Save this Search
     
Sort by:
  • Posted Date
Engineering & Manufacturing
Fixed Price: Less than $500   |  Posted: 7h, 5m ago  |  Ends: 2d, 16h  |   2 Proposals
We need a structural report and design of a structure (roof + facade) The model and design has to be done with SAP2000 and according the latest Eurocodes: We need the sdb-file and the structural report as a pdf-file. The foundation is not part of this Job! Just the skeleton of the glas-roof and glas-facade. We will provide: - 3d-CAD-files - Load assumptions (Dead, Wind, Snow) - Some information about the sections which can be used (only rectangual sections) - Structural system information The Report has to include the design Parameters of the Eurocode. We need an editable Word-file with the entire report and overview drawings of the steel structure for translation: Attached the architectural drawings for a first overview.
Category: Civil & Structural       
Skills: AutoCAD, Structural Analysis, AutoDesk Revit       

W****lci
 [?]
Sign in to view client's details.
| W****lci
|    Germany
Fixed Price: Not Sure   |  Posted: 19h, 30m ago  |  Ends: 14d, 4h  |   2 Proposals
I need advice on a rather awkward loft conversion. It's a 1920 house, On the first floor the walls are lower than the ceiling height and you can see hips of the roof inside bedrooms, the ceiling/floor joists are connect and supported by roof rafters (not sure how exactly to call this construction). I need advice on overall idea if the solution I came up with, and if it is acceptable I would need calculations and drawings (not sure if drawings are needed). Also calculations for a straight forward kitchen extension roof steel. More details, photos and drawings will be provided later. Must comply with UK building regs. See attachments.
Category: Civil & Structural       

i****ito
 [?]
Sign in to view client's details.
| i****ito
|    United Kingdom
Fixed Price: Less than $500   |  Posted: May 28, 2015  |  Ends: 13d, 23h  |   4 Proposals
Hello and thank you for looking. I have a parcel of land that I want to build on. It's not too big, about 2 acres but most of it is located in the flood zone and the county is asking me to do a hydro analysis to see the drainage and other issues so we can resolve it. Perhaps a civil engineer who also does hydro analysis? It doesn't have to be like a complex report.
Category: Civil & Structural       
Skills: Civil Engineering       

s****nfa
 [?]
Sign in to view client's details.
| s****nfa
|    United States
Fixed Price: Not Sure   |  Posted: May 28, 2015  |  Ends: 13d, 9h  |   8 Proposals
Calculate how many people can be in the building look in detail info Need to do a calculation for occupancy load of the building approximately 6000sq.ft. To determine how many people can be in the facility at the same time. This is for Adult Day Health Center. Located in Los Angeles unincorporated area. Must look rules for Los Angeles unincorporated area. I will provide all floor drawings. This form i have to fill out for calculation is enclosed
Category: Civil & Structural       

m****one
 [?]
Sign in to view client's details.
| m****one
|    United States
Fixed Price: Not Sure   |  Posted: May 27, 2015  |  Ends: 58d, 1h  |   3 Proposals
we seek an engineer or qualified person to be able to take our architectural designs of primarily aluminum architectural canopies that are attached to various building types after we construct and apply the calculation to these simple architectural files to submit to our engineer for PE stamping upon validation,,, if you have your PE stamp and can qualify the calculations so we can proceed with the build all the better,,,please respond asap,,,must be in Texas for stamping authorization and the nearer to Houston the better,,,
Category: Civil & Structural       
Preferred Location: United States

s****nst
 [?]
Sign in to view client's details.
| s****nst
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: May 27, 2015  |  Ends: 12d, 22h  |   5 Proposals
Has a combined structure of concrete and wood and consists of some large openings for infinity wall door systems. The main core of the house being concrete with load bearing eco-brick walls and a large wood deck around the second story. I have the design of the structure and need just to analyze/calc it and verify the loads. Easily done in a day's work for a the right person.
Category: Civil & Structural       

c****sse
 [?]
Sign in to view client's details.
| c****sse
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 3-4 weeks  |  Posted: May 27, 2015  |  Ends: 12d, 19h  |   4 Proposals
This job is for architect or engineer who has done container homes and have a design knowledge of the concept, other than putting two or three containers together. Must be creative, attention to detail. Must be a licensed and able to provide stamped plans.
Category: Civil & Structural       

m****ice
 [?]
Sign in to view client's details.
| m****ice
|    Kuwait
Fixed Price: About $20   |  Posted: May 27, 2015  |  Ends: 4d, 17h  |   4 Proposals
Hi. We would like this project to be completed by June 1st. Please provide a 'take-off' and prepare an excel spreadsheet for the following trades: Steel stud framing, non-structural - Gauge, width, length, and quantity. Drywall - Type of drywall and square feet. Paint - Square feet, doors quantity. Flooring - Type needed and square feet. Please ensure that the commas are replaced with periods in the excel spreadsheet as requested. Please provide any special requirements noted on plans as well. Again, this project is $20 flat fee per job. Thanks. Best, Opi   [obscured]  /s/0yqv3nhbp4pywx3/Walmart%20Plans.zip?dl=0
Category: Civil & Structural       

B****INC
 [?]
Sign in to view client's details.
| B****INC
|    United States
Fixed Price: $20 - $25   |  Posted: May 27, 2015  |  Ends: 12d, 11h  |   21 Proposals
I am looking for structural steel estimator to go through the PDF structural drawings and create a list of all the structural members with ruler. Because of the estimation method (ruler) the length can be +-10% For example : 10 lengths 8.7 meters 200UB29 8 lengths 12.6 metres SHS 100X100X5 2 lengths 4.3 metres EA90X90X6 I have around 150 projects for estimation and approximately 1-2 projects coming up every day. A medium size estimation is about 2-3 hours of work. No timewasters. Only experienced estimators I am looking for length and number of each member . Not plates, cleats etc.I can go up to 10-20 dollars per project (depends of the size) .
Category: Other - Engineering &...       

e****234
 [?]
Sign in to view client's details.
| e****234
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 26, 2015  |  Ends: 11d, 21h  |   5 Proposals
I need a civil and structural consult and stamping for a 1920 sq foot home being built in SD. Need CA license, and basically need structural consult, drainage and grading plan, and an easement drawn up for recording. I have an architect doing the drawings and have a google drive to share design.
Category: Civil & Structural       

j****ers
 [?]
Sign in to view client's details.
| j****ers
Hourly Rate: $10 - $25 / hr   |  Duration: Not Sure  |  Posted: May 25, 2015  |  Ends: 11d, 6h  |   12 Proposals
I have a preliminary design of a two story house in autocad file . i would like to fully design the house with REVIT according to the Canadian standard wood houses. please include all of the details of columns, beams, joists, etc.. Kindly, i would like to see the elevations of all sides along with the interior sections. please note that the file must be in revit format.i need it before Sat, May 30,2015. your help is much appreciated!
Category: Civil & Structural       
Skills: AutoCAD, Structural Analysis, AutoDesk Revit       

m****lsh
 [?]
Sign in to view client's details.
| m****lsh
|    Canada
Fixed Price: Less than $500   |  Posted: May 25, 2015  |  Ends: 10d, 20h  |   12 Proposals
Hello, I have a small project to model a relatively simple concept. Knowledge of loudspeaker mechanics is a plus. I need to model: A 3D Atmospheric (fluid) Dynamics Model for based on Intuitive Physics. The concept I have revolves around the design of a new speaker driver. If you're interested, what software might you use? Best, Soudy
Category: 3D Modelling       

s****han
 [?]
Sign in to view client's details.
| s****han
|    United States
Hourly Rate: $40 - $50 / hr   |  Duration: Not Sure  |  Posted: May 23, 2015  |  Ends: 9d, 4h  |   5 Proposals
This job will involve updating a document that tracks changes in the ACI code provisions relating to a particular software package. The document currently tracks changes from ACI 318-02 through ACI 318-11 and needs to be updated for ACI 318-14. This document is in Microsoft Word format and the final deliverable will be this document, updated, still in Word format. Candidate must be a structural engineer (not necessarily licensed) with experience in concrete design. I will supply a pdf document with reports produced by the software. These reports contain equations and other calculations from the ACI code. The reports clearly state which provisions from ACI 318-11 are being used for each calculation, so it should be easy to identify which sections of the code to consider. The job will be to determine which provisions in ACI 318-14 are equivalent to the ACI 318-11 provisions, along with any new provisions in ACI 318-14 which may apply, and update the Word document with these new pr...
Category: Civil & Structural       
Skills: Civil Engineering       

E****Inc
 [?]
Sign in to view client's details.
| E****Inc
|    United States
Fixed Price: Less than $500   |  Posted: May 22, 2015  |  Ends: 7d, 8h  |   11 Proposals
We have a basic plan for adding a second level to an existing ferry boat. We aren't looking for design help. We just need to know what size and type of steel beams we should be using to minimize weight, and maximize space. The footings are not a problem, they are stable. The size of the space is 21 meters long, 7.5 wide on one end, and 6.5 meters wide on the other, with an almost constant taper. The ceiling height is 2.2m. We can place beams at 2m centers, length wise. We would like to place them 2m from the edge of the boat on both sides, so that will leave ~3.5m spacing in the center, width wise. The roof on the second level will be a simple apron with a removable canvas top. We want to use normal commercial standards for load capacity. Floor above will be wood. Below the new deck connects to steel. Again, the basic design is not a problem. Just looking for load calculations so that we can decide what size/shape/type of steel to use for support columns, support beams, spacing, etc. P...
Category: Civil & Structural       

u****ail
 [?]
Sign in to view client's details.
| u****ail
|    Cambodia
Fixed Price: $1,000 - $5,000   |  Posted: May 21, 2015  |  Ends: 7d, 3h  |   2 Proposals
We have a Multi family project in Bakersfield. the building is sinking. We have an experienced contractor with a Pressed pier plan quote need an engineer to get the plans approved by the county building department for construction. I don't require structural analysis. just redo some of the drawing, county may require the plans be stamped.
Category: Civil & Structural       

n****lco
 [?]
Sign in to view client's details.
| n****lco
|    Taiwan
Fixed Price: Less than $500   |  Posted: May 20, 2015  |  Ends: 5d, 22h  |   4 Proposals
Recently i purchase single family in North Hollywood,CA, 91606. We would like to get permit for 1000 addition by owners. I need somebody licence to provide document submittal list. please check attachment.
Category: Civil & Structural       

l****all
 [?]
Sign in to view client's details.
| l****all
|    United States
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: May 19, 2015  |  Ends: 4d, 21h  |   5 Proposals
Purpose: To help collect and filter the chatter of social media Task: Monitor discussions on LinkedIn groups for wastewater and water treatment related discussions. Deliverable: Once per week select & provide 10 best discussion threads for me to comment on. I will select 1 or 2 or 3 per week to write a response. Bonus if you can provide me with YOUR technical research and thoughts and analysis of the topic. Background: There are more than 50 wastewater related LinkedIn groups. Monitoring them all can be time consuming and I need help. I'm interested in providing value to the wastewater community and showcasing my expertise to potential clients for my consultancy services. The initial commitment will be for four (4) weeks and then consider extending.
Category: Civil & Structural       

d****330
 [?]
Sign in to view client's details.
| d****330
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 19, 2015  |  Ends: 4d, 19h  |   5 Proposals
Looking for licensed structural and electrical engineers to help design the PV system in Maryland and Virginia. Open projects, (1) structural analysis of commercial and residential site locations, (2) system design, (3) single line diagram and electrician license sign off. Experience with SolarEdge technologies is preferred.
Category: Electrical       

s****k81
 [?]
Sign in to view client's details.
| s****k81
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 18, 2015  |  Ends: 4d, 4h  |   10 Proposals
I need to set up the sections of a building, according to wind loads and quake loads. I just need help doing this. Although I have the instructions, I need to make sure I do it right. Thank you
Category: Civil & Structural       

j****mon
 [?]
Sign in to view client's details.
| j****mon
|    United States
Fixed Price: Less than $500   |  Posted: May 16, 2015  |  Ends: 2d, 4h  |   1 Proposal
Longhorn SW3P as text with longhorn head (long, horizontal horns) as the logo. Black and gray or lime green and bright orange. Brooks & Dunn skull logo is one I like. This is a Texas company that designs and installs erosion control systems for large commercial projects (office buildings, hospitals, parking garages) and public highway projects and other public improvements (schools, parks, convention centers, and redevelopment projects). Customers are civil engineers and large general contractors.
Category: Civil & Structural       

b****nes
 [?]
Sign in to view client's details.
| b****nes
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 15, 2015  |  Ends: 1d, 6h  |   6 Proposals
A scale drawing is to be provided of the external side profile of a hybrid hoop/gothic arch framed greenhouse design. The anticipated tube/pipe construction will be detailed (weight, length, diameter, metal type, etc. as provided by the manufacturer. Project deliverables expected include: 1) Identification of structural stress points 2) Recommended design configuration of internal reinforcements (will require a simple sketch) to address the stress points identified in 1) above. Reinforcements may be either a specified pipe/tubing (size, length, gauge, etc.) or, when feasible, tension wire (preferred due to cost weight savings). 3) Estimation of the approximate vertical load bearing weight with the reinforcements recommended in 2) above. Factors not to be considered in this project include wind or other horizontal forces. The goal is a rough understanding of the technical feasibility of the proposed design to serve as a starting point for further consideration. Edited: Scale Dra...
Category: Civil & Structural       

O****4me
 [?]
Sign in to view client's details.
| O****4me
|    United States
Fixed Price: Less than $500   |  Posted: May 14, 2015  |  Ends: 5h, 59m  |   11 Proposals
I'm looking for in mechanical engineer specializing in failure analysis of a gearbox. Engineer has to have experience in conducting several types of failure analysis. Including: - Strength analysis - Fatigue analysis - Vibration analysis - Any other kinds of analysis needed I would like to see some examples of previous work. The Candidate has to be available to speak on skype and be willing to sign a Non-Disclosure Agreement for the work done.
Category: Mechanical       

t****awa
 [?]
Sign in to view client's details.
| t****awa
|    Canada
Hourly Rate: $30 - $40 / hr   |  Duration: Not Sure  |  Posted: May 14, 2015  |  Ends: 74d, 20h  |   10 Proposals
Structural Design Engineer High Rise Buildings, Villas,Schools Code ACI, BS, UBC. Seismic And Wind Analysis
Category: Civil & Structural       

E****leh
 [?]
Sign in to view client's details.
| E****leh
|    United Arab Emirates
Fixed Price: Not Sure   |  Posted: Apr 14, 2015  |  Ends: 44d, 16h  |   17 Proposals
Civil engineers create, improve and protect the environment in which we live. They plan, design and oversee construction and maintenance of building structures and facilities, such as roads, railways, airports, bridges, harbours, dams, irrigation projects, power plants, water and sewerage systems. They also design and build tall buildings and large structures that they can last for hundreds of years and withstand all weather conditions. Civil engineers can either be consulting engineers who advise on projects and design them, or contracting engineers who turn their plans into reality and maintain the structures once they are built. Typical civil engineering work activities include: ?undertaking technical and feasibility studies including site investigations ?using a range of computer packages for developing detailed designs ?undertaking complex and repetitive calculations ?liaising with clients and a variety of professionals including architects and subcontractors ?compiling job specs...
Category: Civil & Structural       

e****hdy
 [?]
Sign in to view client's details.
| e****hdy
|    Saudi Arabia
Fixed Price: $1,000 - $5,000   |  Posted: Apr 07, 2015  |  Ends: 37d, 14h  |   6 Proposals
Summary For our R&D department in Damen Shipyards Singapore, we are searching for a junior Structural (FEM) Engineer. Tasks and responsibilities ? Perform Structural analysis via Finite Element Method (FEM) of Ship structures in Siemens NX10 (NX Nastran 10); ? Technical advising and later supervising in the area of Structural analysis. ? Analysis reports. Profile ? Bachelor degree or Diploma in Engineering, preferably Marine or Mechanical Engineering ? Good level in spoken and written English ? CAD skills (able to read technical digital drawings) ? CAD Accuracy & fluency is a must or strongly willing to learn. ? Able to work long time with digital modelling. ? Analytical, goal oriented and flexible to work in team or individually. ? Singaporean or Singaporean Permanent Resident Department Information The Damen R&D department provides specific technical support for the Damen Product Groups (project proposal and project management departments), Engineering Services a...
Category: CAD       
Skills: 3D Modeling, AutoCAD       
Preferred Location: Singapore

j****ffa
 [?]
Sign in to view client's details.
| j****ffa *
|    Singapore
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job