Save this Search
     
Sort by:
  • Posted Date
Fixed Price: Less than $500   |  Posted: 21h, 31m ago  |  Ends: 14d, 2h  |   8 Proposals
We have a basic plan for adding a second level to an existing ferry boat. We aren't looking for design help. We just need to know what size and type of steel beams we should be using to minimize weight, and maximize space. The footings are not a problem, they are stable. The size of the space is 21 meters long, 7.5 wide on one end, and 6.5 meters wide on the other, with an almost constant taper. The ceiling height is 2.2m. We can place beams at 2m centers, length wise. We would like to place them 2m from the edge of the boat on both sides, so that will leave ~3.5m spacing in the center, width wise. The roof on the second level will be a simple apron with a removable canvas top. We want to use normal commercial standards for load capacity. Floor above will be wood. Below the new deck connects to steel. Again, the basic design is not a problem. Just looking for load calculations so that we can decide what size/shape/type of steel to use for support columns, support beams, spacing, etc. P...
Category: Civil & Structural       

u****ail
 [?]
Sign in to view client's details.
| u****ail
|    Cambodia
Fixed Price: $1,000 - $5,000   |  Posted: May 21, 2015  |  Ends: 13d, 21h  |   0 Proposals
We have a Multi family project in Bakersfield. the building is sinking. We have an experienced contractor with a Pressed pier plan quote need an engineer to get the plans approved by the county building department for construction. I don't require structural analysis. just redo some of the drawing, county may require the plans be stamped.
Category: Civil & Structural       

n****lco
 [?]
Sign in to view client's details.
| n****lco
|    Taiwan
Fixed Price: Less than $500   |  Posted: May 20, 2015  |  Ends: 12d, 15h  |   2 Proposals
Recently i purchase single family in North Hollywood,CA, 91606. We would like to get permit for 1000 addition by owners. I need somebody licence to provide document submittal list. please check attachment.
Category: Civil & Structural       

l****all
 [?]
Sign in to view client's details.
| l****all
|    United States
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: May 19, 2015  |  Ends: 11d, 15h  |   5 Proposals
Purpose: To help collect and filter the chatter of social media Task: Monitor discussions on LinkedIn groups for wastewater and water treatment related discussions. Deliverable: Once per week select & provide 10 best discussion threads for me to comment on. I will select 1 or 2 or 3 per week to write a response. Bonus if you can provide me with YOUR technical research and thoughts and analysis of the topic. Background: There are more than 50 wastewater related LinkedIn groups. Monitoring them all can be time consuming and I need help. I'm interested in providing value to the wastewater community and showcasing my expertise to potential clients for my consultancy services. The initial commitment will be for four (4) weeks and then consider extending.
Category: Civil & Structural       

d****330
 [?]
Sign in to view client's details.
| d****330
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 19, 2015  |  Ends: 11d, 13h  |   4 Proposals
Looking for licensed structural and electrical engineers to help design the PV system in Maryland and Virginia. Open projects, (1) structural analysis of commercial and residential site locations, (2) system design, (3) single line diagram and electrician license sign off. Experience with SolarEdge technologies is preferred.
Category: Electrical       

s****k81
 [?]
Sign in to view client's details.
| s****k81
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 18, 2015  |  Ends: 10d, 21h  |   9 Proposals
I need to set up the sections of a building, according to wind loads and quake loads. I just need help doing this. Although I have the instructions, I need to make sure I do it right. Thank you
Category: Civil & Structural       

j****mon
 [?]
Sign in to view client's details.
| j****mon
|    United States
Fixed Price: $50 - $150   |  Posted: May 18, 2015  |  Ends: 2d, 14h  |   14 Proposals
My name is John - working for a Norwegian company delivering steel structures for all kind of buildings. We need continual help with estimates for total weight for steel to some buildings. We only have floorplans and facade drawings of the building, not any details about steel structure. We need you to: - if you miss information; do some assumptions or "reservations" - make a quick sketch for where the steel should be according to floor plans - do a "quick" calculation for the steel. This is in Norway, and might be snow load. - make an estimate for total weight of steel for this building We need good estimates - not detailed engineering I would like to work with people who could do this for less than 150$ Best regards John Steinar
Category: Civil & Structural       
Preferred Location: Western Europe, Eastern Europe

j****sso
 [?]
Sign in to view client's details.
| j****sso
|    Norway
Fixed Price: Less than $500   |  Posted: May 16, 2015  |  Ends: 8d, 21h  |   1 Proposal
Longhorn SW3P as text with longhorn head (long, horizontal horns) as the logo. Black and gray or lime green and bright orange. Brooks & Dunn skull logo is one I like. This is a Texas company that designs and installs erosion control systems for large commercial projects (office buildings, hospitals, parking garages) and public highway projects and other public improvements (schools, parks, convention centers, and redevelopment projects). Customers are civil engineers and large general contractors.
Category: Civil & Structural       

b****nes
 [?]
Sign in to view client's details.
| b****nes
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 15, 2015  |  Ends: 8d, 0h  |   5 Proposals
A scale drawing is to be provided of the external side profile of a hybrid hoop/gothic arch framed greenhouse design. The anticipated tube/pipe construction will be detailed (weight, length, diameter, metal type, etc. as provided by the manufacturer. Project deliverables expected include: 1) Identification of structural stress points 2) Recommended design configuration of internal reinforcements (will require a simple sketch) to address the stress points identified in 1) above. Reinforcements may be either a specified pipe/tubing (size, length, gauge, etc.) or, when feasible, tension wire (preferred due to cost weight savings). 3) Estimation of the approximate vertical load bearing weight with the reinforcements recommended in 2) above. Factors not to be considered in this project include wind or other horizontal forces. The goal is a rough understanding of the technical feasibility of the proposed design to serve as a starting point for further consideration. Edited: Scale Dra...
Category: Civil & Structural       

O****4me
 [?]
Sign in to view client's details.
| O****4me
|    United States
Fixed Price: Not Sure   |  Posted: May 15, 2015  |  Ends: 13h, 14m  |   19 Proposals
We need a structural report and design of a steel structure (single storey). The model and design has to be done with SAP2000 and according the latest Eurocodes: especially EN1993 We need the sdb-file and the structural report as a pdf-file. The foundation is not part of this Job! Also the appartement and office building is not scope of this job. Itīs the same with the arch gate. We will provide: - 3d-CAD-files - Load assumptions - Some information about the sections which can be used - Structural system The Report has to include the design Parameters of the Eurocode. We need an editable Word-file with the entire report and overview drawings of the steel structure for translation: Planview of the roof members Planview of columns All elevation views of the outer and inner walls including bracings Section views Main joint-details Here also the finished files has to be editable (e.g. dwg). The drawing has to be sent as 3D-file and also as revit-structure-file. Attached the archi...
Category: Civil & Structural       
Skills: AutoCAD, Structural Analysis, AutoDesk Revit       

W****lci
 [?]
Sign in to view client's details.
| W****lci
|    Germany
Fixed Price: Less than $500   |  Posted: May 14, 2015  |  Ends: 6d, 23h  |   11 Proposals
I'm looking for in mechanical engineer specializing in failure analysis of a gearbox. Engineer has to have experience in conducting several types of failure analysis. Including: - Strength analysis - Fatigue analysis - Vibration analysis - Any other kinds of analysis needed I would like to see some examples of previous work. The Candidate has to be available to speak on skype and be willing to sign a Non-Disclosure Agreement for the work done.
Category: Mechanical       

t****awa
 [?]
Sign in to view client's details.
| t****awa
|    Canada
Hourly Rate: $30 - $40 / hr   |  Duration: Not Sure  |  Posted: May 14, 2015  |  Ends: 81d, 14h  |   9 Proposals
Structural Design Engineer High Rise Buildings, Villas,Schools Code ACI, BS, UBC. Seismic And Wind Analysis
Category: Civil & Structural       

E****leh
 [?]
Sign in to view client's details.
| E****leh
|    United Arab Emirates
Fixed Price: $50 - $150   |  Posted: May 13, 2015  |  Ends: 5d, 10h  |   14 Proposals
My name is John - working for a Norwegian company delivering steel structures for all kind of buildings. We need continual help with estimates for total weight for steel to some buildings. We only have floorplans and facade drawings of the building, not any details about steel structure. We need you to: - if you miss information; do some assumptions or "reservations" - make a quick sketch for where the steel should be according to floor plans - do a "quick" calculation for the steel. This is in Norway, and might be snow load. - make an estimate for total weight of steel for this building We need good estimates - not detailed engineering I would like to work with people who could do this for less than 150$ Best regards John Steinar
Category: Civil & Structural       

j****sso
 [?]
Sign in to view client's details.
| j****sso
|    Norway
Fixed Price: Less than $500   |  Posted: Apr 28, 2015  |  Ends: 6d, 1h  |   19 Proposals
We are seeking an engineer to fill in on this project and future projects, when we are at capacity. We design wood framed custom residential and additions. In order to be considered you will need to have a structural engineering degree and strong wood design experience. Ability to draft structural plans in AutoCAD is a plus.
Category: Civil & Structural       

l****t23
 [?]
Sign in to view client's details.
| l****t23
|    United States
Fixed Price: Not Sure   |  Posted: Apr 14, 2015  |  Ends: 51d, 10h  |   17 Proposals
Civil engineers create, improve and protect the environment in which we live. They plan, design and oversee construction and maintenance of building structures and facilities, such as roads, railways, airports, bridges, harbours, dams, irrigation projects, power plants, water and sewerage systems. They also design and build tall buildings and large structures that they can last for hundreds of years and withstand all weather conditions. Civil engineers can either be consulting engineers who advise on projects and design them, or contracting engineers who turn their plans into reality and maintain the structures once they are built. Typical civil engineering work activities include: ?undertaking technical and feasibility studies including site investigations ?using a range of computer packages for developing detailed designs ?undertaking complex and repetitive calculations ?liaising with clients and a variety of professionals including architects and subcontractors ?compiling job specs...
Category: Civil & Structural       

e****hdy
 [?]
Sign in to view client's details.
| e****hdy
|    Saudi Arabia
Fixed Price: $1,000 - $5,000   |  Posted: Apr 07, 2015  |  Ends: 44d, 7h  |   5 Proposals
Summary For our R&D department in Damen Shipyards Singapore, we are searching for a junior Structural (FEM) Engineer. Tasks and responsibilities ? Perform Structural analysis via Finite Element Method (FEM) of Ship structures in Siemens NX10 (NX Nastran 10); ? Technical advising and later supervising in the area of Structural analysis. ? Analysis reports. Profile ? Bachelor degree or Diploma in Engineering, preferably Marine or Mechanical Engineering ? Good level in spoken and written English ? CAD skills (able to read technical digital drawings) ? CAD Accuracy & fluency is a must or strongly willing to learn. ? Able to work long time with digital modelling. ? Analytical, goal oriented and flexible to work in team or individually. ? Singaporean or Singaporean Permanent Resident Department Information The Damen R&D department provides specific technical support for the Damen Product Groups (project proposal and project management departments), Engineering Services a...
Category: CAD       
Skills: 3D Modeling, AutoCAD       
Preferred Location: Singapore

j****ffa
 [?]
Sign in to view client's details.
| j****ffa *
|    Singapore
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 18, 2015  |  Ends: 24d, 6h  |   14 Proposals
Technical expert in culverts, roadcrossing and structures galvanized corrugated steel multiple plates bolted. Feasibility and preliminary development projects various. Experience and great knowledge standard ASTM A796/A796M
Category: Product Design       

d****ari
 [?]
Sign in to view client's details.
| d****ari
|    Italy
Hourly Rate: Not Sure   |  Duration: 4-6 months  |  Posted: Feb 12, 2015  |  Ends: 8d, 4h  |   12 Proposals
Looking for an expert with working experience in Comsol Multiphysics to do Finite Element Analysis task mainly in the field of FSI (Fluid Structure Interaction) problem. First has to prove expertise by giving a demo model provided by me. Details can be discussed on chat room.
Category: Mechanical       
Skills: COMSOL Multiphysics       

m****d90
 [?]
Sign in to view client's details.
| m****d90
|    Germany
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job