Save this Search
     
Sort by:
  • Posted Date
Time Left: Less than 7 days
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 03, 2015  |  Ends: 1d, 0h  |   8 Proposals
The goal of this project will be to update a design of a PCBA for a 2500 mAh LiPo single battery power bank. PCBA specifications: Hi, we have not found a part number of the main IC. We are now choosing a provider to update this design to a new IC. We'd like the resulting design: - to reuse as much as possible from the existing design - to fully comply with this list of requirements: 1. Input: DC5V 1A, so that battery charges at 1Amp rate 2. Outputs: two independent outputs, DC5V 1A. Connection of an external device to one output automatically blocks the other output. 3. Built-in protections for input and outputs: 3.1. overvoltage 3.2. overcurrent 3.3. short circuit 4. Built-in protections for battery: 4.1. Overcharge 4.2. Overdischarge 4.3. Overcurrent 4.4. Overheating 5. Battery charging/discharging: standard 3.7V LiPo battery charging cycle, 2500 mAh battery (we will provide the samples) 6. Simple shake sensor: activates LED indication. Example:   [obscured]  /Electron...
Category: Electrical       
Preferred Location: North America, Western Europe, Eastern Europe, Eastern Asia

a****kov
 [?]
Sign in to view client's details.
| a****kov
|    United States
Fixed Price: Less than $500   |  Posted: Jul 02, 2015  |  Ends: 4d, 12h  |   19 Proposals
End product should be a high-resolution and photo-realistic 3D rendering of back wall and floor with fireplace, mantel, wood/fire in fireplace. A very simple rendering but must look like it was photographed and similar to the attached sample but without the tree, no rug, no furniture, no stockings, no floral/garland, no vases, no chalkboard, no ceiling (have wall extent to the top, left and right)...simply floor, wall, mantel with fire screen, wood and fire. I'd like the ability to have a variety of revisions to get to the final product but to start, replicating the scene as I've described above and shown in the attached is step 1. If this process looks great, there are other opportunities to do more work and add in other elements. Please only submit bids if you are able to pull off renderings that look realistic, like we photographed the room and didn't render it.
Category: 3D Modelling       
Skills: 3D Modeling, 3D Design, 3D Rendering       

j****407
 [?]
Sign in to view client's details.
| j****407
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Jul 02, 2015  |  Ends: 4d, 12h  |   7 Proposals
We are looking for a talented FPGA programmer to help us implement a low noise (<10nV/(rootHz)) lock-in amplifier for heterodyne detection of sideband signals. Carrier frequencies range from 0.3 to 1.5MHz. The lock-in amplifier must have the ability to generate signals at specified frequencies and demodulate signals at the sum or difference of two frequencies (FM/heterodyne detection). Your job will be to develop a working prototype that does the following: 1) Takes in signals via a high speed, 16bit ADC 2) Generates a sine wave with programmable amplitude (ranging from 0 to 5V) and frequency, f2 = (1 to 1000Hz) 3) Demodulates the signals at two frequencies f1+f2, f1+2f2. f1 is determined from the DAC input. f2 is the frequency generated in step #2. 4) Outputs the RMS amplitude of the two demodulated signals via a low noise, 16bit DAC. We have an ADC and FPGA eval board already chosen, part #'s AD9268 and HSC-ADC-EVALCZ from Analog. You will need to help us choose the DAC and fi...
Category: Electrical       

N****lIR
 [?]
Sign in to view client's details.
| N****lIR
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: Jul 02, 2015  |  Ends: 4d, 3h  |   25 Proposals
We seek an experienced blog writer preferably with experience writing professional articles for the car, motorcycle, and truck industry to attract visitors to our site. We are a professional company that specializes in the manufacturing of custom auto parts, complete service from design to dispatch. Please visit our site to learn more about what we can make and what articles you might write,   [obscured]   I anticipate this being long time business arrangement and look forward to hearing from you, there should be 50 pcs blog with 500 words might write in 6 monthes.
Category: Article Writing       

b****ian
 [?]
Sign in to view client's details.
| b****ian
|    China
Hourly Rate: $40 - $50 / hr   |  Duration: Not Sure  |  Posted: Jul 02, 2015  |  Ends: 3d, 23h  |   27 Proposals
Wanted organized detail oriented Solidworks injection molded parts expert Hello, I am working on a new Solidworks project and I need to make some adjustment to already existing files. I am looking for someone who is super positive and has a can do attitude. You need to be super familiar with Solidworks and designing plastic injection molded parts for manufacturing. You must be able to work in fast paced environment. You must have experience with creating gasket over molds. You must be very familiar with the plastic injection molding process. Have some knowledge in creating bump-offs, living hinges and creating mirror image parts. You must be willing to meet in person in Tucson and be available ASAP. The main components of the work will be: creating a living hinge editing existing plastic hinges designing new parts Please send me an email and include the following: Previous projects you have created What the responsibilities were Who your boss was Along with what each...
Category: Product Design       

A****as1
 [?]
Sign in to view client's details.
| A****as1
|    United States
Fixed Price: $20 - $75   |  Posted: Jun 29, 2015  |  Ends: 1d, 11h  |   8 Proposals
I am looking for a complete design of a mobile Espresso Bar. After your design the carpenter will build the final product. WORK - PRODUCT A Mobile Espresso Bar (see attached pictures) Basis of the mobile espresso bar should be 1. a 1260x790mm kitchen island and needs to be adapted to it needs (for example an ikea stenstorp kitchen island). OR 2. Draw an own model This semifinished product has to be finished to a Mobile Espresso Bar. It should provide space for: Above Countertop :: Coffee Mashine (600x600x700mm (Width/Depth/Height)) :: Grinder :: Countertop Lid, straw and Condiment Organizers :: All kind of holes for supply (electric, water, waste etc) :: Refridgerator for cold drinks and/or take away cake/sandwiches smoothies :: a space where a customer can prepare his coffee, example to finish with sugar, stir and put a top on the cup. :: A space where the customer can drink the coffee. Can be made with one of the sideparts (see closing) :: any input or ideas will be great Belo...
Category: CAD       
Skills: 3D, 3D Modeling, AutoCAD, Manufacturing Design       

w****nfo
 [?]
Sign in to view client's details.
| w****nfo
|    Austria
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 28, 2015  |  Ends: 16h, 54m  |   56 Proposals
I need someone to take my "technical" drawings, specifications, and ideas and turn them into CAD drawings that I can submit for prototyping and manufacturing. I've provided 85% of what is needed, I just lack the skill to get that last 15% done. There will be some assistance needed from you to determine fabrication material and tolerances. Currently, I have 8 drawings showing every component of the device and can work daily with you on any questions or specifics you need from me to complete the project. I would prefer someone to provide an hourly rate bid then we can discuss how many hours you will need to complete once you have had a chance to review the drawings and the scope of the project. I'm mechanically inclined, and have taken some engineering courses so I'll be able to partner with you until we get it right. If all goes well, future work can be awarded to you on a project by project basis. While timelines are fluctuating, I'd like to get the project started b...
Category: CAD       
Skills: AutoCAD, Manufacturing Design       

K****nis
 [?]
Sign in to view client's details.
| K****nis
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 28, 2015  |  Ends: 14h, 0m  |   4 Proposals
We are an international Point of Purchase Display company looking for a designer to fulfill on a project we have on hand. The designer has to be familiar with the different material used in both permanent and temporary display. Temporary: Litho print .003 to .048 and mount to corrugated and/or chip utilizing UV litho 40" up to 81" in 6/c with large format digital and large format silk screen supported by complete bindery and high speed POP display finishing. Permanent: Fabrication in acrylic, wood, wire, metal, and fixtures along with high speed vacuum forming and injection molding (500 ton). Attached are two rendering concept which we need to turn into structural drawing for manufacturing. Please reply back with an estimated quote. Thank you!
Category: Other - Engineering &...       

d****ter
 [?]
Sign in to view client's details.
| d****ter *
|    United States
Fixed Price: Less than $500   |  Posted: Jun 28, 2015  |  Ends: 10h, 25m  |   11 Proposals
I would like for someone to design an apparatus that would attach to a squat rack with a J-hook attachment and remain very stable once in place. Essentially the device will be built off of a J -hook. see photo of the J hook attached. The apparatus should have two pads 24 inches long with a diameter of 6 inches, that would support the legs of the person doing the handstand to help them regain balance without needing to return their feet the ground, each time balance is lost. The key feature of the apparatus would be a mechanism that would allow one of the pads to be positioned directly above the other (in the start position) and rotate safely(smoothly with no loud noises) around the feet of the person doing the handstand once they "kick up" into position. This rotational movement of the top pad would be activated by the pressure of the (heels of calfs)hitting the primary support pad. Once this rotation has a occurred, the apparatus would provide support on both sides. Ide...
Category: Product Design       
Skills: Manufacturing Design, Product Design       
Preferred Location: North America

k****ken
 [?]
Sign in to view client's details.
| k****ken
|    Canada
Fixed Price: $20 - $100   |  Posted: Jun 26, 2015  |  Ends: 6d, 18h  |   19 Proposals
I am looking for an Honest and ethical Engineer with an experience to design a simple small home with the following dimensions and requirements. I know my budget is low but please I request if you cannot do the project per the set budget and the time don't bother to bid and ask me for more money later. This is not an hourly rate job. it is a flat rate. and if you do a good job I will give you a good rating. Dimensions 1- the house is 1200ft (30ft X40ft) 2-three story concrete floor 3-First floor ( ground floor) has one bedroom with bathroom, a garage, kitchen dining room and living room and a common bathroom 4- second floor has four rooms with one bathroom 5-third floor same as second floor house Is made of a bricks and has suspended concrete slab Requirement: need a complete plan with quantity calculations structural calculations of the slab, columns, and beams 3D modelling plan 1.Footing details, 2.Grade beam details. 3.Column details 4.Beam details 5.Slab details. 6.Etabs analys...
Category: Civil & Structural       

J****mac
 [?]
Sign in to view client's details.
| J****mac
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 26, 2015  |  Ends: 6d, 17h  |   11 Proposals
Product design/engineer. This site confuses me . I am not willing to describe this product without a non disclosure signed. I would think they would have thought of that.
Category: Mechanical       
Skills: AutoCAD       

r****ibe
 [?]
Sign in to view client's details.
| r****ibe
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 26, 2015  |  Ends: 6d, 16h  |   15 Proposals
need help to make the presentation more clear to management. English is not my first language, I need help to shape my presentation and correct the sentences that don't clearly describe the situation I would like to address.
Category: Other - Engineering &...       
Preferred Location: North America

E****886
 [?]
Sign in to view client's details.
| E****886
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Jun 26, 2015  |  Ends: 6d, 15h  |   6 Proposals
I have an Ultrasonic cuter that has documentation for activating automation and return a signal to automation after the cut is made. Link to my cutter documentation is   [obscured]  /url?sa=t&rct=j&q=&esrc=s&source=web&cd=3&ved=0CCkQFjAC&url=http%3A%2F%2F  [obscured]  %2Fus%2FDocuments%2FManuals%2F403-594.pdf&ei=QqiNVeSNOoncsAXUwL6ICg&usg=AFQjCNFhQ2Wvu1FtF8b49yLcs3UyFDk1Cg&bvm=bv.96783405,d.b2w . I need a setup to measure and feed 1" and 2" webbing. Webbing is on a roll so very little tongue required to pull. Need pulls as short as 4 inches to 85 inch. Accuracy needs to be within " 1/8 on 80 inch length.
Category: Product Design       

a****ock
 [?]
Sign in to view client's details.
| a****ock
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 26, 2015  |  Ends: 6d, 14h  |   7 Proposals
I have an idea of a new compact keyboard that operates differently than the standard keyboard. The design is unique and different.
Category: 3D Modelling       
Skills: Bluetooth       

c****myn
 [?]
Sign in to view client's details.
| c****myn
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 26, 2015  |  Ends: 6d, 12h  |   7 Proposals
I am looking to improve conventional HFAC (air conditioning system) Controller. I need design for the board and prototype made if needed. The system will do the following Input 120VAC and 240VAC / Output 24VAC Board will receive input from 8 thermostats which send 24VAC signal to Board When Signal is received the Board needs to start (using relay) High Voltage Motors (blowers) and in some cases also send 24VAC to another device. Board needs to be connected to Network using Ethernet Cable All of these rules need to be configurable in some software utility Board needs to be connected ready OHM from Temperature sensors (8 of them ) Board needs to be able to receive information from network for each 8 zones about Requested temperature. Board needs to make decisions as to if temperature is ABOVE requested then DO THIS if below THEN DO THIS. Programmable on board. This is the first time I am designing a board so I will need assistance and iterations.
Category: Product Design       

T****ORP
 [?]
Sign in to view client's details.
| T****ORP
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 26, 2015  |  Ends: 6d, 12h  |   8 Proposals
I need to hire a computer graphic designer for a patent pending product my sister has invented. We would need schematic CAD-like images to submit with the non-provisional utility patent application, and we would also need some 3D renderings and animation to help market the product and pitch it to manufacturers. The CAD-like images for the patent application take priority over the animation for now, so we may only need those as a first job, with the animation to market the product being the second job at a later time. The product involved is a type of furniture for the baby and child care industry. We prefer to work with people who have kids, since they will have a better understanding of the product's purpose. Please submit a portfolio, along with present and past client reviews. Thanks! Best Regards, Mike
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       
Preferred Location: United States

b****iku
 [?]
Sign in to view client's details.
| b****iku
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 26, 2015  |  Ends: 6d, 11h  |   1 Proposal
We are a kitchen cabinet manufacturer, operating out of two modern production facilities in central Canada. We build European frame-less style box cabinetry. We are seeking an expert IMOS 11.0 Technician. The project will involve configuration of our product offering to the North American market. The competency level of the Technician will determine the scope of the project. Proficiency in English is a requirement.
Category: CAD       

D****eer
 [?]
Sign in to view client's details.
| D****eer
|    Canada
Fixed Price: $500 - $1,000   |  Posted: Jun 26, 2015  |  Ends: 6d, 9h  |   8 Proposals
Design and stamp a concrete slab foundation for a residential project. I currently have the the full house plans and a tentative slab design but it is not Texas stamped. Will need full set of stamped foundation only drawings for submission to county for construction, include rough in for plumbing.
Category: Civil & Structural       
Skills: Civil Engineering       

j****vcs
 [?]
Sign in to view client's details.
| j****vcs
|    United States
Fixed Price: Not Sure   |  Posted: Jun 26, 2015  |  Ends: 6d, 9h  |   12 Proposals
delineating land boundaries, easements, topographic features, subdivision mapping, legal description exhibits,
Category: Civil & Structural       

v****fan
 [?]
Sign in to view client's details.
| v****fan
|    United States
Fixed Price: Not Sure   |  Posted: Jun 26, 2015  |  Ends: 6d, 4h  |   12 Proposals
HI I 'd like to upgraded our website, xcl.fangda.com. We are specilized in aluminium cladding and facade decoration and had alot of project all over the world . As a professional manufacturer in the industry for aluminium composite panel and solide aluminium panel ,we are going to develop marketing through web,google SEO and google adwords . All content needs to be redesigned,so experiences for the web which regarding industry products or building project needed . This needs to done under wordpress plateform . Keywords placed in the web is very importmant and some articles will be paied extrally. The articles may used or posted in facebook ,twitter and other SNS . Also this will be updated in long term ,for example we get new project in XXX country. The final aim we are expecting is new idea web for goolg marketing. Please browse the our site and feedback how you think for the case and how you plan to do the job and price for it . Thank you. Leo Design Type: Redesign Purpose ...
Category: Website Design       
Skills: CSS, HTML, WordPress, Web Design, 276       

s****015
 [?]
Sign in to view client's details.
| s****015
|    United States
Fixed Price: Not Sure   |  Posted: Jun 26, 2015  |  Ends: 6d, 4h  |   10 Proposals
I need someone with the smarts to do a feasibility study of a concept for an innovated product. The product will utilise the charateristics of modern phase change materials for thermal control. It is a very basic product in principle but need some up front info prior to moving to design/testing etc. I don't see the study being too detailed but something rather basic for an engineer with material knowledge and thermal balance type knowledge. So if you think you are capable then please send me a reply. More info can be given to suitable candidates. Also at this stage I would prefer working with someone in Australia.
Category: Product Design       
Preferred Location: Australia/Oceania

N****L83
 [?]
Sign in to view client's details.
| N****L83
|    Australia
Fixed Price: Not Sure   |  Posted: Jun 26, 2015  |  Ends: 6d, 1h  |   9 Proposals
We have an idea or a concept that we believe will greatly solve an Asian takeout food issue. There is a rough sketch which we need someone to design professionally in order for us to be able to manufacture it. Payment by PayPal only.
Category: Label & Package Design       

i****eer
 [?]
Sign in to view client's details.
| i****eer
|    Singapore
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 26, 2015  |  Ends: 6d, 0h  |   18 Proposals
Hi My company is looking for agent in China to source products from local manufactureres. We also need a person who can do quality control for our products in China. Thank you
Category: Other - Engineering &...       

s****tem
 [?]
Sign in to view client's details.
| s****tem
|    Israel
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job