Save this Search
     

All JobswritingEngineering & Manufacturing

 (20 results)  
Sort by:
  • Posted Date
Engineering & Manufacturing
Fixed Price: Less than $500   |  Posted: 8h, 9m ago  |  Ends: 14d, 14h  |   1 Proposal
I need u to use arena simulation software and save a screen shot of every step And then write analysis part in microsoft word Thanks u Submission Instructions: ? For this laboratory assignment, you are expected to do the following three exercises. Make sure you address all parts of the question and provide appropriate answers to the questions as stated. Attach a coversheet to your Assignment, with your full name and student number clearly indicated. ? Hardcopy submission of report answering these three questions. For each question include Purpose, Objectives, Model overview, Parameter values, Results (Statistics), Analysis of Results/Interpretation, Conclusions and Recommendations. ? Also submit one CD or USB containing the three .doe model files only. Note: this will not be returned. Each question is worth 15 marks, for a total mark out of 45. This assessment is worth 10% of your mark for ENGG953 in total. Question 1 (15 marks). An insurance application arrives into a system with ...
Category: Other - Engineering &...       

n****oll
 [?]
Sign in to view client's details.
| n****oll
|    United Arab Emirates
Fixed Price: $500 - $1,000   |  Posted: 16h, 51m ago  |  Ends: 2d, 7h  |   3 Proposals
We need someone to take all of the current published standards and our published policies and counterfeit specifications that are listed on our website and incorporate them into one manual. We will be able to supply all of the supporting documentation/standards and manual needs to cover each and every requirement that is listed in three different standards.
Category: Electrical       
Skills: Technical Writing       
Preferred Location: North America

N****ter
 [?]
Sign in to view client's details.
| N****ter
|    United States
Fixed Price: Less than $500   |  Posted: Feb 27, 2015  |  Ends: 23h, 52m  |   5 Proposals
I need some data analysed regarding petroleum technology. the task involves a recently launched taskforce to venture into a newly discovered oil reservior. i can send the data, but due to the sensitive nature of this project, this will only be sent to the hired freelancer.
Category: Other - Engineering &...       

S****ays
 [?]
Sign in to view client's details.
| S****ays
|    Kenya
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 27, 2015  |  Ends: 13d, 15h  |   1 Proposal
We are a plastic rotational moulding business which is looking to grow via introduction of new products. Rotational moulding is a low volume process and lends itself to products such as water tanks, IBC's, drainage channels, grit bins, material handling products on building sites, street furniture etc...... We will guide you in terms of the products we would like to research and design. Therefore the role will involve: - researching the market for that product i.e. current designs, who are the competition, what are the price points, what is good and bad in terms of existing products in the market; - field research i.e. talking to purchasers of that product and understanding what is good and bad about the existing products in the market. Observing how the products are used; - designing the product using 3D CAD software; - understanding the cost of then producing that part (assistance will be given in this area) and the cost of the tooling; - Writing a report to senior management se...
Category: Product Design       
Preferred Location: United Kingdom

T****y68
 [?]
Sign in to view client's details.
| T****y68
|    United Kingdom
Hourly Rate: More than $50 / hr   |  Duration: 4-6 months  |  Posted: Feb 26, 2015  |  Ends: 24d, 1h  |   6 Proposals
Substation, electrical distribution for utilities, industrial projects involving HV upto 500kV/MV switchgears, transformers and all other relevant electrical equipment- writing specification/ data sheets, preparation of SLD/schematic/wiring drawings. Coordination with client/vendor on equipment selection and its performance.
Category: Electrical       

h****har
 [?]
Sign in to view client's details.
| h****har
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 25, 2015  |  Ends: 11d, 23h  |   7 Proposals
Hello I need a small article on projectile motion 6-12 pages long with use of math and illustrating concepts with diagrams,plots,tables. Need in 15 hours
Category: Mechanical       
Skills: Academic Writing, English, Mathematics, Physics       

d****bar
 [?]
Sign in to view client's details.
| d****bar
|    India
Hourly Rate: More than $50 / hr   |  Duration: 1-2 weeks  |  Posted: Feb 24, 2015  |  Ends: 22d, 4h  |   4 Proposals
Senior software engineer required. ESSENTIAL THAT THE WORK IS DONE IN OUR OFFICE NEAR BAR HILL< CAMBRIDGE, UK. REMOTE WORKING IS NOT AN OPTION. Must have 10 years of C, C++ or C# experience, writing Windows applications. Also need experience in .NET, be able to manage own time. Initially a short contract but with the possibility to become permanent. The work is to review some existing code and then extend to work with some third party packages. There is some work with generates line graphics and Ethernet communications.
Category: Other - Engineering &...       
Skills: .NET Framework, C#, Windows App Development       
Preferred Location: United Kingdom

G****oft
 [?]
Sign in to view client's details.
| G****oft
|    United Kingdom
Fixed Price: $200 - $600   |  Posted: Feb 24, 2015  |  Ends: 3d, 0h  |   4 Proposals
Working Title: The Power of Material Selection Persona: Design Engineers and Procurement Tone: Technical & Educational Message: This book is for a custom manufacturer and global supply chain management company that has a superior team of engineers who can provide knowledge and tips for selecting the correct raw material for completing a project. Not only can the type of material they are using (aluminum vs. steel, a steel alloy vs. a steel alloy) affect a project, but so can the form and its properties. This eBook will provide a brief overview of these factors, as well as provide examples to show the company's exceptional knowledge in providing solutions that made a project the best it could be. Requirements: We need a technical writer with experience writing for custom manufacturers or an engineering background to produce a short 4-5 page eBook on the above content. An outline will be provided before starting. A draft of the book must be ready in one week. Please provide...
Category: Other - Engineering &...       

e****-th
 [?]
Sign in to view client's details.
| e****-th
|    United States
Fixed Price: Not Sure   |  Posted: Feb 23, 2015  |  Ends: 10d, 8h  |   0 Proposals
Location: Rockland, MA Our client, Globe Composites, is a privately held designer and manufacturer of composite products utilizing advanced materials and processes. Originally founded in 1890, Globe provides turnkey research, design and manufacturing services for industrial, medical, material handling, oil field equipment and military applications. They are currently seeking a driven and ambitious QC Manager to oversee the implementation, maintenance, and improvement of Globe's quality program. Manage all company-wide quality policies, procedures, processes, programs, and practices to assure the company of continuous conformance with all standards and regulations. Position Overview and Job Functions This role is responsible for successfully execute individual projects from concept inception to volume production. Working closely with our customer base, this role will require innovation in formulating, validating and providing custom solutions to our customers' most challenging pro...
Category: Other - Engineering &...       

s****igh
 [?]
Sign in to view client's details.
| s****igh
|    United States
Fixed Price: Not Sure   |  Posted: Feb 23, 2015  |  Ends: 9d, 21h  |   15 Proposals
This project is to develop a sensor network system. The network will consist of many identical but configurable sensors wired together in a daisy-chain. The sensor PCB is already designed but needs to be debugged. Therefore most of the work will be in writing and debugging the firmware. Each sensor module will have a button for configuring the function of the sensor. For example one sensor might be configured to trigger an alarm when a switch closes. There will be approximately 17 commands related to sensor configuration and control. We are not using a standard network protocol. Firmware must be in C for an 8 pin PIC PIC12F1822-I/P-ND. The sensor network cable will have a total length of up to 500 ft so the firmware must consider noise immunity. Confidential details will be provided to qualified applicants after which you can fine-tune your bid.
Category: Electrical       
Skills: Electronics, Microcontroller       

m****log
 [?]
Sign in to view client's details.
| m****log
|    United States
Fixed Price: Less than $500   |  Posted: Feb 21, 2015  |  Ends: 7d, 23h  |   7 Proposals
I wish to get a report to act as a stimulus for the creation of a final report. the report will be on the following topic: "To assess the effect of cooking by boiling on the antioxidants in carrots" The report should contain the following: 1. What is the chemistry underlying this topic eg what are the chemical principles involved, the formulae, equations or calculations that are relevant 2. Details of an experiment which you have undertaken which is relevant to the topic - this should include a description of the experimental procedure followed (including details of any safety measures included. A properly labelled diagram should also be included 3. Include details of any external data relevant to the topic eg statistical data, graphical, numeric or experimental data, internet sourced data, articles or anything else relevant. all data sources should be noted. 4. The data must be assessed and analysed into graphs, tables or other relevant formats. the source of relevant dat...
Category: Chemical Engineering       
Skills: Report Writing, Chemistry       

G****nie
 [?]
Sign in to view client's details.
| G****nie
Fixed Price: Not Sure   |  Posted: Feb 21, 2015  |  Ends: 7d, 23h  |   2 Proposals
Our client, Globe Composites, is a privately held designer and manufacturer of composite products utilizing advanced materials and processes. Originally founded in 1890, Globe provides turnkey research, design and manufacturing services for industrial, medical, material handling, oil field equipment and military applications. They are currently seeking a driven and ambitious QC Manager to oversee the implementation, maintenance, and improvement of Globe's quality program. Manage all company-wide quality policies, procedures, processes, programs, and practices to assure the company of continuous conformance with all standards and regulations. Position Overview and Job Functions This role is responsible for successfully execute individual projects from concept inception to volume production. Working closely with our customer base, this role will require innovation in formulating, validating and providing custom solutions to our customers' most challenging problems. Design custom c...
Category: Other - Engineering &...       
Preferred Location: United States

s****igh
 [?]
Sign in to view client's details.
| s****igh
|    United States
Fixed Price: $500 - $1,000   |  Posted: Feb 19, 2015  |  Ends: 6d, 6h  |   1 Proposal
I am interested in designing, developing and manufacturing a RECEIPT size ONLY document scanner proto-type using off-the-shelf electrical and electronics components. Here is a brief functionality description: Upon sensing the paper in the feeder auto start the scan and store the file on SD card in JPG format. There is NO USB port required for file transfer. Only 2 ports required are: for charging the internal battery and the SD card slot. I am developing this proto-type for a project which will require 100 scanners. Upon project success many more scanners will be required. I need quotes for the design, development and delivery (California, USA) for 100 such scanners. If possible, do give quotes for 2-3 variations of the components / functionality. Contact me for any additional considerations needed for making scanner more efficient or cost lesser. Budget in the job description is indicative. The details specs are below. Paper sensor: mechanical or optical Auto launch / scan star...
Category: Electrical       

n****yaz
 [?]
Sign in to view client's details.
| n****yaz *
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 3-4 weeks  |  Posted: Feb 19, 2015  |  Ends: 5d, 20h  |   8 Proposals
I am working on a paper about the design and analysis of drilled shafts. I need an Engineer & Writer who has background in geotechnical engineering to help me finish my paper. Must have knowledge in finite element analysis and Abaqus. Qualified candidates please contact me via email. Thanks.
Category: Civil & Structural       

M****aro
 [?]
Sign in to view client's details.
| M****aro
|    Turkey
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Feb 17, 2015  |  Ends: 3d, 18h  |   94 Proposals
My company is looking for a CAD specialist who can convert handdrawen technical sketches to dwg/dxf files. Requirements: - Company with at least 2 CAD specialists - Expert in CAD - Delivery within 24 hours or faster - Reliable - Expert in understanding and writing English language To test your skills I have a few handdrawen sketches that need to be processed. If you are interested, let me know. Our intention is to develop a long term business relationship with a high skilled team of CAD specialists
Category: CAD       
Skills: AutoCAD, CAD/AutoCAD       

j****uis
 [?]
Sign in to view client's details.
| j****uis
|    Netherlands
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 16, 2015  |  Ends: 3d, 6h  |   8 Proposals
Hello, I am writing, because I noticed your profile and reviews. I would like to prototype a pair of camera glasses with functionality like these   [obscured]  /epiphany-eyewear-not-as-smart-glasses/26949/ the ability to sync to a smartphone via   [obscured]   and which look like like these   [obscured]  /ray-ban-sunglasses-men-and-women/ray-ban-sunglasses-women-2-2/
Category: Product Design       

e****sio
 [?]
Sign in to view client's details.
| e****sio
|    United States
Hourly Rate: $30 - $40 / hr   |  Duration: 7-9 months  |  Posted: Feb 08, 2015  |  Ends: 6d, 4h  |   7 Proposals
Hello, We are a company dedicated to human optimization. Whether that be competing, studying, or performing your best while enjoying your favourite hobbies, we provide humans with the best available products to maximize your potential in a focused state. Our passionate company creates nutritional supplements, and functional foods that helps humans maintain an "in the moment" degree of concentration. Just recently we launched our first product line which includes our nootropic stack similar to products like Alpha Brain, Trubrain, CILTEP and other popular "brain enhancing" formulas. We are also passionate about saying no to caffeine, sugar, fillers and harmful stimulants that can artifiicially enhance concentration. Our nootropic is Non-GMO, Vegan & Vegetarian Friendly, and Gluten free to help provide a clear state of mind in a transparent fashion. Feel free to checkout our website and let us know what you think. RealizedNootropics.com We are looking for a ...
Category: Other - Engineering &...       

J****ser
 [?]
Sign in to view client's details.
| J****ser
|    Canada
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job