Save this Search
     
Sort by:
  • Posted Date
Engineering & Manufacturing
Fixed Price: $50 - $200   |  Posted: 1h, 54m ago  |  Ends: 6d, 22h  |   0 Proposals
Requirements: 1. Input: ac supply 240V 50Hz (a) should be able to accomodate spikes ▒ 10% of voltage 2. Output: 2.2(min)-3.3(max) VDD (a) Max supply rise rates 0.1V/?s (b) Power characteristics {3.3 V,7mA} {2.2V*10mA} (c) designed for automatic cutoff/reset on max voltage and max amps. 3. Other requirements (a) compact circuit required (space is at premium, so no bulky components like transformers) (b) low heat generation and high efficiency output power (c) schematic in Kicad project or other editable with other opensource tools is preferred
Category: Product Design       

m****apu
 [?]
Sign in to view client's details.
| m****apu
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 2h, 11m ago  |  Ends: 1d, 21h  |   10 Proposals
We are moving into a 900 square foot open office and I would like to get a proper layout done. I will provide the current floor plan and measurements, and our requirements (we have software developers, plus customer support people, plus I need an office). All I need is the layout drawn up. I would like a few different concepts. Please let me know your price to do this project. We can go hourly (with a not to exceed) or fixed price. Thanks. Mike
Category: Interior Design       
Skills: Interior Design       

b****738
 [?]
Sign in to view client's details.
| b****738
|    Canada
Fixed Price: Not Sure   |  Posted: 4h, 8m ago  |  Ends: 6d, 19h  |   27 Proposals
I need a simple 3D model created that can be exported as a technical drawing and also in the right format to print using a 3D printer. I have attached the rough sketch. Please ask any questions and note that any proposals without an amount will be ignored. Thanks, Ben
Category: 3D Modelling       
Skills: 3D       

b****har
 [?]
Sign in to view client's details.
| b****har
|    United States
Fixed Price: Not Sure   |  Posted: Mar 30, 2015  |  Ends: 5d, 20h  |   17 Proposals
I am looking for a designer and draftsman who is familiar with residential new construction homes in the Midwest area, Minnesota based. The idea person would have: 1) Knowledge in the building industry and residential new construction. 2) A designer that can contribute ideas and floor plans when I run out of ideas 3) Be able to supply 2D and 3D models 4) Would prefer to have someone be able to assist with material take-off lists (based on the 2D/3D model created use that to calculate materials like siding, roofing, base board, case, flooring, etc...). 5) Supply cabinet layouts and elevations (not 20/20 views just general for the cabinet makers to know the space they are working in). 6) Work with tight homeowner deadlines and work with me on plan changes. 7) Proficient in English language, both spoken and written. Good communication skills and planning. 8) MUST BE ABLE TO SUPPLY CONSTRUCTION DRAWINGS to submit to the city for permits, however, in the state of MN they are no...
Category: Architecture       
Skills: 3D, 3D Modeling, Architecture, AutoCAD, 3D Design       
Preferred Location: United States

M****mes
 [?]
Sign in to view client's details.
| M****mes
|    United States
Fixed Price: Less than $500   |  Posted: Mar 29, 2015  |  Ends: 23h, 35m  |   12 Proposals
I have one bass bait (see attachment - mine will be similar to the top sweet beaver bait) that I need 3d laser scanned. Of course, I will have to send you some samples. Then, I need you to convert the scan into a 3d model and provide me either step or iges files. I plan to source job right away, but of course I will need to send you the bait samples to work with. This could also lead into having you do a mold design. Thanks - looking forward to reviewing your proposals. Brent Robbins Lunker Mania Baits, LLC Michigan - USA
Category: 3D Modelling       
Skills: 3D, 3D Scanning, 3D Design       

Y****haa
 [?]
Sign in to view client's details.
| Y****haa
|    United States
Fixed Price: Less than $500   |  Posted: Mar 27, 2015  |  Ends: 3d, 10h  |   17 Proposals
I have a 3D model designed in Rhino3D need to develop the same file in Revit to create Sections, elevations and site plan.
Category: Architecture       

s****_ma
 [?]
Sign in to view client's details.
| s****_ma
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: Mar 26, 2015  |  Ends: 1d, 22h  |   0 Proposals
Hi Elancers, Ik zoek z.s.m. een klusser die voor mij een aanhanger kan vernieuwen. De aanhanger is gemaakt van hout. Dit hout is toe aan vervanging en ik zoek iemand die dit voor mij zou kunnen doen. Er gaat maximaal 10 uurtjes in zitten. Specificaties aanhanger: Lengte: 365 CM Breedte: 194.5 CM Hoogte: 175 CM Nieuw materiaal: Betonplex of watervast berken multiplex
Category: Other - Engineering &...       
Preferred Location: Netherlands

a****sic
 [?]
Sign in to view client's details.
| a****sic
Fixed Price: Not Sure   |  Posted: Mar 26, 2015  |  Ends: 1d, 14h  |   2 Proposals
Hi I want to create a silicone product of a certain colour, however initial trials of the colour have features that we do not want. Im looking for someone who could offer advise about an appropriate pantone colour to use to get the result we want. should be a very quick job for someone who is an expert in the field. thanks!
Category: Other - Engineering &...       

m****ynz
 [?]
Sign in to view client's details.
| m****ynz
|    New Zealand
Fixed Price: Less than $500   |  Posted: Mar 25, 2015  |  Ends: 14h, 50m  |   44 Proposals
Hi I require a basic plan with finisher for a bank loan. Please see attached pictures. I would like it like the picture less the bits canceled. I would need room sizes and finishers. Thanks Sealan
Category: Architecture       
Skills: 3D Modeling, ArchiCAD, Architecture, AutoCAD, SketchUp       

K****aIS
 [?]
Sign in to view client's details.
| K****aIS
|    South Africa
Fixed Price: Less than $500   |  Posted: Mar 25, 2015  |  Ends: 13h, 28m  |   5 Proposals
Hi, I require a professional research proposal (3-4 pages), which includes viable and latest references (journal and conferences) in relation to: Stretchable / flexible Radio frequency IDs possible applications to such design. Aik
Category: Electrical       
Skills: Electrical Engineering, Electronics, RFID       

a****821
 [?]
Sign in to view client's details.
| a****821
|    Australia
Fixed Price: Not Sure   |  Posted: Mar 23, 2015  |  Ends: 6d, 23h  |   7 Proposals
Need a schematic and BOM for the wiring and components for a locator system device. The heart of the system will be a microcontroller similar to an Arduino Mega connected to a NFC Reader Shield, GSM Shield, having GPS, Wi-Fi and Bluetooth connectivity. The system will include a Lithium polymer battery, charging circuit using a mini USB port to plug in an AC charger. All components are to be generic off-the-shelf to keep cost down. It is preferable to use existing Circuit designs as much as possible to shorten the debugging process. Freelancer must be able to take care of the system design, including electronic and firmware. Electronic design includes schematics, BOM and PCB layout. Firmware design includes the implementation of all the logic functions and demo A general component layout, and functions and features requirements, will be provided as a guide. Freelancer must sign an NDA and be able to complete the job in 4 days, and be immediately available for any revisions requi...
Category: Other - Engineering &...       

S****o01
 [?]
Sign in to view client's details.
| S****o01
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-3 months  |  Posted: Mar 23, 2015  |  Ends: 6d, 22h  |   1 Proposal
We are looking for 3-4 game developers Your work will be mainly focused on a gameplay development with Unreal Engine 4 integration. Responsibilities: Building a game using Unreal Engine 4
Category: 3D Modelling       
Preferred Location: Ukraine

S****yuk
 [?]
Sign in to view client's details.
| S****yuk
|    Ukraine
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: Mar 23, 2015  |  Ends: 6d, 22h  |   1 Proposal
We would like to find an expert to help us build a neck pillow which is: - auto-expandable - comfortable and supportive - easy to store - light weight - suitable for age 6+ Please let us know if you are interested in this project and we can further discuss in details.
Category: Contract Manufacturing       
Skills: 3D Modeling, 3D Design       

H****osy
 [?]
Sign in to view client's details.
| H****osy
|    Hong Kong SAR, PRC
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 23, 2015  |  Ends: 6d, 20h  |   10 Proposals
Hello, as I want to measure 2 thermocouple temperatures via BLE, i'm looking for: A TI CC2540T with two Maxim-IC MAX31855 chips, serial protocal via BLE link, SPI from CC2540T to both MAX31855. The PCB should in the end be powered via LTC3588, but this is something for the next step of development. The application is in a vibrating environ- ment, where piezos should generate enough energy. Scope of work will be Firmware for CC2540T: - reading data from both MAX31855 via SPI - sending data via serial BLE link, when command sent via same link Hardware: - prototype BLE master (serial TTL connection for ATmel ÁC RX/TX) - prototype BLE slave with MAX31855 - schematic and board as files in Eagle format preferably The energy harvesting would be an add-on, to be quoted separately, but just when you feel comfortable enough to offer it. - LTC3588 included of the above mentioned slave board - 3.3V supply for BLE-TX every second only - piezo disks from beepers (brass-based type) a...
Category: Electrical       

c****866
 [?]
Sign in to view client's details.
| c****866
|    Germany
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 23, 2015  |  Ends: 6d, 20h  |   12 Proposals
I need a design patent filed and wish to have someone with experience help in the process. I have a basic drawing and need to guided and expand on the drawings. I hope to find someone with experience in design patents.
Category: Product Design       

C****ica
 [?]
Sign in to view client's details.
| C****ica
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 23, 2015  |  Ends: 6d, 20h  |   7 Proposals
Doucete is a natural skincare and haircare company based in Ireland. We are in the beginning stages of developing our products and, we are seeking an experienced R&D Chemist to help finalize new formulas for the line. The R&D Chemist will oversee product development from start to finish, including preservative selections, stability/compatibility testing and overall product quality to ensure they meet statutory guidelines.Comprehensive knowledge in natural skincare and ingredient trends and innovations is a definite must.
Category: Product Design       

D****ete
 [?]
Sign in to view client's details.
| D****ete
|    Ireland
Fixed Price: Not Sure   |  Posted: Mar 23, 2015  |  Ends: 6d, 20h  |   3 Proposals
I need to submit a patent and need a description and how the patent works created in technical speak.
Category: Mechanical       

C****ica
 [?]
Sign in to view client's details.
| C****ica
|    Canada
Hourly Rate: $10 - $25 / hr   |  Duration: 4-6 months  |  Posted: Mar 23, 2015  |  Ends: 6d, 20h  |   21 Proposals
I need someone to program various parts to be cut on a CNC plasma table - this will include nesting parts - all needs to be done in a timely manner with accuracy. All parts are 2D Need to have results ASAP
Category: CAD       
Skills: AutoCAD, 2D Design, CNC Programming       

s****ers
 [?]
Sign in to view client's details.
| s****ers
|    United States
Fixed Price: Less than $500   |  Posted: Mar 23, 2015  |  Ends: 6d, 19h  |   9 Proposals
We are trying to install small gas fired gensets at 5 separate commercial building. The gensets will work at peak time (80kva; 8.30am - 5.30pm); however, during off-peak and emergency periods (20-30kva; 5.30pm - 8.30pm), electricity supply will be provided by battery inverters, which would be charged by the gas gensets during peak periods. This solution means that the commercial building can be powered completely independent of the national grid; but will have the option to switch to it. The genset will come in pairs (2 x 50kVa) with alternator of 415v and a synchronising panel and will dispatch electricity at 415v. Please can you help depict the above scenario with: (a) an electrical drawing, (b) a block diagram and (c) architectural drawing of the genset area (including the gas cascades, PRS, gas gensets -- I will provide sketch)
Category: CAD       
Skills: 3D Modeling, AutoCAD, Electrical Engineering       

F****nka
 [?]
Sign in to view client's details.
| F****nka
|    United Kingdom
Fixed Price: $500 - $1,000   |  Posted: Mar 23, 2015  |  Ends: 6d, 19h  |   7 Proposals
For new prototype of educational toy for children need to print Circuit Board design/layout maybe 2layer PCB, Prototype of it and Soft ware development for prototype.
Category: Product Design       

r****dar
 [?]
Sign in to view client's details.
| r****dar
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job