Save this Search
     
Sort by:
  • Posted Date
Fixed Price: More than $10,000   |  Posted: May 05, 2015  |  Ends: 13d, 6h  |   19 Proposals
Looking for a hardware PCB prototyping professional that can design and create what we are looking for. Attached is a document covering the standard that these engines run on and the OS is CAN. I am limited in technical details and will focus on the project objective. Our goal is to create a mobile app that will show real time diagnostic information from the marine engine. Connection types to the engine:   [obscured]  /connectors.asp Marine engine types targeted: YAMAHA MERCURY EVINRUDE (BRP) CUMMINS SUZUKI VOLVO We need a board that would probably if necessary have interchangeable connectors however the Mercury is our prime objective for the prototype. The board will communicate to the mobile device via bluetooth. We have a software company available to handle the firmware and mobile development. However if you can provide a complete solution we are open to discussing it. Most important: We need this designed and prototyped so that it can be tested in a real wor...
Category: Product Design       
Skills: PCB Design, Bluetooth, Hardware Prototyping       

a****pps
 [?]
Sign in to view client's details.
| a****pps
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 02, 2015  |  Ends: 10d, 21h  |   8 Proposals
I have a client who is developing an aerodynamic trailer to pull behind a VW golf or similar sized vehicle. I would be interested in testing the drag created by the trailer in conjunction with that or other vehicles, as well as trying to determine if adding a teardrop or rounded shape to the rear of the trailer would improve the fuel economy / reduce wind resistance by any significant amount. (Shaped roughly like an airstream but the back is flat for the door). Another question is if the trailer is 4-6 inches taller than the vehicle, versus the same height, is that a significant difference in drag or fuel economy? So my questions are: Do you have the software to model this? Is there any calculations you know of to translate increased drag / wind resistence caused by the trailer and calculate reduction of MPG of the trailer or different drag coefficients? What is the range of how long this would it take? I do have the trailer modeled in a 3D program to start with, and I believe model...
Category: 3D Modelling       
Skills: 3D, aerodynamic measurements       

i****lat
 [?]
Sign in to view client's details.
| i****lat
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Apr 30, 2015  |  Ends: 8d, 19h  |   22 Proposals
I am in the process of designing a testing machine and will need someone to create a set of electrical prints from my hand sketches. I would like proper numbering convention so that when the build starts all labels can match the drawings. Please respond with: -experience -what software you plan to use. I would also expect orginal files of the software you are using and also pdf format out.
Category: Electrical       

C****WL0
 [?]
Sign in to view client's details.
| C****WL0
|    Canada
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Apr 30, 2015  |  Ends: 8d, 19h  |   12 Proposals
I am building a test stand for a client. I need a PLC programmer that can program on Koyo Brand PLC's. It will be on the CLICK platform. If you are an experienced programmer, this should be not an issue. Free software can be downloaded at :   [obscured]  /products/clickplcs.html The programming scope is not that complicated. This test will look for a part, sequence a set of valves, monitor an analog pressure for X time. If part passes, unclamp the part, if fails, stay clamped up. Above is the basics. But the catch is that there are two jigs(for 2 parts) and can be swapped in and out. The system will be recognize the jig (simple DIN or might do something with AIN) and load the parameters of the part/jig setup. This will all be connected to a HMI (  [obscured]  /adc/Shopping/Catalog/Operator_Interfaces/C-more_Micro-Graphic_Panels/4_inch_Panels_-a-_Accessories/EA1-T4CL) which I may program myself or have you program it. I expect the prog...
Category: Other - Engineering &...       

C****WL0
 [?]
Sign in to view client's details.
| C****WL0
|    Canada
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: Apr 28, 2015  |  Closed  |   3 Proposals
The job is to create a program in Code composer for concerto DSP family. The code must be tested and fully functional. Software: Code Composer v6 Computing core: Concerto family Test Platform: TMDSCNCD28M36 (F28M36P63C2) Project details: RTOS kernel must be used throughout the project to configure Hwi, Swi, Semaphores and tasks. The intention is to use available TI operating system to its full extent. This will result in saving programming time, reducing the processing time for interrupts, and adding more flexibility to the design. Modbus communication using Ethernet port is required. The module should have a default IP address which can be changed in next power up by updating certain memory registers. Also, the modules should have an option to accept IP address from a DHCP server. A register map must be created to be able to read the current status of the device and also update control parameters. The parameters will affect the operation in both C28X and M3 control cores. Howev...
Category: Electrical       

P****DSP
 [?]
Sign in to view client's details.
| P****DSP
|    Australia
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Apr 28, 2015  |  Ends: 6d, 16h  |   5 Proposals
The positions will be located in East Amarillo TX. 8-12 months The GIS Technician performs edits on gas, electric and land base facility information within Xcel Energy's Enterprise GIS and subsequent software applications; utilizing QA processes to ensure data integrity for advanced downstream applications. Focusing on general data integrity and GIS maintenance work in order to improve data accuracy and reliability. May provide specialized services and mapping products to internal and/or external customers as needed. Minimum Requirements: Completion of degree in GIS or related field; or an equivalent combination of education and work experience. The positions will be located in East Amarillo TX. Supports and assists in the design, development, production, testing, operation and maintenance of components and equipment. Prepares detailed drawings and layouts and conduct materials testing. Performs equipment maintenance, calibration, mechanical and electrical repairs, adjustments ...
Category: Electrical       

j****696
 [?]
Sign in to view client's details.
| j****696
|    United States
Fixed Price: Less than $500   |  Posted: Apr 23, 2015  |  Closed  |   1 Proposal
The OpenFOAMŪ Foundation is a not-for-profit organisation, founded in 2011, that manages the development of OpenFOAM and distribution to the public under the GPL. The Foundation is governed by a Board of Directors including Henry Weller (creator and architect of OpenFOAM) and Chris Greenshields, CFD Direct, and Cristel de Rouvray, ESI Group. The Foundation is based in the UK and has a governance structure that includes the following groups. Financial Membership for organisations that pay a fee to fund the Foundation and participate in the evolution of the software. Contributing Membership for individuals that make a significant personal contribution to OpenFOAM, for the public good. Technical Committees, that participate in software management, such as model implementation, testing and validation.
Category: Other - Engineering &...       
Skills: CFD OPENFOAM       

g****ulN
 [?]
Sign in to view client's details.
| g****ulN
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Apr 23, 2015  |  Closed  |   16 Proposals
We are looking for consultant that can help us do some fairly basic electronic design work. We have budget for this project and are ready to start immediately. Essentially we want to take an existing reference design for WiFi enabled smart plug (   [obscured]  /tool/TIDC-SMARTPLUG-WIFI ) and perform the following modifications: 1) We would like to have two (2) completely independently controlled and monitored egress power ports. Per the documentation, the relay, meterology and microcontroller per egress port is "scalable" so this looks to be a fairly simple task. We would ask for help both with the hardware design as well as the software modifications to be able to control/monitor the second port similar to the primary (note: I am linux software engineer with 20 years of experience, but I have never written hardware drivers). 2) We need to add an electronic or mechanical switch: the board will be housed in a lockable chassis, I just need some notification when the ch...
Category: Electrical       
Preferred Location: North America

k****oso
 [?]
Sign in to view client's details.
| k****oso
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 23, 2015  |  Ends: 1d, 19h  |   7 Proposals
I am working with/for a company whereby we would like to take and provide an external video output to an embedded test instrument we manufacture. Currently, we are using a 5.7" TFT (640x480) in a Portrait mode (writing directly to the display) when landscape is the standard mode of operation. We would like (ideally) to parallel the current display connector via an adaptor board we can have made under advisement, to some sort of translator PGA (or other means) to provide either a DVI or HDMI output to a standard monitor we could rotate portrait. The reason we would like to parallel the connector is the instrument has a waveform display which is overlaid on other graphic elements so, the only place they are together is at the display i/o I know this sounds vague and we can fill in the blanks if this is something which "Sounds" feasible. Supplied is an image of the instrument which currently uses the attached display datasheet. We have a PGA person in house but, display...
Category: Other - Engineering &...       
Skills: Electronics, Computer Graphics, VHDL, TFT Convert       
Preferred Location: North America

g****013
 [?]
Sign in to view client's details.
| g****013
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Apr 20, 2015  |  Closed  |   6 Proposals
I require a bespoke KVM device, with the following features: 1) In-line functionality - The device must sit between a computer and its KVM peripherals, so that a local user can make full use of the system, as well as a remote user. 2) Video support - The device should support D-SUB VGA, DVI-D and HDMI connectors. 3) Keyboard/Mouse support - USB support only required. 4) Storage - The remote user must be able to provide files to the computer. This should be implemented by uploading files to the device, which then presents a USB storage device to the computer. This should include the presentation of an ISO image as a USB CD/DVD drive. 5) Connectivity - The device should have at least an Ethernet connection, but ideally include a 3G/GPRS module for use in the event of wired network outage. The primary non-functional requirement is minimum cost per unit for production. I would need to see at least a high level design of the hardware and software before I could accept a proposal. Su...
Category: Other - Engineering &...       

****
 [?]
Sign in to view client's details.
| Client
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 16, 2015  |  Closed  |   11 Proposals
Update: After a long discussion with my insurance agent, I've removed the design insurance requirement. I am looking for a electronics design partner to create two printed circuit boards for a robotic lawnmower. I am price conscious and interested to learn about any price trade-offs that are available. I believe I want two boards as follows: The base station should contain a PCB that is AC powered using an external transformer. It should have basic location capabilities, an RF transmitter, a modulated infrared light, and provide power to charge the robot unit. The robot should contain a PCB that is battery powered. It should contain a micro-controller, multiple motor drivers, battery management, GPS capabilities, an RF transceiver, and infrared sensors, a small LCD touch screen, sound generation, and several sensors including one or more cameras. These boards should be in compliance with relevant US and EU regulations and standards. You should produce basic software for the sy...
Category: Electrical       

p****cts
 [?]
Sign in to view client's details.
| p****cts
|    United States
Fixed Price: Less than $500   |  Posted: Apr 14, 2015  |  Closed  |   6 Proposals
I need a 2D representation of an electromagnetic device representation known as magnetic flux leakage testing using Ansys Software. Which is fairly simple if you know FEM including few tests which is available in the attached file.Reply me if you are interested and I will send you more details.
Category: Electrical       

m****001
 [?]
Sign in to view client's details.
| m****001
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 11, 2015  |  Closed  |   15 Proposals
I'm running four 'tests' of a PCB design software for marketing purposes (we are producing marketing documents from this). The first part of the 'test' consists of building a part and finding parts in the library. The second part is doing a full schematic and then layout of a board. And the third test is a review/edit of a board (basically looking at the workflow of each type of software). In total, I expect we'll need 4 to 8 hours for each of the types of software. TASK: I need someone who is experienced in each of the four types of software, and I am assuming this is going to be four different people. Though it would be fine to have one person who knows more than one type of software. For this I need someone who is experienced in: 1. KiCAD 2. EAGLE 3. Cadence OrCAD 4. Mentor Graphics Xpedition (DxDesigner) TIMELINE: Ideally we could complete these 'tests' on or around April 16th and 17th. If you can please apply with 1. what type of software you are familiar with 2. how man...
Category: Other - Engineering &...       

l****mer
 [?]
Sign in to view client's details.
| l****mer
|    Canada
Fixed Price: Not Sure   |  Posted: Apr 10, 2015  |  Closed  |   11 Proposals
Design, prototype, and test a 4-channel digital to analog converter system. System should include a 4-channel 24-bit DAC chip, microcontroller, flash memory interface for micro-SD card, and programming interface for software upgrades. Main function of the system is to read 4 channels of data from the flash memory and transmit through the DAC chip at a continuous rate of 2k samples/second or faster. Frequency response for the analog output is DC to nyquist. System should include a switch to start and stop D/A conversion, several LEDs (power, D/A active, etc), and use a DC power supply (Battery and/or wall power brick). Output current is minimal and range should be 5uV to 100 mV or similar. Project includes design stage, customer design approval, then prototype/test and documentation stage. Deliverables: software source code in C-language, prototype board, board design, and short document describing the software and use of the system.
Category: Electrical       

n****ano
 [?]
Sign in to view client's details.
| n****ano
|    United States
Hourly Rate: More than $50 / hr   |  Duration: Not Sure  |  Posted: Apr 09, 2015  |  Ends: 32d, 20h  |   1 Proposal
TabCAT: Tablet-Based Cognitive Assessment Tool We are looking for a software developer to help build a series of tablet-based cognitive and memory tests to support our work in dementia diagnosis and treatment. Our need is immediate, for a programmer to build a set of tests and data collection pages, across a number of different cognitive domains. The project is already up on GitHub:   [obscured]  /UCSFMemoryAndAging/tabcat The framework of TabCAT is pure HTML5, so it can, in theory, run in any modern browser, and writing new tasks requires only basic web programming skills. It uses CouchDB as both its web server and its backend to store transcripts of tasks, which can be retrieved in JSON format. This developer would work under the general guidance of neuropsychologists and neurologists on a team to develop neuropsychological tablet-based tests to be used by examiners with patients in clinic, and by patients at home. The position requires excellent communication skills, and t...
Category: Product Design       
Skills: Javascript, jQuery, HTML5, CoffeeScript       
Preferred Location: United States

m****cat
 [?]
Sign in to view client's details.
| m****cat
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 3-4 weeks  |  Posted: Apr 06, 2015  |  Closed  |   3 Proposals
i want some one to explain to me solid works software and DFA tests , and also run the product in pressure test , i want to optimise my skills at solid works as soon as possible so please help me i am struggling.
Category: 3D Modelling       
Skills: SolidWorks       

r****ldo
 [?]
Sign in to view client's details.
| r****ldo
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Apr 06, 2015  |  Closed  |   7 Proposals
Need a resource that has experience running the US Dept of Energy software and provide reports. We will provide CAD/DWG files of the house and or commercial building. Please provide a pricing list for both RES and COM structures based on sq ft and and and hourly wage. The lowest pricing with most experience will be awarded multiple jobs periodically.
Category: Other - Engineering &...       
Skills: Architecture, AutoCAD, Energy Engineering       

s****ina
 [?]
Sign in to view client's details.
| s****ina
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 02, 2015  |  Closed  |   4 Proposals
We manufacture an MP3 player and we are looking to hire an engineer who can define the QC process, and manage QC at the factory where we have our players produced, incl. document control, software testing, hardware testing, functionality, etc. each time we have a production run. The players are being manufactured in Shenzhen (Pinghu Town)
Category: Other - Engineering &...       
Preferred Location: China

s****pen
 [?]
Sign in to view client's details.
| s****pen
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 26, 2015  |  Closed  |   0 Proposals
MDA Information Systems LLC has an immediate opening for a Mid-level Integration Engineer to join our team. The position provides an opportunity to work on projects that support some of our nation's fundamental defense services. MDA employees work closely with esteemed customers to develop solutions that allow them to carry out high-stakes national security missions. The selected candidate will work with collaborative teams on various technical projects associated with our core mission. The Mid-level Integration Engineer will enhance their skill set by working among a talented and technically accomplished group of colleagues. Engineers enjoy a flexible work environment, where contributions are recognized and rewarded. Position is available in either the Washington DC Metro Area or in Ypsilanti, MI. Michigan-based employees will need to be able to travel between 10-20% of their time. The Company: MDA Information Systems LLC is a major supplier of weather information and geospa...
Category: Other - Engineering &...       
Preferred Location: United States

M****sOC
 [?]
Sign in to view client's details.
| M****sOC *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 26, 2015  |  Closed  |   2 Proposals
MDA Information Systems LLC is looking for a Junior Software Engineer in our Ypsilanti, MI location. This position involves working with a massive C++ codebase, and you will need to be willing to dive right in. The Company MDA Information Systems LLC is a major supplier of weather information and geospatial intelligence. The firm serves a diverse client base including commercial and governmental organizations in agriculture, energy, defense, and civilian government. MDA Information Systems LLC offers an excellent comprehensive benefits package including medical, dental, life, and short/long-term disability insurance, vacation and sick leave, 401(k) retirement plan, Flexible Spending Account and tuition assistance. MDA Information Systems LLC is an Equal Opportunity Employer. To be qualified you must be a US Citizen and be eligible to receive an active TS/SCI Clearance. Core Responsibilities * This position involves working with a massive C++ codebase, and you need to be will...
Category: Other - Engineering &...       
Preferred Location: United States

M****sOC
 [?]
Sign in to view client's details.
| M****sOC *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 26, 2015  |  Closed  |   0 Proposals
MDA Information Systems LLC is looking for a Senior Eng 1 - Software in our Ypsilanti, MI location. This position has a massive C++ codebase, and the right candidate will need to be willing to dive right in, This is primarily heavy duty image processing code that crunches on big images. The Company: MDA Information Systems LLC is a major supplier of weather information and geospatial intelligence. The firm serves a diverse client base including commercial and governmental organizations in agriculture, energy, defense, and civilian government. MDA is an industry leader in earth observation remote sensing technology and image processing. We build satellite ground systems that enable users to acquire and process imagery form the most sophisticated Earth-observing satellites in the world: much of the satellite imagery that you see on Google Maps was generated by our software! To be qualified you must be a US Citizen and have the ability to obtain a TS/SCI Clearance within 18 Mon...
Category: Other - Engineering &...       
Preferred Location: United States

M****sOC
 [?]
Sign in to view client's details.
| M****sOC *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 24, 2015  |  Closed  |   9 Proposals
Hi, I need a circuit board designed and code written for a device that will transmit a weight over GSM to remote servers. The signal coming in will be that of a load cell. I would like the inputs from the load cells to be intrinsically isolated if possible as well. Once the signal is received by the Micro controller, it needs to be sent by GSM. That signal will be sent to a remote server and a web application will use the data to provide customer specific information. The unit will be able to take from 1-10 inputs from the load cells for now, depending on the application. Some Digital outputs from the controller will also be transmitted for alarms. The unit will need to be battery powered, with battery level indication also transmitted. I was thinking that readings from the load cell could be stored up and every couple of minutes sent to server to save on battery life. The project is in South Africa. So, I will need controller, modem etc. to be freely available here. I would prefer...
Category: Electrical       

k****ter
 [?]
Sign in to view client's details.
| k****ter
|    South Africa
Hourly Rate: $40 - $50 / hr   |  Duration: 4-6 months  |  Posted: Mar 18, 2015  |  Closed  |   1 Proposal
Hello, I am a recruiter with Columbus Technologies and Services Inc., and we are recruiting for SpaceX in Hawthorne, CA. They are currently looking for a Jira Adminstrator for a 6 month contract position with potential to be extended. The job description is listed below. Please take a minute to review the opening and if you are interested please respond with a copy of your updated resume and your salary history for the last two years. Once we receive your resume we will contact you and submit your resume to the hiring manager for review. For more information regarding Columbus Technologies please visit our website at   [obscured]   If you are not interested but know someone that may be a good fit, feel free to pass my contact information along. Thanks. Responsibilities Drive New Product Introduction in a high paced Aerospace Avionics manufacturing environment. - Perform a hands-on engineering and liaison role between the hardware desi...
Category: Other - Engineering &...       
Skills: Atlassian JIRA       
Preferred Location: United States

c****usa
 [?]
Sign in to view client's details.
| c****usa
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job