Save this Search
     
Sort by:
  • Posted Date
Other - Engineering & Manufacturing
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 22, 2015  |  Ends: 13d, 14h  |   8 Proposals
I have plans to build 2x 12x3m buildings which need the materials Qty to be taken off. This only includes the extra work for the buildings ie the steel frame the building is suspended on. It also includes such things as the amount of concrete required, the steel frame and also timber decking qty and stairs details. This must be itemized: 1. Additional Steel Structure 2. Veranda 3. Stairs
Category: Other - Engineering &...       

R****tag
 [?]
Sign in to view client's details.
| R****tag
|    Australia
Fixed Price: Not Sure   |  Posted: May 18, 2015  |  Ends: 9d, 4h  |   11 Proposals
We need a device consisting of a microcontroller (such as Arduino) that will constantly monitor a voltage in the range of 0 to 3.3 V. When a voltage change is noticed, the microcontroller will wait until the voltage has stabilized to < 1% variation for at least 250 ms, and then send an RS-232 command at a baud rate of 115200 bit/sec. The command is in the form "P=Y.YYY" where Y.YYY is a number format with a value that ranges from 0.000 at an input voltage of 0V to 1.000 at an input voltage of 3.3 V, with a linear interpolation in between. The form factor is less than 7x7x2 cm. Input power is 24V provided through a BNC connector. It is preferable to use the RS-232D standard, with an RJ45 jack. The unit must start up and start functioning automatically when 24V power is applied. It would be good if we have the ability to reprogram the device simply on site in case we need to adjust some parameters. Supplier is responsible for procuring and assembling all parts, and...
Category: Other - Engineering &...       
Preferred Location: United States

C****100
 [?]
Sign in to view client's details.
| C****100
|    United States
Fixed Price: More than $10,000   |  Posted: May 15, 2015  |  Ends: 6d, 1h  |   3 Proposals
Hi, I'm looking for people who have the expertise to build a modern automated retail machine. Examples are :   [obscured]  /watch?v=vifBngmO5Ro#t=11   [obscured]  /watch?v=jo4g3cONJYU   [obscured]  /watch?v=23WsWelx4o8   [obscured]  /watch?v=LUaojH6Fk1Y   [obscured]  /watch?v=t_vUqHPsZoA   [obscured]  /watch?v=fm_u2LuYCrw A set of relevant skills would be : Industrial Design Embedded Systems Manufacturing Design Microcontroller Programming Robotics Payment Systems Material Science and Engineering A small incomplete list of the attributes of such a machine : Accept payment in notes and coins with a high level of reliability. High reliability, minimum downtime, enterprise grade software and easy maintenance Can be easily configured to handle a range of product sizes and shapes which may change from time to time Can dispense delicate items (for example, a tray of eggs) Capacitive (not resistive) touch screen. 20 inch display or bi...
Category: Other - Engineering &...       

k****lee
 [?]
Sign in to view client's details.
| k****lee
|    Singapore
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 13, 2015  |  Ends: 4d, 11h  |   4 Proposals
1. Responsible for the preparation of Bills of Quantities, Quantity Estimates & Costing of Projects for tenders. 2. Preparation of Cost Estimate for the Project 3. Carrying -out actual measurement on the Site 4. Preparation & Evaluating progress & preparing request for payments for on-going projects, its accomplishment & delivered materials. 5. Involved in both pre-contract 7 post contact services of the on0going & prospective projects
Category: Other - Engineering &...       

C****nao
 [?]
Sign in to view client's details.
| C****nao
|    United States
Fixed Price: Not Sure   |  Posted: May 13, 2015  |  Ends: 3d, 15h  |   4 Proposals
Looking for everything from design to specs to full manufacture of prototype. Materials: plastic, felt and p/leather. Electronics will most likely include small servo motor or other motorized retractable pulley system. Must have connection to manufacturer with all these materials. Must sign attached NDA and NCA to be considered.
Category: Other - Engineering &...       

C****usP
 [?]
Sign in to view client's details.
| C****usP
|    United States
Fixed Price: Not Sure   |  Posted: May 12, 2015  |  Ends: 18d, 9h  |   33 Proposals
Residential Construction Company is looking for qualified candidates to review plans and perform a detailed material takeoff for the purpose of construction estimating. Skills and experience expected: Knowledge of drawings and specifications for related work, as well as construction methods is essential. Must be able to do quantity take-offs of the following example list and more: -- materials (import/export of various fill materials, driveway areas, patio areas, walkway areas, etc), -- foundation materials (concrete block, poured concrete, ICF materials, pilings, etc), -- framing materials (all masonry, lumber, structural steel, etc) -- roofing materials (asphalt, wooden, clay tile, standing seam, etc) -- siding materials (vinyl, fiber cement/Hardie plank, stucco, masonry, etc) -- exterior trim materials (determine sizes and quantities) -- windows (determine quantity and sizings per rough openings) -- Flooring -- Drywall -- Insulation -- Electrical (type of service, panels, wirin...
Category: Other - Engineering &...       

A****yd2
 [?]
Sign in to view client's details.
| A****yd2
|    Canada
Fixed Price: Less than $500   |  Posted: May 12, 2015  |  Ends: 3d, 0h  |   1 Proposal
I am looking for someone to make (3) dog bed covers for me in the following sizes. (1) 23.5" wide x 35.5" long x 4" thick rectangle) (2)) 28" wide x 40" long x 4" thick (rectangle) I would like the covers made out of 1680D Ballistic Fabric (as it is chew and water resistant), and would like an opening on the long side to be with a velcro closure so that I can pull out the filling and wash it when needed. I am looking for an 'all in' price, materials and labor for all (3) dog beds, as well as a turnaround time, thanks!!
Category: Other - Engineering &...       
Skills: Embroidery, fabric, seamstress, sewing       

K****ice
 [?]
Sign in to view client's details.
| K****ice
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: Feb 28, 2015  |  Ends: 20d, 23h  |   3 Proposals
I'm looking for someone who can put plastic materials together that can glow in the dark at night and keep it's same color in the day time. The project is simple but I need them to sign a non-disclosure agreement.
Category: Other - Engineering &...       

b****910
 [?]
Sign in to view client's details.
| b****910
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job