Save this Search
     
Sort by:
  • Posted Date
Fixed Price: Less than $500   |  Posted: 8h, 17m ago  |  Ends: 14d, 15h  |   8 Proposals
I am looking for someone who can take a set of 2D drawings and convert them into a 3D Revit model using specifications provided. Providing all the outputs which are required for submission to UK Building Control (Construction Drawings). An important output here is to create schedules and material takes offs therefore freelancer must have a good knowledge of what is needed to input the correct information needed to export accurate material take offs and schedules. (As mentioned, information about the building will be provided in specifications) I will also be looking for 3D external outputs. Applicant must have experience with this type of work and examples to demonstrate. Drawings can be provided upon request. Please apply with example of relevant work.
Category: Architecture       

P****BIM
 [?]
Sign in to view client's details.
| P****BIM *
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 10h, 32m ago  |  Ends: 14d, 13h  |   1 Proposal
Looking for a chemist to make shampoo,styling products formulation for the European market. The job will be to make the formulation and find the raw materials.
Category: Chemical Engineering       

m****dot
 [?]
Sign in to view client's details.
| m****dot
|    Denmark
Fixed Price: Less than $500   |  Posted: 14h, 1m ago  |  Ends: 14d, 9h  |   1 Proposal
Please see attachment and read in full. We need plans to send to manufacturers that are clear and concise. Must have prior experience working with manufacturing design. Experience with magnets and materials a huge plus.
Category: Product Design       

m****n11
 [?]
Sign in to view client's details.
| m****n11
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 14h, 25m ago  |  Ends: 14d, 9h  |   6 Proposals
We have a project that requires the production of a 3D model from two sets of existing fabrication drawings, and the creation of new fabrication drawings. We would prefer Tekla be used for purposes of exporting the files to our CNC machines. As part of the work product, we require an accurate bill of materials be produced on the new set of fabrication drawings. The existing fabrication drawings require additional details and work to the point where we believe it is better to re-produce the model and drawings. However, the fabrication drawings are good enough to use to re produce a model and fab drawings to more accurately reflect the detail of each steel member/part. Our company does not currently have the availability to do it, as it is something we would need completed by Wednesday May 27.
Category: 3D Modelling       
Skills: 3D, Tekla Structures       

j****ant
 [?]
Sign in to view client's details.
| j****ant
|    United States
Fixed Price: Not Sure   |  Posted: 14h, 26m ago  |  Ends: 14d, 9h  |   12 Proposals
Need to get a house designed on 5 marla corner plot in Lahore. I need a architect who can visualize and materialize my requirements.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

n****nan
 [?]
Sign in to view client's details.
| n****nan
|    Pakistan
Fixed Price: Less than $500   |  Posted: 15h, 44m ago  |  Ends: 89d, 8h  |   2 Proposals
Looking for French architect, French registered architect or an architect knowledgeable of French planning permission with registered architect friends in France. 1 = We need example drawing templates for permis de construire application (for above 180m2). We have to apply for a building extension, the building is over 180m2. The extension "esquisse" has been seen by local planning permission & given the green light. We now need to make the final architectural drawings. Since the extension is simple & we have CAD skills, we'd like to do the drawings ourselves. However, we don't know the template/format for the drawings (i.e. kinds of symbols used, exact annotations, exact scales etc etc. Having examples of previous extension drawings, we could refer to, for making ours in the correct format. 2 = What is your fee to oversee our architectural drawings & put your (or your friends/colleagues) French registered architect stamp on, which is required before submittin...
Category: Architecture       
Skills: Architecture       

O****ODM
 [?]
Sign in to view client's details.
| O****ODM
|    United Kingdom
Fixed Price: $500 - $1,000   |  Posted: 20h, 55m ago  |  Ends: 14d, 3h  |   3 Proposals
Outpost Buildings manufacture & sell Timber kitset buildings in New Zealand. We are currently looking for someone to do the instruction drawings for some new kitset instructions we require. The rest of our Kitset instructions have been drawn with the program "Sketchup" so we prefer if this can be used for this job to make them look consistent with the rest of our instructions. Attached is a Sketchup file of the building we want the instructions for & also a PDF copy of instructions for a different design. This PDF attachment is to give you an idea of what we want to achieve, what drawings you will need to do & in what style. From this sketchup file we will need the kitset instruction drawings to show customers/builders how the building should be assembled. The PDF example file supplied will give you an idea of what is required and here is a list of the drawings we require: - Step one: End portals & walls - Step two: Centre portal - Step three: Portal top ...
Category: CAD       
Skills: Adobe InDesign, 3D Modeling, SketchUp       
Preferred Location: Australia/Oceania

O****ets
 [?]
Sign in to view client's details.
| O****ets
|    New Zealand
Fixed Price: $20 - $40   |  Posted: 22h, 47m ago  |  Ends: 14d, 1h  |   0 Proposals
I was wondering if I can speak or get advice from someone who uses Maxon Cinema 4D and Vray for rendering models. I am having two issues regarding my renders - when I render my scene it turns out black...why does this appear black in the screen? Also, when I use a .C4D file on another computer, my custom made material textures disappeared and I had to re-upload it again. why does this happen all the time? Please let me know as I need to render the scenes for a portfolio submission.
Category: 3D Modelling       

M****iah
 [?]
Sign in to view client's details.
| M****iah
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 23h, 34m ago  |  Ends: 14d, 0h  |   9 Proposals
I have developed an idea for a product that will have the following characteristics: - Be a small proximity sensor for determining if an object is within 2 inches of the sensor - Be powered using a small coin size battery - Be connected to smart devices using Bluetooth Low Energy - Be part of a mesh network using Bluetooth Below are the areas I will need assistance in: - Selecting the electronic components for the product - Designing the electronic circuit schematic - Designing the printed circuit board layout - Creating the bill of materials to be sent to have the PCB produced and have the electronic components attached If you are an electronic design engineer with experience developing small Bluetooth enabled products (experience using Bluetooth mesh capabilities would be a major plus) and would be interested in working on this project, please let me know!
Category: Electrical       
Skills: PCB Design, Bluetooth, Hardware Prototyping       
Preferred Location: United States

W****m-M
 [?]
Sign in to view client's details.
| W****m-M
|    United States
Fixed Price: Not Sure   |  Posted: May 21, 2015  |  Ends: 13d, 23h  |   5 Proposals
We are a private group looking to create a cleaning product for a niche market. We have the concept and much of the background research complete but we need a formulation/analytical chemist to formulate the cleaning fluid and test it on our target material to ensure that the integrity of the material is not harmed. To be specific (without needing an NDA) we need someone to formulate a cleaning product that can be applied to wet wipes. The product will need to be proven to not affect Nylon 6, Teflon or Spectra fibers, the proof should be both a strength test and a highly magnified visual comparison of the fibers before and after application. Qualifications You should have a masters or PhD in analytical chemistry or a related field. You will have previous experience in developing fluids for liquid wash and wet wipe applications. You will also have access to an appropriate and accredited testing lab. We will need to be able to use the lab/universities name in our marketing materials e...
Category: Chemical Engineering       
Skills: Chemical Engineering, Product Design       

w****dia
 [?]
Sign in to view client's details.
| w****dia
|    United States
Fixed Price: Not Sure   |  Posted: May 21, 2015  |  Ends: 13d, 19h  |   6 Proposals
ABOUT SEVA: We are an expanding Brazilian IIOT (Industrial Internet of Things) company, in need of a simple and small project from outside. We drift between many different areas: automobile automation, home automation, health devices, precision livestock farming and much more. ABOUT THE PROJECT: We need someone for a small project. The candidate should be able to provide high quality product within good price range and for a reasonable time. We need to develop our own barcode scanner. It should be provided the ELECTRONICS (SCHEMATICS), a LIST OF MATERIALS, a LIST OF SUPPLIERS and the PROTOTYPE . It's simply a barcode reader. Check the image and videos attached for more details. THOSE ARE THE SPECIFICATIONS: BarCode Reader 1. Optics requirements Image sensor resolution : 720 x 480 pixels Rotational sensitivity: 360 Viewing angle: 40 Ambient light: Total darkness to 100,00 lux (full sunlight) Illumination LEDS: 626nm 30nm Working range: 5.3 cm to 33.5 cm depend on bar...
Category: Electrical       

s****asa
 [?]
Sign in to view client's details.
| s****asa
|    Brazil
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 21, 2015  |  Ends: 88d, 18h  |   0 Proposals
We are looking for a manufacturer of aerosol paints, we require the manufacturer to produce from raw materials and supply the finished goods into our warehouse in the UK. We buy in very large volumes, please find some images attached of some of our most popular products.
Category: Contract Manufacturing       

t****est
 [?]
Sign in to view client's details.
| t****est
|    United Kingdom
Fixed Price: More than $10,000   |  Posted: May 21, 2015  |  Ends: 13d, 16h  |   1 Proposal
Field Service / Applications Engineer Company Work Location: Waukesha, WI Salary: $60,000 - $80,000 Job Description: Experienced Field Service / Applications Engineer is required having responsibility to Supports Sales by evaluating the Technical/Commercial feasibility of a tender and help to clarify customer inquiries and specifications. Requirements: ? Experience with Mitsubishi, Fanuc, and Siemens controls is critical. ? Min. 2-3 years working experience with Turbo-expanders and/or Compressors. ? 5 to 10 years of experience in design engineering, applications engineering, high technology sales support, or field service. ? Requires knowledge of API, ASME, NEC (or IEC) codes. ? Experience integrating automation and motion control components such as motors, feedback devices and servo drives and controllers ? Process design knowledge, experience reading and interpreting technical specifications, and familiarity with technical drawing sets. ? Ideally someone with experience in...
Category: Electrical       

P****era
 [?]
Sign in to view client's details.
| P****era
|    India
Fixed Price: Not Sure   |  Posted: May 21, 2015  |  Ends: 5d, 16h  |   10 Proposals
I'm looking for an architect who can not only refine my house design (actually very simple open plan) but offer practical guidance for the building of it. I know many architects don't get involved in practical issues and leave that to the main contractor but I'm looking for more comprehensive advice. My priorities are designing for simple and economic construction that i can mostly do myself as a non builder ( i have a reasonable theoretical knowledge). This house will eventually only be a guest house and will serve as the main house for the next 2-3 years while a bigger one is being built next to it. The house will be built on the foundation of an old log house I have just demolished. It will be approx 100m foot print and 1.5 stories, main floor plus attic bedrooms. I'm leaning towards an aerated concrete block wall system with roof trusses to form the roof and first floor structure (see attached). I'm hoping the design will allow for ceiling to floor windows. At first the enti...
Category: Architecture       
Skills: 3D Modeling, Architecture       

t****ki1
 [?]
Sign in to view client's details.
| t****ki1
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 20, 2015  |  Ends: 27d, 23h  |   2 Proposals
Our research and development firm seeks a Physicist PhD to conduct a simple table top measurement (using equipment we supply if not otherwise available to you) and to document the resulting data. More detail: (See attached picture) This table top test is comprised of two fixtures, one stationary fixture and another fixture that is moved by hand to incremental distances away from the stationary fixture. The stationary fixture facilitates an ion generator which disperses negatively (-) charged ions into the surrounding air (similar to a home air cleaner that uses an ion generation). The moveable fixture holds the material to be tested, in this case, the two materials to be tested are metal and carbon/graphite. The measurement procedure entails placing the moveable fixture at three distances (1ft, 2ft,3ft) away from the stationary fixture ion generator and making note of the readout displayed on the digital multimeter indicating each material's relative effectiveness at coupling to...
Category: Electrical       
Skills: Scientific Research       
Preferred Location: North America

I****ing
 [?]
Sign in to view client's details.
| I****ing
|    United States
Fixed Price: Not Sure   |  Posted: May 20, 2015  |  Ends: 21h, 32m  |   13 Proposals
Task - to do the analysis the 3D model (of the underground tank) 1. The tank is made of polyethylene (HDPE) 2. Two different thickness tanks and two different model (tank size) 3.1. Perform analysis for - the hydrostatic pressure (under certain conditions) 3.2. Perform analysis for - the hydrostatic pressure (which does not cause maximum destruction) 3.3 Perform analysis for - add to the hydrostatic pressure ground pressure 3.4 Additional force on ground picture below 4. Material tank (already defined and data are available) 5. 3D file will be made available, the file format to be agreed (STEP, IGES other what it's possible in SolidWorks - export) Please specify the price for the analysis of 3.1 and 3.2, the time of execution - i need results in monday 25.05.2015 In results i need sumary data : max force, pressure from weater level, screenshots from program or screenshots with some data i can send some example.
Category: CAD       
Skills: 3D Modeling, ANSYS, AutoCAD, SolidWorks       

g****roy
 [?]
Sign in to view client's details.
| g****roy
|    Poland
Fixed Price: Not Sure   |  Posted: May 20, 2015  |  Ends: 12d, 19h  |   12 Proposals
Dear Engineering, Our company have solution for self servicing printing. "Similar to the attachments" I am not engineering,I will explain what I want in-short. factory ask me to provide design so they can calculate price and manufacture kiosk. That mean we want design of kiosk concept from A to Z. Kiosk will have:- 2- PC computer " all in one " ( 1 for system - 1 for Advertising ) 2- Printers 1-Scanner. 1- Bill validator 1- USB Plug 1- UPS - Backup Battery We want 1- An attractive and distinctive design. 2- Design must be easy use for the user, to get printed pages, use scanner, enter bill and enter USB. 2- Since the kiosk supports cash payment - should be safe. 3- There must be flexibility in the installation and removal of printers, scanner and PCs. 4- Printers need to paper and ink daily, so it must be easy maintenance process. Since installation or removal not all time. 5- Preferably the device is divided - part of the money - part of the printers and scan...
Category: Product Design       
Preferred Location: North America, Western Europe, Eastern Europe, Australia/Oceania

I****ITY
 [?]
Sign in to view client's details.
| I****ITY
|    Saudi Arabia
Fixed Price: $500 - $1,000   |  Posted: May 19, 2015  |  Ends: 12d, 1h  |   21 Proposals
Arlo Skye is a startup. We are obsessed about bringing back desirability in luggage. We believe that luggage shouldn't just be a boring utility, but in fact a reflection of your appreciation of aesthetic and good taste. And we believe that all this should not cost you an arm or a leg. We are starting this journey by manufacturing a 2-wheeled and 4-wheeled Carry On. Currently, we have just finished finalizing the external design of the 2 wheeled and 4 wheeled carry on. We have developed the external and internal space design in 3D using solid works. We are now searching for a talented expert in CAD creation with an understanding of basics mechanical engineering. This means that you should be comfortable to understand wheel mechanisms, luggage frame structures and construction as well as how the telescopic handle in a carry-on works. And how it all works integrates together. This is a chance for you to make a real difference in peoples lives by designing something incredib...
Category: CAD       
Skills: 3D Modeling, AutoCAD, Manufacturing Design       

a****kye
 [?]
Sign in to view client's details.
| a****kye
|    United States
Fixed Price: $500 - $1,000   |  Posted: May 19, 2015  |  Ends: 12d, 0h  |   25 Proposals
To begin with we have not done this before, we have a background in sales, operations and marketing but have no background in engineering or product design. However we have an idea for a product which we would like to initially offer on Kickstarter. I'm not going to disclose the product we're working on until a contract has been awarded. We are going to require someone who has the skills to help us prototype and bring this to a stage where we can successfully mount a Kickstarter campaign: 3D design of a case to contain roughly 2" x 2" of a PCB board; We will be using off the shelf TI chips. I can provide a Bill of Material for those. Will be using either Bluetooth or Wifii - for discussion. Will need to develop IOS and Android app Help us to work out the total cost of bringing this product to market; Help with prototyping and manufacturing options; Please ask any questions you have
Category: Product Design       

C****057
 [?]
Sign in to view client's details.
| C****057
|    Canada
Fixed Price: Less than $500   |  Posted: May 19, 2015  |  Ends: 11d, 23h  |   7 Proposals
In need of a really experience material science expert to answer a few questions. very straight forward question as long as you have a good knowledge in the area required.
Category: Mechanical       

z****499
 [?]
Sign in to view client's details.
| z****499
|    Myanmar
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: May 18, 2015  |  Ends: 3d, 1h  |   23 Proposals
We are looking for someone who can draw architectural and interior cabinetry details for our projects, in AutoCAD. We mainly design restaurants but sometimes exterior details for a facade maybe required. We would provide interior plans, elevations and 3D model views. We would also provide some drawings of previous details example on CAD and/or sketches. Your job would be to produce sections of walls, cabinets, counters, soffits, benches and such, as needed. This will be hourly job per project. So we are looking for someone who wants to work a few hours a week to start with. Understanding of materials thicknesses, attachments and US measurements required. Previous experience in details required! Please reply with some example of a section through a wall and a counter that you have done before. Hourly payment may depend on experience and may go over of below what is shown here. Thank you and looking forward to your reply! EK
Category: Architecture       
Skills: Architecture, AutoCAD       
Preferred Location: North America

S****mes
 [?]
Sign in to view client's details.
| S****mes
|    United States
Fixed Price: Not Sure   |  Posted: May 18, 2015  |  Ends: 10d, 23h  |   9 Proposals
We need a device consisting of a microcontroller (such as Arduino) that will constantly monitor a voltage in the range of 0 to 3.3 V. When a voltage change is noticed, the microcontroller will wait until the voltage has stabilized to < 1% variation for at least 250 ms, and then send an RS-232 command at a baud rate of 115200 bit/sec. The command is in the form "P=Y.YYY" where Y.YYY is a number format with a value that ranges from 0.000 at an input voltage of 0V to 1.000 at an input voltage of 3.3 V, with a linear interpolation in between. The form factor is less than 7x7x2 cm. Input power is 24V provided through a BNC connector. It is preferable to use the RS-232D standard, with an RJ45 jack. The unit must start up and start functioning automatically when 24V power is applied. It would be good if we have the ability to reprogram the device simply on site in case we need to adjust some parameters. Supplier is responsible for procuring and assembling all parts, and...
Category: Other - Engineering &...       
Preferred Location: United States

C****100
 [?]
Sign in to view client's details.
| C****100
|    United States
Fixed Price: Less than $500   |  Posted: May 18, 2015  |  Ends: 10d, 20h  |   24 Proposals
I am looking to get a professional design of some exercise equipment I'm trying to build similar to a door frame pull-up bar. This project will require 3D design experience, force diagrams, experience in different materials (likely to be some sort of steel but I'm open to other suggestions) and some creativity for improvement on design and minimizing cost of production. Once a free-lancer is selected, I will share my current drawings/ideas (though I expect you will have improvements from a technical standpoint) and notes on this for your improvement and modeling.
Category: Product Design       

j****rin
 [?]
Sign in to view client's details.
| j****rin
|    United Arab Emirates
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job