Save this Search
     
Sort by:
  • Posted Date
Fixed Price: $20 - $25   |  Posted: 22 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
I need a few models to be modeled. Some have blueprints some don't. I need the model made in .3ds format. I require a medium amount of detail on the vehicles. I will provide references.
Category: 3D Modelling       
Skills: 3D Modeling       

J****a25
 [?]
Sign in to view client's details.
| J****a25
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 22 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
doctor, physician, family doctor, general practitioner; eye specialist, ear specialist, throat specialist, heart specialist; cardiologist, surgeon, pediatrician, psychiatrist, dentist, dietician, pharmacist, veterinarian; nurse, paramedic;
Category: Electrical       

d****9df
 [?]
Sign in to view client's details.
| d****9df
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: 28 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
master inspection electrical. knowledge of electric construction and national electrical codes and variances.
Category: Electrical       

c****y44
 [?]
Sign in to view client's details.
| c****y44
|    United States
Fixed Price: Not Sure   |  Posted: 33 minutes ago  |  Ends: 6d, 23h  |   0 Proposals
I am looking to have a few sample floor plans for five possible layouts on a 12-14 ft wide townhouse remodel that I am considering. The sample floor plans need to have furniture on the plans to gauge room dimension and possible layouts. The selected floor plan(s) could eventually be made into actual engineering drawing so please detail the software to be used and final product needs provide any necessary files that could be used in later development. Plans are for: 1. Three story ? 3 bedrooms(with huge owner suite on one of the top levels) ; 2.5 Bath(half on 1st floor, full on 2nd & 3rd) ~ 650 sq ft per floor 2. Three story - 5 bedroom( 3 & 2 top levels); 2.5 Bath(half on 1st floor, full on 2nd & 3rd) ~ 650 sq ft per floor 3. Three story ? 4 bedrooms(2 on each top level); 2.5 Bath(half on 1st floor, full on 2nd & 3rd) ~ 650 sq ft per floor 4. Three story - 3 bedroom; 2.5 Bath ~ 450 sq ft per floor 5. Two story - 2 bedroom; 2.5 Bath ~ 600 sq ft per floor A exampl...
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

t****123
 [?]
Sign in to view client's details.
| t****123
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 34 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
doctor, physician, family doctor, general practitioner; eye specialist, ear specialist, throat specialist, heart specialist; cardiologist, surgeon, pediatrician, psychiatrist, dentist, dietician, pharmacist, veterinarian; nurse, paramedic;
Category: Contract Manufacturing       

r****in0
 [?]
Sign in to view client's details.
| r****in0
|    Brazil
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 1h, 0m ago  |  Ends: 14d, 22h  |   0 Proposals
president, vice-president, executive officer (CEO); director, deputy director, managing director, financial director, marketing director; general manager, assistant manager, manager; personnel manager, production manager, marketing manager, sales manager, project manager; supervisor, inspector; Office
Category: Chemical Engineering       
Skills: Sales, Marketing       

b****qsh
 [?]
Sign in to view client's details.
| b****qsh
|    United States
Fixed Price: $500 - $1,000   |  Posted: 1h, 5m ago  |  Ends: 14d, 22h  |   0 Proposals
This is an app allowing other people do like others photos and get likes and maybe followers havent really thought of it. You post a pic and each like you want cost 2 coins and you can also buy coins to get likes if you dont want to spend alot of time liking photos
Category: Other - Engineering &...       
Skills: Architecture, .NET Framework, .NET for Web       

o****i16
 [?]
Sign in to view client's details.
| o****i16
|    United States
Fixed Price: Less than $500   |  Posted: 1h, 35m ago  |  Ends: 14d, 22h  |   1 Proposal
I need solution for problem 6-17 and A-3 of the book.Please contact me if you can help me out.I need solution with in next three days!!
Category: Mechanical       

B****hTM
 [?]
Sign in to view client's details.
| B****hTM
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 1h, 36m ago  |  Ends: 14d, 22h  |   0 Proposals
The client is requesting quotation for the construction of a wooden box with drawers. The apparatus is to have 2 drawers with a hinged compartment on the top of the box for additional storage. Quantity of 5000.
Category: Contract Manufacturing       
Skills: Mechanical Design, Manufacturing       

B****Inc
 [?]
Sign in to view client's details.
| B****Inc
|    United States
Fixed Price: $150 - $250   |  Posted: 1h, 47m ago  |  Ends: 2d, 22h  |   0 Proposals
I'm in need of an experienced Landscape Designer to a complete a set of landscape land which includes Lighting, Irrigation and drainage plans. Experience and creativity a must!
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       

t****079
 [?]
Sign in to view client's details.
| t****079 *
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: 2h, 43m ago  |  Ends: 14d, 21h  |   1 Proposal
I have plans for wooden products that needs to be turned into 3D designs. The plans will be uploaded to   [obscured]   There for the designs need to match the specs laid out by Ponoko.com. Here is more information about the website and their rules.   [obscured]  /starter-kits/design-rules-3d
Category: 3D Modelling       
Skills: 3D, 3D Modeling, AutoCAD, Blender, 3D Printing       

L****oks
 [?]
Sign in to view client's details.
| L****oks
|    United States
Fixed Price: More than $10,000   |  Posted: 3h, 2m ago  |  Ends: 14d, 20h  |   1 Proposal
We are looking for someone who develops hardware and software because its his/her hobby. We want to know what projects you have worked on. We will talk to you in detail and make a determination if you are right fit. If you have played with ST-ARM processor(s), WiFi, NAND flash, or sensors we would like to know more about you. We care more about level of expertise you have in embedded systems. We are looking for rightly motivated, flexible, and resourceful, embedded software developer. If you fit this description, please send us details of your past fun/hobby projects.
Category: Electrical       
Preferred Location: United States

g****ved
 [?]
Sign in to view client's details.
| g****ved
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 3h, 3m ago  |  Ends: 29d, 20h  |   0 Proposals
I have an existing 3D system design consisting of multiple parts and assemblies that can be imported into Autodesk Inventor using STP file formats. All of the work will be subject to a Non-Disclosure Agreement, which must be signed before specific details on the tasks can be provided and before the work starts. The needed support tasks are to: 1. Use a subset of the existing 3D parts and build a simplified model for use in performing stress analysis (FEA) and motion analysis. 2. Perform stress analysis on the model using the specified material properties for each part, with a specified set of boundary conditions and forces to be applied. 3. Related to #2, use the model to build a simulation of how the parts move as increasing force is applied. NOTE: I have access to Autodesk Inventor 2015, which includes the stress analysis and motion analysis capabilities. If the consultant does not have the required analysis capabilities, it may be possible to accomplish task #2 and #3 intera...
Category: 3D Modelling       

H****Hdz
 [?]
Sign in to view client's details.
| H****Hdz
|    United States
Fixed Price: $500 - $1,000   |  Posted: 3h, 9m ago  |  Ends: 14d, 20h  |   0 Proposals
Varion declares a casing for the new mixer series design competition ABOUT VARIOFIN With our Finnish partners (Variosan, Helsinki) we developed a new type of mixers that increases our producer's opportunities in creating of a new fresh design. About equipment: a technological frame made of brass without a galvanic covering is in a casing made from polymeric material with a chrome-nickel covering done by electroplating method. The casing has an important thermal quality. We avoid brass buffing when we make a casing from firm plastic. Such a type of production is safer for people who buff details manually and for local environment. Besides, with these casings we can increase the volume of mixers without using a lot of material, we have an opportunity to create clearer geometric forms and achieve the absolute symmetry. Some casing designs will be on sale, so a consumer will be able to exchange an old casing for a mixer easily without taking apart a mixer from a wall (even without turni...
Category: Product Design       

v****ren
 [?]
Sign in to view client's details.
| v****ren
|    Russia
Fixed Price: $1,500 - $2,000   |  Posted: 4h, 10m ago  |  Ends: 14d, 19h  |   4 Proposals
Circuit/ PCB design of microcontolled device (Device) to add functionality to existing legacy system by simulating 1) the output state of nine existing legacy Binary Decoders, using legacy 5v inputs, and 2) the state of an 8x8 switch matrix using 16 legacy 5v inputs. Then, based upon the simulated decoder output and matrix states, take user defined actions, such as playing specific sound bites, and/or playing a sound loop from an SD card, all while passing through legacy analog sound inputs, and/or altering the high/low condition of 15 Device-controlled outputs. Software work to follow successful hardware design.
Category: Electrical       
Preferred Location: North America

w****ket
 [?]
Sign in to view client's details.
| w****ket
|    United States
Fixed Price: Less than $500   |  Posted: 4h, 33m ago  |  Ends: 14d, 19h  |   7 Proposals
Need a floorplan redrawn and modified; I am providing a basic drawing and we have cut and pasted over it to get it the way we want, it should be traced and improved, I do not have the dimensions. Looking for a completed project to be crisp. The outer wall where there are 3 bedrooms needs to remain, I understand the interior walls will overlay on the two windows. Please provide 2-3 examples of your work. Budget is less than $50 for this one. Could be more work depending on quality and time.
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

a****tcl
 [?]
Sign in to view client's details.
| a****tcl
|    United States
Fixed Price: $20 - $30   |  Posted: 4h, 58m ago  |  Ends: 19h, 1m  |   3 Proposals
Due to an expected increase in workload, I am looking for someone who can take a blueprint provided by me and turn it into a 3D model following my specifications. You will be doing something similar to this:   [obscured]  /watch?v=EIT2e7N995c&hd=1 I'll provide you a car blueprint, car measurements, etc and I need a 3D model back. As you can see it's a quite easy job. Software: Catia V5 Version: R20 or earlier Deadline: next Monday (28/04/2014) Catia V5 knowledge (surface modelling, assembly...) Ability to read and interprets blueprints Ability to work independently Good attention to detail Ability to meet deadlines and recognize discrepancies ONLY CATIA V5 I'll be hiring in the next 10 hours, so please drop me a line explaining your Catia V5 knowledge/experience. Have you ever done something like this before? I'll need someone long term, I have a number of similar things to do. So please bid for this very first model. I'm looking forward hearing from you!
Category: CAD       
Skills: 3D Modeling, catia v5       

p****785
 [?]
Sign in to view client's details.
| p****785
|    United Kingdom
Fixed Price: $500 - $1,000   |  Posted: 5h, 15m ago  |  Ends: 14d, 18h  |   0 Proposals
This Job is urgent, please inform us if you can't deliver before the 5th of May A written piece is required(60-70 pages) include: Literature review on Surface roughness assessment. Main body is an investigation into various machine vision strategies to improve their performance, repeatability and reliability. Work should concentrate mainly on texture parameters derived from magnified images of the surface topography under fixed illumination conditions(will be provided). Results will be compared to conventional stylus and whole-field methods. Methods in comparison are: Local binary pattern LBP, and Gray Level Co-occurence Matrix GLCM. Practical work will be provided, analysis and write up required.
Category: Mechanical       

a****li9
 [?]
Sign in to view client's details.
| a****li9
|    United Kingdom
Fixed Price: $1,000 - $5,000   |  Posted: 5h, 53m ago  |  Ends: 6d, 18h  |   0 Proposals
Structural engineering services (including site visit) and drawings suitable for submission to NYC dept of buildings to extend a single story commercial building as per the attached plan. Must be licensed engineer recognized by NYC.
Category: Civil & Structural       
Preferred Location: United States

J****hen
 [?]
Sign in to view client's details.
| J****hen
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 6h, 24m ago  |  Ends: 29d, 17h  |   3 Proposals
Dear all, i need someone to help me with solving the three documents questions and i will attach that here regards
Category: Other - Engineering &...       

s****988
 [?]
Sign in to view client's details.
| s****988
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: 6h, 41m ago  |  Ends: 14d, 17h  |   2 Proposals
Kinsa (  [obscured]  ) is looking to design another groundbreaking product. We need an excellent product designer to work with our in-house designer modeling an object that is aesthetically stunning and practical to build. You should have experience taking products from concept to reality. You'll help bring our concepts from 2d sketches to 3d models so we can evaluate them, and your eye for design should make that transition beautiful. On completion, you'll make sure our manufacturer has production-ready assets. Experience with consumer product design is preferred.
Category: Product Design       

l****iam
 [?]
Sign in to view client's details.
| l****iam
|    United States
Fixed Price: $500 - $1,000   |  Posted: 6h, 48m ago  |  Ends: 14d, 17h  |   10 Proposals
I'm looking for a bit of help on a project. I need some renderings of a product that we have only proven the concept for at this point. It's a wireless water management system. We have proven that the technology works and so now we are looking at having to go out and find phase 2 funding. That being said, nothing tells a story like a great picture. Full disclosure I'm not exactly sure what I need. I know that I need 1. a controller box and beyond that I'm not sure what else I will need. I'm hoping that you will have a project brief that can help on this. Also would you be willing to sign a NDA? Thanks for your patience. I look forward to hearing from you. Best, Louise
Category: Product Design       

l****826
 [?]
Sign in to view client's details.
| l****826
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: 6h, 52m ago  |  Ends: 14d, 17h  |   0 Proposals
. During undergraduate period I have been engaged with some construction site for high building with Kontakt. com , Orioni.com ect and I have high result in bachelor and master science for construction engineering too. Currently Im employed in Pespa Group.com as construction engineering for prefabricated villas and silos for Europe (Austria , Germany, Switzerland etc).
Category: Civil & Structural       

M****mir
 [?]
Sign in to view client's details.
| M****mir
|    Albania
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job