Save this Search
     

All Jobsdrawing

 (489 results)  
Sort by:
  • Posted Date
Results for 'drawing'
Fixed Price: $1,000 - $5,000   |  Posted: 29 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
We have a project for a public entity located in Colorado. It consists of two sculptures. We already know how we are going to fabricate them, and will be putting together our own construction drawings. We will need an engineer to determine if our design meets requirements, make any suggestions needed to fabrication process to meet requirements, and provide Engineering stamp for City Engineer to approve. Stamp must be a Colorado stamp. This needs to be on a contract or not to exceed basis, not an hourly rate. Once we have had a discussion regarding the project, I will provide our drawings to provide an estimate from. Thanks,
Category: Civil & Structural       
Skills: Structural Engineering       
Preferred Location: North America

j****ott
 [?]
Sign in to view client's details.
| j****ott
|    United States
Fixed Price: Less than $500   |  Posted: 47 minutes ago  |  Ends: 6d, 23h  |   2 Proposals
Hello, We receive offers to draw interior layout plans for an Office. We have 3 different places to fit in the Offices. These places are available in DWG and PDF format on request. The places are 3 flat floors, the whole office will be in the same floor. Total area needed is around 1050 m2 (Sq meters). Information about spaces is available on request. Desing is free, up to you. No limits at this stage of the project. We need at this moment floor plans only, with your proposal of interior layout for the 3 different places. 3 proposals needed , one for each place. We await your response. More info. available on request. Thank you.
Category: Architecture       
Skills: Architecture, AutoCAD       

m****ben
 [?]
Sign in to view client's details.
| m****ben
|    Spain
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: 56 minutes ago  |  Ends: 29d, 23h  |   0 Proposals
Looking for Licensed Engineer to draw up plan for single family home which one floor is being renovated & bearing walls are being removed. We need professional advice and drawings how to replace these bearing walls with appropriate beams. We need to submit plan to Building Dept & Contractor. We are limited with funds so please respond how much your fee is per hr or how much per job. Must have New State license and be located in USA
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: United States

m****ing
 [?]
Sign in to view client's details.
| m****ing
|    United States
Hourly Rate: $30 - $40 / hr   |  Duration: Not Sure  |  Posted: 1h, 8m ago  |  Ends: 14d, 22h  |   0 Proposals
I need a designer with software to design cabinet projects. Preferably 20/20 or equal software. Will coordinate with my office to produce shop drawings to put jobs into production. Experience in frame-less boxes required.
Category: Other - Design       
Skills: Graphic Design, Adobe Photoshop, Web Design       

G****off
 [?]
Sign in to view client's details.
| G****off
|    United States
Fixed Price: Less than $500   |  Posted: 1h, 30m ago  |  Ends: 2d, 22h  |   4 Proposals
Hello, I have this provisional patent application to be written. I have the drawings already ready. The vendor I would work with needs to have prior experience in patent writing. Vendor I would start discussions with will need to sign an NDA prior to be given more information
Category: Patent, Copyright and...       
Skills: Intellectual Property Law, Patent Law       

j****lob
 [?]
Sign in to view client's details.
| j****lob
|    United States
Fixed Price: $100 - $180   |  Posted: 2h, 40m ago  |  Ends: 21h, 19m  |   7 Proposals
we have a 3 mins cartoon script animation and need a talented illustrator to create funny and caricatural scenes You must be able to replicate THIS STYLE HERE :   [obscured]  /iG6vXm we are looking for an artist that can work quickly. Budget : 180$
Category: Cartoons & Comics       
Skills: Cartooning, Caricature Drawing       

G****ons
 [?]
Sign in to view client's details.
| G****ons
|    United States
Fixed Price: $20 - $50   |  Posted: 2h, 52m ago  |  Ends: 14d, 21h  |   7 Proposals
We need the attached drawings done in autocad. Please note we have shown which drawings need to be done and crossed out the ones that do not need to be done. We will provide our cad detail standards and border sheet for your use.All cad drawings must be done based on our standards and on our title block. We do not have the attached drawings in cad - You will need to redraw them and then make some minor revisions we will mark up for you. Please note that you must provide a fixed price to be considered. You price must reflect what you are willing to charge to complete the entire scope of work. within the time frame. You must use Autocad. Do not bid if you cant do the work in the time frame you mention. We have worked on elance for many many projects. We are always fair and reasonable and appreciate the many fine people we have worked with over the years. When you are working and send drawings we need pdf and autocad.
Category: Architecture       
Skills: Architecture, AutoCAD       

s****ner
 [?]
Sign in to view client's details.
| s****ner
|    United States
Fixed Price: Less than $500   |  Posted: 2h, 53m ago  |  Ends: 14d, 21h  |   1 Proposal
Hello Freelancers - Ghostwriters I will ghostwrite with one of YOU for 40 Ebooks. I am looking for someone who want to deal in 400 Dollars. I know... Maybe it's not sound a lot of money for 40 Ebooks, but what I give to you make this project a great opportunity for you! ~ Time (3 months) ~ Drawing - outline for 40 Ebooks about the chapters (You will give me your ideas, too, so, we will combine them and this is very helpful - not everyone help in this way) ~ maybe PLR Ebooks just for change these books (!), so it's not necessary in every book to write your content with your ideas. ~ Ebooks will not to be lengthy (just 60 to 90 pages). ~ 5 STARS feedback and a really good comment! ~ Every 2 to 3 months I will work with you, so this is going to be a long term cooperation. If this is something sounds good for YOU or this is your OPPORTUNITY to start a new job and a long-term cooperation with bid for 400 Dollars. I will not accept any bid up to 400 Dollars, do not waste your time and my ti...
Category: E-books and Blogs       
Skills: Article Writing, Content Writing, Blogs       

m****svm
 [?]
Sign in to view client's details.
| m****svm
|    Greece
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 3h, 0m ago  |  Ends: 29d, 20h  |   4 Proposals
I am looking for a consultant to help guide me and check my work to conduct air cooler exchanger mechanical calculations.For example Wall thickness Calculations, Complete Nozzle Calculations, Shell calculations, Seismic code calculations, Bottom and top heads calculations, pressure calculations and any other design calculations. This is an existing piece of equipment and need to conduct calculations based on it's current wall thicknesses and setup Air cooler exchanger drawings and pictures will be provided to the selected candidate. This job is for guidance and checking, work will be by us.
Category: Mechanical       

w****ali
 [?]
Sign in to view client's details.
| w****ali
|    Canada
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: 3h, 18m ago  |  Ends: 14d, 20h  |   10 Proposals
looking for someone who can combine the hand written mark ups on an existing drawing to make a complete drawing. there are four seperate drawings to be done. for more info see the file so you can see the scope of the work
Category: CAD       
Skills: AutoCAD       

t****oen
 [?]
Sign in to view client's details.
| t****oen *
|    Canada
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: 3h, 24m ago  |  Ends: 14d, 20h  |   3 Proposals
I need a schematic of an outdoor recreational space drawing I created...please advise who can help me.....thks
Category: Architecture       

Y****e61
 [?]
Sign in to view client's details.
| Y****e61
|    United States
Fixed Price: Less than $500   |  Posted: 4h, 1m ago  |  Ends: 1d, 19h  |   31 Proposals
I'm looking for a logo design for a laser tag business. I need to see two unique concepts that combine type and a graphical icon. I will provide descriptions and examples for the type of style and illustration I need. Final artwork will need to be provided in black and white as well as full colour, in a layered Photoshop file (CS 5.5 or earlier version). I'll need an initial proof in 3 days, final artwork in 7 days. I'm very responsive with feedback and direction. Logo type: Pictorial or Graphic Type
Category: Logos       

N****ing
 [?]
Sign in to view client's details.
| N****ing
|    Canada
Fixed Price: $20 - $25   |  Posted: 4h, 7m ago  |  Ends: 14d, 19h  |   2 Proposals
I need design for specific dimensions 320mm x 160mm and I need it to be simple. The name of the product is "Present" and I need it slogan for this name. If you have any other idea about the name of the product, or if you think that you can make some better changes in the design, it would be accepted.. I need you to keep the selected shape of the chocolate candy, or if you can find on the internet you can place another candy, but with similar shape. The attachment is made in Corel Draw. You can make it in any program you like
Category: Graphic Design       
Preferred Location: India/Southern Asia

n****sen
 [?]
Sign in to view client's details.
| n****sen
|    Macedonia
Fixed Price: $1,000 - $5,000   |  Posted: 4h, 43m ago  |  Ends: 19h, 16m  |   9 Proposals
Create game icon paintings representing items, actions, and people from song lyrics for mobile music game. Project will start with approximately 20 items to allow us to select best artist who can provide quality needed with quick turn around. Subsequent projects will require several hundred item drawings.
Category: Art       
Skills: Adobe Photoshop       

M****mes
 [?]
Sign in to view client's details.
| M****mes
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: 4h, 44m ago  |  Ends: 14d, 19h  |   1 Proposal
I am looking for a few drawings and text lettering for a website titled Girls Rock Chiropractic. All drawings will have a rock-and-roll theme and I have specific ideas in mind for what it should look like. The drawings should be creative, sketch-type drawings with color and a lot of energy. I have attached ideas that I want to expand upon.
Category: Art       

L****als
 [?]
Sign in to view client's details.
| L****als
|    United States
Fixed Price: $120 - $150   |  Posted: 4h, 46m ago  |  Ends: 14d, 19h  |   2 Proposals
Hello, This is an experimental project, so the budget is quite low. I need 10 videos of someone's hand drawing 10 cartoons, along with a voiceover of the process, similar to this -   [obscured]  /watch?v=xRMbSqsdGHk If you can draw directly on the computer using a digital tablet, then a video capture of the screen along with the voiceover will also be fine. The cartoons would be anything simple to draw like scenery, rose, dragon, face, shark, princess, olaf etc. Thanks, Neole
Category: Art       
Skills: Cartooning, Drawing, Sketching       

N****e80
 [?]
Sign in to view client's details.
| N****e80
|    India
Fixed Price: Not Sure   |  Posted: 5h, 39m ago  |  Ends: 14d, 18h  |   2 Proposals
Hiring Process: Read Guideline, Take the Quiz, Apply Job, Meet Interview, Get Hired, Keep Working :) Hello We are in need of Data Entry Person who has a very good typing speed with 99.99% accuracy. You will process data on a Web Platform. You will be trained and qualified using a custom web data entry platform. You will be responsible for using a web tool to (1) draw simple boxes around items, (2) Select thumbnail representations for each item in question, and (3) complete manual text transcription of text, numbers, and quantities. Details guideline will be provided . you will work on Number 3 for now and will move to process Number 1 & 2 when we think you are set to do those. Payment would made as per task completed basis. You will get paid USD 6.66 / 1000 tag completed. Payment would be made twice on each month. We will share it during interview process. Payment would be send through Only Elance. Your approximate schedule of work would be probably Monday: ...
Category: Data Entry       
Skills: Dedication to work, gmail, team viewer       
Preferred Location: Bangladesh

j****ce_
 [?]
Sign in to view client's details.
| j****ce_
|    Bangladesh
Fixed Price: Not Sure   |  Posted: 6h, 24m ago  |  Ends: 14d, 17h  |   4 Proposals
Draw parts of a watch in 3D in ProE or .stp file for CNC manufacturing Attached is just a example. Actual project will have lesser parts Design and dimensions of the parts will be provided.
Category: Other - Design       
Skills: 3D, 3D Modeling       

S****012
 [?]
Sign in to view client's details.
| S****012
|    Singapore
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 6h, 33m ago  |  Ends: 14d, 17h  |   12 Proposals
I'm looking to redo the cover for my published book, Scepter. If I can find something I like, book two will need a new cover as well. Books 3-5 are in the works, so I'd like this to be more than a one shot deal. The image I keep coming back to for the cover is a small cabin in a clearing in the woods. Emerging from the trees is a collection of mercenaries coming to collect one of my main characters as a slave. His brother has something else in mind, and stands atop the cabin, with mountain lions standing at his side. Bears guard the front door. In the night sky above, I'd like two vague but discernible eyes, an indication of someone watching over the events. I can provide greater detail if needed, or send you the passage so you can read it for yourself and get a picture in your mind. What I'd like to find out is a) how much this might run me, and b) how fast it can be turned around. My drawing is horrible, so I have no idea how long this would take. Thus, the hourly rates don't rea...
Category: Illustration       

s****ins
 [?]
Sign in to view client's details.
| s****ins
|    United States
Fixed Price: Less than $500   |  Posted: 7h, 22m ago  |  Ends: 14d, 16h  |   0 Proposals
I need 40 detailed questions written with detailed solutions for the construction depth portion of the NCEES PE examination. Guidelines for the depth construction portion can be found at NCEES.org website. I have also attached a PDF showing what specification are for the exam (shows breadth and depth. I just need depth). The specification lists modern codes that must be incorporated into the exam as well. My goal is to obtain more questions to study so that I can help others pass the exam and collect excellent study material. I will own all rights to the problems developed so that I can later share them with others as I see fit. Skills for this job include knowing how to use equation writer in word, develop drawings in AutoCAD or another program, excellent verbal skills, and in general, knowing how to solve civil engineering problems found under five disciplines: Water/Environmental, Geotechnical, Transportation, Structural, Construction. I want to know if you are familiar with ...
Category: Civil & Structural       

M****eek
 [?]
Sign in to view client's details.
| M****eek
|    United States
Fixed Price: Not Sure   |  Posted: 7h, 26m ago  |  Ends: 14d, 16h  |   1 Proposal
We have already developed a desktop application which runs on windows/linux and mac. However the current framework has too poor GUI capabilities and therefore we intend to move to Cocos2D-X. In this step we would also like to redesign the whole graphics and sprites. In this first job we would like to complete following tasks: We will be starting with a project which displays an infinite canvas (tiled background) and which shows a panel with a few widgets within it (like an inventory panel in various games). 1. Implement drag and drop of the panel widgets onto the canvas 2. Zoom in/out with the mouse wheel 3. draw connection lines between two distinct objects on the canvas [optional: Create background/widget and the panel graphics (2D images)] We will setup a subversion repository for you to commit changes and to pull the current almost empty project. I am attaching a screenshot of the current application to give an impression of the final work.
Category: Other IT & Programming       
Skills: Game Development, Cocos2d       

o****sDA
 [?]
Sign in to view client's details.
| o****sDA
|    Germany
Hourly Rate: $5 - $20 / hr   |  Duration: Not Sure  |  Posted: 7h, 51m ago  |  Ends: 14d, 16h  |   2 Proposals
Need an illustrator who can draw/design the an image that will be used on the package of a soon to be launched product. The image needs to be of three black woman ( so the skin tone need to be dark) either sitting with legs crossed ( see attachment) or just their legs ( see other attachments) but the focus needs to be on their legs. Lastly I have also attached an image ( from online) that I found that will show you the sort of colour skin they need to have. All three women should have different shades ranging from light brown to very dark. I am open to your suggestion so please do not be constricted by my specifications above, if you think there are other elements that you can add that will make the final product better then please do so and we can amend as we go along.
Category: Illustration       

p****wal
 [?]
Sign in to view client's details.
| p****wal
|    United Kingdom
Fixed Price: Less than $500   |  Posted: 8h, 2m ago  |  Ends: 14d, 15h  |   6 Proposals
Looking for AutoCAD 12 expert to re-draw a screeshot (cad image) with all info necessary need to redo this part as a DXF file (water jet cutter) AutoCAD Release 12 DXF files are widely compatible Newer versions of the AutoCAD DXF file are less likely to be supported. Generally speaking, the newer the format, the less compatible it is. If you have a choice when you save the file, choose the AutoCAD 12 DXF version. Avoid "binary" dxf files Virtually nobody supports binary DXF files Explode or ungroup all entities Before saving as a DXF, "Explode" all entities that define the geometry of the part. Most CAD programs let you group together entities to make it easier to copy and move them. Be sure to explode (or "ungroup" or "convert to curves") before saving the DXF file. Use simple lines and arcs whenever possible The DXF file format doesn't support Bezier curves or other fancy (and convenient) ways of creating complex curves. When you export the...
Category: CAD       
Skills: AutoCAD 2012       

p****lim
 [?]
Sign in to view client's details.
| p****lim
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job