Save this Search
     

All JobsManufacturing DesignHourly

 (234 results)  
Sort by:
  • Posted Date
Hourly
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 2h, 27m ago  |  Ends: 14d, 20h  |   3 Proposals
Needing an engineer experienced in steel structures for a design of a generic steel structure for a high rise building. We are wanting to design a complete steel construction including the core using primary and secondary beam sections and a pour in place concrete flooring on steel forming sheets. FEA needed - a good understanding of current construction metholds.
Category: 3D Modelling       
Skills: 3D Modeling, 3D Design       

h****ley
 [?]
Sign in to view client's details.
| h****ley
|    Australia
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 3h, 27m ago  |  Ends: 14d, 19h  |   2 Proposals
I need a Project Manager to secure: raw material, parts, packaging, minor assembly, stickers, printed material and shipping of my product. This person must have direct access to all of these resources and wholesale / discounted prices. This is for athletic product.
Category: Contract Manufacturing       
Skills: Manufacturing Design, Manufacturing       

W****gns
 [?]
Sign in to view client's details.
| W****gns
|    United States
Hourly Rate: $70 - $95 / hr   |  Duration: 4-6 months  |  Posted: 3h, 51m ago  |  Ends: 70d, 17h  |   5 Proposals
We are looking for a Technical MS Dynamics NAV Project manager to join our 4 month project with possible extension. This is not a general purpose project manager role. This requires in-depth subject matter expertise with Microsoft Dynamics NAV implementations. This individual will need to be able to operate independently and have strong leadership skills. For this individual will be the primary driver and go-to point of contact for the direction of this project. If you are not up for this level of visibility please avoid this project. This requires someone who has lead the prior implementations of Microsoft Dynamics NAV from conception to completion. Any attempts to connect to the job poster through means beyond Elance will be ignored and automatically disqualify you as a candidate. Communicate only through Elance. The project will be with our customer who is mid sized global manufacturer and distributor of agricultural, industrial and construction related equipment. They are lo...
Category: Technical Project...       
Preferred Location: United States

c****les
 [?]
Sign in to view client's details.
| c****les
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 3-4 weeks  |  Posted: 4h, 32m ago  |  Ends: 14d, 18h  |   4 Proposals
PCB design. Hardware product design. C51 coding. Xmega AVR design and coding. ARM7 product design and coding. ARM9 product design. Linux system design.
Category: Electrical       

s****ong
 [?]
Sign in to view client's details.
| s****ong
|    Singapore
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 4h, 47m ago  |  Ends: 14d, 18h  |   5 Proposals
Hi, We are a company providing Procurement services located in HK, and for a current proposal we are looking for someone able to design in 3D a retractor (for earphones) on the basis of a simple sketch, and make sure that it is, from an engineering perspective, workable. Plus, for a convenient reason, we are looking for people located in Hong Kong, or mainland China. If we are satisfied, we might go to you for more prototypes. Here enclosed you will find a sketch about what we are looking for. Kindest regards
Category: 3D Modelling       
Skills: 3D, 3D Modeling, 3D Printing, 3D Design, 3D Rendering       

a****psa
 [?]
Sign in to view client's details.
| a****psa
|    Hong Kong SAR, PRC
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 5h, 25m ago  |  Ends: 14d, 17h  |   0 Proposals
Hi, We are a Procurement Services company located in HK and for a current proposal we are looking for someone able to design in 3D a retractor (for earphones) on the basis of a simple sketch, and make sure that it is, from an engineering perspective, workable. Plus, for a convenient reason, we are looking for people located in Hong Kong, or mainland China. If we are satisfied, we might go to you for more prototypes. Kindest regards
Category: 3D Modelling       
Skills: 3D, 3D Modeling, 3D Printing, 3D Design, 3D Rendering       

a****psa
 [?]
Sign in to view client's details.
| a****psa
|    Hong Kong SAR, PRC
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 6h, 34m ago  |  Ends: 2d, 17h  |   24 Proposals
Architect looking for drafting help Job Description: Looking for a proficient AutoCadd drafter to input hand sketches and drawings (plans and elevations of existing buildings) into the computer (via AutoCadd) - all 2D no 3D work. I have multiple small projects with quick deadlines.
Category: CAD       
Skills: 2D Design       

M****713
 [?]
Sign in to view client's details.
| M****713
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 6h, 36m ago  |  Ends: 14d, 16h  |   17 Proposals
Hello I would like a scaled layout drawn for a new restaurant. This will be done in two stages. First the initial floor plan and then restaurant equipment will be added at a second point a few days after. Looking for someone that is good with cad etc. Very easy to draw out. I have all the measurements, just need someone to draw it out in a cad program. I can send a pdf of the floor plan roughly sketched up. Thanks
Category: CAD       
Skills: 3D Modeling, AutoCAD, Manufacturing Design       

s****913
 [?]
Sign in to view client's details.
| s****913
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 6h, 50m ago  |  Ends: 14d, 16h  |   8 Proposals
I am looking for an automatic folding mechanism to be used in folding samosa pastry sheets into triangles with filling inside, to be compact, fast and reliable, I am looking at two options where filling and pastry can be inserted manually and the mechanism just needs to fold the sheets into triangles or a manual sheet insert with automatic filling and folding mechanism, if you feel you are able to produce this, please get in contact for further information.
Category: Mechanical       

m****iah
 [?]
Sign in to view client's details.
| m****iah
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 9h, 48m ago  |  Ends: 14d, 13h  |   0 Proposals
Need to Design a 30E EMOD ( ECiggrette) Need a designer who can Design the MOD
Category: Product Design       

p****166
 [?]
Sign in to view client's details.
| p****166
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 10h, 3m ago  |  Ends: 14d, 12h  |   16 Proposals
We have a PDF retail price guide from a manufacturer we represent. We need to be able to input our pricing into the PDF form, currently it shows the MSRP which we round off when we sell the products. End product should be an editable PDF that has a blank price column that we can easily enter our pricing into.
Category: Other - Design       
Skills: Graphic Design, Adobe Photoshop, Web Design       

s****210
 [?]
Sign in to view client's details.
| s****210
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 10h, 27m ago  |  Ends: 6d, 12h  |   6 Proposals
I manufacture my own product called a Swipe and I am looking for a nice brochure (both digital and print) to distribute to people who inquire about it. Swipe is a single-use deodorant wipe. You can visit my website at   [obscured]   to get a better idea of what it is and what it looks like. I want the brochure to include things like: how and when to use, benefits, ingredients, pricing for both retail and wholesale, etc...
Category: Brochures       
Preferred Location: United States

S****-it
 [?]
Sign in to view client's details.
| S****-it
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 3-4 weeks  |  Posted: 11h, 4m ago  |  Ends: 12h, 55m  |   12 Proposals
This is a repost. Please reply again if you're interested. We are in need of a 3D designer who can also 3D print alpha prototypes. We are a small technology start-up designing for the enormous energy industry. The work must be kept strictly confidential. Deliverables we need will be specifications documented, 3D model design, 3D printing of alpha and beta prototypes. This job will be ongoing as we design, print prototype, field test, redesign for improvements and finally working to production ready prototype. We need three distinct prototypes designed and printed. 1. a simple cylinder (several sizes) Max diameter 3", max height 5" 2. an air-tight, donut-like shape, that can open/close. Max diameter 7" 3. A mounting 'bracket' to attach technology to end of cylindrical tube. Max diameter 5", max height 5" ( estimated ) I look forward to your response! Thank you.
Category: 3D Modelling       
Skills: 3D, 3D Printing       
Preferred Location: North America

j****ton
 [?]
Sign in to view client's details.
| j****ton
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 11h, 28m ago  |  Ends: 14d, 11h  |   9 Proposals
We are looking to create a rubber surf fin. We have tested endless models and we are now to a point where we would like to create our own fin. I have attached a photo of the rough concept of our end product. Let me know if you would be interested.
Category: Other - Engineering &...       

m****all
 [?]
Sign in to view client's details.
| m****all
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 12h, 4m ago  |  Ends: 14d, 10h  |   6 Proposals
I need a circuit designed using TJA1054AT Transceiver and a MC with built in Can controller or separate CAN controller and MC. I would prefer MC to be PIC, Arduino, or AVR based. I would also like a C program created that would control this CAN bus running at common BUS rates but 83.3k must also be supported. I want to be able to add my own messages to the C code. I need this to be easy to understand and implement. As an example MSG1(ID, DLC, DATA bytes 0-7, Cyclic rate). Please respond with quote for this. I am looking at the end of March to start this project.
Category: Other - Engineering &...       
Skills: Electrical Engineering, C, Electronics       

P****L76
 [?]
Sign in to view client's details.
| P****L76
|    United States
Hourly Rate: More than $50 / hr   |  Duration: 1-2 weeks  |  Posted: 12h, 46m ago  |  Ends: 14d, 10h  |   10 Proposals
I have questions about a project that is in the concept phase and I need advice about the direction I need to take and what would be involved with the electronic development.
Category: Electrical       

J****b42
 [?]
Sign in to view client's details.
| J****b42 *
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: 15h, 11m ago  |  Ends: 14d, 7h  |   3 Proposals
Clickey is a key organizer that hold up to 6 keys . made from leather and stainless steel . i need a design and prototype for the lock mechanism that has also light in it . the picture attached is very similar to the idea but different lock mechanism , which is needed with a light . thanks
Category: 3D Modelling       

h****nho
 [?]
Sign in to view client's details.
| h****nho
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: 16h, 41m ago  |  Ends: 14d, 6h  |   7 Proposals
Need a machinist to develop a custom air nozzle for low pressure - low velocity air. The nozzle is large - smallest diameter will be 10mm and the largest approximately 40mm . for prototypes the nozzle can be made out of any material. Paper, wood, metal are all ok. You will make several different shapes and size of nozzle then blow air through the nozzle. The air will carry small bits of paper or sawdust so we can visualize the air flow. You will take photos of the different nozzles recording the pattern of particle distribution and send them to me. I will give you feedback and we will continue trial and error to develop the right size and shape of nozzle.
Category: Mechanical       

1****sky
 [?]
Sign in to view client's details.
| 1****sky
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 18h, 7m ago  |  Ends: 6d, 4h  |   3 Proposals
Looking for a creative futuristic mind to create a 3D concept model of a strength scale- it will measure the strength of the world's strongest man and maybe a few superheros. In fact, I was thinking of it having sort of a batman feel ] I admire your work, hopefully we can work together. Notably, my project deadline is March 21st. Please send me a reply of your fee schedule at your earliest opportunity ready to work. This is my first time using elance. I hope that you are available to assist in the execution of this cutting edge invention.
Category: Product Design       
Skills: 3D Design       

A****sir
 [?]
Sign in to view client's details.
| A****sir
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 20h, 30m ago  |  Ends: 14d, 2h  |   34 Proposals
I looking for an Autodesk AutoCAD Drafting Professional that can assist me in setting up structural engineering plans. It would mainly consist of taking the Architectural or design plans and converting them into a structural set using my CAD standards which I would provide. You would change all their CAD layers to mine and I would provide initial markups of where lateral and gravity elements would need to be. For example: A typical plan would have roof framing showing and upper walls and shearwalls. I would also like to have standard details cut and I would provide markups for that also. I may give hand drafted sketches of details that I would like drafting to CAD as well. Also, a working knowledge of creating AutoCAD dynamic blocks would be a plus. I have several ideas but don't have the time to get them made. Experience in structural engineering drafting is not required but would be a plus also. I would like to use dropbox to share items back and forth for the most part. May...
Category: CAD       
Skills: AutoCAD, Drafting       

j****216
 [?]
Sign in to view client's details.
| j****216
|    United States
Hourly Rate: $30 - $40 / hr   |  Duration: Not Sure  |  Posted: Mar 04, 2015  |  Ends: 13d, 22h  |   1 Proposal
Service Engineer Description · Engineer is expected to carry out preventive maintenance / corrective / emergency maintenance visits at customer sites on DCS/PLC/SCADA systems · Preventive Maintenance ? Cleaning, Backup, Modification, Report Submission of existing running system. · Corrective Maintenance ? Restoring the system from any faults in the system · Shutdown Maintenance · Logistics Management ? Individual should carry the material for restoring the problem at site. Material IN and Material Out at customer premises with proper documentation. · PC troubleshooting and Networking · Documentation ? 40 % documentation is involved · Special Tasks · Knowledge of DCS and PLC with a hands-on experience. · Matured skills in independent troubleshooting / problem resolution on these platforms. · Understand customer needs & extend Service Support at site / remote for prompt issue closure ensuring adherence to Honeywell Process and Quality matrices. · Build, Develop & Sustain Customer...
Category: Mechanical       

r****978
 [?]
Sign in to view client's details.
| r****978
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 04, 2015  |  Ends: 13d, 22h  |   2 Proposals
I need good BIM engineer to design a demonstration model of a multi-story building with different Intelligent building functions taking place on each floor. The whole building is networked back to one point and then to the cloud. For example the first floor may have intelligent lighting with Dali and KNX control, the 2nd floor may have electronic blind control on the windows, the 3rd floor may have all electrical circuits monitored for power consumption, the 4th floor may have BMS controls that are interfaced to our system ..... and so on. Full specification will be written but its essential that the engineer doing this has good graphics skills and understands electrical systems.
Category: Electrical       

M****VAC
 [?]
Sign in to view client's details.
| M****VAC
|    Ireland
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 03, 2015  |  Ends: 26d, 17h  |   6 Proposals
Our next module requirement is a 45x55mm SMT modem board for the Huawei HU-509 series module in a 145 pin LGA configuration. Modem on top 5x2 2mm pitch Male header, Battery and SIM socket on bottom Pin assignments on header at your discretion. Signals required: RX TX VCC 5VDC Gnd Reset PWR_ON GPIO (x2) Antenna socket on either top or bottom MUST provide power regulation to recommended 3.7V on board. VCC provided is 5VDC No Mic, Spkr, Display or other Telematics, this is a data only application
Category: CAD       

c****ien
 [?]
Sign in to view client's details.
| c****ien
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 03, 2015  |  Ends: 13d, 15h  |   42 Proposals
Hi, I'm looking at getting a Logo made up for a potential business. It will be an online business. Name of the business will be Timber Clouds and will be a business that manufactures and sells timber storage units for vaping. If unsure about vaping please have a look. Would like to incorporate vaping into the logo, as well as the timber element. Happy to answer any follow up questions. Thank you!
Category: Logos       

v****pal
 [?]
Sign in to view client's details.
| v****pal
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 03, 2015  |  Ends: 13d, 12h  |   9 Proposals
We are Looking for a photometrics simulation rendering We have project 50ft x 50ft warehouse with a 16ft ceiling. We are looking to see how many lights we need to get an average illumination of 70 foot candles across the floor We will provide the IES file for the light fixtures
Category: Other - Engineering &...       
Skills: Industrial Design, agi32, dialux, photometrics       

M****man
 [?]
Sign in to view client's details.
| M****man
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job