Save this Search
     

All JobsManufacturing Design

 536 results  
Sort by:
  • Posted Date
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 23, 2014  |  Ends: 13d, 23h  |   4 Proposals
I need an elastomer rubber stop watch design. It will need specific count down times. Over all it is a very simple design and is not performing any additional function that is not readily available. I will need the function and the product designed.
Category: Product Design       

B****ise
 [?]
Sign in to view client's details.
| B****ise
|    United States
Fixed Price: Less than $500   |  Posted: Apr 23, 2014  |  Ends: 13d, 23h  |   8 Proposals
So the other freelancer I hired has disappeared, and had orginally agreed to design the electrical components for the unit at 200, and I would like to stay in that range. I do need a really fast turn around on this design. 11pin micro usb charging, hdmi audio output, rca out puts, bluetooth integration, and the 3d design is already done. Please help me out. Thanks.
Category: Electrical       

k****ted
 [?]
Sign in to view client's details.
| k****ted
|    United States
Fixed Price: $600 - $800   |  Posted: Apr 23, 2014  |  Ends: 22h, 51m  |   8 Proposals
I need an experienced architect or house designer with good knowledge of CAD to complete a set of house plans that I have started. I already have the following in CAD files which are nearly complete and I can provide you with the files: Site Plan Foundation Plan Roof Plans Floor Plans Elevations I'm looking for a US based architect or designer who is knowledgeable with IRC and IBC and who can provide relevant codes on the the plans and who can put together a complete set of plans that is ready to submit for a permit. Since a lot of the work has already been completed, I'm looking to complete this job within 7-10 days at the most. You should be available online daily for communication and to answer questions. I do not work with any kind of upfront payment so if that is your requirement, this job is not for you.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       

t****079
 [?]
Sign in to view client's details.
| t****079 *
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Apr 23, 2014  |  Ends: 13d, 22h  |   9 Proposals
We are looking for complete quantity take-offs for millwork, Cabinets, Trim and woodwork from the detailed plans.
Category: Architecture       
Skills: Architecture, AutoCAD, Interior Design       

s****jay
 [?]
Sign in to view client's details.
| s****jay
|    United States
Fixed Price: $600 - $800   |  Posted: Apr 23, 2014  |  Ends: 13d, 22h  |   1 Proposal
I need an experienced architect or house designer with good knowledge of CAD to complete a set of house plans that I have started. I already have the following in CAD files which are nearly complete and I can provide you with the files: Site Plan Foundation Plan Roof Plans Floor Plans Elevations I'm looking for a US based architect or designer who is knowledgeable with IRC and IBC and who can provide relevant codes on the the plans and who can put together a complete set of plans that is ready to submit for a permit. Since a lot of the work has already been completed, I'm looking to complete this job within 7-10 days at the most. You should be available online daily for communication and to answer questions. I do not work with any kind of upfront payment so if that is your requirement, this job is not for you.
Category: Architecture       

t****079
 [?]
Sign in to view client's details.
| t****079 *
|    United States
Hourly Rate: $40 - $50 / hr   |  Duration: Not Sure  |  Posted: Apr 23, 2014  |  Ends: 13d, 22h  |   0 Proposals
Expert at 3ds Max Design 2014 to consult with issues in transferring Civil 3D to 3Ds Max and with animation. Must be willing to teach others over the phone.
Category: 3D Modelling       

L****gns
 [?]
Sign in to view client's details.
| L****gns
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Apr 23, 2014  |  Ends: 13d, 21h  |   7 Proposals
I am creating a ring like device and need to determine the correct electrical components (size, type, and power requirements). I am looking for someone who can identify the correct components and create a workable model that I can put into a wearable technology gadget.
Category: Electrical       

o****n01
 [?]
Sign in to view client's details.
| o****n01
|    United States
Fixed Price: Less than $500   |  Posted: Apr 23, 2014  |  Ends: 13d, 21h  |   1 Proposal
I would like a website and SEO for my solar company. I'd like all the social media links in site. Site will most likely include the following pages: Home, About Solar, Contact us, request a quote, products and services offered. Simple, clean and easy to navigate. Thank you, Allan
Category: Other - Engineering &...       

a****zak
 [?]
Sign in to view client's details.
| a****zak
|    United States
Fixed Price: Not Sure   |  Posted: Apr 23, 2014  |  Ends: 5d, 20h  |   11 Proposals
Deliverable is a manufacturing-ready design for CNC machining. Design features include cost minimization, rugged environment , compact size, material tradeoffs. 4 week schedule needed. Pictures and a video conference description of an existing functional prototype is provided as a starting point. We are looking for you to take this prototype and use your design experience and creativity to propose a full housing configuration. The first payment milestone would be our approval of the first conceptual design Final milestone and deliverable would be a machining ready design that includes the Solidworks part files.
Category: Product Design       

L****man
 [?]
Sign in to view client's details.
| L****man
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 23, 2014  |  Ends: 13d, 19h  |   7 Proposals
We are looking for an individual or company to help us revamp our current collateral and online marketing materials and strategy. Some of the items we would need to cover are: 1. Launching a new superior product against an entrenched competitor. 2. Targeting and Speaking the language of engineers. 3. Targeting end users Municipalities, etc. 4. Targeting General Contractors 5. Preparing specs 6. Preparing Letters of Introduction 7. Preparing brochures. 8. Preparing display material for exhibitions. 9. Design follow-up system to track impact. 10. We don't want just fliers and the conventional way of marketing - we need something totally different! 11. Need impact packages to give to dealers for our products as well as major international companies. You would be working with the CEO and marketing manager throughout the project. Please review our website at   [obscured]   to see our line of products. We would be focusing on our bolted tanks and field welded tanks.
Category: Ad Campaigns       
Preferred Location: United States

u****ind
 [?]
Sign in to view client's details.
| u****ind
|    United States
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: Apr 23, 2014  |  Ends: 13d, 19h  |   3 Proposals
Please read thoroughly before applying. I am looking firstly for a consultant/sourcing person. Hi there, I am currently looking to source/create my own vitamin brand, the brand would have capsules containing multiple different chemicals e.g. vitamin c + zinc. It is important that the manufacturer is able to combine multiple chemicals together into a single product. Perhaps the chemicals will come from another factory, and the packaging happening somewhere else - need bottles with labels as well as capsule/pill manufacturing. (This is the main part) I already have sources and contacts for some of the supplements and chemicals I am looking for. I am looking someone trustworthy specifically able to source these cheaply in China, or any other country that can provide quality for value such as the United States, New Zealand etc. What I am looking for is somebody who can communicate, preferably in Chinese with people in China, or is based in whatever country they are working in. I am l...
Category: Product Design       

C****ion
 [?]
Sign in to view client's details.
| C****ion
|    Hong Kong SAR, PRC
Fixed Price: $5,000 - $10,000   |  Posted: Apr 23, 2014  |  Ends: 13d, 19h  |   0 Proposals
I would like to hire 50 License home inspector that will inspect old and new home along with commercial property, on the other side of our business we will have Home improvement and installation, with the Renewal solar energy saving window and doors along with LED lighting and hot water heaters, that our customers will be able to part take in with help of the government. Once the customer become energy efficient they are able to save on their electret bill. Which our company will be able to install these products in both old homes and commercial property. We will also take part in recycling. But most of all we would like to manufacture our own product, such as Renewable solar energy saving and hurricane impact window and door in the south Florida area. My vision is to be able to hire blue collar workers and bring some of the labors jobs back to the( USA-home) from overseas, not only do I want to create good jobs but lasting careers.
Category: Grant Writing       

S****e45
 [?]
Sign in to view client's details.
| S****e45
|    United States
Fixed Price: $150 - $250   |  Posted: Apr 23, 2014  |  Ends: 13d, 18h  |   3 Proposals
I'm in need of an experienced Landscape Designer to a complete a set of landscape land which includes Lighting, Irrigation and drainage plans.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

t****079
 [?]
Sign in to view client's details.
| t****079 *
|    United States
Fixed Price: $500 - $1,000   |  Posted: Apr 23, 2014  |  Ends: 13d, 18h  |   1 Proposal
We need a manufacturer of mens underwear. We prefer that they be made from a 98% cotton and 2% spandex material. Expect 100-500 pieces total (4 different colors, sizes S-XXL). This job post covers the manufacture and delivery of 4 samples pcs only (2 briefs and 2 boxer briefs) and could be awarded to several manufacturers. Here's what is ultimately needed: On the front waistband, we need the logo embroidered in gold thread. We need logo tags with sizing on the back. Please respond with an approximate (non-binding) price for 100-500 pcs and a binding price for 4 sample pcs shipped to Pennsylvania. Don't hesitate to contact us with questions or details. Thank you for your consideration.
Category: Product Design       

S****uie
 [?]
Sign in to view client's details.
| S****uie
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Apr 23, 2014  |  Ends: 13d, 18h  |   10 Proposals
Need quote for a 14 gauge 316 L Stainless Steel ring. Usage 10,000 pcs, 1000 at a time or more. Price needs to be 0.50 US or so. USA Mnfg is best but Offshore will be considered. See attached file
Category: Mechanical       

N****ore
 [?]
Sign in to view client's details.
| N****ore
|    United States
Fixed Price: $100 or less   |  Posted: Apr 23, 2014  |  Ends: 13d, 18h  |   7 Proposals
I need someone to create an accurate 3D model of this room (PICTURE ATTACHED) no textures needed just a 3DsMAX, Sketch Up or Rhino Model with objects separated into groups or layers Job Description: Im working on an interior design project but don't have the time to spend on this particular piece so I'm willing to share the wealth :) let me know if you're interested and how much you'd charge. best offer wins :) Thanks
Category: 3D Modelling       
Skills: 3D, 3D Modeling, Architectural       

G****nes
 [?]
Sign in to view client's details.
| G****nes
|    United States
Fixed Price: Not Sure   |  Posted: Apr 23, 2014  |  Ends: 13d, 17h  |   0 Proposals
A home care ear wax removal product that provides a user to both self-examine their ears for ear wax by use of the products patented self-exam otoscope features while they remove the ear wax with designed specula tips that effectively remove the ear wax from the ears. (The Cad work would include the otoscope, the modified specula tip designs, and a specula tip cleaning brush) I would prefer a manufacturer , if kinown, that could take the CAD work forward with the production of some initial trial run of units that are packaged and ready for retail distribution.
Category: 3D Modelling       

W****ag1
 [?]
Sign in to view client's details.
| W****ag1 *
|    United States
Hourly Rate: $40 - $50 / hr   |  Duration: 4-6 months  |  Posted: Apr 23, 2014  |  Ends: 13d, 17h  |   4 Proposals
Hi I am looking a consultant, who can provide quick guidance or answering doubts in RF & microwave & PLL field. it should not really take up your time if you work in this field. Mainly it is for guidance.
Category: Electrical       

j****mes
 [?]
Sign in to view client's details.
| j****mes
|    United States
Fixed Price: $90 - $140   |  Posted: Apr 23, 2014  |  Ends: 1d, 17h  |   4 Proposals
I'm in need of a CAD designer or anyone with experience who can provide a gas piping and electrical plans with load calculations (USA). I will provide Floor plans in CAD
Category: Electrical       
Skills: AutoCAD, Electrical Engineering, Electronics       

t****079
 [?]
Sign in to view client's details.
| t****079 *
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Apr 23, 2014  |  Ends: 13d, 16h  |   6 Proposals
Catia V5-Part design Assembly design DMU Kinematics Drafting Wireframe and surface design AutoCAD
Category: 3D Modelling       

S****c86
 [?]
Sign in to view client's details.
| S****c86
|    Serbia
Fixed Price: Not Sure   |  Posted: Apr 23, 2014  |  Ends: 5d, 16h  |   5 Proposals
Needing a writer to contribute ongoing weekly blogs and possibly ebooks for a product design, development, and manufacturing firm. Experience in this industry preferred. Blogs: 2-3 blogs per week, approx. 400 words. Some topics will be provided but as writers become more familiar with the client, I will rely on them more for providing topic suggestions. Ebooks: As needed, anywhere from 1000-2000 words.
Category: E-books and Blogs       

t****hot
 [?]
Sign in to view client's details.
| t****hot
|    United States
Hourly Rate: $20 - $50 / hr   |  Duration: 1-2 weeks  |  Posted: Apr 23, 2014  |  Ends: 28d, 16h  |   17 Proposals
K6 is a specialist Industrial Design consultancy and we are looking to add to the sub-contractors we work with. Presently we need additional support in electronic design and manufacture which is quite a broad heading. An example of a typical project might be an embedded system, connected to the outside world via a 3G modem (module designed onto a custom pcb), a number of IO lines running bespoke software. These solutions form part of complete products that we design and then manufacture in small volumes. If you would like to work with us, let us know and we will send you a brief for our next project. Please ignore the payment range - I had to enter something!
Category: Electrical       
Preferred Location: United Kingdom

g****k70
 [?]
Sign in to view client's details.
| g****k70
|    United Kingdom
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job