Save this Search
     

All JobsMechanical Engineering

 (9,522 results)  
Sort by:
  • Posted Date
Fixed Price: Less than $500   |  Posted: 24 minutes ago  |  Ends: 1d, 23h  |   0 Proposals
Hey, I need an initial solidworks model of the attached system, so my factory can estimate cost. Further till complete engineering work will follow, at this stage a gross model will suffice. Please let me know if its do able I want technical expert only and he/she should be quick communicator Many thanks!
Category: Mechanical       

a****294
 [?]
Sign in to view client's details.
| a****294
|    Pakistan
Fixed Price: $1,000 - $5,000   |  Posted: 2h, 28m ago  |  Ends: 14d, 21h  |   4 Proposals
We are looking for an MEP engineer who can work with us on a project to project basis for production of detailed MEP drawings. The details to include HVAC and ventilation drawings with heat load calculation Fire Fighting drawings Fire Suppression system details Water supply and drainage drawings Electrical drawings with circuit and Load Distribution schedule Detailed BOQ for contractor Please revert back with your details of charges, time frame required etc.
Category: Mechanical       

h****nid
 [?]
Sign in to view client's details.
| h****nid
|    United Arab Emirates
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 3h, 58m ago  |  Ends: 29d, 20h  |   1 Proposal
I am trying to implement a similar design for a built-in air pump that you see in air mattresses that auto inflate upon switching on pump (picture attached). It will have to be welded (or HH-66) into the air mattress design which is made of vinyl coated polyester.
Category: Mechanical       

p****kb8
 [?]
Sign in to view client's details.
| p****kb8
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 7h, 16m ago  |  Ends: 14d, 16h  |   0 Proposals
Charity open water swim 8/15/15. Need waterproof individual ankle or wrist timing device for participants swimming 2.4 mile race in 70 degree lake. Start and finish line same location.
Category: Electrical       

t****tis
 [?]
Sign in to view client's details.
| t****tis
|    United States
Fixed Price: $500 - $1,000   |  Posted: 7h, 39m ago  |  Ends: 14d, 16h  |   8 Proposals
Need someone professional in mechanical desgns to design me some shafts info and requirements :   [obscured]  /wp-contents/Info.rar
Category: Mechanical       

D****yra
 [?]
Sign in to view client's details.
| D****yra *
|    Pakistan
Fixed Price: Not Sure   |  Posted: 9h, 27m ago  |  Ends: 29d, 14h  |   0 Proposals
- Must be experienced in Purchasing function - Graduate of Mechanical Engineering or Electrical Engineering - Male or Female - Computer-literate - 18 to 35 years of age - Must be willing to work in Cabuyao, Laguna - Must be willing to travel
Category: Other - Sales & Marketing       
Skills: Sales, Purchasing       
Preferred Location: Philippines

c****wer
 [?]
Sign in to view client's details.
| c****wer *
|    Japan
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 11h, 4m ago  |  Ends: 14d, 12h  |   7 Proposals
The current version of the device is fairly basic, stands about 12 inches tall and contains 18 total parts. The basic features/movements of the device are simple, but the current components are unnecessarily complex. I want to re-design the prototype to be more streamlined and simple. I had a prototype done in SLA and have previously had individual device parts 3D printed in ABS. I would like to work with someone who: 1) is capable of helping envision a new design that simplifies aesthetics while improving function; 2) is capable of using software to actualize these design(s) so they can be prototyped and tested; 3) can provide ideas on manufacturing optimization (tooling, CNC, 3D print, etc.) at different stages of development; 4) can show they will hold my work in strict confidence. I look forward to working with you! -Camden
Category: Product Design       

c****ong
 [?]
Sign in to view client's details.
| c****ong
|    United States
Fixed Price: $200 or less   |  Posted: 12h, 45m ago  |  Ends: 14d, 11h  |   9 Proposals
This is a thermocouple adaptor assembly. Don't let the name throw you. The issues are mechanical only and involve thread breakthroughs and interferences only. Below you will see a breakdown of what needs to be done to accomplish the redesign. Here are the two things that need to be done. The Solidworks assembly is attached. Maintain the folder structure as you are working on it. We will take your folder and replace our folder when you are finished. 1. The threaded section running horizontally into the adapter body for the Teflon cap to thread in to must not interfere with the vertical holes made to mount the adapter body to the top of the rotor or to attach the bottom plate to the adapter body. Either the number of mounting screws would need to be reduced or the placement of all 3 features must be reworked to allow all 3 to coexist without collision. 2. The counter bore for the thumbscrew currently breaks through the top edge of the adapter body. If an even larger diam...
Category: CAD       
Skills: 3D Modeling, SolidWorks       

r****ing
 [?]
Sign in to view client's details.
| r****ing
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 13h, 12m ago  |  Ends: 14d, 10h  |   5 Proposals
Develop a hardware/software car battery system with the following two basic functions: 1. Identify when the car battery no longer carries the required charge to start the car. 2. Triggers an auxiliary connection, which is attached to the car battery, to take another binary action (activation of a secondary system). The second system does not need to be developed. It is only necessary for the trigger to activate the second system. Please contact me with your relevant experiences, questions, and if possible a general price range. I will share more information as needed. Thank you, Michael
Category: Mechanical       

m****o55
 [?]
Sign in to view client's details.
| m****o55
|    United States
Fixed Price: $500 - $1,000   |  Posted: 14h, 33m ago  |  Ends: 14d, 9h  |   5 Proposals
  [obscured]   We have this product available from our business. A 3'x4'x5" platform that absorbs impact sound for electric drum sets. Our current problem is that these are too large and too heavy to ship across the country. As demand rises we need to find a solution to make these break down in to lightweight shippable pieces so that they can be shipped. Also we would like to be able to have the specs sent to a manufacturer. Understanding of sound isolating materials may help but not necessary. Also we will consider meeting in Los Angeles an option to show you the prototype that we have.
Category: Product Design       

r****dia
 [?]
Sign in to view client's details.
| r****dia
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: 14h, 39m ago  |  Ends: 14d, 9h  |   9 Proposals
Hello Sam, My name is Rory, I live in Las Vegas, Nevada. I have a specific product that I have been trying to source from China. I was able to find one supplier on Alibaba, I contacted them and they were not willing to sell me the product. I think that perhaps they limit the amount of USA buyers of this product. I think that maybe they would be willing to sell to a Chinese person. If not, I would like you to find another supplier of this product. If thats not possible I would like to find a manufacturer willing to make this product for me. It is a very simple product, not expensive at all. Its a specific type of immersion water heater. Are you interested in working with me? Please let me know. I appreciate your time. Regards, Rory   [obscured]  
Category: Mechanical       

r****ay1
 [?]
Sign in to view client's details.
| r****ay1
|    United States
Hourly Rate: $15 - $25 / hr   |  Duration: 1-3 months  |  Posted: 16h, 46m ago  |  Ends: 14d, 7h  |   5 Proposals
Hey Everyone, Our team is developing a new online Geometric Dimension and Tolerancing fundamentals course that we are very exited about. Our goal is to expand GD&T training beyond the classroom into an on-demand video/lecture series that is based on the students needs. We have begun to develop our core curriculum that we want to release for order within the coming months. I am the lead course developer for this project, and while I love making the course, it is becoming overwhelming for me to also drive the business and establish our marketing. I want to get the initial core curriculum out the door quickly to start receiving user feedback. I am looking to hire a GD&T Professional who has worked in engineering and can help with the development of our course. Although I need a GD&T expert, I am looking for someone with a bit of an entrepreneurial spirit who is looking for an exciting opportunity to teach others about engineering topics. The work will be part time, so...
Category: Mechanical       
Preferred Location: United States

g****stc
 [?]
Sign in to view client's details.
| g****stc
|    United States
Fixed Price: Not Sure   |  Posted: 17h, 42m ago  |  Ends: 14d, 6h  |   4 Proposals
Hi, We have a floating wall shelf with a hidden compartment inside to hold a handgun or rifle. Right now we use magnetic keys to lock and open it. As seen here --   [obscured]  /watch?v=Gzo6Ypvh1Hg We REALLY want to upgrade this system to a better mechanical type lock but I'm not sure how that would look and where it would go. Or maybe even a better version of biometric lock? We're looking for input and ideas ... Jeremy
Category: Other - Engineering &...       

J****183
 [?]
Sign in to view client's details.
| J****183
|    United States
Fixed Price: Not Sure   |  Posted: 17h, 47m ago  |  Ends: 14d, 6h  |   14 Proposals
I need a capable poduct designer/engineer for a protection case for street photography cameras like Sony A7 or Leica M. It should be made of aluminium, or steel and poron XRD shock protection foam but beyond that I defer to your judgement on the exact materials. The Goal is to produce it easy and cost efficient. As the first Batches of the product will be small, it should be CNC machined and not injection-molded. The protection unit consits of two separate parts each connected with a Special screw mechanism to the camera. As the later product should protect the camera a FEM Analysis of some Impacts and the absorbtion of the shock would be desirable. For the later manufacturing process I need the CAD drawings converted to step files. Before starting you need to sign the sample elance Non-Disclosure Arrangement. Some drawings upon request.
Category: CAD       
Skills: 3D Modeling, ANSYS, AutoCAD, SolidWorks       

t****rac
 [?]
Sign in to view client's details.
| t****rac
|    Germany
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 18h, 35m ago  |  Ends: 14d, 5h  |   14 Proposals
I am developing a product related to the sport medicine field. It is a hand held device which has cutting components. Starting from scratch. Looking to get help with design and CAD drawings to prepare for prototyping. Must sign NDA. Will give more details later.
Category: Product Design       

M****ift
 [?]
Sign in to view client's details.
| M****ift
Fixed Price: Not Sure   |  Posted: 19h, 43m ago  |  Ends: 14d, 4h  |   1 Proposal
I need people to make a closed checkout point . A closed cashier machine ( you put the money inside the cashier gives you the change back) . A closed coin machine ( you put the coin inside and the coin machine gives you the change back) . A 'dropbox' that you put on the cashier in the closing time and it empties the all the cash from the cashier and then you can put all the money on a safe or a main closed cashier I need everything on the project unless the part of the drawning of the models ( get it already) If you're interested don't hesitate to take contact or ask anything you wonder about this project.
Category: Mechanical       

d****111
 [?]
Sign in to view client's details.
| d****111
|    Norway
Fixed Price: $500 - $1,000   |  Posted: 19h, 49m ago  |  Ends: 14d, 4h  |   2 Proposals
We want to hire a professional writer to write high quality articles with some SEO skills for our website   [obscured]  ,which Our products are centrifugal fans for sale and exportation. A centrifugal fan is a mechanical device for moving air or other gases. Requests as follows. 1.The writer must know our products well. If you have some working experiences as an engineer for centrifugal fans,it should be better. 2.(All about centrifugal fans ,we give keyword, You do research and write, or sometime we write the first draft, you proofread) We will not set any topics for you. You can write anything concerning our centrifugal fans products with some SEO skills to improve the organic flow of our website. 3. Writing 2 articles per week. 4. The article is 300~500letters. We will pay USD5 for each article. 5.The article doesn't need to be very technical. should be easy to understand like articles in here.   [obscured]  /category/beginners-guide/ We sincerely looking for a part...
Category: Article Writing       

n****hen
 [?]
Sign in to view client's details.
| n****hen
|    China
Fixed Price: Not Sure   |  Posted: 19h, 56m ago  |  Ends: 29d, 4h  |   2 Proposals
Have basic design concept for a product that will make animal waste removal more efficient, but need specifics as far as size of components accompanied by images, and possible materials/tooling ideas. Also need to figure out a way of powering the apparatus. Familiarity with the vacuum industry would be useful but not required. Must be willing to sign NDA.
Category: Electrical       

l****mer
 [?]
Sign in to view client's details.
| l****mer
|    United States
Fixed Price: About $100   |  Posted: 20h, 24m ago  |  Ends: 29d, 3h  |   2 Proposals
we are looking for proposal writer on jobs posted in engineering category for Elance website, anybody interested please be in contact for more details. pay are good + depend on wining ratio profile is setup since 2 years with 30-40 jobs done successfully.
Category: Mechanical       

z****aps
 [?]
Sign in to view client's details.
| z****aps
|    India
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: 20h, 49m ago  |  Ends: 14d, 3h  |   34 Proposals
Seeking talented mechanical design engineer to make some changes to current design. Must have minimum 3 years of experience in designing sheet metal/metal parts/products. Looking for a quick turn around, if you are overloaded with work, please do not reply to this post.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

j****mov
 [?]
Sign in to view client's details.
| j****mov
|    United States
Fixed Price: Not Sure   |  Posted: 21h, 52m ago  |  Ends: 2h, 7m  |   6 Proposals
I have STEP-Model of a LED housing. I want to place one LED (6Watt) in the middle of this housing. I need to make the heating simulation to see development of heating in this housing. I want be sure that I have enough material for this kind of LEDs. I need tables and pictures of simulation. Graphs and parameter. Feel free to make your price offer
Category: Mechanical       

d****sDE
 [?]
Sign in to view client's details.
| d****sDE
|    Germany
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 27, 2015  |  Ends: 13d, 23h  |   13 Proposals
A simple website of a preschool setup. That should be integrated with a facebook Page as well as a youtube channel. Requirements: Design Requirements: ? Should be designed in a way that should have children's kinder or preschool look. The design should be like a children play and learning design. Means, shouldn't be on serious theme but should be a childcare colorful theme. ? The website should be structured in a way that should be adjustable by the admin. Means, the admin should be able to add or delete/edit categories and sub-categories. ? Should have news feed area/Blog. ? The site should be designed in a way in which the admin should be able to change the flashing activities around the pages. Facebook and twitter Requirements: ? Generally the teachers post children activities on the school's facebook page. I want the software company to integrate the facebook page in a way that before posting, every post should ask the poster to either post it on website/twitter or not to post. In ...
Category: Web Programming       
Skills: MySQL Administration, HTML, PHP       

s****ani
 [?]
Sign in to view client's details.
| s****ani
|    Australia
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: May 27, 2015  |  Ends: 1d, 20h  |   1 Proposal
I require a patent drafter for my project. Background summary, Abstract are mostly done. But i require assistance with the claims, description and illustrations. Though i my self done bit of work in the claims and description. Due to confidentiality i will not be attaching any filing for your reference but the project is related to "Metal-Ceramic Composite Castings" I want to file this patent urgently. So please only suggest you name if you can complete this project with 4 days of submission of this project to you
Category: Patent, Copyright and...       

A****p21
 [?]
Sign in to view client's details.
| A****p21
|    India
Fixed Price: About $150   |  Posted: May 26, 2015  |  Closed  |   6 Proposals
hi please try to do the simulation and then compare the results with the experiment work...................................................................................................................................
Category: Mechanical       

A****ker
 [?]
Sign in to view client's details.
| A****ker
|    Australia
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job