Save this Search
     

All JobsPBX

 (1,940 results)  
Sort by:
  • Posted Date
Fixed Price: Not Sure   |  Posted: Aug 28, 2015  |  Closed  |   4 Proposals
SMS Server We want to setup a SMS Server that uses GSM SIM cards to send out messages to our clients. We want to use a dedicated tollfree number DID for this that we already own right now with our SIP Trunk provider but we can transfer it anywhere if we need. Setup a SMS Server for our e-commerce company for multiple uses: a. Marketing b. Package Shipping Tracking Updates c. Fraud d. Login/Security for Staff Needed functions: -Bi-Directional Texting (SMS) Messages with our tollfree DID number. -Bulk SMS Messages. -SMS to Email. -SMS Templates(Campaigns). -SMS Receipt Verification. You will be expected to: 1. Recommend cheap or Open Source server software to be used/purchased for the above mentioned tasks. (we currently prefer Diafaan.com's offer.) 2. Recommend GSM Hardware to be purchased that is LAN Based and stable, compatible and high quality. Multi-SIM card option is BONUS. (We are looking at ConiuGo 700100950 UMTS GSM QUADBAND LAN HT). 3. Install the operating system and serve...
Category: Mobile Applications       

****
 [?]
Sign in to view client's details.
| Client
|    United States
Fixed Price: Not Sure   |  Posted: Aug 27, 2015  |  Ends: 5d, 7h  |   4 Proposals
============================ PLEASE READ THIS JOB FULLY BEFORE BIDDING. ============================ We are looking for someone with the following skills: -Experience with local, state and federal laws/regulations for sending SMS messaging in Canada and USA. -SMS Gateways (Installation, Configuration, Troubleshooting) -Linux Administration Skills -Active Directory Skills -SMPP -Telecommunications Experience -Must sign non-disclosure agreement. -We want this done as soon as possible. Tell me how fast you can do this. ============================ We want to setup a SMS Server that uses GSM SIM cards to send out messages to our clients and our staff. We want to use a dedicated tollfree number DID for this that we already own right now with our SIP Trunk provider but we can transfer it anywhere if we need. We are located in Canada, but we want to send and receive messages to USA mainly as well as Canada using a tollfree DID number. Setup a SMS Server for our e-commerce company for m...
Category: Other IT & Programming       

l****234
 [?]
Sign in to view client's details.
| l****234
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 24, 2015  |  Ends: 9d, 19h  |   3 Proposals
We would like to automate the visual output of an asterisk (FreePBX) dialplan based on current Configuration files. We are running FreePBX/Asterisks Ver 1.8 and Ver 11 and higher. The output needs to be at minimal an easy to ready excel spreadsheet, but ideally it will be a full blown visio type document. The diagram needs to show IVR option presses, what extensions are in queues and ring groups, and flow through all destinations. Please provide me with a quote for this job.
Category: Other IT & Programming       
Skills: Asterisk, MySQL Administration, PHP       

g****ley
 [?]
Sign in to view client's details.
| g****ley
|    United States
Fixed Price: Not Sure   |  Posted: Aug 20, 2015  |  Ends: 6d, 4h  |   10 Proposals
Our background: We are into recruitment business. On the sales side, we have leads which are companies. We contact decision makers in these companies to and propose our recruitment services to them. We send these leads emails, we call them, we put notes against the leads in vTiger, we schedule meetings with them, we put reminders to call them every 3 months if they are currently not interested. This part is already working fine in our vTiger 6.3 and integrated with PBX for making and receiving calls. On the candidate side, this is what works for our industry:   [obscured]  /index.php?m=login Click on the link called "login to demo account". This is an open source project. We currently dont use it, but the functionality we need within vTiger is similar to what is shown in this project here. Please see this video here for more clarity on this idea:   [obscured]  /mrBPI-Z7SmE All the communication (email with multiple SMTP servers, inbound and outbound...
Category: Other IT & Programming       

r****sar
 [?]
Sign in to view client's details.
| r****sar
|    United States
Fixed Price: Not Sure   |  Posted: Aug 19, 2015  |  Ends: 5d, 4h  |   12 Proposals
Hello, I'm seeking someone to help me with a quick project, we are running Asterisk 1.6 (Using Fonality) and we're seeking a writer to write us an AGI script for a call back queue. When a caller hits the queue for 2 minutes, I want the next step to run a script which will offer the person to press 1 to stay on hold (proceed with the next step in the menu) or press 2 to have the system call the person back when one of the agents in the queue is free to take a call. This is a simple script for someone who understands how Asterisk works, we have a server on-premise as well as a SQL and MySQL server on premise if required; we can provide full SSH access so you can deploy the script so we can test it together. The idea is not to have our callers on hold for a long time, we just want to be able to offer them the option of having the system call back the number if they opt to hang up and not wait anymore. I read this is possible to do with a call back queue, when a user hits '2' the num...
Category: Other IT & Programming       

i****anp
 [?]
Sign in to view client's details.
| i****anp
|    United States
Fixed Price: Less than $500   |  Posted: Aug 18, 2015  |  Ends: 4d, 2h  |   12 Proposals
Troubleshoot all circuits busy message. Problem lies because we are not getting authorized by the a2billing server
Category: System Administration       

r****din
 [?]
Sign in to view client's details.
| r****din
|    United States
Fixed Price: $250 or less   |  Posted: Aug 18, 2015  |  Ends: 3d, 19h  |   3 Proposals
hi ,, We use elastix for our call center. freePBX-2.8.1-16 asterisk-1.8.20.0-0 We also have a sugarcrm 6.5.15 system which we customized quite a bit. We would like to integrate the two in the following way: We have a custom object called hugin_ecr in sugarcrm which has a unique name value in the following format: FX00NNNNNN F and the two 0's are constant, X is a letter in the following range: O,P,R,S,T and N is a digit from 0 to 9. We would like the caller to key in the variable numeric part (6 digits) in step1. Only in case of multiple valid hugin_ecr record matches we would like to present a second prompt and get the user to select such as: Press 1 for FO Press 2 for FP One example requiring the additional selection is having customers with FO00000010 and FP00000010 and caller entering 000010. When the agent picks up the line, her browser should automatically show the selected ECR detail page. If the customer doesnt enter a valid number, the call should still get connect...
Category: Software Application       
Skills: Asterisk, SugarCRM Development, PHP, Elastix       

s****hra
 [?]
Sign in to view client's details.
| s****hra
|    India
Fixed Price: $5,000 - $10,000   |  Posted: Aug 18, 2015  |  Ends: 18d, 14h  |   9 Proposals
Hi there, We currently have inhouse system built on top of FreeSwitch and it does some work(PBX related) including billings etc.. I'm planning to expand this business for SIP trunking use. For SIP trunking, we will provide customers and resellers a interface where they will further sell the trunking business with both models prepaid and post paid billing model. To accommodate high load with large customers base, we will use some standard SIP server (preferably Kamailio) as load balancer to handle load better, use LCR(Least-Cost-Routing) on FreeSwitch side and enhance billing interface and enhance reseller handling capabilities. This new system will handle large scale calls/Dialer call terminations and we may end up having one proxy with multiple media servers ( FreeSwitch boxes). I would like to work with someone who has strong experience in developing Class 4 and class 5 softswitch. Statements for work: - Setup LCR module( or Routing module) on Kamailio to route calls to mul...
Category: Other IT & Programming       

b****ngh
 [?]
Sign in to view client's details.
| b****ngh
|    United States
Fixed Price: Not Sure   |  Posted: Aug 18, 2015  |  Closed  |   4 Proposals
*****This project needs to be finished in maximum 2days after being awarded to the best freelancer.***** =========================================== Please ONLY bid if you can start immediately and work until fully finished non-stop. Do not bid if you have other projects at the same time please. Please tell me how many hours your require for this. Please only bid if you can work nonstop until fully finished. PBX setup + configuration + testing Job Details: -6 SIP Trunks -2 Inbound IVR Call Flows (I will provide 2 diagram with voice recordings) -4 Telephone Numbers total. -1 Dedicated to Fax. (can send fax only from select email addresses. can receive fax in email pdf) -Voice Recordings. -Speech Recognition for pressing buttons or saying options. -agent extensions -Customer Queue Call-Back Instead of Waiting Feature -Estimated hold time Calculation and information given to customer. -FOP2 Install & Configure. -Call Listen. Whisper to agent. Call barge. -User Authentication. -At...
Category: Other IT & Programming       

****
 [?]
Sign in to view client's details.
| Client
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 17, 2015  |  Ends: 3d, 5h  |   4 Proposals
Hosted PBX service provider based in Calgary, Alberta Canada. Requires lead generation and appointment scheduling.. Looking to target small to medium sized business (Ideally in the energy sector) looking to cut operating expenses during hard economic times.
Category: Lead Generation       
Preferred Location: North America

d****251
 [?]
Sign in to view client's details.
| d****251
|    Canada
Fixed Price: $25 - $40   |  Posted: Aug 17, 2015  |  Ends: 2d, 17h  |   11 Proposals
Trunk configuration and service go-autodial configuration trunck on my elastix pbx check codec port forwarding for Go autodial server local host ip-table
Category: Networking & Security       
Skills: Asterisk, Cisco, Network Administration       

d****770
 [?]
Sign in to view client's details.
| d****770
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 16, 2015  |  Ends: 1d, 23h  |   14 Proposals
hi here I have had some programmers configure and install Asterisk, FreePBX and A2billing on my server and everything was fine, untill i clicked inside the admin area of freepbx and clicked install updates.. Now i can even login the admin area of freepbx. I heard its a common issue when it comes to updating freepbx. thanks.
Category: System Administration       

m****ace
 [?]
Sign in to view client's details.
| m****ace
|    Canada
Fixed Price: Less than $500   |  Posted: Aug 16, 2015  |  Ends: 1d, 22h  |   4 Proposals
vTiger CRM installation + integration with Asterisk (FreePBX) on ours servers Russian localisation of vTigerCRM required Knowing Russian language required
Category: Web Programming       
Skills: Asterisk, CRM, HTML, PHP, vtiger Development       

b****off
 [?]
Sign in to view client's details.
| b****off
|    Russia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 13, 2015  |  Closed  |   4 Proposals
I have been handling the admin of our company Elastix telephone system... need someone to help me work through some programming issues. We can talk via skype. Thanks
Category: Other IT & Programming       
Skills: Elastix, FreePBX       

j****edt
 [?]
Sign in to view client's details.
| j****edt
|    United States
Fixed Price: Not Sure   |  Posted: Aug 13, 2015  |  Closed  |   5 Proposals
1. We have vTiger 6.3 and FreePBX. We are able to click to call and dial out. However web.sh crashes almost every 30 minutes. We need you to fix it. 2. We have several DIDs within our FreePBX. As an example, on our PBX, we have user1, user2, user3, and user4. user1 and user2 are part of 1 ring group and this ring group is connected with DID1. So if there is incoming call on DID1, the call is thrown to user1 and user2 simultaneously. If user1 answers the call, user2 stops ringing and vice versa. If no one answers the call, the call is transferred to VoiceMail of DID1 (not voicemail of user1 or user2). Similarly, user3 and user4 are part of 2nd ring group and this ring group is connected with DID2. So if there is incoming call on DID2, the call is thrown to user3 and user4 simultaneously. If user3 answers the call, user4 stops ringing and vice versa. If no one answers the call, the call is transferred to VoiceMail of DID2 (not voicemail of user3 or user4). Now we want to use our ...
Category: Other IT & Programming       
Skills: Asterisk, vtiger Development, FreePBX, VICIDIAL       

r****sar
 [?]
Sign in to view client's details.
| r****sar
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Aug 12, 2015  |  Closed  |   4 Proposals
We are looking for quick help to check and configure gateway to pass calls to MS Lync ( Skype for Business) from Cisco Unified Call manager 8.6.1. Configure gateway so the calls are passed on properly. Currently we have inbound calls passed from BlueFace to Lync 2013 onto Cisco Call Manager PBX and than to each phone. But we seem to have problems the other way also, when call is re-directed or put on hold it dropps. Looks like gateway configuration.
Category: System Administration       

m****kov
 [?]
Sign in to view client's details.
| m****kov
|    Ireland
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Aug 12, 2015  |  Closed  |   4 Proposals
We are looking for quick help to check and configure gateway to pass calls to MS Lync ( Skype for Business) from Cisco Unified Call manager 8.6.1. Configure gateway so the calls are passed on properly. Currently we have inbound calls passed from BlueFace to Lync 2013 onto Cisco Call Manager PBX and than to each phone. But we seem to have problems the other way also, when call is re-directed or put on hold it dropps. Looks like gateway configuration.
Category: System Administration       

m****kov
 [?]
Sign in to view client's details.
| m****kov
|    Ireland
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Aug 12, 2015  |  Closed  |   2 Proposals
We are looking for quick help to check and configure gateway to pass calls to MS Lync ( Skype for Business) from Cisco Unified Call manager 8.6.1. Configure gateway so the calls are passed on properly. Currently we have inbound calls passed from BlueFace to Lync 2013 onto Cisco Call Manager PBX and than to each phone. But we seem to have problems the other way also, when call is re-directed or put on hold it dropps. Looks like gateway configuration.
Category: System Administration       

m****kov
 [?]
Sign in to view client's details.
| m****kov
|    Ireland
Fixed Price: Not Sure   |  Posted: Aug 12, 2015  |  Closed  |   12 Proposals
telecom software development inbound outbound call center existing CRM app & voip integration click to call past customer pop up caller ID, voicemail sip trunking? Auto dialer feature Automated answering -hr, customer service sales, scheduling dispute resolution/warranty issue Efax & reports
Category: Networking & Security       

j****ove
 [?]
Sign in to view client's details.
| j****ove
|    United States
Fixed Price: Not Sure   |  Posted: Aug 12, 2015  |  Closed  |   1 Proposal
We need to have a IP PBX developer of following platform: - Linux - SUSE - Unix Description: We need to develop a interoperability application for various PBX brands to perform the following functions: - Alarm Management - Feature Management - CDR tickets - Network monitoring We need a person/developer who can configure PBX exchanges of major brands and working knowledge of: Avaya AL 4200/4400 OmniPCX Aastra Siemens Cisco Lync Only qualified and hands on experience persons are requested to apply. We will require a real-time demo of expertise for selected candidates. Thanks
Category: Software Application       
Skills: Asterisk, Java, PHP, TAPI       

b****omp
 [?]
Sign in to view client's details.
| b****omp
|    Pakistan
Fixed Price: Less than $500   |  Posted: Aug 11, 2015  |  Closed  |   8 Proposals
Hi I'm looking for a people who can write a software for Arduino system. I would create an analogic system to connect at my pbx analogic out. In Arduino i have to place a sim of phone, so i can call trough IT and send and receive sms. I would that sms are sent from a pc, such as an email, end the incoming sms are forwarded at a specific email. If the sms is a reply of a sms sent the retourn has to be forwarded at the email of sender. If some part arent clear you can contact me. Thanks Marco Pd: i haven't Arduino hardware, so you have to suggest yo me what buy
Category: Other IT & Programming       
Skills: MySQL Administration, HTML, PHP, Arduino       

i****mbi
 [?]
Sign in to view client's details.
| i****mbi
|    Italy
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 09, 2015  |  Closed  |   14 Proposals
Looking for help setting up FreePBX. I have 2 DID's from DIDLogic and FreePBX setup. One of the DID's behaves as expected and routes to IVR properly. The other DID does not seem to work. When calling it from my cell phone I don't even get a ringtone. Probably a quick job for someone with experience.
Category: System Administration       
Skills: Asterisk, VOIP Administration, FreePBX       

****
 [?]
Sign in to view client's details.
| Client
|    Canada
Fixed Price: Less than $500   |  Posted: Aug 06, 2015  |  Closed  |   4 Proposals
Hi there, We are in the process of implementing Freepbx into our POS system. I have one cURL request already set up that sends uniqueid, callerid, and timestamp to the POS server. I need several more of these after certain events. 1. Once an inbound call is answered, a CURL request needs to be made indicating the extension. 2. If an inbound call goes to voicemail, a CURL request needs to be made indicating the 3. When an outbound call is answered, a CURL request needs to be made that sends the uniqueid, number dialed, and timestamp Ideally, this would be setup through Freepbx custom extensions? Lastly, I have call recording setup on all inbound calls. It would be nice if there was an easy way to access these calls from other clients on my network.
Category: Other IT & Programming       
Skills: Asterisk, PHP, CentOS, cURL, FreePBX       

r****nox
 [?]
Sign in to view client's details.
| r****nox
|    United States
Fixed Price: Less than $500   |  Posted: Aug 06, 2015  |  Closed  |   1 Proposal
We use FreePBX 12 and iSymphony v3. We need to customize isymphony's Panel for our agents so that when a call comes in it shows them a unique id for the current calls recording. Currently we have to track down the recording based on call time and the callers phone number (DID). I know all recordings are given a unique ID but it doesn't display it so that they can enter it into our management software for future reference. We will also need a simple web page to enter a call recordings unique ID and it will pull it from the Database and allow them to download it.
Category: Other IT & Programming       

j****nty
 [?]
Sign in to view client's details.
| j****nty
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job