Save this Search
     

All Jobsmicro-controller

 (332 results)  
Sort by:
  • Posted Date
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: Jul 02, 2015  |  Ends: 13d, 15h  |   10 Proposals
I would like to develop a cross platform mobile application which will be catered towards a smart home solution. The user of the application can control the following equipment(s) by means of micro controller with motherboards including hardware/sensor using the smartphone. 1. Lights & Fans- A light i.e. fluorescent lamp, LED lamp, spotlight and any other lightning device can be controlled as the ON/OFF feature. And for the table fan, ceiling fan can only be controlled as ON/OFF and regulation of the device likes the speed of the fan control. 2. A/C & CCTV- Air Conditioner has the following features to control- ON/OFF, Mode Control, Fan speed of A/C control; and more over temperature control. Infosolz will be liable to deliver the mobile app with these controlling features of A/C. In case of CCTV, ON/OFF, and Zoom In/ Zoom Out will only work through the mobile application. 3. Doors- Doors can only be checked and make them OPEN/CLOSE and be controlled from the mobile applicati...
Category: Mobile Applications       

i****olz
 [?]
Sign in to view client's details.
| i****olz
|    India
Fixed Price: Not Sure   |  Posted: Jun 25, 2015  |  Ends: 6d, 21h  |   7 Proposals
This is phase 1 of the project. Writing VHDL code to convert 12 K hz to 40 K hz HS video signals to standard VGA video signals using a FPGA and external RAM for screen display. Input signals will be digitized for the FPGA from a Analog AD9880-KSTZ-150, On screen display ( OSD)and input processed by a STC12LE5624AD micro controller. Input signals to be converted are STYLE (RGB(A), RGB(D), SOG, YUV, RGBS, RGBHV and YPbPr). OSD control will have Horz. position, width, Vert. position, height, phase, sync ( separate HV, composite HV, SOG and YUV. Resistance setting (75 ohm, 750 ohm) Scanning (progressive, interlaced).Screen resolution ( 640 X 480 and 800X600). Also in the OSD window it will show in real time the VS and HS input frequency. THE OSD function will display on default when no signal is present and have a time out to close when not being used. We will supply a prototype board for testing the VHDL code via a JTAG interface. And will provide a schematic of the prototype.(ID: 74...
Category: Other - Engineering &...       
Skills: Verilog / VHDL       

r****103
 [?]
Sign in to view client's details.
| r****103
|    United States
Fixed Price: Less than $500   |  Posted: Jun 22, 2015  |  Ends: 3d, 23h  |   4 Proposals
Hi there I am currently working on a project that runs with an MCU, my current setup (adjustment) require the user to change the setting of the MCU through a 16 position hex rotary switch. I would like to upgrade this part of project and adjust the muc through an ANDROID APP over TCP Socket. note: the ESP-12 is connected to an STM32 microcontroller over TX/RX ports. Please bid reasonably.. Thanks
Category: Mobile Design       
Skills: Android, iPhone App Development, Java, TCP/IP       

h****omy
 [?]
Sign in to view client's details.
| h****omy
|    China
Fixed Price: $80 - $99   |  Posted: Jun 20, 2015  |  Closed  |   10 Proposals
We are looking for an engineer that is good in the area of designing, creating assembling drawing of CNC machine using Autocad and Inventor simulation likewise manufacturing cheap and reliable CNC machine of various size secondly we want a good engineer good in the world of automation using micro controller and stepper motor .
Category: Product Design       

t****007
 [?]
Sign in to view client's details.
| t****007
|    United States
Fixed Price: Not Sure   |  Posted: Jun 18, 2015  |  Ends: 2h, 59m  |   7 Proposals
Hello ? We have a two phase project that requires an expert with a M2M device control over satellite experience/ background to design a detailed schematic to turn on/off existing simple piece of hardware (self-powered) as needed over a satellite constellation from a work station computer. This detailed schematic will need to show the end-to-end M2M solution and detailed diagrams of all components and their interaction. We will provide the simple schematic of the device that needs to be controlled/"power on/off" through an accessible wiring harness and/or inline power switch or micro-controller over and existing satellite constellation (Iridium/Inmarsat). The device is self-powered and has an existing tri-band antenna. (Avionics/Aerospace engineering background helpful but not necessary) Phase two is to build the prototype(s) and merge with said devices which can be used to demo to Avionics/Aerospace team on a desktop version or over Iridium SDK . We are receptive to h...
Category: Other - Engineering &...       
Preferred Location: North America, Western Europe, Eastern Europe, India/Southern Asia

T****oup
 [?]
Sign in to view client's details.
| T****oup
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Jun 15, 2015  |  Closed  |   18 Proposals
GPS wearable device using PIC micro controller that tracks user position and sends data via API commands. Deliverables include a prototype, hardware layout in Eagle CAD and firmware in C. - Tracks user position and reports back to database in specified API command structure. - Uses Multiple Digimesh modules to increase position accuracy (XBEE XBP09-DP) - Onboard Gyro to increase accuracy and improve efficiency - Has onboard MRF49XA to accept inputs from existing external devices
Category: Electrical       
Skills: GPS Development       

****
 [?]
Sign in to view client's details.
| Client
|    United States
Fixed Price: Less than $500   |  Posted: Jun 15, 2015  |  Closed  |   6 Proposals
Software engineer needed that develop an efficient XBEE API data structure for use in a wide area control and data network. End units are battery powered so efficiency is a must. Candidates should demonstrate proficiency with XBEE, C for PIC Micro Controllers, LINUX Command Line, Java Script, Python, and HTML. Functional Spec: Software GUI for control based on provided graphic designs Discovers Network/ Logs active devices in database Polls Devices Sends user specified API commands Hardware: XBEE DM09 Raspberry PI Remote units with XBEE DM09 and PIC18
Category: Software Application       
Skills: C, Javascript, API Development, Database, ARM       

****
 [?]
Sign in to view client's details.
| Client
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 10, 2015  |  Closed  |   7 Proposals
I need a resource that has experience with ESP-12 (8266). I want you to get this device to interact with a color touch screen without utilizing an additional micro controller. I would like the touch screen to be 4" to 5" in size. You can use SPI, I2C or what ever GPIO pins you need that are available on the ESP8266.
Category: Electrical       

****
 [?]
Sign in to view client's details.
| Client
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 05, 2015  |  Closed  |   26 Proposals
Design hardware, Schematic Capture, and PCB Layout. We're developing a low power Micro-controller solution that can fine control small DC or Stepper motors using potentiometer as feedback. The motors are confined to a 270 degree rotation limit. A shiftless potentiometer is integrated with the motor to return position-feedback. The device has a 9v input. The primary areas of development are, power hardware/management, motor control/driver. Consideration for noise, power are primary concerns. If you are able to do the software as well, that's a huge plus. But the primary scope of this project is the hardware design and development.
Category: Electrical       

p****332
 [?]
Sign in to view client's details.
| p****332 *
|    United States
Fixed Price: $50 - $100   |  Posted: Jun 03, 2015  |  Closed  |   1 Proposal
I need a small firmware for that accesses the omnivision ov7670 camera image/video data on a micro controller (attiny or STM32 or even arduino would be ok). The exact device I have is:   [obscured]  /item/640x480-Pixel-lens-OV7670-CMOS-Camera-Module-24p-Socket-2-5V-3-0V-Hot-Sale/32268661124.html
Category: Other - Engineering &...       

u****mir
 [?]
Sign in to view client's details.
| u****mir
|    United States
Fixed Price: $500 - $1,000   |  Posted: May 25, 2015  |  Closed  |   18 Proposals
Looking for someone to work on a micro-controller based control system for weight sensors, LCD and soft switch based input systems, and electrically controlled valve systems. Will provide more and accurate details after NDA is signed.
Category: Electrical       
Skills: Electronics       

R****nda
 [?]
Sign in to view client's details.
| R****nda
Fixed Price: Less than $500   |  Posted: May 23, 2015  |  Closed  |   31 Proposals
I am looking for instructions on designing a LED wired circuit. I currently have most of the parts and need instructions on how to connect them and make them work. I want to connect some RGB LED to the micro controller to be able to control the color. I am not sure what order or what resistors to use and where.
Category: Electrical       

p****dig
 [?]
Sign in to view client's details.
| p****dig
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 18, 2015  |  Closed  |   27 Proposals
In order to validate the functionality of all components of my circuit, I am looking for a circuit and PCB designer which can do the circuit refine, design and prepare the PCB boards. To give you a general overview of the circuit: it is basically the whole supply of the circuit which consist of a solar-cell charger and a 9V battery which must provide us a 3.3V output for the micro-controller, a 5 V and 100mA to drive a solenoid and a 5V and 500 mA for a USB charger. I have used 3 ICs made by Linear Technology, which I can provide you with all their datasheets and information if it is needed. Regards, Sanaz Haddadian
Category: Electrical       

S****adn
 [?]
Sign in to view client's details.
| S****adn
|    Germany
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 12, 2015  |  Closed  |   25 Proposals
I'm looking for an outstanding professional that has experience integrating Sensors, Arduino/Raspberry kits (micro-controller unit), various communication protocols such as Wi-Fi, Bluetooth, Zigbee, GSM/LTE and cloud storage. In short, the person should have excellent hardware design and software programming capabilities. The job requires the following: 1: Creation of a prototype that can acquire different data sets through special sensors and utilize MCUs that transfer data-set to the cloud using an appropriate communication method 2: Build software ports so anyone with proper credentials can access the data-set using API programming 3: Apps to be created for iOS/Android 4: Two-three page write-up/documentation of the completed work 5: The circuitry in the prototype should be robustly designed to absolutely minimize defects & 6: Finally, the design should be conducive for mass-manufacturing. This project is one of a kind and I'm looking for people that are highly imagin...
Category: Electrical       
Skills: Electrical Engineering, Electronics       

B****V30
 [?]
Sign in to view client's details.
| B****V30
|    United States
Hourly Rate: $40 - $50 / hr   |  Duration: 7-9 months  |  Posted: Apr 27, 2015  |  Closed  |   41 Proposals
Looking for someone to help me design and prototype over 20 different micro-controller boards and modules. Details will be disclosed to winning bid.
Category: CAD       
Skills: 3D Modeling, AutoCAD, Manufacturing Design       

c****ync
 [?]
Sign in to view client's details.
| c****ync
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 16, 2015  |  Closed  |   11 Proposals
Update: After a long discussion with my insurance agent, I've removed the design insurance requirement. I am looking for a electronics design partner to create two printed circuit boards for a robotic lawnmower. I am price conscious and interested to learn about any price trade-offs that are available. I believe I want two boards as follows: The base station should contain a PCB that is AC powered using an external transformer. It should have basic location capabilities, an RF transmitter, a modulated infrared light, and provide power to charge the robot unit. The robot should contain a PCB that is battery powered. It should contain a micro-controller, multiple motor drivers, battery management, GPS capabilities, an RF transceiver, and infrared sensors, a small LCD touch screen, sound generation, and several sensors including one or more cameras. These boards should be in compliance with relevant US and EU regulations and standards. You should produce basic software for the sy...
Category: Electrical       

p****cts
 [?]
Sign in to view client's details.
| p****cts
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 09, 2015  |  Closed  |   9 Proposals
Hi I am looking to hire a programmer who can help me with displaying text/pictures in LCD display using mobile app and Bluetooth connectivity Job Description: We are looking for a talented Micro Controller/Mobile Application Developer who will be responsible for the design, development and deployment of our project Your responsibilities: - Review and perform a technical analysis of requirements - Produce a solid, detailed technical design - Write clean, modular, robust code to implement the desired requirements - Contribute ideas for making the application(s) better and easier to use Your qualifications: - A work style that is extremely detail oriented - At least 5 + years of experience in above requirement - References or an established Elance reputation preferred
Category: Mobile Applications       

s****shb
 [?]
Sign in to view client's details.
| s****shb
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 09, 2015  |  Closed  |   8 Proposals
Hi I am looking to hire a programmer who can help me with displaying text/pictures in LCD display using mobile app and Bluetooth connectivity Job Description: We are looking for a talented Micro Controller/Mobile Application Developer who will be responsible for the design, development and deployment of our project Your responsibilities: - Review and perform a technical analysis of requirements - Produce a solid, detailed technical design - Write clean, modular, robust code to implement the desired requirements - Contribute ideas for making the application(s) better and easier to use Your qualifications: - A work style that is extremely detail oriented - At least 5 + years of experience in above requirement - References or an established Elance reputation preferred
Category: Mobile Applications       

s****shb
 [?]
Sign in to view client's details.
| s****shb
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: Apr 07, 2015  |  Closed  |   24 Proposals
We are in need of an individual or company skilled in Microcontroller Programming using a CCS compiler. The micro controller we are using is a Microchip PIC18F67J60-I/PT. Familiarity with FPGA programming is a plus, but not necessary. The PIC will communicate with a Spartan-6 FPGA chip and Microchip RN-171 WiFly module. We have source code for the existing firmware, however we need updates and debugging to the existing codebase. Time sensitive requirements with possibility for a long term relationship.
Category: Other IT & Programming       

A****Y14
 [?]
Sign in to view client's details.
| A****Y14
|    United States
Fixed Price: Not Sure   |  Posted: Apr 04, 2015  |  Closed  |   9 Proposals
Need someone who can who knows verilog / vhdl programming , micro-controller architecture, Digital design etc. I am looking someone who can design a micro-controller using HDL, details will be given later. please relevant experience while applying.
Category: Electrical       
Skills: Electronics, Verilog / VHDL       

s****ath
 [?]
Sign in to view client's details.
| s****ath
|    India
Fixed Price: $500 - $1,000   |  Posted: Apr 03, 2015  |  Closed  |   4 Proposals
Require an Embedded C Programmer on an urgent basis for a single project. Following are salient points to note: 1. Application Programming To 'PIC24FJ' series micro controller (PIC24FJ256GB110) as per flowchart 2. RTC code 3. USB communication code 4. I2C communication code 5. PIC16f1509 I2C communication code The provider should be located in Mumbai, Pune or neighboring areas only, or should be ready to relocate for this project at his/her own expenses. The coding exercise will be a maximum of 30-45 days only. The maximum budget for this work is USD 550.
Category: Other IT & Programming       
Preferred Location: India

s****ept
 [?]
Sign in to view client's details.
| s****ept
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 02, 2015  |  Closed  |   16 Proposals
Develop a small (less than 30mmx30mmx10mm) RF transmitter with low power consumption, coin battery powered, that transmits it's own ID number (24 bit) each X (Programmable) seconds. With integrated PCB Antenna. With option for temperature sensor and accelerometer) Also the receiver radio with ethernet, serial and wigand output. Radio should be capable of read at least 50 transmitters working all together. Desired range 50 m Battery should last 3 years. Desired IC for transmitter is PIC12F529T39A Deliverables: Diagram, PCB file in orcad or other, Gerber files, component list, manufacuting instructions, micro controller program preferible in CCS or C. Please submit estimated time with your proposal.
Category: Product Design       

s****a99
 [?]
Sign in to view client's details.
| s****a99
|    Mexico
Fixed Price: Less than $500   |  Posted: Mar 31, 2015  |  Closed  |   11 Proposals
a complete project full documentation to the simplest details.all must be in english. project : automated greenhouse system that monitors and controls all the operational conditions of the greenhouse , temperature, humidity, irrigation , security , fertilization possibly more. job must be done with an arduino micro-controller and must communicate with operator and be monitored and controlled remotely...
Category: Product Design       
Skills: Research, Electronics, Microcontroller       

m****ode
 [?]
Sign in to view client's details.
| m****ode
|    United States
Fixed Price: Not Sure   |  Posted: Mar 28, 2015  |  Closed  |   9 Proposals
Embedded Systems Engineer needed to develop a Wearable GPS Navigation device for Startup. The device should include micro controller, GPS receiver, accelerometer, and flexible display. Should be capable of storing approx 100MB in map data.
Category: Contract Manufacturing       
Skills: Embedded Systems       

s****795
 [?]
Sign in to view client's details.
| s****795
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 27, 2015  |  Closed  |   5 Proposals
Embedded Systems Engineer needed to develop a Wearable GPS Navigation device for Startup. The device should include micro controller, GPS receiver, accelerometer, and flexible display. Should be capable of storing approx 100MB in map data.
Category: Contract Manufacturing       
Skills: Embedded Systems       

s****795
 [?]
Sign in to view client's details.
| s****795
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job