Save this Search
     
Sort by:
  • Posted Date
Hiring Open
Fixed Price: Not Sure   |  Posted: 3h, 5m ago  |  Ends: 14d, 20h  |   0 Proposals
Requirements Design and deliver Design Package which includes the following features: Three Capacitive Sense button configurations suitable for interfacing to an Atmel D2x controller 3 Buttons - 1 x 3 6 Buttons - 2 x 3 1 Button -1 x 1 An ambient light sensor with an I2C interface RGB uniform backlight with separate CMOS level control for each button Minimal number for orderable part numbers Input Deliverables from GOT Interface 6-Button 2D Drawing ( GOT Interface 6 Button.pdf) 3- Button 2D Drawing ( GOT Interface 3 Button.pdf) Image of all three Button Configurations (Custom Cap Touch 2.jpg) RGB LED Specification sheets (XZMDKDGCBD56W.pdf) Ambient Light Sensor Specification sheet (TSL45315) Output Deliverables to GOT Interface Design Package CapSense Circuit Schematics, Gerber files, Fabrication Drawing and Assembly Drawing. LED Circuit Schematics, Gerber files, Fabrication Drawing and Assembly Drawing. Light Guide Film 2D Drawings and 3D Drawings Zemax of other r...
Category: Product Design       

d****iba
 [?]
Sign in to view client's details.
| d****iba
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 3h, 26m ago  |  Ends: 14d, 20h  |   10 Proposals
HI all, I need 3 drawings completed for 3 electrical cabinets we are having built. Done in cad or illustrator or whatever. Just need to clearly communicate to overseas manufacturer. Attached is something similar used previously for another company. Attached also are photos. First cabinet: battery cabinet 1200 high x 600w x 350 d with 3 internal shelves to support max 75kg per shelf (total 4 batteries stored inside) (for indoor and outdoor installation) (2 x 32mm hole punched in each end of shelves) Air vents covered with vermin mesh (front bottom & back wall high) on skids for indoor and outdoor installation (silver colour paint finish) Second cabinet: battery cabinet 900 high x 1200 wide x 600 deep with 3 internal shelves to support max 400kg per shelf 2 x 32mm hole punched in each end of shelves (total 4 levels of batteries inside) (is it possible for all shelves to be removable?) (on skids for indoor and outdoor installation) Air vents covered with vermin mesh ...
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

h****ory
 [?]
Sign in to view client's details.
| h****ory
|    Australia
Fixed Price: Less than $500   |  Posted: 7h, 6m ago  |  Ends: 14d, 16h  |   11 Proposals
I need a case designed that can be 3d printed. The case is to hold a solar powered optical sensor. The case needs to protect from rain and snow, yet allow airflow through to keep the battery cool. The device needs to hold a solar panel (4.9 X 2.5 X 0.11 inches) and it needs a small window that will hold a small 1" square piece of glass. The case needs to sit on a slanted roof. The bottom of the case needs to sit at an angle of 18.43 degrees with a shavable line to allow for 26.57 degrees (or vice versa). The small window for the optical sensor needs to be parallel with the angled mount. The interior needs to hold a circuit board about the size of a credit card. And the entire space should be minimized as much as possible.
Category: 3D Modelling       

M****isT
 [?]
Sign in to view client's details.
| M****isT
|    Canada
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: 11h, 16m ago  |  Ends: 14d, 12h  |   41 Proposals
I need this attached file converted to a dwg,,,2 more to follow, how much will you charge and how long will it take thank you
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

e****nic
 [?]
Sign in to view client's details.
| e****nic *
|    United States
Fixed Price: $500 - $1,000   |  Posted: 13h, 30m ago  |  Ends: 14d, 10h  |   10 Proposals
I'm wanting to design a desk that has an articulating arm for a specific use. I'm looking for the design to be done and payment to be paid in % of the company. I have pitched this product to Walmart and Staples. Both are receptive. I need this design to complete my patent application.
Category: Mechanical       

s****r96
 [?]
Sign in to view client's details.
| s****r96
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: 14h, 22m ago  |  Ends: 14d, 9h  |   5 Proposals
We are working on a house plan, I need to adjust the floor plan as needed to accommodate HVAC supply and return lines and chases. I would like all ducting to be inside the insulated envelope. I would like the following: 1. Analyze the floor plan 2. Draw the supply and return lines 3. Suggest chase placement. The floor plan could be provided in DWG format, Chieft architect is preferred. International applicants must have experience with US HVAC standards. Please do not apply if you don't meet this requirement.
Category: Mechanical       
Skills: AutoCAD, SolidWorks, Mechanical Engineering       
Preferred Location: United States

f****r25
 [?]
Sign in to view client's details.
| f****r25
|    United States
Fixed Price: Less than $500   |  Posted: 19h, 32m ago  |  Ends: 2d, 4h  |   33 Proposals
Hi there, we need an awesome AutoCAD geek for designing a little piece of hardware with a PCB inside. The model will then be used for molding (Polycarbonate) We believe this job won't take longer than a day. We know, we know, it's just a small job, but hopefully there's gonna be more for the future. Details on request.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

S****men
 [?]
Sign in to view client's details.
| S****men
|    Germany
Fixed Price: Not Sure   |  Posted: Jun 28, 2015  |  Ends: 13d, 15h  |   7 Proposals
GOT Interface ? Request For Quotation Design Proposal GOT-20150626-010 Solidworks Modeling and Altium FPC Layout Phase I Design Objective ? ? Create 3D Solidworks parts (surface models) of seven (7) Flexible Circuits GOT-01400467-18 Rev C 6-25-15 Model.dwg for 2D dimensional data ? Incorporate these seven (7) FC into an existing 3D Solidworks assembly ? Using the FC connectors as reference points, create a Solidworks part (surface model) for a Main Interconnect Flexible Circuit, see GOT-01400467-18 Rev C 6-25-15 Model.dwg for reference. ? Complete a tolerance stack analysis of these two parts in the assembly and correct any issues in the Main Interconnect Flexible Circuit. This tolerance stack up will need to take into account the placement variability of the seven (7) Flexible Circuits in the front cover. ? Create 2D dimensioned pdf and a .dxf FPC Layout control drawing for the Main Interconnect Flexible Circuit. Input Deliverables ? ? Enclosure Solidworks Assembly model ? Flexibl...
Category: Product Design       

d****iba
 [?]
Sign in to view client's details.
| d****iba
|    United States
Fixed Price: Not Sure   |  Posted: Jun 28, 2015  |  Ends: 13d, 12h  |   41 Proposals
I need quick 3d assembly model of sheet metal parts in solid works. I will provide you all the sheet metal parts you need to assemble it as per assembly drawing. I will provide you assembly drawing in dwg format and I need the assembly model in igs format. I am looking for a fixed price and for somebody that can get it done in two - three days.
Category: 3D Modelling       
Skills: 3D, SolidWorks       

A****428
 [?]
Sign in to view client's details.
| A****428
|    India
Fixed Price: $1,000 - $5,000   |  Posted: Jun 27, 2015  |  Ends: 23d, 15h  |   9 Proposals
New, small and sleekly designed the DEVICE is a multifunctional clip-like device that is the best -- - Aid ever invented. Simply affix this little super-hero to the - - - or case and your abilities and advantages with your - - - turn ON ! DEVICE brings 8 great advantages that you've always needed to the palm of your hand. All your activities with your - - - improve - comfort, convenience, safety and health. Stop dropping your expensive - - -. Instantly get more than twice the - - -erity, - - - tographic and Attachment abilities. Improve your - - - performance while freeing-up one or both hands. Prop and attach a - - - to an amazing number of things. A DEVICE even holds your cards and money like a skinny wallet. DEVICE tricks are Fun. Some are outstanding. Each of them are truly needed and well designed. Its's universally simple for anyone to use so everyone can find at least two that appeal instantly. The others you'll come to love. Get attached. Get On with DEVICE. Any - - - or Cas...
Category: Animation       
Preferred Location: Canada

T****ect
 [?]
Sign in to view client's details.
| T****ect
|    Canada
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Jun 26, 2015  |  Ends: 11d, 15h  |   81 Proposals
I have planty of 2d drawings what need to be converted,everything will be as we desicussed on skype/ Payment will be on hourly bassis.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

c****a94
 [?]
Sign in to view client's details.
| c****a94
|    Serbia
Hourly Rate: $10 - $15 / hr   |  Duration: 3-4 weeks  |  Posted: Jun 26, 2015  |  Ends: 26d, 14h  |   25 Proposals
I need someone who is good with 3D STUDIO MAX and Solidworks to be able to draw the designs i already have in 3ds max into solidworks
Category: 3D Modelling       

G****YST
 [?]
Sign in to view client's details.
| G****YST
|    United States
Fixed Price: Not Sure   |  Posted: Jun 26, 2015  |  Ends: 11d, 8h  |   55 Proposals
We are looking to have a CAD drawing made for 3D printing. The image with be a cobra head streetlight similar to the attached drawing. The exact dimensions needed will be given upon selection of candidate.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks, 3D Printing       

i****rid
 [?]
Sign in to view client's details.
| i****rid
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jun 26, 2015  |  Ends: 11d, 3h  |   8 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Réalisation pour un client de plans de structures en aluminium. A rendre le 30/06/15.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Fixed Price: $500 - $1,000   |  Posted: Jun 26, 2015  |  Ends: 11d, 3h  |   4 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Cherchons un dessinateur pour la réalisation de plans techniques. A rendre le 30/06/15.
Category: CAD       
Skills: AutoCAD, OrCAD, SolidWorks, 3D Design       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Fixed Price: $500 - $1,000   |  Posted: Jun 26, 2015  |  Ends: 11d, 3h  |   13 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Nous recherchons un dessinateur 3D Solidworks pour une mission courte. Mission à rendre le 30/06/15.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 26, 2015  |  Ends: 11d, 0h  |   12 Proposals
New business venture looking for an skilled individual in sunglasses design. Open to a variety of different experience levels, but would prefer someone with at least 3-5 years of design experience. Pay and weekly time commitment is negotiable. Looking to get several designs for multiple sunglasses lines (men's/women's) over to manufacturer as soon as possible.
Category: Product Design       
Preferred Location: North America

r****n72
 [?]
Sign in to view client's details.
| r****n72
|    United States
Fixed Price: Less than $500   |  Posted: Jun 25, 2015  |  Ends: 2d, 21h  |   9 Proposals
We are looking for a Solidworks script that does the following: 1. Read from a text file a list of node locations (cartesian x,y,z). 2. Import these nodes into a 3D space in Solidworks. 3. Create a 3D part from the nodes (i.e. a combination of pipes, bends and tees) 3. Output a 3D rendering of the part (such as 3D-.pdf, or .stl file). This project should also include a 'readme.txt' for how to install and use script, as multiple people will be using this script.
Category: 3D Modelling       
Skills: 3D, SolidWorks       

w****oTI
 [?]
Sign in to view client's details.
| w****oTI
|    Canada
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Jun 25, 2015  |  Ends: 10d, 20h  |   31 Proposals
We require high quality renders of 3D jewellery models made in Solidworks. The images need to product images that make the jewellery look 100% real and professional. One centre front angle and one isometric angle. The files can be provided in .prt or .stl format. Job would not be a one off. We would be able to do one as a test. If it goes well we would have up to 20 to do of the same style.
Category: Other - Design       
Skills: 3D, 3ds Max, 3D Modeling, 3D Rendering       

a****rlo
 [?]
Sign in to view client's details.
| a****rlo
|    New Zealand
Fixed Price: $500 - $1,000   |  Posted: Jun 25, 2015  |  Ends: 25d, 18h  |   21 Proposals
I have a prototype, but need someone that can make a battery to last longer and someone to make its design more clean and smaller. If anyone has experience please get in touch with me as soon as possible.
Category: Electrical       

M****539
 [?]
Sign in to view client's details.
| M****539
|    United States
Fixed Price: Less than $500   |  Posted: Jun 25, 2015  |  Ends: 10d, 9h  |   7 Proposals
Thank you for your interest in this job posting. My company seeks and experienced eyewear designer who was worked on eyewear design projects before and who is knowledgeable of the intricate details it takes for a pair of sunglasses to not only look great, but for it to also fit great. We already have a succinct model that you will be basing your design work around. At this time, the model has been 3d printed and it still doesn't fit perfectly. This is why we need you to have experience in designing and/or manufacturing eyewear so that you can identify and fix whatever the issue is causing it to not fit right. In your proposal please submit some recent work and describe to us how you are qualified for the task, highlighting in particular how you will go about evaluating the dimensions of the current model, what standard you will be comparing it to, and the way in which you will make changes. The timeline of this project can be however long it needs to be to get this right. Once...
Category: Product Design       

d****li6
 [?]
Sign in to view client's details.
| d****li6
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 25, 2015  |  Ends: 9d, 23h  |   46 Proposals
A Solidworks expert is needed to draw up a simple prototype of a blood bag 'holder' for a biology lab, to be 3D printed. More than one iteration will likely be required before the final product is achieved.
Category: 3D Modelling       
Skills: 3D, AutoCAD, SolidWorks       

b****lab
 [?]
Sign in to view client's details.
| b****lab
|    Canada
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job