'm looking for mechanical engineering to join me on upcoming projects. Current project revolves around sheet metal housing. Only people with a strong portfolio will be considered. The ability to speak with me through SKYPE is a must. Thank you all for your time.
Category: Mechanical       
Preferred Location: North America

c****els
 [?]
Sign in to view client's details.
| c****els
|    United States
Fixed Price: Not Sure   |  Posted: 23h, 35m ago  |  Ends: 14d, 0h  |   8 Proposals
We are looking for a company to produce a TV (15 sec and 30 sec) Commercial that we can provide ready for the TV station. This commercial will have to be scripted/directed and edited. We are a software company looking to make a attention AD, we are not looking for a low quality AD. CG is a must for this AD. We will provide our Ideas and thoughts on how we want the AD to work but will embrace the creativity of the person or company. We are not going to set a Budget for this AD now as we need to see what is involved. This projected is FUNDED and ready to go without having additional approvals. We are picturing an AD that will be on location with actors possibly. Our History: We are a firearms software manufacturer that takes the complexity of purchasing a firearm from the current method of 1 hour and allows our APPS/ mobile and in store eKiosk to 35 seconds with greater safety for the buyer and the firearms retailer. We are looking to appeal these ADs to the consumer for faster chec...
Category: Videos       

r****508
 [?]
Sign in to view client's details.
| r****508
|    United States
Fixed Price: Not Sure   |  Posted: Sep 02, 2015  |  Ends: 13d, 20h  |   12 Proposals
I have qty4 picking system racks that will need to be designed complete with drawings and part lists. I would need these designs complete in 1 week after awarded the job. I would prefer the designs be constructed with Solidworks. Attached are detailed specifications on each application. I also can provide pictures of existing applications once awarded the job. I must stress that i must have all designs completed in 1 week once awarded.
Category: 3D Modelling       

B****W32
 [?]
Sign in to view client's details.
| B****W32
|    United States
Fixed Price: Less than $500   |  Posted: Sep 02, 2015  |  Ends: 13d, 18h  |   17 Proposals
6 rooms Interior design 1 shot per room Mood images will be provided through houzz.com It's a private villa home with a modern look I am an architect so your job will be easy
Category: Interior Design       
Skills: 3ds Max, Architecture, Interior Design       

H****zzi
 [?]
Sign in to view client's details.
| H****zzi
|    Saudi Arabia
Fixed Price: Less than $500   |  Posted: Sep 02, 2015  |  Ends: 13d, 12h  |   6 Proposals
I am looking for a manufacturer that can provide me with prototypes of an iPad case/strap made out of rubber/silicone. I have 3 professionally made 3d images bad on my design to provide you with. I can give approximate sizes but without knowing how soft or flexible the rubber/silicone material is i will need to rely on the manufacturers knowledge and help with their materials. Initially i would only be looking for 3 prototypes for the Kindle or iPad mini designs. Please contact me with an approximate price, time frame and any information you feel may be useful relating to the process.
Category: Product Design       
Skills: Manufacturing       

w****dia
 [?]
Sign in to view client's details.
| w****dia
|    Australia
Fixed Price: Not Sure   |  Posted: Sep 01, 2015  |  Ends: 1d, 11h  |   29 Proposals
I have a PCB that needs a redesign + improvement. It will need to be coded from scratch but it's a simple device. Looking for someone who can do it within 2 weeks as it's a priority job.
Category: Electrical       

t****gak
 [?]
Sign in to view client's details.
| t****gak
|    Australia
Fixed Price: $75 or less   |  Posted: Sep 01, 2015  |  Ends: 13d, 10h  |   16 Proposals
I have a design consisting of a metal and plastic part that is snapped together. I need an FEA analysis completed to determine the design will withstand 1,000 cycles given a set displacement of the ends. Model can be given in multiple formats. Native files are solidworks 2014. The assembly will have 2 components, one metal and one plastic. The parts are semi-circular in shape. NDA will be required.
Category: Mechanical       

t****eng
 [?]
Sign in to view client's details.
| t****eng
|    United States
Fixed Price: Less than $500   |  Posted: Sep 01, 2015  |  Ends: 13d, 9h  |   59 Proposals
We are a small start-up looking to work with people who I can build long-term relationships with. We decided to start outsourcing some activities we are doing with own resources, more detail will be showed by PM. We are looking for Mechanical engineers, Industrial designer and draftmen. Skills required: Autodesk Inventor - Solidwork - 3D studio - Alias. Knowledge and experience with mechanical drawings, technical drawing (2D), detailed plans, mechanical features. Render and animatons is a plus Please provide your best offer keeping in mind that this would be a regular ongoing volumen work coming your way. Please send me your resumen with a porfolio of your past work. Best regards
Category: CAD       

I****DMA
 [?]
Sign in to view client's details.
| I****DMA
|    Argentina
Fixed Price: Not Sure   |  Posted: Sep 01, 2015  |  Ends: 88d, 8h  |   10 Proposals
Hello we are looking for a person or company that has produced over a dozen to hundreds of shoe designs that can be 3D Printed. We want to get a couple dozen designs done but we need to find someone that has not only designed shoes but has also printed them out. Please email us photos of your designs and photos of them 3D Printed. You do not need to be an expert we are just having a very hard time finding people that have designed and 3D Printed the final design.
Category: 3D Modelling       

m****ttm
 [?]
Sign in to view client's details.
| m****ttm
|    United States
Fixed Price: Less than $500   |  Posted: Sep 01, 2015  |  Ends: 13d, 7h  |   14 Proposals
We need a Rc Plane designed. The plane needs to be very similar to this one   [obscured]  /hobbyking/store/__27132__Skywalker_X_8_FPV_UAV_Flying_Wing_2120mm_.html We need CNC DFX vector files as part of the design. Further details will be shared on contact.
Category: Product Design       

a****ski
 [?]
Sign in to view client's details.
| a****ski
|    Canada
Fixed Price: Not Sure   |  Posted: Sep 01, 2015  |  Ends: 13d, 7h  |   8 Proposals
Here is problem we are trying to solve... Issue We have multiple Medical Bluetooth devices that can interacts either on Browser directly or Android/iOS App Some cases user won't have any PC or Mobile device... Looking for Hardware solution Provide a off-the-shelf embedded system with Bluetooth 4.0/BLT 3G/4G wireless connectivity, some memory to run the application, there is no screen or user interface required... after configuration is done.. Our programming team will configure Android/Win App that will always look data from Bluetooth source... Good to have USB 2.0 support to connect external camera Device will be continuously running with power backup (in case power goes out or so) Android or Raspberry PI related configuration....... easy to buy in USA (but able to ship internationally) Product pricing Max $80 + pay monthly carrier fee for data plan I am just looking for commercially available product .. No software to design no custom hardware to design Product should...
Category: Other - Engineering &...       
Skills: Raspberry Pi, Android PC, Micro PC       

p****pro
 [?]
Sign in to view client's details.
| p****pro
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job