Save this Search
     

All JobsPhysics engines

 (33 results)  
Sort by:
  • Posted Date
Results for 'Physics engines'
Fixed Price: Less than $500   |  Posted: 7h, 26m ago  |  Ends: 14d, 16h  |   7 Proposals
I'm looking for someone to help me develop a visual prototype (and subsequently a physical prototype) for a bicycle security product. This product needs to be light weight, durable, aesthetically pleasing and secure. Once I have selected the most suitable designer I can provide more information about the product, under NDA. The prototype will be used to assess manufacturing costs and product potential.
Category: Product Design       

d****rez
 [?]
Sign in to view client's details.
| d****rez
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 30, 2015  |  Ends: 12d, 2h  |   6 Proposals
I have finished with all the files in order to proceed with the first physical prototype. Itīs a key chain that has many features. Itīs length 3.20 in. width 2.00 in. and height is 0.58 in. If your interesting in taking this job message me and I can spare more details and the actual picture Thank you!
Category: Product Design       
Skills: Manufacturing Design       

a****223
 [?]
Sign in to view client's details.
| a****223
|    United States
Fixed Price: Not Sure   |  Posted: Jul 30, 2015  |  Ends: 11d, 22h  |   22 Proposals
We need you to convert the attached Eagle Files to Altium. The PCB is a simple open source board created by SparkFun. In addition we need you to: 1: Use our own custom silkscreen art and place it into the final file. 2: Add .5" to each end of the board and add four through-holes in these areas, so we can physically mount the board with fasteners. 3: Change the solder mask to black. 4: Radius the corners 1-2mm. 5: Deliver to us a full Altium package, including BOM, 3D renders (top, bottom & perspective views), and output a SW2014 or equivalent CAD file so we can import it into our product's master CAD file. Do not alter the actual electrical engineering in any way. This is a simple file conversion job. REFERENCE VIDEO FOR CONVERTING FROM EAGLE TO ALTIUM:   [obscured]  /watch?v=mKk__RNxuwc MORE INFORMATION ABOUT OPEN SOURCE BOARD:   [obscured]  /products/13019   [obscured]  /tutorials/bc118-ble-mate-2-hookup-guide
Category: Electrical       

h****agi
 [?]
Sign in to view client's details.
| h****agi
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Jul 30, 2015  |  Ends: 11d, 22h  |   15 Proposals
We are hiring phone and email based sales staff because we need good closers to sign new clients for our lead generation and marketing projects. It doesn't matter where you are physically located and you can work part or full time. We will gladly pay anyone $15 per hour or more if they can first show us that they can close new clients. We also pay 10% commission on all new clients that you close for us. We target high value type clients such as plastic surgeons, lawyers, realtors, roofers, etc so our marketing packages range from $1,000 - $5,000 or more per month. That equates to $100 - $500+ commission for any clients you close for us. We specialize in internet/search engine based marketing and lead generation in a variety of industries. This has NOTHING TO DO WITH mlm, spam, general telemarketing, shenanigans, or any other BS. I am personally the owner of this company...we make sure business owners are seen online by their target market via search engine positioning, video marke...
Category: Telemarketing       
Skills: Lead Generation, Sales, Telemarketing, Marketing       

j****ess
 [?]
Sign in to view client's details.
| j****ess
|    United States
Fixed Price: Not Sure   |  Posted: Jul 30, 2015  |  Ends: 11d, 21h  |   15 Proposals
We have a current business in need of a technology update. We currently have the following disparate systems: --Our website,   [obscured]   is unorganized and not search optimized --Quickbooks to manage customer and purchase orders, payroll and tax reporting (desktop version 2015) --Authorize.net to process credit payments from customers - I'd like to discontinue --FedEx Ship Mgr to process shipping --Act to record any customer issues / complaints-I'd like to discontinue & use an integrated solution I'd like to bring the disparate systems together and to sync it with the physical inventory (including purchase and customer orders). The website needs to be updated to match inventory, allow online ordering efficiently and be optimized for the web. I'd like to continue using Quickbooks if possible to account for payroll and tax reporting. Act is not required but I'd like some CRM feature to better track customer communication and needs.
Category: Software Application       

k****n16
 [?]
Sign in to view client's details.
| k****n16
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Jul 30, 2015  |  Ends: 11d, 11h  |   0 Proposals
responsibility 1, according to company development strategy, make the company, long-term research and development in product design and planning; 2, guide and supervise the r&d department to perform research and development of company's development strategy and annual plan, and shall be responsible for the project schedule and expected results. 3, cooperate with the company total quality management, organize to set up r&d department management system; 4, responsible for the research and development department team construction, selection, allocation and training work 5, complete the temporary work assigned by the general manager qualifications 1, applied chemistry, analytical chemistry, biotechnology, biological engineering, immunology and so on related professional bachelor degree or above; 2, in the field of food safety testing industry has 6-8 years experience in ELISA, colloidal gold as immunological jobs such as development and 5 years project management experience, can i...
Category: Chemical Engineering       
Skills: Research, Project Management       

c****bio
 [?]
Sign in to view client's details.
| c****bio
|    China
Hourly Rate: $40 - $50 / hr   |  Duration: 7-9 months  |  Posted: Jul 30, 2015  |  Ends: 11d, 10h  |   0 Proposals
responsibility 1, according to company development strategy, make the company, long-term research and development in product design and planning; 2, guide and supervise the r&d department to perform research and development of company's development strategy and annual plan, and shall be responsible for the project schedule and expected results. 3, cooperate with the company total quality management, organize to set up r&d department management system; 4, responsible for the research and development department team construction, selection, allocation and training work 5, complete the temporary work assigned by the general manager qualifications 1, applied chemistry, analytical chemistry, biotechnology, biological engineering, immunology and so on related professional bachelor degree or above; 2, in the field of food safety testing industry has 6-8 years experience in ELISA, colloidal gold as immunological jobs such as development and 5 years project management experience, can i...
Category: Other - Multimedia...       
Skills: Other Design       

c****bio
 [?]
Sign in to view client's details.
| c****bio *
|    China
Fixed Price: Less than $500   |  Posted: Jul 29, 2015  |  Ends: 11d, 2h  |   4 Proposals
Looking for someone who is good with logic and basic understanding of the game of poker. Poker has 10 levels from High Card to Royal Straight Flush. There is no real basic logical sense from one level to the next. I want to make sense of this game by making a kid version that relates to the gameplay of poker. A possible comparison could be Football (US Soccer) so a child can understand the rules and easily memorize the gameplay.
Category: Other - Engineering &...       

E****020
 [?]
Sign in to view client's details.
| E****020
|    United States
Fixed Price: Not Sure   |  Posted: Jul 29, 2015  |  Ends: 10d, 10h  |   3 Proposals
The Role This opportunity will offer the successful candidates the unique chance for swift progression into a full trading role where you can expect to be completing your own trades on a managed account. To continue the success our team are in search of the best in their class to come on board and as such we offer a trader position for those that hold twelve months experience within the markets, which ensures new employees are up and running as quickly as possible. Candidates can initially expect the role to include: Exposure to trading, strategies, analysis and risk management Creation of reports and trade reconciliation Building business relationships with clients and other firms Working within projects focused on fixed return contracts Key Responsibilities This is an incredibly hands-on and challenging role, the primary focus of which is to help drive the business forward. With strong career progression on offer to the successful candidates we are after individuals with some exper...
Category: Other - Administrative...       
Skills: forex, fx, spot trader, trader       

u****014
 [?]
Sign in to view client's details.
| u****014 *
|    United Kingdom
Hourly Rate: $40 - $50 / hr   |  Duration: 6 hrs  |  Posted: Jul 28, 2015  |  Ends: 9d, 19h  |   0 Proposals
Our business is mostly dealing with test instrumentation for ballistics testing. Although I have a good base knowledge of the physics of the blast caused by open air explosive testing and shock tubes i would like to spend some time with an expert to discuss and ensure that I have things correct in my head. I am looking for: 1) someone in UK as it would have to be face to face i think 2) someone with a good knowledge of how pressure and shock waves are formed during both open air tests and shock tube testing 3) Most importantly, someone who knows this and can explain to me, no phd, have the patience for the questions a non expert will ask 4) I am particular interested in the pressures formed and the interaction of the pressure caused by something similar to a "vortex cannon". what is the max pressure that can be generated, what is the relationship between the pressure, the ignition source, the speed the pressure travels, what are the pressure drops over distance etc. I hope ...
Category: Other - Engineering &...       
Skills: AISC       

B****nts
 [?]
Sign in to view client's details.
| B****nts
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 27, 2015  |  Ends: 8d, 21h  |   11 Proposals
Tegu, a maker of wooden magnetic building block toys (  [obscured]  ), is seeking a prototype engineer to help demonstrate and evaluate RFID technologies for a 'smart-shelf' retail inventory management application. The individual should be experienced and an passionate builder. Tegu would like to explore using PCB modules to construct a RFID reader and data networking capable prototype. Tegu's scope of work includes: - hardware evaluation - physical assembly of hardware - coding and RFID middle-ware solutions - data integration into Tegu's existing enterprise systems - testing and evaluation of the prototype. Applicants with prior experience in rapid prototyping and/or RFID solutions are a major plus. Should the prototype and working relationship be successful, Tegu envisions significant follow-on work possible. Tegu is ready to move to a prototype ASAP! Please enquirer for more details or questions on the project! Thank you
Category: Electrical       
Preferred Location: United States

T****oys
 [?]
Sign in to view client's details.
| T****oys
|    United States
Fixed Price: Not Sure   |  Posted: Jul 27, 2015  |  Ends: 8d, 14h  |   25 Proposals
Hi, we have a prototype UAV that we have built and we would now like to take it further and make it look tidier and nicer. We would like to make the aircraft out of composites, in molds. This requires that we have stl files for those molds. Also we would like to enhance the design, look into details, change things around etc. All this requires as first step that we have a full working computer model of the aircraft. There are a few moving parts (e.g. the tail surfaces, propellers, landing gear retract) but it is not a huge amount of moving things. We have relatively accurate measurements and even a physical 'model' although it is not that nice, at least it can be looked at to get a rough idea. Created files should be viewable and be able to be manipulated in Autodesk inventor, because we have this program and it would be easier if both you and we could fully view the file, turn it around, assemble and disassemble the model, make measurements, etc. We would prefer a fixed pric...
Category: CAD       

S****DDG
 [?]
Sign in to view client's details.
| S****DDG
|    Singapore
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: Jul 26, 2015  |  Ends: 7d, 14h  |   2 Proposals
I have a device that floats on water, intended to generate power from ocean waves, and I want to simulate its behaviour in typical ocean waves. It will rotate and is tethered by a drive shaft to which a resistive load is applied. The objective of the simulation is to get some data of power it can generate (essentially a product of torque and rotational velocity) without stalling, so I intend to run several simulations with different loads applied. I will also want to vary the parameters of the device itself. The reason for not using OpenFOAM or SimFlow is that because of the substantial movement (with multiple degrees of freedom and a dynamic load applied), a mesh-based simulation option is not as suitable as a particle simulation one, according to an expert on both openfoam and simflow. I've been told that particle methods of simulation that Blender uses is less accurate, but what is more important that absolute accuracy is relative performance of different loads and parameters at th...
Category: 3D Modelling       

m****see
 [?]
Sign in to view client's details.
| m****see
|    United Kingdom
Hourly Rate: More than $50 / hr   |  Duration: Not Sure  |  Posted: Jul 24, 2015  |  Ends: 6d, 2h  |   4 Proposals
I have a 12-year-old Java program that I would like updated so that I can run it in an IDE such as NetBeans and make minor modifications. I'm not a Java programmer and don't wish to become one, but am familiar with Visual Basic. The program can be run online with   [obscured]  /~jgeabana/mol_dyn/KinThI.html, if you want to take a look. I have the Java source code but might be amenable to it being recreated in another language, if that would be easier. It's a simple program of about 800 lines.
Category: Other - Engineering &...       
Skills: Manufacturing Design, Java, Electronics, Physics       
Preferred Location: United States

e****iss
 [?]
Sign in to view client's details.
| e****iss
|    United States
Fixed Price: Not Sure   |  Posted: Jul 23, 2015  |  Ends: 5d, 1h  |   18 Proposals
Need a custom 3-D product idea turned into a physical product. I need someone who is very experienced in turning ideas into reality. Description of Job: I currently have an idea for a product I will get a working 3-D design video to show case product, and how it works. Or if you can help make the 3-D design this would be helpful as well, I have posted another job for this to be done. I would like someone that has knowledge of where to begin to turn idea into actual product and has experience in obtaining a patent/ patent law, and get product onto the market. I need someone who can make it work right, look nice, and be able to be manufactured efficiently. I want a feasible, working prototype, drawings, and manufacturing specs. This job needs to be completed quickly Requirements: - An Established COMPANY that can take high quality 3-D graphic designs and make it work right, look nice, and be able to be manufactured efficiently. I want a feasible, working prototype that can be shippe...
Category: Product Design       

b****777
 [?]
Sign in to view client's details.
| b****777
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 4d, 0h  |   6 Proposals
We are developing trick shot racks for billiards and are in need of help to discover the correct alignment for each of the balls and their exact positioning. We need assistance as to how to mathematically determine this using the physics involved in billiards.
Category: 3D Modelling       
Skills: AutoCAD, 3D Printing, Physics       

r****ley
 [?]
Sign in to view client's details.
| r****ley
|    United States
Fixed Price: Not Sure   |  Posted: Jul 22, 2015  |  Ends: 3d, 11h  |   55 Proposals
Seeking experience Unity3D mobile game developer (iOS & Android) to build a paper plane game similar to   [obscured]  /flight-paper-plane-physics-game/ . Job Scope 1. GUI & Scene design is provided in Unity3D 2. Develop game logic and flight physic (open source engine is acceptable) 3. Build web services to store user and game data 4. Game to run on iOS 6+ and Android 4.2+ smartphones. 5. All deliverables copyrights owned by us Bidder to present relevant mobile game dev in Unity3D to be shortlisted to receive full spec.
Category: Mobile Applications       
Skills: Android, iPhone App Development, Unity       

J****ank
 [?]
Sign in to view client's details.
| J****ank
|    Malaysia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 21, 2015  |  Ends: 78d, 7h  |   7 Proposals
I am an entrepreneur looking for a very senior, creative, Massachusetts based, Mechanical Engineering Consultant to develop a mid-price device to help elderly and physically challenged people up / down stairs without falling. Optimally, your experience would include taking a consumer and/or medical device to market. This has the potential to be a once in a lifetime product and experience. If interested please provide your resume, related experience and target hourly rate.
Category: Mechanical       
Preferred Location: United States

j****h77
 [?]
Sign in to view client's details.
| j****h77
|    United States
Hourly Rate: More than $50 / hr   |  Duration: 4-6 months  |  Posted: Jul 21, 2015  |  Ends: 3d, 6h  |   27 Proposals
Looking for experienced product engineering (mechanical) specialist with proven experience in taking an existing working prototype to become production ready. The right candidate would work with an award-winning industrial design individual who has already been selected. Ideally the candidate will be located in Chicago. The prototype is fully functional, being tested by a professional testing company, but now needs the collaboration between engineer and designer to be completed. Compensation will be competitive with attractive bonuses. The successful candidate must be prepared to start immediately (part-time) and full-time within a month. We anticipate the entire project to last four-six months.
Category: Product Design       
Skills: SolidWorks, 3D Printing, Physics       

a****eas
 [?]
Sign in to view client's details.
| a****eas
|    United States
Fixed Price: More than $10,000   |  Posted: Jul 21, 2015  |  Ends: 13d, 9h  |   9 Proposals
Candidate must be proficient with neural networks, digital control systems, System Verilog, and cryptography. Semiconductor fabrication experience a plus. Strong knowledge in Linux kernel design, and Android API frameworks. Angular JS a plus, but not required. Desirable Skills: - Linear algebra - Wave physics - no-one over 200 lbs - 3D rendering algorithms - network game engine synchronization - fluent in Japanese or Russian a plus - Be organized. - Be punctual Job Description: Please help us, we don't know what we're doing.
Category: Electrical       
Skills: Electrical Engineering, Electronics       

m****ent
 [?]
Sign in to view client's details.
| m****ent
|    United States
Fixed Price: Not Sure   |  Posted: Jul 20, 2015  |  Ends: 2d, 5h  |   20 Proposals
Abstract: Did Galileo Make a Titanic Blunder? This work focuses on Galileo's resurrection, from Greek times, of a core math-organized vision of nature. The introduction section sets a historical context for examining Galileo's philosophy, and while focusing on some mind warps and deep digging doubts. All of the foregoing serves as a preparatory basis for a more direct critique, an unveiling of ideological flaws in Galileo's vision. The work then progresses to show "developmental flaws" as well, or how the unfolding over centuries of that vision's guidance is implicated in very serious modern ecological, health, social and spiritual crises. The second half of the work is a blueprint for an alternative consciousness-centric vision of nature. This begins with a discussion of sample maps of consciousness and next provides the beginnings of its own. The mapping of consciousness first starts with a different approach to methods of reasoning, past the Renaissance's deductive and i...
Category: Editing & Proofreading       
Skills: Book editing       

b****ion
 [?]
Sign in to view client's details.
| b****ion
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 20, 2015  |  Ends: 2d, 1h  |   20 Proposals
Hello, Looking for an experienced IT professional to perform regular network assessments for small businesses. We are an MSP promoting smart, secure IT solutions. Security is a key selling point so knowledge of infosec is important. This is an hourly position, so please quote your rate and amount of time to perform a single assessment of a network using Kaseya, or related RMM, for 10-20 devices including desktops & servers, physical & virtual environments. Deliverables should include insights on security gaps, network efficiency, bottlenecks, outdated hardware/software, backup process, and any other issues that can help the client improve productivity, reduce downtime, and better secure the network and devices. Findings should be summarized and communicated via a bulleted list of issues and suggested remedies. We hire based on the quality of your work, and not necessarily the cheapest hourly rate. I'm happy to answer any questions you have prior to bidding. Thanks.(ID: 758...
Category: Networking & Security       

g****yan
 [?]
Sign in to view client's details.
| g****yan
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: Jul 20, 2015  |  Ends: 76d, 18h  |   33 Proposals
Job Purpose: Responsible for developing, documenting, and supporting standardized and/or customized reports in a MS SQL environment. Duties and responsibilities: Gather report requirements Troubleshoot existing report performance Analyze tables to establish knowledge of data for accurate retrieval and use in report writing Write queries, views, or stored procedures to extract data Develop complex SQL reports automate report data collection Research workarounds to reporting service limitations and propose appropriate solutions Test and validate reports to insure accuracy and quality Maintain, automate and increase efficiency of existing reports Create scripts for importing, exporting, analyzing, mapping and converting data Develop and maintain a variety of report types, including but not limited to tabular, drill down, matrix, charts Skills and Competencies Knowledge of logical and physical data modeling concepts (relational and dimensional) Strong analytical, quantitative and pr...
Category: Other IT & Programming       
Skills: Report Writing       

f****892
 [?]
Sign in to view client's details.
| f****892
|    United Arab Emirates
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Jul 19, 2015  |  Ends: 1d, 7h  |   11 Proposals
SolidWhite Co. designed a product for everyday transit. We do have 3D models and 3D prototypes. We are looking for a professional who can help us with: ? Production of fully functioning prototype with interchangeable design elements ? Reliable engineering solution for the hook mechanism considering the liability issues ( customers weigh over 200 lb and possible impact from emergency stop) ? Ready-to-go mold for injection molding if you are interested please message / submit your proposals
Category: Product Design       

l****bik
 [?]
Sign in to view client's details.
| l****bik
|    Canada
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job