Save this Search
     
Sort by:
  • Posted Date
Posted: Within 7 days
Fixed Price: Less than $500   |  Posted: 1h, 28m ago  |  Ends: 14d, 22h  |   2 Proposals
need sheet/pipe optimization, DWG file for product. I need this optimization for 100pc and 150pc and what max of parts vs sheet/tube material ratio. compensation is $35
Category: Other - Engineering &...       
Skills: SolidWorks       

P****ock
 [?]
Sign in to view client's details.
| P****ock
|    United States
Fixed Price: Not Sure   |  Posted: 3h, 44m ago  |  Ends: 14d, 20h  |   3 Proposals
I need to build additional rooms in my house. Currently it has only the following: - 1 living room, dining room and kitchen - 1 bathroom - 1 bedroom I am going to build the following additional rooms: - 1 bedroom - 1 garage for 1 car next to a covered patio. It will be also used as a casual dining room when I receive a lot of guests: it must be about 3.5 meters x 6 meters. - Working room: I work from home with my computer and I need a separate room. In the pdf attached, you can see the actual floor plan. After a bid is chosen, I will submit a DWG file with the current floorplan. Your task will be to submit sketches (proposals) of the additions and I will choose the one I like most. I already have a design in mind, but I would like to see your ideas. After one sketch is chosen, you will have to submit Autocad DWG files with the final floor plan, and PDF exports of the files. Since the house is located in Argentina, your house plan doesn't need to comply with all local building co...
Category: Architecture       
Skills: Architecture, AutoCAD, Interior Design       

z****ica
 [?]
Sign in to view client's details.
| z****ica
|    Argentina
Fixed Price: Not Sure   |  Posted: 8h, 35m ago  |  Ends: 6d, 15h  |   21 Proposals
Hi, I'm looking for 3D models that I can use to build a prototype. There will be about 4 pieces for the first concept I believe (I included a rough mockup, and put an 'x' on the parts I'm not interested in at this time). Its actually for a 'smart' product in the end, but this phase 1 concept will not include the electronics, just the housing. Once I get that right, I'll move into working with the electronics. Also, if it matters, product weight is not an issue. If anything I'd prefer it to be heavier than lighter. I'm looking for someone who has lots of experience in 3D modeling, specifically for parts being 3d printed, but would prefer someone who also understand materials as well as means & methods for production. Please be as descriptive as you can in your proposal, as I have never done anything like this before.
Category: Product Design       

M****ing
 [?]
Sign in to view client's details.
| M****ing
|    United States
Hourly Rate: $30 - $40 / hr   |  Duration: 7-9 months  |  Posted: 8h, 55m ago  |  Ends: 14d, 15h  |   2 Proposals
We are seeking candidates with design experience in envelope improvements and retrofits, as well as M/E/P systems in both the single- and multi-family residential environment. Candidates should have knowledge of energy efficient technologies associated with commercial/residential building systems to support energy efficiency program efforts, including design, development and delivery services. Ideal candidates should also have design management experience and the ability to coordinate the development of building plans, contracts, regulations and specifications. Position Responsibilities: ? Organize and execute sustainable design initiatives within the context of Mechanical, Electrical and Plumbing (M/E/P) systems. ? Provide design coordination and administrative oversight of all design phase activities. ? In concert with the Design Team, coordinate the development of the mechanical and electrical drawings with the architectural plan set for new and/or existing buildings. ? Assist with...
Category: Mechanical       

j****nin
 [?]
Sign in to view client's details.
| j****nin
|    United States
Hourly Rate: $10 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: 9h, 4m ago  |  Ends: 14d, 14h  |   7 Proposals
I need an engineer familiar with plastics to advise me on which material; plastic, polypropylene, or alternative will yield the qualities I need in terms of flexibility/rigidity for my product. I have CAD drawings, 3D Printed prototypes, and detailed docs explaining the product needs. I may need a slight redesign based on the material chosen, but need to be advised on what change would be relevant in order to keep the functionality and aesthetics of the product. The design needs to be able to be manufactured using bulk manufacturing techniques. I have more attachments and detailed docs than the one attached here, but would like to get in touch with someone prior to providing all intellectual property.
Category: Product Design       

a****kle
 [?]
Sign in to view client's details.
| a****kle
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: 9h, 24m ago  |  Ends: 14d, 14h  |   1 Proposal
i want to know what materials are used for what best job, also to give proper refferencing and evidence to support your words
Category: 3D Modelling       
Skills: SolidWorks       

r****ldo
 [?]
Sign in to view client's details.
| r****ldo
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: 15h, 17m ago  |  Ends: 14d, 8h  |   7 Proposals
You will be converting 5 excel spreadsheet into a usable access database with reports and queries. You will be creating a raw material planning / procurement tool that will feed a purchasing plan. This tool will take into leadtimes, different material grades and supply source
Category: Other - Engineering &...       
Skills: Manufacturing       

u****927
 [?]
Sign in to view client's details.
| u****927
|    United States
Fixed Price: $5,000 - $10,000   |  Posted: 17h, 53m ago  |  Ends: 2d, 6h  |   12 Proposals
NEED ONE PERSON OR GROUP TO PROVIDE MECHANICAL, ENGINEERING, AND PROGRAMMING FOR DESIGN AND DEVELOPMENT OF A CONSUMER PRODUCT. IF YOU DON'T HAVE A TEAM THAT CAN PERFORM ALL THE SERVICES, THEN DON'T BOTHER TO BID! PLEASE VISIT OUR WEBSITE AT   [obscured]   to find out more. DO YOUR HOMEWORK AFTER READING THE SITE. BIDS WILL NOT EXCEPTED IF YOU DID NOT REVIEW THE SITE AND STUDY IT. IT WILL SHOW HOW REAL YOU ARE. PLEASE TAKE A LOOK AND PROVIDE THE BIDDING. WHAT YOU WILL PROVIDE TO US: 1. 3D CAD MODEL 2. 3D CAD ASSEMBLY 3. 2D DRAWING WITH GENERAL DIMENSIONS ND SPECIFICATIONS READY FOR MANUFACTURING 4. 2D DRAWING OF THE ASSEMBLY WITH BOM (BILL OF MATERIAL) 5. 2D DRAWING FOR PATENT APPLICATION 6. ELECTRONIC PCB 7. SOFTWARE
Category: Mechanical       

g****ben
 [?]
Sign in to view client's details.
| g****ben
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Apr 23, 2015  |  Ends: 13d, 10h  |   9 Proposals
Galaxie Home is currently seeking a project estimator in the home construction field to help with remodeling quotes; Our Project Estimator will have the following traits, skills and experience: ? 2 ? 3 years of residential construction experience and/or a degree in construction management ? Excellent pricing skills and experience, preferably with kitchen and bath remodeling or construction projects ? The ability to determine accurately estimate quantities of required materials and labor for all improvements from design concept ? The ability to effectively manage and prioritize multiple simultaneous projects ? Experience using excel and proficient in mathematics Ideal candidate backgrounds: - Estimating - Pricing - Home Improvements - Bathroom Design - Kitchen Design - Windows - Doors - Porches - Siding - Construction - Construction Management
Category: Other - Engineering &...       

s****ara
 [?]
Sign in to view client's details.
| s****ara
|    United States
Fixed Price: Less than $500   |  Posted: Apr 23, 2015  |  Ends: 28d, 9h  |   4 Proposals
This job consists in making a working prototype of a patented silent vibrating alarm. Please use materials that are lightweight and are comfortable to wear and do not have the potential of injuring the person. The wristbands can be made of an elastic mesh with velcro to fasten them and the watch can be encased in a rubber or foam to prevent injury. Thank you! By accepting this job, the person waives all rights to the work, will not disclose any information pertaining to the project, will not compete, and will not seek any further compensation. Thank you!
Category: Other - Engineering &...       

a****236
 [?]
Sign in to view client's details.
| a****236
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Apr 22, 2015  |  Ends: 4d, 21h  |   9 Proposals
I would like to build a shooting range within shipping containers. The trap for the bullets is to be a snail design to handle rounds upto and including 7.62mm Nato (.308). Material for the trap will be AR500 steel plate. Will also need to have ventilation in/out flow for users of the range.
Category: Other - Engineering &...       

B****tes
 [?]
Sign in to view client's details.
| B****tes
|    Australia
Hourly Rate: $30 - $40 / hr   |  Duration: 7-9 months  |  Posted: Apr 22, 2015  |  Ends: 12d, 13h  |   4 Proposals
Responsibilities o Provide technical support related to concrete production and construction process including promoting adequate use of guidelines and the implementation of best practices: assist jobsites in the evaluation and optimization of the mix designs and selection of materials; review pre-and post-bid concrete documents including mix designs, specifications, quality procedures, etc.; advice on new improved technologies; and troubleshoot concrete production and construction. o Monitored the quality of aggregates and production of ready mix concrete, evaluate aggregate properties and quality of potential sources of raw materials, designed concrete mixture proportions, perform site inspections, repairs and non-destructive field testing, evaluated structural properties and capacity of building materials, investigated and implement new products, perform feasibility studies, developed new materials technologies, coordinate concrete sampling and testing for different constru...
Category: Civil & Structural       

o****rog
 [?]
Sign in to view client's details.
| o****rog
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 22, 2015  |  Ends: 12d, 10h  |   12 Proposals
We are a landscape architecture firm focused on design gardens for residential homes. Our gardens include plant materials, buildings, hardscapes, etc. We require a CADD conversion specialist who is familiar with landscape projects, landscape construction, drafting of the landscape elements. Drafting of buildings, indoor and outdoor kitchens, etc. We also require excellent communication skills, utilization of Dropbox, delivery of product in AutoCAD and PDF. The ability to calculate quantities, research provided websites for plant photographs and other materials, is essential. The ability to converse fluently in English is a must. Work to require CAD conversion of red lined drawings through multiple drafts and revisions. Work may require research of materials and or stock photos for the drawing presentable completion. Please submit photos. Background in landscape architecture or landscape design is beneficial but not a must. Additionally. The ability develop 3d drawings in black and w...
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

e****001
 [?]
Sign in to view client's details.
| e****001
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 3-4 weeks  |  Posted: Apr 22, 2015  |  Ends: 12d, 5h  |   7 Proposals
Product designer required to work on camping tent for light leisure use. Familiarity and experience of designing with textiles for outdoor use is required. This is a short-term project to provide detailed designs and specifications from initial ideas and sketches which will later become a finished consumer product. All applicants must supply examples of their work and be fluent in English. We have some specifications on look, feel, materials, shape and cost as a starting point for you. The aim of this job is to provide 3D realizations of the tent and detailed specifications (e.g. the cutting pattern) from these such that the tent can be made into a finished product ready for use. More details will be made available to suitable candidates.
Category: Product Design       
Skills: 3D Modeling, Product Design       
Preferred Location: North America, Western Europe

m****nio
 [?]
Sign in to view client's details.
| m****nio
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 22, 2015  |  Ends: 12d, 2h  |   10 Proposals
Hello, I am looking for design help with making a soft goods prototype to use for customer testing. My product is to be used on car seats, strollers, and high chairs. So far, I have made a rough prototype out of everyday materials to test for functionality but now I am looking for an aesthetically pleasing model in which all kinks are worked out. Please detail your approach to jobs similar to this one. I'm ready to get this project started right away. I look forward to speaking with you.
Category: Product Design       

L****ard
 [?]
Sign in to view client's details.
| L****ard
|    United States
Fixed Price: Less than $500   |  Posted: Apr 21, 2015  |  Ends: 11d, 21h  |   2 Proposals
We want help researching and identifying a readily available material to use in our food warmers for safely transporting and maintaining temperature of hot meals. Should perform the function similar to this -   [obscured]  /itm/Cambro-250-311-Portable-Warmer-Plate-For-Food-Pan-Carts-1-Each-/261619794826. We have heard of using basalt tiles, fire clay bricks, soapstone and need advice on the most cost-effective solution. We have also been warned of chemical burn-off, or potentially explosive stones so please consider these and other possible hazards. These materials will be heated to ~450 degrees F for 45-120 minutes on a daily basis. They should encourage minimal heat loss in a Cambro style brown box for 3 - 6 hours. Requirements: 1. Appropriate for use alongside food products 2. Lowest cost (i.e. pizza stones or retail cooking stones are too costly to consider) 3. Durable for use in daily transport from oven to food warmers 4. Easy to clean (prefer non-porous or method t...
Category: Other - Engineering &...       

b****din
 [?]
Sign in to view client's details.
| b****din
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 21, 2015  |  Ends: 11d, 21h  |   6 Proposals
We need to design a small device to open the lid of a clam shell shaped box that contain semiconductor wafer in a cassette. Since this will be used in high level "Clean Room" we can use only motor or vacuum pneumatic devices since other motion device may generate dust particles. We can advise how to design and what device or materials to use in general. There are other requirements such as small volume is allowed. Please see attached photo of the box and lid.
Category: Mechanical       

r****sol
 [?]
Sign in to view client's details.
| r****sol
|    United States
Fixed Price: Less than $500   |  Posted: Apr 21, 2015  |  Ends: 11d, 18h  |   13 Proposals
I'm having quite a bit of difficulty finding someone or somewhere to manufacture my small accessories. All of my products need to have a transparent plastic look. I will include some attachments of what I'm trying to identify and find a manufacture for. I hope someone here can do the job or perhaps point me in the right direction. As you can see in the first photo the accessories are small and I have 3D printed some samples and have acquired the shapes I am looking for but require them to be in the material that is in the sunglasses photo which there is actually polycarbonate but I'm not sure if I can print the other product in this material and where I can have large quantities produced. Therefore here I am.
Category: Contract Manufacturing       

b****la1
 [?]
Sign in to view client's details.
| b****la1
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 21, 2015  |  Ends: 11d, 16h  |   6 Proposals
Need a materials engineer to help design a new product. Experience with sound proof/sound reduction materials useful. Payment negotiable.
Category: Product Design       
Preferred Location: United States

A****NYC
 [?]
Sign in to view client's details.
| A****NYC
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 3-4 weeks  |  Posted: Apr 21, 2015  |  Ends: 11d, 15h  |   6 Proposals
Using OpenFOAM, develop a model to simulate the laser ablation process. The equations and model examples are shown in the attachment.
Category: Other - Engineering &...       

y****ser
 [?]
Sign in to view client's details.
| y****ser
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 21, 2015  |  Ends: 11d, 12h  |   8 Proposals
I am looking for an engineer to design a cigar humidor. I will give out more information after i select certain candidates. You must be fluent in English and have a portfolio to show me. Any experience designing with wood helps as well.
Category: Other - Engineering &...       

m****kol
 [?]
Sign in to view client's details.
| m****kol
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 21, 2015  |  Ends: 11d, 8h  |   7 Proposals
We have a few jobs which require a dedicated experienced estimator who can complet material takeoff estiamtes and provide indicitive construction hours for exhibition stand display construction. The role would be suited to someone with previous experience in custom joinery or exhibition/museum or shopfitting style takeoffs. You will need to provide qty takeoffs for the following material types: - MDF - laminate - 2 pak - glass - painting - digital print graphics Please send me examples or information on your previous experience. Joel
Category: Interior Design       
Skills: ArchiCAD, estimating       

I****cus
 [?]
Sign in to view client's details.
| I****cus
|    Australia
Fixed Price: Less than $500   |  Posted: Apr 21, 2015  |  Ends: 11d, 2h  |   49 Proposals
Good morning, I need to make some vizualization and renders of building. I give you a 3d model. What i need to make: - few exterior vizualization - basic render with postproduction of atmosphere and stuffs like trees, grass and people. (about 4pieces) (min 2000x1414px) - little bit more interiror vizualization - better render with more precised materials and less postproduction (about 10 renders) Expenses for render farm will be paid.
Category: Architecture       

l****ala
 [?]
Sign in to view client's details.
| l****ala
|    Czech Republic
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job