Save this Search
     

All JobsiOSEngineering & Manufacturing

 11 results  
Sort by:
  • Posted Date
Fixed Price: Not Sure   |  Posted: 8h, 39m ago  |  Ends: 14d, 15h  |   8 Proposals
UPDATE: I have redone the sketch of the floor plan and clarified what our current vision is for the new floor plan. The attached sketch of a floor plan is the existing, 1,755 square foot, layout of a 1975 ranch house with a~300 sf basement (which is not yet dimensioned but should be added on 7/10-7/11). We are moving a family of 2 adults and 4 children, 6 and under, into this house. Our plan is to enclose the garage to make it into a master bedroom and bathroom (see the adjoining bathroom to the garage), and expand the kitchen into this area, allowing for a kitchen upgrade. A stair case will be added to access the basement from inside the house. We would like to add a garage or detached garage/carport once the garage is closed in, so that cars can still be parked in a covered area. Requirements: 1 - The existing floor plan shall be transferred to a suitable architectural, digital 3d model style (Chief Architect, ArchiCAD, etc) so we can get a better feel for what the current ho...
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: United States

T****ter
 [?]
Sign in to view client's details.
| T****ter
|    United States
Fixed Price: More than $10,000   |  Posted: Jul 08, 2014  |  Ends: 5d, 5h  |   14 Proposals
For one of our customer we are looking for a circuit board designer with programming skills on Altera MAX 2. High level design : - Nordic nRF51822 BLE with ARM Cortex M0 - 2.4Ghz Antenna on PCB - Altera MAX 2 EPM570 FPGA /CPLD or similar used as IO extender (min 100 digital input) connected to Nordic nRF51822 over SPI or I2C. - 3V rechargeable battery - battery charger logic and interface (magnetic power connector as found on Peeble smartwatch ). - flat flexible cable connector to provide at least 102 connection. - additional resistors and capacitances - programing IO / connector for ARM Cortex M0 (serial interface) and FPGA. - PCB size limited to 40mm x 60mm . PCB height should not exceed 3mm if possible. The board will be connected to a network of 100 capacitor through a flexible cable. Board will have to measure capacity @ 100hz of each capacity in range of 2pF - 10 pF. For that we expect to use the oscillator based measurement method. See chapter 3.1 here :   [obscured]  
Category: Electrical       

s****ure
 [?]
Sign in to view client's details.
| s****ure
|    France
Fixed Price: $300 - $1,200   |  Posted: Jul 05, 2014  |  Ends: 10d, 11h  |   11 Proposals
DESIGN PCB, Spec. Source parts, and Assemble PCB for Toy Motor control; Program Firmware; AND (Option #1) a handheld RF Remote Control (with key pad and 20-digit-LED Displays), OR (Option #2) iOS/Android Remote Control App via Bluetooth. (PREFERRED) GENERAL DESCRIPTION OF PROJECT Using off-the-shelf parts/components as much as possible, create specifications, program firmware, configure and assemble the control/power electronics for a device roughly equivalent to, but somewhat more sophisticated than, a Remote-control wheel-driven Toy. The device will include: - Stepper or geared electric motor - programmable clock/calendar Function for scheduling motor-on-events, - one LED Alpha-numeric 20 digit (on RF Remote) - one LED 3-digit Display (On toy device) - a Count-Down-Timer function, - a sound/tone generator, with user Selectable-assignable tones. - a vibration generator (as found in cell phone) - Firmware settings for defaults and user prefs (e.g., time intervals, event-sou...
Category: Other - Engineering &...       
Skills: Android, Electronics, Bluetooth, iOS 7, Mechatronics       
Preferred Location: United States

J****Hon
 [?]
Sign in to view client's details.
| J****Hon
|    United States
Fixed Price: $300 - $1,200   |  Posted: Jul 05, 2014  |  Ends: 10d, 8h  |   2 Proposals
DESIGN PCB, Spec. Source parts, and Assemble PCB for Toy Motor control; Program Firmware; AND (Option #1) a handheld RF Remote Control (with key pad and 20-digit-LED Displays), OR (Option #2) iOS/Android Remote Control App via Bluetooth. (PREFERRED) GENERAL DESCRIPTION OF PROJECT Using off-the-shelf parts/components as much as possible, create specifications, program firmware, configure and assemble the control/power electronics for a device roughly equivalent to, but somewhat more sophisticated than, a Remote-control wheel-driven Toy. The device will include: - Stepper or geared electric motor - programmable clock/calendar Function for scheduling motor-on-events, - one LED Alpha-numeric 20 digit (on RF Remote) - one LED 3-digit Display (On toy device) - a Count-Down-Timer function, - a sound/tone generator, with user Selectable-assignable tones. - a vibration generator (as found in cell phone) - Firmware settings for defaults and user prefs (e.g., time intervals, event-s...
Category: Other - Engineering &...       
Skills: Android, Electronics, Bluetooth, iOS 7, Mechatronics       
Preferred Location: United States

J****Hon
 [?]
Sign in to view client's details.
| J****Hon
|    United States
Fixed Price: $1,000 or less   |  Posted: Jul 03, 2014  |  Ends: 8d, 8h  |   22 Proposals
7/8/14 UPDATED: Total Area needed design is about 1.2 Acres. The back 2.3 acres will remain a pasture for livestock. See new attached PDF file. We are moving to a 3.5 Acre property with a 1,750+ sf house. The property has lots of potential, but requires the services of a competent and experienced Landscape Design Architect. The Landscape Design requirements will include utilizing the full potential of the old growth hardwood trees, barn, open back and front yards, blueberry bushes and other features of the property. All new plants and design elements must be low/medium maintenance, locally available (will drive as far as Atlanta if Absolutely needed) and be WELL suited to the year round climate of Houston County, Georgia. Videos   [obscured]  /OfCY9IO8ltE   [obscured]  /fSqbpw4jBdg Photo Album   [obscured]  /1qDlyQL In short the mission statement could be summarized in three ideas: Encourage outdoor play for young children Enable "farm-to-table" food growth Invite all...
Category: Architecture       

T****ter
 [?]
Sign in to view client's details.
| T****ter
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 3-4 weeks  |  Posted: Jun 27, 2014  |  Ends: 1d, 21h  |   0 Proposals
Application needed for soft launch application. Particulars and design will be conveyed to developer chosen Features: Geo-location In-app messaging Picture upload User Profiles User privacy User create login Rating System Admin Features: Moderation Data-base control/ User administration Content management system Reporting
Category: Contract Manufacturing       
Skills: Android, iPhone, iOS       

k****fee
 [?]
Sign in to view client's details.
| k****fee
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 26, 2014  |  Ends: 1d, 5h  |   21 Proposals
I am looking for someone I can work with to create a Bluetooth Sensor that will record and send information to a mobile app (both android and IOS) similar to fitness sensors but for a different purpose
Category: Product Design       
Skills: Manufacturing Design, Electronics, Wireless       

l****ffa
 [?]
Sign in to view client's details.
| l****ffa
|    United States
Fixed Price: Not Sure   |  Posted: Jun 22, 2014  |  Ends: 12d, 6h  |   13 Proposals
Hi I am looking to add wifi to existing precision scale   [obscured]  /UNISHOW%C2%AE-Digital-Precision-Jewelry-Reload/dp/B00AN44MJI/ref=sr_1_2?ie=UTF8&qid=1403459866&sr=8-2&keywords=precision+scale+0.01g Need to design a PCB and attach to existing scale with additional LEDs(6 LEDs) Also need to provide Andriod and iOS App to get weight info , on off LED Scope included 1. Design schematic, PCB 2. 2-prototype 3. Apps 4. 3D Models 5. Mechanical Parts to add-on to scale
Category: Product Design       

p****pro
 [?]
Sign in to view client's details.
| p****pro
|    United States
Fixed Price: Not Sure   |  Posted: May 27, 2014  |  Ends: 34d, 23h  |   5 Proposals
Product: Development of a SDK/library which will enable data transmission between speaker/Beacon and mobile devices using inaudible ultrasonic waves .The frequency of the waves should correlate to ability of cell phone microphone acceptance (~20KHz) Based on specific Algorithm, develop a SDK/Library that can be embedded by pass-band binary code into IOS & Android app, enabling transmit and/or receive data using audio / ultrasonic Beacons/ cell phone microphone Target specification (not limited to): 1. Baud rate of 250 bps each way 2. Elaborate noise reduction and necessary compensation Algorithm 3. Advanced error correction Algorithm 4. Preference to be Inaudible to humans, but has be frequency that can be 'picked up'/emitted by speaker/mic of most smart phones. Usable frequency band should not exceed 20.6 Khz, as a set maximum. Technology Requirements : (The techniques of development has to be disclosed by developer) some are listed below: 1. Encoding scheme including t...
Category: Electrical       

h****mtk
 [?]
Sign in to view client's details.
| h****mtk
|    Jordan
Fixed Price: Not Sure   |  Posted: Apr 21, 2014  |  Ends: 51d, 4h  |   0 Proposals
I need to add some features for my "Ali Baba escapes the thieves", 1- android in-app purchase, to purchase the same items as in iOS, 2- to have 3 additional characters A- Camel, and the powerdup character is aflying Camel B- Eagle, and the powerdup character is an Eagle with 2 Jet engines and trails- the engines should be visible enough C- Old fashion Woody Bicycle , look at this model (exactly what i think)   [obscured]  /albums/ae256/pbrown8js/woody2_zps0d501c3c.jpg and the powerdup will be the same with wings to fly.. 3- to have 3D intro video played right after loading the game, user should be able to skip this video (it should be an amazing intro, invites user to play : ) Bader
Category: 3D Modelling       
Skills: 3D, Android, iOS       

b****asy
 [?]
Sign in to view client's details.
| b****asy
|    Israel
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job