Save this Search
     
Sort by:
  • Posted Date
Payment Verified
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Mar 26, 2015  |  Ends: 11d, 22h  |   7 Proposals
We are looking for a revit architecture user experienced with incorporating functionality to create a single dynamic model that would then allow us to generate multiple models based on defined constraints provided in MS Access. The model itself would be fairly simple (rectangular building massing - generic walls with no fenestration or materials). User defined constraints would include typical dimensions such as setback from property line, floor height, number of floors, size of garage, etc. Data to be extracted form models includes property and floor areas. Initially we would like to start with only a single family house on a lot - depending on how this goes, more work would likely follow for other building templates. Ideally we would like to achieve this with 'out of the box' Revit tools but may require Dynamo (to be determined but knowledge of Dynamo an asset). Thank you
Category: Architecture       

D****118
 [?]
Sign in to view client's details.
| D****118
|    Canada
Fixed Price: Not Sure   |  Posted: Mar 25, 2015  |  Ends: 11d, 6h  |   10 Proposals
Need an Architectural Draftsmen, use computer-aided design and drafting (CADD) software to translate architectural and engineering designs into technical plans that include information about construction procedures, design dimensions, materials and structural details. Associate's degree in Architectural drafting, Architectural design technology Knowledge of CADD, building information modeling (BIM) and product data management (PDM) software.
Category: 3D Modelling       

W****NG5
 [?]
Sign in to view client's details.
| W****NG5
|    United States
Fixed Price: $25 - $45   |  Posted: Mar 25, 2015  |  Ends: 10d, 23h  |   22 Proposals
We are looking for a talented creative to take this conceptual product, and make it real through 3d modeling. You will be provided sketches, marked up photos, and written instruction for creations of a "Spoon Rest". From this we need you to create the 3D model, and create 10 iterations with different materials. Your deliverables will be the 3D files of the 10 versions. In summary, you will need to create one 3D model and then you will need to apply 10 different material versions to that model, and send them in individual 3D files, and as one PDF document.
Category: 3D Modelling       

D****ies
 [?]
Sign in to view client's details.
| D****ies *
|    United States
Fixed Price: Not Sure   |  Posted: Mar 24, 2015  |  Ends: 10d, 11h  |   14 Proposals
Seeking contract manufacturer to create custom recreational product. I have final drawings and prototype. Material list includes 2" steel tubes (very minor welding / bending / machining), 12" rubber wheels (2), plastic end caps and coating. An extra bonus would be for company who could also provide packaging and shipment for large orders. First order will be in the 100-300 qty range.
Category: Contract Manufacturing       
Skills: Manufacturing       

W****gns
 [?]
Sign in to view client's details.
| W****gns
|    United States
Fixed Price: Less than $500   |  Posted: Mar 24, 2015  |  Ends: 10d, 5h  |   18 Proposals
I am building my basement and looking for a fancy design. It is fairly medium size and I need to design the basement. I want to have a media room with nice columns, and look like theater room, a wetbar with some stone or brick accent, and a bedroom with modern look with several modern items. Project scope/ desired output: - floor layout: I have the existing drawing but need to finalization of new layout - bathroom design: one new bathroom, one redesign both need material selection - Theater room should have some level of soundproofing so sound will travel less - walls: new wall design including colors/ accents with modern - lighting: light concept for apartment, - Wetbar with stone or brick accent and accent lighting.
Category: Interior Design       
Skills: 3D Modeling, Interior Design       

S****hit
 [?]
Sign in to view client's details.
| S****hit
|    United States
Fixed Price: Not Sure   |  Posted: Mar 24, 2015  |  Ends: 10d, 3h  |   1 Proposal
Hello, I'm looking to work with someone that specializes in pigment preparation, selection, inspection, etc. for various industries. I'm primarily seeking assistance with preparing dispersions for coatings as well as cosmetics however, I need to be able to talk with an expert to fully understand the ideal ways to prepare them from dry material. There are numerous other questions I have about specific types of pigments related to photoreactivity, weight, suspension, finish, achieving solutions or proper suspensions, etc. If this is your area of expertise, I'm happy to pay you for your time so that I can learn a bit more about how to proceed with my projects. I'll share more details in private of course. Thank you.
Category: Other - Engineering &...       
Skills: Acrylic Painting, Chemistry       

t****525
 [?]
Sign in to view client's details.
| t****525
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 24, 2015  |  Ends: 9d, 19h  |   12 Proposals
We are a landscape architecture firm focused on design gardens for residential homes. Our gardens include plant materials, buildings, hardscapes, etc. We require a CADD conversion specialist who is familiar with landscape projects, landscape construction, drafting of the landscape elements. Drafting of buildings, indoor and outdoor kitchens, etc. We also require excellent communication skills, utilization of Dropbox, delivery of product in AutoCAD and PDF. The ability to calculate quantities, research provided websites for plant photographs and other materials, is essential. The ability to converse fluently in English is a must. Work to require CAD conversion of red lined drawings through multiple drafts and revisions. Work may require research of materials and or stock photos for the drawing presentable completion. Please submit photos. Background in landscape architecture or landscape design is beneficial but not a must. Additionally. The ability develop 3d drawings in bla...
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

e****001
 [?]
Sign in to view client's details.
| e****001
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: Mar 23, 2015  |  Ends: 1d, 10h  |   12 Proposals
I need to prepare a Historic Preservation Office submittal package for an addition to a historic home in Phoenix Arizona. This will consist of a set of Design Development Drawings, including Site Plan, Floorplan, Roof Plan, Elevations, and material documentation. Once approved by the HPO, I will extend this job into complete construction documents. AutoCAD 2D and SketchUp proficiency required.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD, SketchUp Pro       
Preferred Location: North America

A****nAZ
 [?]
Sign in to view client's details.
| A****nAZ
|    United States
Hourly Rate: $30 - $40 / hr   |  Duration: 7-9 months  |  Posted: Mar 23, 2015  |  Ends: 9d, 2h  |   18 Proposals
I have attached an image of vision. I have conducted a lot of researching of making this come to life however I Need someone who can turn this into a prototype and help me with an detail diagram of the creation. I have provided with some of the materials I need. I am looking for enegineers who think they are about to make this come to life. I need someone who is ambitious and can be creative to make things work. If this is you please respond with why you and what you can add. Please read the rest of the discription I am looking forward to hearing from you. P.S If I find you a good match for this project we can talk equality stake and other options thanks. Concept of a vehicle to travel through the water with ease and speed. Inexpensive materials to keep the cost low which would be the housing unit. The unit would cover it's wearer from head to the lower torso. The housing unit would need: power source motor propulsion unit sonar computer systems/ with displays d...
Category: Product Design       

w****290
 [?]
Sign in to view client's details.
| w****290
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 20, 2015  |  Ends: 6d, 1h  |   36 Proposals
Hello Elance-ers! I am looking for assistance with a product redesign. It is a patented consumer product (a toy), made from injection-molded plastics and utilizes LEDs for illumination. I am looking for a designer with experience with consumer products, LEDs, plastics and molding, and manufacturing to optimize the design for low-cost production. Apologies for the vague posting - will share details, drawings, prototypes, and BOM with qualified candidates. Looking forward to your response. Thanks, Will
Category: Product Design       

w****ell
 [?]
Sign in to view client's details.
| w****ell
|    United States
Fixed Price: Less than $500   |  Posted: Mar 19, 2015  |  Ends: 4d, 18h  |   3 Proposals
I have a project which requires a polyurethane wheel to run with a smooth, vibration-free fit on a Dia 40.0mm tube. I need you to find at least 2x suppliers (preferrably 3x or 4x) that can sell me a wheel with the following specs. I need price for 1x piece, 16x pieces and 160x pieces. I do not mind if these are from Australia or other country - but Australian supplier is my 1st preference because of lead time and service. Wheel specs are: - OD= Min 30mm, max 75mm (around 50mm is ideal). - Width= Min 10mm, max 30mm (around 20mm ideal). - Rolling surface profile (not flat), radius of 20mm (to run snug on 40mm Dia tube). - Includes bearing. Hub size of bearing doesn't matter. - Material Polyurethane. Other soft and smooth running materials would be considered, but from experience PU is the best material for this job. (if a spec is not mentioned then it is flexible and can match whatever is available). Some smart googling should help you find suppliers. You may be asked for drawing...
Category: Other - Engineering &...       
Skills: Drawing, Drafting, sourcing       

s****eys
 [?]
Sign in to view client's details.
| s****eys
|    Australia
Fixed Price: Not Sure   |  Posted: Mar 19, 2015  |  Ends: 4d, 13h  |   15 Proposals
We have a lifting beam that we seek to be rated to a working capacity of 5 tonnes (5 tonne SWL). An initial design assessment is to be provided to attempt to confirm a 5T SWL. If this assessment proves the SWL to be less than 5T, the assessment will continue to be performed to confirm the SWL, which can be rounded down to the nearest 0.5T increment. Knowledge of Steel Design and Standards is necessary so appropriate load factors are incorporated into the design, such as the critical load cases and proof test loads. Material grades and dimensions have been provided in the attached word document - please refer to this document. We seek for someone to perform the design calculations and provide a detailed report showing justification of the design. If there are any further questions, please ask, thanks.
Category: Civil & Structural       

F****Eng
 [?]
Sign in to view client's details.
| F****Eng
|    Australia
Fixed Price: Not Sure   |  Posted: Mar 18, 2015  |  Ends: 4d, 8h  |   7 Proposals
Hello, Looking to have standard pill bottle and cap printed using PP materials. Specially, white cap and orange bottle. Thanks, Don
Category: Other - Engineering &...       

s****don
 [?]
Sign in to view client's details.
| s****don
|    United States
Fixed Price: Less than $500   |  Posted: Mar 17, 2015  |  Ends: 3d, 9h  |   17 Proposals
**Must have consumer hardware development experience** Goal is to have (1) 2D and 3D designs and (2) prototype a telescoping apparatus with locking sections when fully extended with internal weighting toward distal end. No less than 15" when compact, extend to no more than 30" in total length. It is important that the locking system, allowing the sections to extend and lock, is simple and consumer-friendly...be creative! Must also lock all sections in place when compact too. Materials must be lightweight and durable - graphite, carbon fiber or equivalent. Engineers to submit time and budget proposal. More details and measurement will given to selected partner.
Category: Mechanical       

j****g10
 [?]
Sign in to view client's details.
| j****g10
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 17, 2015  |  Ends: 2d, 23h  |   10 Proposals
Start up looking to hire freelance product designer to assist in creation of a children's shoe accessory. Will need to be able to advise on appropriate materials and production processes as well as produce detailed, digital 3D drawing(s) and specifications for prototyping. Ideally looking for a designer to stay on for prototype creation and testing. Fashion accessory/jewelry design experience preferred. Please note that you will be asked to sign a non-disclosure and all intellectual property stemming from this working relationship will be owned by our company.
Category: Product Design       
Preferred Location: United States

K****NYC
 [?]
Sign in to view client's details.
| K****NYC
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 16, 2015  |  Ends: 2d, 11h  |   30 Proposals
We are looking to engage a solidworks designer who can interface existing system drawings for an automated fabricated structural steel production line with newly developed processes. The designer will need to have strong automation design experience including materials handling, conveying systems and be familiar with robotics environments. Also it would be beneficial if the designer had experience in developing production platforms for structural steel fabrication. If you fit this description please contact me with your experience details, rates and availability.
Category: 3D Modelling       
Skills: SolidWorks, Automation       

h****ley
 [?]
Sign in to view client's details.
| h****ley
|    Australia
Fixed Price: Not Sure   |  Posted: Mar 16, 2015  |  Ends: 1d, 23h  |   25 Proposals
We want to design a small metal Hanger 20 m 15 m with a height of 5 M. Therefore we need the drawings of all details and joints to be welded and screwed. We will use 0.6 mm metal sheets 1m x 1m. We think IBeam 20 os good but not sure. We want the least thickness possible of material to spare as much cost as possible. Attached is an approximate scketch of the struture. What is needed to be designed is only the Steel structure that would support the sheet metals roof and side ( I- Ibeams and C-beams). Beams to be tightened with each other using screws.
Category: Product Design       
Skills: 3D Modeling, AutoCAD, Manufacturing Design       

s****975
 [?]
Sign in to view client's details.
| s****975
|    Jordan
Fixed Price: $1,000 - $5,000   |  Posted: Mar 09, 2015  |  Ends: 5d, 23h  |   7 Proposals
We want to develop an analyzer which can determine the amount of chlorine in a water sample. The reagent DPD is used to determine the total chlorine in water. A cheap spectrometer is required to be built for its working.
Category: Product Design       

g****gla
 [?]
Sign in to view client's details.
| g****gla *
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 06, 2015  |  Ends: 6d, 13h  |   62 Proposals
Our company provides safety services for clients around the globe. We are a global company with 27 offices in 12 countries. We are looking for a Solidworks designer or design team that can help conceptualize and model and draw up existing and future products. The products are typically a fabrication type construction, usually manufactured from aluminum or stainless steel. Products are industrial in nature. Items such as industrial enclosures, air compressors, industrial vehicles, industrial trailers, electrical panels, vehicles, meterology equipment, piping systems, breathing air equipment, gas detection equipment, etc. There will be a requirement for some development of more complex systems such as pneumatic controls and actuators. The candidate or team must have an excellent grasp of weldment drawing mechanical systems, machining processes Solid models must use proper drawing techniques and sketch and solid relations, and an automated drawing template. Proper materials will be re...
Category: Product Design       
Skills: CorelDraw, SolidWorks       

A****yKv
 [?]
Sign in to view client's details.
| A****yKv
|    Canada
Fixed Price: Less than $500   |  Posted: Feb 28, 2015  |  Ends: 1d, 9h  |   8 Proposals
Description: We are going to develop a project for an Automatic Pay parking tickets. The dimensions are already agreed with the company and the material to be used is sheet metal. The designer will have to present the Automatic Pay parking tickets as new product concept to be introduced on the market, and then designed in 3D with the necessary views, sections, and rendering images. Finally yet importantly, the designer has to present the drawings of sheet metal techniques for the engineering for the prototype. ''We want to go to create a project team that will strengthen after this project. I need people with great attention to detail and have great creativity of thought and ideas. This pilot project will be a business card for a beautiful future reality, if I look at the future there will be new interesting projects looking forward. In my idea of team, it is not only related to this project, but I want to build a team of excellence, ready to challenge the market in the Hi tech. I wa...
Category: Product Design       

c****ign
 [?]
Sign in to view client's details.
| c****ign
|    Italy
Fixed Price: Not Sure   |  Posted: Feb 07, 2015  |  Ends: 1d, 23h  |   7 Proposals
I am in a search for a 'partner' for my numerous ideas and projects involving materials manufacturing. What I need is someone meeting most of the following criteria: Language: English [excellent writing and speaking] Science: Chemist or Chemical Engineer or other closely relevant field Laboratory status: Owner or with access to a chemical lab Location: Anywhere Educational level: PhD is desirable, not a requirement Experience: analytical chemistry, polymers, formulations Other details will be discussed after a first contact is made. I am looking for a long term co-operation on a freelancing basis. Please include a CV when contacting me.
Category: Chemical Engineering       

m****kis
 [?]
Sign in to view client's details.
| m****kis
|    Greece
Fixed Price: Not Sure   |  Posted: Jan 22, 2015  |  Ends: 2d, 4h  |   0 Proposals
Need good research to know which countries worldwide you may grow Industrial hemp. In specific in Ecuador, Bosnia and Croatia. Prices of Agricultural good land in Ecuador (Manabi province). Prices per m2 and is it possible to build a small house say max 200 m2 on 1 hectare (10.000 m2) Need also someone who is very knowledgeable on domes in all its variations. Wooden domes, bamboo domes, normal domes, geodesic domes. Must be from Ecuador someone who also can do CAD, and can or knows someone who can conduct the whole process, from foundation to building an can gvie me an estimate of total price. Also permits, timespan, etc.
Category: Other - Engineering &...       

f****i67
 [?]
Sign in to view client's details.
| f****i67
|    Netherlands
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job