Save this Search
     
Sort by:
  • Posted Date
Fixed Price: $25 - $30   |  Posted: 23h, 28m ago  |  Ends: 14d, 0h  |   15 Proposals
solidworks modeling for simple GPS device i need solidworks format or STEP or IGES format the gps devise should have internal space 45mm length , 18mm width x 13mm thick attached is the concept design for it it should be consits of 3 parts at least top, buttom, and silver middle part my budget is 30$ happy bidding
Category: CAD       

e****yed
 [?]
Sign in to view client's details.
| e****yed
|    Egypt
Fixed Price: Not Sure   |  Posted: 23h, 55m ago  |  Ends: 14d, 0h  |   5 Proposals
The circuit is made on proteus and coding is done on MIKRO C software the microchip used is PIC 18f46k20 now I need to make the hardware and for that we need a PCB layout in Cadsoft Eagle and I want to transferee the code from Mikro c to mplab x and you need to check the schematic and make PCB on Eagle and guide me through the buying of components and hardware testing further details will be discussed with the selected candidate please don't apply if you area an outsourcer it must be you who does the job as a lot of details will be required from you and if I find that you are an outsourcer I will not continuo with you Thank you The time for this job is 2 days max 1day for pcb transfere and 1 day for code transfere
Category: Electrical       

A****999
 [?]
Sign in to view client's details.
| A****999
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Apr 19, 2014  |  Ends: 13d, 11h  |   13 Proposals
I need proposals for a embedded system circuit design, PCB design & layout, and prototype made and tested. I will provide the specifications, PCB dimensions and connector locations. The basic specifications are: ? CPU: Allwinner A31 ARM SOC ? RAM: 1GB on board ram ? FLASH: 4 GB SD micro card ? 2 x Ethernet connectors ? 2 x USB connectors ? I2C Bus with 4 bus connectors ? LCD connector (from A31 LCD interface) ? Power supply: ? 120VAC to system voltage AC-DC converter ? 120 VAC to 24VAC 50W electronic transformer (i.e small high-frequency AC-AC converter)
Category: Electrical       

t****vey
 [?]
Sign in to view client's details.
| t****vey
|    United States
Fixed Price: Less than $500   |  Posted: Apr 18, 2014  |  Ends: 12d, 8h  |   8 Proposals
I am in need of an inexpensive molding and manufacturing run of a simple item. The item measures @ 6.5 inch x 3 inch. I have attached an image that illustrates that the item is NOT solid plastic, but has open areas within these measurements. (The item resembles the letter "T" with a short leg. The leg has to be of a bendable plastic that could bend back to the Top of the "T". The center of the top of the "T" can be a rigid plastic). (2 separate plastic pieces glued together). I have an already existing Solidworks 3D file that will be sent to the winning bid for review and molding. All plastics types can be considered if they pass US import requirements for products. I have already been given initial mold pricing of ($600.00) from another company and am looking to beat that price. Assembled item pricing bid is currently at .15 cents per item. (Quantities are 5K+) If you can beat these prices by at least 20%, then please make a bid and send samples of ...
Category: Other - Engineering &...       

T****ury
 [?]
Sign in to view client's details.
| T****ury
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Apr 16, 2014  |  Ends: 10d, 1h  |   1 Proposal
? Possess Three years of professional experience as Instrument Field Technician in Construction, Pre-Commissioning and Installing of Instruments. ? In-depth knowledge of data sheets, instrument drawings, I/O wiring diagrams, P and IDs, calculation and specifications ? Extensive knowledge of instrument communication systems and approaches of measurement technologies ? Familiar with QA\QC test check record required during Construction and Pre-commissioning stages ? Familiar with Industrial Automation Tools (PLC,DCS) FIELD CONSTRUCTION: ? Knowledge on field work: how to install different instrument parameters which are as follows ? Instrument stand fabrication , Mounting of transmitter on stand as per standard ? Installation of primary sensing element, Installation of hook up/tubing ? Cabling concept secondary conduit designing concept, Primary conduit cable tray mechanism ? Cable dressing, termination and sealant pouring in the Junction Box ? Knowledge of how to present a Master track...
Category: Other - Engineering &...       

m****741
 [?]
Sign in to view client's details.
| m****741
|    United Arab Emirates
Fixed Price: Less than $500   |  Posted: Apr 13, 2014  |  Ends: 7d, 4h  |   43 Proposals
Looking for someone with experience drafting 3d images and schematic drawings through CAD/Solidworks. Product roughly measures 16w" x16h"x1d". Will contain some electricl components, and only need the schematics drawn up. I have access to a local 3d printer, and need an NDA before moving forward. Please have great communication skills. Thanks.
Category: CAD       
Skills: AutoCAD, 3D Design, Product Design       

k****ted
 [?]
Sign in to view client's details.
| k****ted
|    United States
Fixed Price: Less than $500   |  Posted: Apr 10, 2014  |  Ends: 49d, 3h  |   2 Proposals
Need someone who is knowledgeable in electronics and circuitry to design a circuit board. This board will be utilizing up to 200 photoreceptors, and 200 lasers. It will need to indicate which laser is tripped via indicator light. Must know how to program an Arduino unit. Design must include power source. System must also be able to self calibrate upon power-up. Lasers and photoreceptors will be in a 68x68 square (68 lasers pointed at 68 photoreceptors).
Category: Electrical       
Preferred Location: North America, Eastern Asia

w****cat
 [?]
Sign in to view client's details.
| w****cat
|    United States
Fixed Price: Not Sure   |  Posted: Apr 10, 2014  |  Ends: 4d, 3h  |   24 Proposals
I need someone to work on an existing CAD file and make it more 'marketable' I need the the following layers to be added to the plan (I will just hide the previous version of the below layers). *suite #s added to each room *furniture layout *updated electrical layer (for outlets) *updated phone & internet jack plan **also need the plan 'cleaned up' - remove / black out any non essential items with regards to marketing (i.e. mechanical rooms, building hallways, etc) Once accepted, I will upload a PDF of the above floorplan - with handwritten markups of the above. Floorplan has 50 rooms about 10 x 10 each. Any other suggestions to 'spruce up' the floorplan and make more presentable to potential buyers would be appreciated.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       

i****ace
 [?]
Sign in to view client's details.
| i****ace
|    United States
Fixed Price: $500 - $1,000   |  Posted: Apr 10, 2014  |  Ends: 4d, 3h  |   6 Proposals
Looking to have a minimum of 100-200 boxer briefs made for a clothing brand. 4 colors with matching elastic bands. Fabric should be cotton x spandex blend Elastic needs to be embroidered with brand name Brand logo embroidered on leg of boxer brief Pocket sewn on brief as well Would like this order to be completed by May 1, if possible. Product will need to be shipped to Pennsylvania. Contact for more details. Thank you.
Category: Product Design       

S****uie
 [?]
Sign in to view client's details.
| S****uie
|    United States
Fixed Price: $500 - $1,000   |  Posted: Apr 09, 2014  |  Ends: 3d, 4h  |   7 Proposals
You can build a circuit with arduino type. But it must be the smallest possible self after installation and costed the cheapest. I am open to the suggestion of design to make it more simple. the less expensive to manufacture and less weld. It ok for welding Surface mount Total dimension max +/- 3 in by 5 in Reads the voltage of the solar panel and depending on the output voltage it will set a time in minutes. High intensity 100% = 15 min. Intensity 20% min = 60 min and is proportional ratio when the intensity is between the maximum and minimum. Below +/- 20%. a message is displayed = Not efficient for this moment or what ever Push a bottom to activate the countdown and reset timer. On oled Display - time 0-60 min with the countdown. Display setup option Logo display in standby mode RED OR GREEN monochrome Size + / - 2 in x 2 in You can use a circuit board like arduino or micro arduino. Thank you !
Category: Electrical       

c****ain
 [?]
Sign in to view client's details.
| c****ain
|    Canada
Fixed Price: Not Sure   |  Posted: Apr 09, 2014  |  Ends: 48d, 3h  |   1 Proposal
Implement OFDMA femtocell Interference avoidance technique using one of the open source simulators (either Vienna LTE System Level Simulator or LTE simulator from telematics) Note: for more description details go through the attached microsoft word document ---------- 1. Requirement: The techniques that we want to implement is a combined (mix, merge) of two techniques. We will take the first techniques from any of pdf files with names 1-0, 1-1, and 1-2 inside the attached folder named "Techniques to combine". The first above technique already implemented in the LTE- SL Simulator through choose the scenario 3 - 'tri_sector_plus_femtocells'. The description of this techniques can found in the attached word doc and details can found in papers named 1-0.pdf, 1-1, and 1-2 as shown in the attached folder named Techniques to combine". mor That is mean we just only need to implement and modify the code only for the 2nd technique. As explained bellow in the ...
Category: Other - Engineering &...       

M****014
 [?]
Sign in to view client's details.
| M****014
|    Malaysia
Fixed Price: Not Sure   |  Posted: Apr 07, 2014  |  Ends: 15d, 19h  |   8 Proposals
Looking for a talented spa interior designer, highly familiar with the UAE regulations to help us design an alternative medicine & body therapy center. The approximate size is 2,000 sqf We're aiming for a fresh, gender neutral atmosphere, warm and inviting; earthy colour scheme and warm & woody textures. Minimum decorations. The commercial space will be partitioned into 10 treatment rooms (dry), roughly 3 x 3 m each or as many as we can fit in. Should be provisioned with a reception area, lounge room, kitchenette & office space, 1 bathroom and 1 shower room. It is essential for the design to be in compliance with the UAE statutory requirements. Awaiting your quotes for the SOW mentioned above
Category: Interior Design       
Preferred Location: United Arab Emirates

i****oiu
 [?]
Sign in to view client's details.
| i****oiu
|    France
Fixed Price: $500 - $1,000   |  Posted: Mar 24, 2014  |  Ends: 2d, 3h  |   3 Proposals
Development of a miniature (up to 1" x 2"x .5") Acoustic Echo Cancelling system with hearing self. Power Supply: 6 - 14 VDC Input: Electret Microphone Output: 32 ohm - 600 ohm / 0.5 W Additional requirements and specs will be provided upon request.
Category: Electrical       
Preferred Location: North America

F****r0w
 [?]
Sign in to view client's details.
| F****r0w
|    United States
Fixed Price: Not Sure   |  Posted: Mar 24, 2014  |  Ends: 32d, 1h  |   2 Proposals
Implement OFDMA femtocell Interference avoidance technique using one of the open source simulators (either Vienna LTE System Level Simulator or LTE simulator from telematics) Note: for more description details go through the attached microsoft word document ---------- 1. Requirement: The techniques that we want to implement is a combined (mix, merge) of two techniques. We will take the first techniques from any of pdf files with names 1-0, 1-1, and 1-2 inside the attached folder named ?Techniques to combine?. The first above technique already implemented in the LTE- SL Simulator through choose the scenario 3 - 'tri_sector_plus_femtocells'. The description of this techniques can found in the attached word doc and details can found in papers named 1-0.pdf, 1-1, and 1-2 as shown in the attached folder named Techniques to combine?. mor That is mean we just only need to implement and modify the code only for the 2nd technique. As explained bellow in the section titled ...
Category: Other - Engineering &...       

M****014
 [?]
Sign in to view client's details.
| M****014
|    Malaysia
Fixed Price: Not Sure   |  Posted: Mar 24, 2014  |  Ends: 32d, 0h  |   0 Proposals
Dears Elance Freelancers, Anybody familiar working with Vienna LTE Simulators, especially with Vienna LTE System Level Simulator as they have another one called Link level simulator. Vienna LTE System Level Simulator was programmed using Mat Lab code and it contains multiple Possible simulation types or (scenarios) as listed below: 1 - 'tri_sector' 2 - 'tri_sector_tilted', 'tri_sector_tilted_4x2', 'tri_sector_tilted_4x4' 3 - 'tri_sector_plus_femtocells' 4 - 'six_sector_tilted' 5 - 'capesso_pathlossmaps' 6 - 'omnidirectional_eNodeBs' The modification will be made in code scenario No. 3 which supports femtocells. I mean simulation_type = 'tri_sector_plus_femtocells'; Because I'm working with "Interference Management (avoidance or Mitigation) in two-tier OFDMA femtocell-macrocell network in LTE system" I need somebody to modify this code in the scheduling function to reduce (interference) through implementing a hybrid technique for OFDMA femtocell interference Mitiga...
Category: Electrical       
Skills: Telecommunications Engineering       

M****014
 [?]
Sign in to view client's details.
| M****014
|    Malaysia
Fixed Price: Not Sure   |  Posted: Mar 23, 2014  |  Ends: 30d, 21h  |   0 Proposals
LTE-A System Level Simulator (Implement OFDMA femtocell Interference avoidance technique) Dears Elance Freelancers, Anybody familiar working with Vienna LTE Simulators, especially with Vienna LTE System Level Simulator as they have another one called Link level simulator. Vienna LTE System Level Simulator was programmed using Mat Lab code and it contains multiple Possible simulation types or (scenarios) as listed below: 1 - 'tri_sector' 2 - 'tri_sector_tilted', 'tri_sector_tilted_4x2', 'tri_sector_tilted_4x4' 3 - 'tri_sector_plus_femtocells' 4 - 'six_sector_tilted' 5 - 'capesso_pathlossmaps' 6 - 'omnidirectional_eNodeBs' The modification will be made in code scenario No. 3 which supports femtocells. I mean simulation_type = 'tri_sector_plus_femtocells'; Because I'm working with "Interference Management (avoidance or Mitigation) in two-tier OFDMA femtocell-macrocell network in LTE system" I need somebody to modify this code in the scheduling function to reduce (in...
Category: Other - Engineering &...       

m****123
 [?]
Sign in to view client's details.
| m****123
|    Malaysia
Fixed Price: Not Sure   |  Posted: Mar 20, 2014  |  Ends: 27d, 16h  |   0 Proposals
LTE-A System Level Simulator (Implement OFDMA femtocell Interference avoidance technique) Dears Elance Freelancers, Anybody familiar working with Vienna LTE Simulators, especially with Vienna LTE System Level Simulator as they have another one called Link level simulator. Vienna LTE System Level Simulator was programmed using Mat Lab code and it contains multiple Possible simulation types or (scenarios) as listed below: 1 - 'tri_sector' 2 - 'tri_sector_tilted', 'tri_sector_tilted_4x2', 'tri_sector_tilted_4x4' 3 - 'tri_sector_plus_femtocells' 4 - 'six_sector_tilted' 5 - 'capesso_pathlossmaps' 6 - 'omnidirectional_eNodeBs' The modification will be made in code scenario No. 3 which supports femtocells. I mean simulation_type = 'tri_sector_plus_femtocells'; Because I'm working with "Interference Management (avoidance or Mitigation) in two-tier OFDMA femtocell-macrocell network in LTE system" I need somebody to modify this code in the scheduling function to reduce (in...
Category: Other - Engineering &...       

m****123
 [?]
Sign in to view client's details.
| m****123
|    Malaysia
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job