Save this Search
     
Sort by:
  • Posted Date
Posted: Within 24 hours
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 58 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
The job is for the product design of a pair of sports wrap around sunglasses which contain electronics at the corners before the leg hinges. A single lens design with the nose bridge completely separate from the frame is wanted. The two main electronics modules are approximately 12mm*12mm*3mm to be embedded at the corners of the frames and with 4 buttons also located at the corners. Wiring between the modules needs to run behind the top of the glasses lens. Below shows examples of the desired style:   [obscured]  /item/Men-s-Sunglasses-100-Top-Quanlity-Sports-Sunglasses-fashion-sunglasses-brand-sunglasses-Ride-Glasses-eyeglasses-sports/355777567.html   [obscured]  /oakley-wrap-around-sunglasses/p/itmdtz5s6qjkgxzw   [obscured]  /sports-wrap-around-sunglasses-d548-orange-uv400/
Category: Product Design       

b****eda
 [?]
Sign in to view client's details.
| b****eda
|    Ireland
Fixed Price: $700 or more   |  Posted: 1h, 23m ago  |  Ends: 14d, 22h  |   3 Proposals
Rebuild two KiCAD PCBs in Altium. The files are available here:   [obscured]  /sh/uabtabd1aara1x8/AAB4m... Deliverables include: 1: Gerbers 2: PDF of every layer 3: 3D Renders 4: STEP file of final board 5: BOM (which we call an Master Component List) 6: Altium project files 7: Schematic in pdf form 8: assembly/fabrication drawing with dimensions 9: Pick n place text file.
Category: Electrical       

h****agi
 [?]
Sign in to view client's details.
| h****agi
|    United States
Fixed Price: Less than $500   |  Posted: 1h, 34m ago  |  Ends: 14d, 22h  |   1 Proposal
need someone to draw a animated 3d telescoping assembly, must be able to do this job within 12 hours it is a relatively simple design
Category: 3D Modelling       
Skills: 3ds Max, 3D Modeling, 3d Animation, 3D Design       

J****NES
 [?]
Sign in to view client's details.
| J****NES
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 3h, 11m ago  |  Ends: 14d, 20h  |   0 Proposals
Apply here if you're a manufacturer and you can develop a soft good prototype. This is a unique project and requires high competency in soft good production. This is strictly soft good project.
Category: Other - Engineering &...       

M****123
 [?]
Sign in to view client's details.
| M****123
|    Nigeria
Fixed Price: $20 - $30   |  Posted: 3h, 27m ago  |  Ends: 14d, 20h  |   3 Proposals
INTERIOR DESIGN AND RENDERINGS FOR AN IMPORTANT CLIENT IN USA AND CANADA. NOTES WILL BE SUPPLIED PRIVATELY PRESENTATION AND DESIGN MUST BE PERFECT
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

m****ano
 [?]
Sign in to view client's details.
| m****ano *
|    Canada
Fixed Price: $20 - $30   |  Posted: 3h, 34m ago  |  Ends: 14d, 20h  |   0 Proposals
exterior rendering and 2 interior renderings for an important client. Notes will follow privately interior design and exterior rendering must look stunning
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

m****ano
 [?]
Sign in to view client's details.
| m****ano *
|    Canada
Fixed Price: Not Sure   |  Posted: 4h, 14m ago  |  Ends: 14d, 19h  |   0 Proposals
This job is a call for a complete concept design and architectural services for a mixed space entertainment project in Nigeria. It is approximately 18 hectares of land, which will include: retail shops, aquarium, botanical garden, a carousel, 2 drop tower rides, a zip-line ride, 5 water park rides, conference center, and hotel. We have a general concept design already mapped out, but would like it polished and refined. However, our main concerns are identifying zones by theme, function, circulation, as well as plan layouts for all guest areas, and back of house functions. In general we will require conceptualization, design and engineering plans for the project. Skills desired: architectural/ engineering drawings, concept design, landscape design, interior design, 3d modeling, AutoCad etc. *Portfolio required.
Category: Architecture       
Preferred Location: North America

F****cts
 [?]
Sign in to view client's details.
| F****cts
|    United States
Fixed Price: Not Sure   |  Posted: 6h, 59m ago  |  Ends: 14d, 17h  |   5 Proposals
I need to have a samples created based on a design that my team has developed. I will supply the technical documents (gerber, BOM and layout, etc.) for the product. These boards will be used of the development/testing and ultimate the baseline for the end product. The ESP8266EX is the WiFi SoC that is the foundation of the design.
Category: Mechanical       

i****er1
 [?]
Sign in to view client's details.
| i****er1
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 7h, 2m ago  |  Ends: 14d, 16h  |   8 Proposals
Hi, I would like to design a logo for my company which is into engineering services. Our focus area is into automotive engineering. To be very precise we service clients in automobile manufacturing or earth mover equipment manufacturing companies.
Category: Logos       

k****n19
 [?]
Sign in to view client's details.
| k****n19
|    India
Fixed Price: Not Sure   |  Posted: 7h, 18m ago  |  Ends: 14d, 16h  |   6 Proposals
I have a patent on an automotive product.I have run some tests and I need an engineer to convert my data from horsepower to gas mileage.
Category: Other - Engineering &...       
Preferred Location: United States

B****nal
 [?]
Sign in to view client's details.
| B****nal
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: 7h, 29m ago  |  Ends: 14d, 16h  |   6 Proposals
We have a project that involves a flight entertainment system. The display is like a tablet on the back of the seats. We have the specs and dimensions. Need a designer to do the industrial design that we would work with an ODM to develop and manufacture.
Category: Product Design       

g****d69
 [?]
Sign in to view client's details.
| g****d69
|    United States
Fixed Price: Less than $500   |  Posted: 7h, 53m ago  |  Ends: 14d, 16h  |   8 Proposals
Optimum Design Associates is an electronics manufacturing and PCB design company located in the San Francisco bay area. We are presently interested in hiring 1-3 talented writers to produce content for our blog (blog.optimumdesign.com). Content is focused on supply chain and purchasing, pricing, electrical engineering and PCB design principles, and outsourcing. Attached is our Writer's Guidelines which can give you a more thorough idea of our desired tone and target audience. Payment on a per-post basis, rate determined by determined by experience. We're happy to pay premium prices for premium quality content.
Category: Technical Writing       

O****EMS
 [?]
Sign in to view client's details.
| O****EMS
|    United States
Fixed Price: $20 - $200   |  Posted: 8h, 17m ago  |  Ends: 14d, 15h  |   7 Proposals
I am looking to build a product made out of molded plastic. It will be fairly similar to the suncast serving cart Link to product can be found here:   [obscured]  /ip/19725646?wmlspartner=wlpa&adid=22222222227014894664&wl0=&wl1=g&wl2=t&wl3=40471114832&wl4=&wl5=pla&wl6=60820257686&veh=sem I just want to vary some features however. Whomever helps me design plans should know I will be taking these plans to a manufacturer so I will need you to understand what they are looking for.
Category: Product Design       

P****ate
 [?]
Sign in to view client's details.
| P****ate
|    United States
Fixed Price: Less than $500   |  Posted: 8h, 20m ago  |  Ends: 14d, 15h  |   6 Proposals
I require a structural engineer to design and calculate wind loadings of a solid screen surface which will be suspended on a frame which I have already purchased. I need a design & calculations to ensure it wont blow over.
Category: Civil & Structural       

b****810
 [?]
Sign in to view client's details.
| b****810
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 8h, 37m ago  |  Ends: 14d, 15h  |   15 Proposals
I need someone to take my conceptual design for product components and create the 3d models to create a production prototype. I will need you to sign an NDA for my design for 2 years. The design is for a robot components
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

c****net
 [?]
Sign in to view client's details.
| c****net
|    United States
Fixed Price: Less than $500   |  Posted: 9h, 42m ago  |  Ends: 14d, 14h  |   0 Proposals
Dear Developer, Our company needs a custom hologram which has a foot print size of 9mm X 30 mm The hologram should have a design and made out of material which can store frequencies. We would like to have a short conversation with your experts in this matter. We are looking forward to working with you. Sincerely, David Zulasky
Category: Other - Engineering &...       
Skills: Embedded Systems, Quantum       

d****sky
 [?]
Sign in to view client's details.
| d****sky
|    United States
Fixed Price: Less than $500   |  Posted: 10h, 11m ago  |  Ends: 14d, 13h  |   10 Proposals
I am assisting an inventor in need of a prototype. Essentially, the design includes modifications to a standard twist on 3-litre soda bottle cap. We intend to source the printing locally but require a .stl rendering.
Category: Product Design       
Skills: 3D Modeling, AutoCAD       

V****ill
 [?]
Sign in to view client's details.
| V****ill
|    United States
Fixed Price: Not Sure   |  Posted: 11h, 38m ago  |  Ends: 14d, 12h  |   2 Proposals
Hi All I m looking for someone who can help me customize an existing Smartphone PCB to meet my requierements
Category: Other - Engineering &...       

h****ana
 [?]
Sign in to view client's details.
| h****ana
|    Rwanda
Fixed Price: Not Sure   |  Posted: 16h, 53m ago  |  Ends: 14d, 7h  |   43 Proposals
We are looking for a professional designer to design our two company's logo firstly, and then business card and catalogue/E-book, marketing materials. But firstly finish the logo/Brand building. 1) First company is manufacturing gully tops and manhole covers for vehicular and pedestrian areas-made of composite material (SMC sheet moulding compounded). Company name is : Zhejiang Resin Municipal Facility Co.,LTD Logo name we want to be made"Resin" or "Resin group" Domain is:   [obscured]  -group.com 2) Secondly company is: Company name: FIRST INDUSTRIAL DEVELOPMENT CO.,LIMITED Website: www.*****.com Logo: Firsth2o First meaning our products are in high quality and customers is not regret to buy,because this company is specialized in water,ice and coffee machine products,water from this company is most pure,best clean and transparent. H20 is the chemical symbol of water, related to water related products industry. They are two independent companies. Design preferred in c...
Category: Logos       
Skills: Logo Design, Adobe Acrobat, 3D Design       

D****ang
 [?]
Sign in to view client's details.
| D****ang
|    United States
Fixed Price: Less than $500   |  Posted: 16h, 59m ago  |  Ends: 14d, 7h  |   11 Proposals
Hi there, I need CAD draftings/renderings prior to fabrication of advanced prototypes of a new physical therapy and entertainment device/product for infants. I have detailed sketches and descriptions prepared however there are some elements that are open for you to add your creative design touches. Applicants will need to sign NDA prior to release of detailed description. Regards. Ben
Category: Product Design       

b****set
 [?]
Sign in to view client's details.
| b****set
|    Australia
Fixed Price: $200 or more   |  Posted: 18h, 20m ago  |  Ends: 14d, 5h  |   5 Proposals
Complete the DFM process for Anthem Power & Anthem Power Plus. Be aware that Chris Hoppe will "shadow" you through the process. He wants to see each sub-assembly completed individually. The first subassembly is the Battery Pack, a lithium-ion battery that slides into Anthem Power. The other components will include three (3) PCBs as well as about ten (10) metal & plastic components that compose the outer housing for Anthem Power & Anthem Power Plus.
Category: Mechanical       

h****agi
 [?]
Sign in to view client's details.
| h****agi
|    United States
Fixed Price: Less than $500   |  Posted: 20h, 34m ago  |  Ends: 14d, 3h  |   8 Proposals
The packaging needs to be printed with a design that you will create for us on a cartoned box similar to the attached. We will give the design brief but it will be quite basic. The packaging will need to be Matte Black with a metallic green image and text. Initial supply is for 500. They must be delivered to Melbourne, Australia. I will also require details of who you will use to print the packaging. Samples are also required of previous work.
Category: Product Design       
Skills: 3D Printing, Product Design       

d****an0
 [?]
Sign in to view client's details.
| d****an0
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 22h, 2m ago  |  Ends: 14d, 1h  |   34 Proposals
Looking for someone to convert product drawings to 3D AutoCad. The product has a simple design, shouldn't be too difficult to make. Will provide pictures pictures.
Category: 3D Modelling       
Skills: 3D, AutoCAD       

w****tip
 [?]
Sign in to view client's details.
| w****tip
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job