Save this Search
     

All JobsMaterials Engineering

 (123 results)  
Sort by:
  • Posted Date
Results for 'Materials Engineering'
Fixed Price: $1,000 - $5,000   |  Posted: 43 minutes ago  |  Ends: 89d, 23h  |   0 Proposals
We are seeking to employ a dynamic professional to assume the role of Usability Engineer Job Description: Provide human factors engineering and user research support to application development teams Communicate a usability plan for a product area Conduct usability evaluations, focus groups, customer research, competitive analysis and survey research for software products Produce specifications describing user characteristics, user needs, and user interface requirements for product development Develop usability test plans and materials Operating video recording and data logging equipment as part of usability evaluations Employ user research methodologies to identify user requirements Planning and conducting contextual research, analyzing data, interpreting results, and presenting research findings to product development teams Document existing procedures and policies Managing assigned projects to deliver services in accordance with established objectives. Person Specification: A Univer...
Category: Product Management       

h****are
 [?]
Sign in to view client's details.
| h****are
|    Cyprus
Fixed Price: $500 - $1,000   |  Posted: 5h, 16m ago  |  Ends: 14d, 18h  |   4 Proposals
? Writing all different kinds of official documents like Faxes, Official Letters, Memos, Contracts, and other similar forms. ? Receiving and checking and sending incoming and outgoing e-mails. ? Arranging Appointments & schedule for meetings. ? Handle E-mails with head of departments. ? Handle the weekly manpower distribution report with the project managers. ? Preparing organized Meetings with Sub-contractors and Engineers process. ? Preparing organized filling systems in both Hard and Soft Copies. ? Dealing with different kinds of official documents like Faxes, Official Letters, Memos, Contracts, and other similar forms. ? Preparing the periodic reports. ? Acting as a link between operation manager and head of departments. ? Preparing customer complaint, local material and monthly reports. ? Organizing, ordering, and redistribute official documents in different Filling systems. ? Arrange All Appointments such as Meeting, Events, Seminar. ? Perform other related duties as requ...
Category: Office Management       

s****zly
 [?]
Sign in to view client's details.
| s****zly
|    Egypt
Fixed Price: Less than $500   |  Posted: 5h, 39m ago  |  Ends: 14d, 18h  |   6 Proposals
in simple english, I go to do sales for building materials, i see a site under construction i go and talk to site engineer. then i want to mark the location by GPS to be able to come back since there is no address. I get some info from site engineer that i need to add to the database, i work with couple of colleagues not alone. sales also can be done by telephone, also need to record all info, or bring the info up to follow the calls. no need for that part of connecting the landline to the PC. Sending location map to website and some information from a mobile phone, and can follow up with more info, clipping the place that was send to the website from the map and saving it as pic on the data base. Generating a map that has all locations that were sent to the website and saved and can be displayed together in one map, it can be printable too, in different paper sizes. Also recording companies visited or by telephone call, connecting land-line to a pc at office it can trace the number ...
Category: Web Programming       
Skills: MySQL Administration, .NET Framework, HTML, PHP       

f****san
 [?]
Sign in to view client's details.
| f****san *
|    United Arab Emirates
Hourly Rate: $15 - $20 / hr   |  Duration: 3-4 weeks  |  Posted: 6h, 40m ago  |  Ends: 14d, 17h  |   1 Proposal
We are looking for a technical writer to write materials for 1 module of our Advanced Diploma of Civil and Structural Engineering course (see brochure attached). The course is delivered on-line. The Module is titled: VU21139 Produce Advanced Engineering Drawings for a Steel Structure. The topics that must be covered are shown in the course outline (attached). The unit runs over 3 weeks (3 x 1 hour webinars) and we will need reading materials (in word, using our template) PowerPoint slides (approx 120 or 40 per webinar) and 3 assessments. You will need to use our templates and you will be required to map the materials so we can ensure all topics are covered (I will explain how to do this). You must be a qualified and experienced civil/structural engineer and be able to competently use Word and Excel. You must have excellent written English language skills. We will provide any resources required (such as Australian Standards). Please respond with your CV and a few paragraphs ...
Category: Academic Writing       

S****kay
 [?]
Sign in to view client's details.
| S****kay
|    Australia
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: 11h, 9m ago  |  Ends: 14d, 12h  |   4 Proposals
Design of a 3D printed model that will fit a small computer board and camera Basically it's an ODROID system with a camera. The system comes with a small plastic case. However, I want to design a customer container for the device. I need a time and materials estimation of what this would cost. If the price is right, I would like to hire.
Category: 3D Modelling       
Skills: Computer-Aided Design, 3D Printing       

j****scu
 [?]
Sign in to view client's details.
| j****scu
|    United States
Fixed Price: $500 - $1,000   |  Posted: 15h, 6m ago  |  Ends: 1d, 8h  |   24 Proposals
Carbon filter vessel: drawn using inventor (for the model) and Auto Cad (for the workshop drawings). The vessel is made from stainless steel has 2 barrels, dome head top and bottom, approx. 7 nozzles and sits on 3 support legs. More details provided later. Parts list and Bill of Materials is also required.
Category: 3D Modelling       
Skills: Autodesk Inventor, AutoCAD       

F****ing
 [?]
Sign in to view client's details.
| F****ing
|    Australia
Fixed Price: Not Sure   |  Posted: 15h, 50m ago  |  Ends: 14d, 8h  |   3 Proposals
Mechanical conception of a mobile robot. Sizes : 25 x 25 x 13 cm Weight : less than 1 kg Rugged : must be resistant to 4-5 meters drop shocks Waterproof : must be waterproof to 1 meter deep for some minutes. Components inside : electronic, motors, camera, light, battery and others Wheels : 3 motorized wheels, 3 DC mini motors Tilt : 1 front servo motor with movement + to -90 degrees Robot in black matt color, material in ABS or ABS + Nylon or other. Must be high resistant to sunshine and shocks. Must have a plug&play battery compartment. Something easy to use with gloves, fast and efficience. We research someone with a high experience, with waterproof and shockproof knowledges, and plug&play experience. We need to create also a new design for this robot.
Category: Product Design       

c****ids
 [?]
Sign in to view client's details.
| c****ids *
|    France
Fixed Price: Not Sure   |  Posted: 15h, 52m ago  |  Ends: 14d, 8h  |   1 Proposal
Mechanical conception of a mobile robot. Sizes : 25 x 25 x 13 cm Weight : less than 1 kg Rugged : must be resistant to 4-5 meters drop shocks Waterproof : must be waterproof to 1 meter deep for some minutes. Components inside : electronic, motors, camera, light, battery and others Wheels : 3 motorized wheels, 3 DC mini motors Tilt : 1 front servo motor with movement + to -90 degrees Robot in black matt color, material in ABS or ABS + Nylon or other. Must be high resistant to sunshine and shocks. Must have a plug&play battery compartment. Something easy to use with gloves, fast and efficience. We research someone with a high experience, with waterproof and shockproof knowledges, and plug&play experience. We need to create also a new design for this robot.
Category: Mechanical       

c****ids
 [?]
Sign in to view client's details.
| c****ids *
|    France
Fixed Price: Less than $500   |  Posted: 16h, 47m ago  |  Ends: 14d, 7h  |   8 Proposals
I need to have an Engineer do the framing plans on a home for a job I am working on to bid out to estimate my budget. The city I am in is Frisco Texas and they require the plans to be stamped by and engineer. There are several wide rooms and a covered porch that will need to have trusses/glulam beams with cross boards to support the open spans. I also need someone who is familiar with cost to help me figure out the most affordable take off for materials. I have the floor plan, roof plan, elevation plans in an editable autocad file format to work from. See attached pdf floor plan. I look forward to your bid !
Category: Civil & Structural       
Skills: AutoCAD, Civil Engineering       

k****123
 [?]
Sign in to view client's details.
| k****123
|    United States
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: 18h, 50m ago  |  Ends: 14d, 5h  |   19 Proposals
I'm designing a robot lawn mower. It uses a rotary cutting system. I'm looking for a mechanical engineer to design and model the blade and the hub it mounts to. The design will need to take into account airflow, mechanical cutting, materials, and manufacturing. I'm expecting this to take between 2 and 4 weeks, but correct me if this is unreasonable. I would prefer SolidWorks 2015, but am open to other formats for a strong engineer. I will need the winning engineer to sign an NDA for this work.
Category: Mechanical       

p****cts
 [?]
Sign in to view client's details.
| p****cts
|    United States
Fixed Price: More than $10,000   |  Posted: 22h, 17m ago  |  Ends: 24d, 20h  |   3 Proposals
Field Service / Applications Engineer Company Work Location: Waukesha, WI Salary: $60,000 - $80,000 Job Description: Experienced Field Service / Applications Engineer is required having responsibility to Supports Sales by evaluating the Technical/Commercial feasibility of a tender and help to clarify customer inquiries and specifications. Requirements: ? Experience with Mitsubishi, Fanuc, and Siemens controls is critical. ? Min. 2-3 years working experience with Turbo-expanders and/or Compressors. ? 5 to 10 years of experience in design engineering, applications engineering, high technology sales support, or field service. ? Requires knowledge of API, ASME, NEC (or IEC) codes. ? Experience integrating automation and motion control components such as motors, feedback devices and servo drives and controllers ? Process design knowledge, experience reading and interpreting technical specifications, and familiarity with technical drawing sets. ? Ideally someone with experience in...
Category: Electrical       

P****era
 [?]
Sign in to view client's details.
| P****era
|    India
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: May 24, 2015  |  Ends: 13d, 23h  |   24 Proposals
The project is to design approx 16 townhouses on a block of land in a small 3600m2. Each townhouse shall include - 3 bedrooms (3x3m for 2nd and 3rd bedroom, main room a little larger) - 2.5 bathrooms (1 ensuite, toilet downstairs, family bathroom with bath) - Kitchen, living and dining room in an alfresco arrangement - single or double garage (6m x 3m for single, 6m x 5.7m for double) - Laundry - Double story Total living area (not including garage) is to be less than 100m2. The land has a gradient on it that make approx 7m over 100m. Retaining walls will have to be shown on the plans that are a maximum of 1m high but can be stepped at 1m from each other in areas that need it. Ideally fill and cut material will be equal. Backyards to have a minimum 36m2 area. An area of 4m x4m must receive sunlight for 3hrs on the winter solstice. The land has three frontages but only two can be used for driveways. The frontage with driveways are 45m and 20m. The design must comply with   [obscured]  
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD, Home Design       

T****eng
 [?]
Sign in to view client's details.
| T****eng
|    Australia
Fixed Price: $20 - $50   |  Posted: May 24, 2015  |  Ends: 13d, 22h  |   31 Proposals
We need drawings to give to a woodworker so he can build this desk. We prefer you do the in autocad / sketckup but if you have other software just mention what you would like to use. All our other projects require autocad but we can make an exception on this one. Drawings must be in enough detail ( dimensions etc.) so the woodworker can order material and build it . We need plans, elevation details, and 3d views ( 3 minimum) Attached is are 2 sketches of the design for the desk. Also we have attached a bunk bed design we had done - this shows the quality of what we want for the desk. Please note submissions without a fixed fee will not be considered. Please show only 1, 2, or 3 examples of furniture design. Thanks
Category: CAD       
Skills: AutoCAD, SolidWorks, SketchUp Pro, AutoDesk Revit       

s****ner
 [?]
Sign in to view client's details.
| s****ner
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: May 24, 2015  |  Ends: 13d, 14h  |   34 Proposals
We will provide 2d autocad drawings of Kitchens & we need these rendered in 3d as photorealistically as possible. The intention is to create a catalogue of sorts, that will act as ideas for inspiration. Initially, we will be requiring 50 kitchen renders, of different shapes and finishes. You are free to choose materials and decor around the kitchen, so as to create 50 unique designs. For each 3d design, you will have to render and provide 2 views from different angles. One unique finish is sufficient for each 3d design. There will be future work following this, including more kitchens, furniture, bathrooms, living rooms, bedrooms etc., based on work quality and a good working relationship.
Category: Architecture       

n****rrr
 [?]
Sign in to view client's details.
| n****rrr
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 23, 2015  |  Ends: 13d, 6h  |   4 Proposals
Hi, I am looking into creating my custom mirror Photo Booth. However i don't know exactly what i needed to replicate it. Below you will find some photos of people who have done it before. What i need is for someone to look into what equipments i will need to purchase and provide me with exactly what material i need to buy/use for the mirror etc..   [obscured]     [obscured]     [obscured]  /products/mirror-me-booth/?gclid=Cj0KEQjwyoCrBRCl-aa97pKX_t8BEiQAbrs_9Fso3TPCLvXafZlu-ycUWG1QdBQmMVlN87pPED87tzMaAmZc8P8HAQ
Category: Product Design       

P****Glo
 [?]
Sign in to view client's details.
| P****Glo
|    Qatar
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: May 23, 2015  |  Ends: 13d, 3h  |   14 Proposals
I have a new website and need help to get customers. The web site allow you to extract meaningful information from messages that you receive and perform some action with the extracted data. The successful candidate will be responsible for setting up the campaigns, monitoring and optimizing, and provide weekly/monthly reports. Since the site is new I am open to explore and implement a couple options that include paid and organic traffic. I would like to run this over 4-6 weeks. I have allotted 2 hours per week, but lets try to keep this to 1 hour/week as much as possible until we are able to bump up budget. Job Description: Your responsibilities: - Create and manage a multi-channel brand and communication strategy with our team utilizing online and direct marketing techniques - Conceptualize unique marketing programs to increase brand awareness and increase customer acquisition - Develop messaging for all audiences to accurately convey our core brand identity - Work with team ...
Category: Marketing Strategy       

d****ode
 [?]
Sign in to view client's details.
| d****ode
|    Canada
Fixed Price: Not Sure   |  Posted: May 23, 2015  |  Ends: 12d, 23h  |   17 Proposals
Design and produce construction drawings for residential and commercial projects, including, new projects, renovations, remodel, kitchen design, etc. Plan material take offs Price will be fixed based on size and complexity of project
Category: Architecture       
Skills: 3D Modeling, Architecture, Home Design       

s****nek
 [?]
Sign in to view client's details.
| s****nek
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 22, 2015  |  Ends: 12d, 13h  |   9 Proposals
I have plans to build 2x 12x3m buildings which need the materials Qty to be taken off. This only includes the extra work for the buildings ie the steel frame the building is suspended on. It also includes such things as the amount of concrete required, the steel frame and also timber decking qty and stairs details. This must be itemized: 1. Additional Steel Structure 2. Veranda 3. Stairs
Category: Other - Engineering &...       

R****tag
 [?]
Sign in to view client's details.
| R****tag
|    Australia
Hourly Rate: $10 - $15 / hr   |  Duration: 4-6 months  |  Posted: May 22, 2015  |  Ends: 4d, 8h  |   8 Proposals
We need tutor to teach micro electroncs for following topics. 1.Semi conductor fundamentas. 2.Career Modelling 3.Carrer action. 4.PN Diode,BJT, ...etc Text book:Semi conductor Device fundamentals by Robert E Pierret Addision wesley publication
Category: Electrical       

s****jan
 [?]
Sign in to view client's details.
| s****jan
|    United States
Fixed Price: $500 - $1,000   |  Posted: May 22, 2015  |  Ends: 27d, 6h  |   0 Proposals
Arlo Skye is a startup. We are obsessed about bringing back desirability in luggage. We believe that luggage shouldn't just be a boring utility, but in fact a reflection of your appreciation of aesthetic and good taste. And we believe that all this should not cost you an arm or a leg. We are starting this journey by manufacturing two products from the same family: 2-wheeled and 4-wheeled Carry On. We have just finalized the 3D external design of the 2 wheeled and 4 wheeled carry on. We are now searching for a talented pattern maker who a basic understanding of engineering. You also need to have a basic understanding of hard-luggage construction. Both of the carry-ons will have an internal ABS Plastic light weight internal frame, and encased by PVC coated cotton canvas, with a leather trim, pockets, and zips. This is a chance for you to make a real difference in peoples lives by designing something incredible. What you'll do: - You will create manufacturing ready desig...
Category: Product Design       

a****kye
 [?]
Sign in to view client's details.
| a****kye
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 22, 2015  |  Ends: 12d, 4h  |   13 Proposals
The primary responsibilities will be requirements analysis and application design for a SaaS platform for use by our clients around the world. The current technology stack includes C#, NET, AngularJS, Bootstrap, Typescript, MySQL, SQL, Azure, and AWS. The individual in this role will help ensure the composite architecture is scalable, reliable, available and manageable. Essential Duties and Responsibilities -Design application technical infrastructure (databases, programming languages, utilities, testing approaches) -Aid in the assessment and solution of software defects discovered during the quality assurance process -Address enterprise-wide platform and technology requirements for applications -Develop detailed programming instructions to solve various issues that may arise -Document development requirements for database, applications and operation system requirements -Consult with end users to test and debug applications to meet client's needs -Good knowledge of JavaScript, Ja...
Category: Software Application       

M****949
 [?]
Sign in to view client's details.
| M****949
|    United States
Fixed Price: Not Sure   |  Posted: May 22, 2015  |  Ends: 56d, 23h  |   17 Proposals
Marketing project focused to a specific large users group location with different target identifiers, marketing campaign should include tools such as crowfunding strategies, social Media (facebook, twitter, etc), viral and e-mail marketing. Content material must be of such a power to create word of mouth marketing; focused projected audience may be broken down by many identifiers targets and niches.
Category: Search Engine Marketing       

l****013
 [?]
Sign in to view client's details.
| l****013
|    United States
Fixed Price: Less than $500   |  Posted: May 22, 2015  |  Ends: 11d, 19h  |   13 Proposals
I am looking for someone who can take a set of 2D drawings and convert them into a 3D Revit model using specifications provided. Providing all the outputs which are required for submission to UK Building Control (Construction Drawings). An important output here is to create schedules and material takes offs therefore freelancer must have a good knowledge of what is needed to input the correct information needed to export accurate material take offs and schedules. (As mentioned, information about the building will be provided in specifications) I will also be looking for 3D external outputs. Applicant must have experience with this type of work and examples to demonstrate. Drawings can be provided upon request. Please apply with example of relevant work.
Category: Architecture       

P****BIM
 [?]
Sign in to view client's details.
| P****BIM *
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 22, 2015  |  Ends: 11d, 17h  |   5 Proposals
Looking for a chemist to make shampoo,styling products formulation for the European market. The job will be to make the formulation and find the raw materials.
Category: Chemical Engineering       

m****dot
 [?]
Sign in to view client's details.
| m****dot
|    Denmark
Fixed Price: Less than $500   |  Posted: May 22, 2015  |  Ends: 11d, 13h  |   3 Proposals
Please see attachment and read in full. We need plans to send to manufacturers that are clear and concise. Must have prior experience working with manufacturing design. Experience with magnets and materials a huge plus.
Category: Product Design       

m****n11
 [?]
Sign in to view client's details.
| m****n11
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job