Save this Search
     
Sort by:
  • Posted Date
Fixed Price: Less than $500   |  Posted: 40 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
We need three white papers developed, one for each market segment, that shows how to use a Solid State Relay in a typical application. The markets are as follows: 1. Aerospace/Defense 2. Medical Equipment (and diagnostics) 3. Transportation/Agricultural Equipment For each whitepaper, we need a problem to be stated (as in motor/heater control, etc...), a circuit design, simulated or tested, results and discussion of the results and comparison to other similiar designs. We are planning on using this for marketing and sending to engineers in these industries to help give them better ideas on how to use our products or give them a starting point or new ideas for the application of our products and/or technical knowledge.
Category: Other - Engineering &...       

s****yka
 [?]
Sign in to view client's details.
| s****yka
|    United States
Fixed Price: Less than $500   |  Posted: 54 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
I've got the hardware and board layout designed for a PIC30 Microcontroller for a Solid State Relay design and wanted to have a programmer add some intelligence in order to prevent false triggering in conducting the power to the load. This includes fault detection and filtering/decision making on weather the trigger input signal is truely a "on" signal or weather it was due to some sort of random noise (transients), a power system fault (loss of power/sagging power), random switching noise, a damaged/faulty component upstream, etc...
Category: Electrical       
Skills: C, C++, Adaptive Algorithms, Embedded System       

s****yka
 [?]
Sign in to view client's details.
| s****yka
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 3h, 40m ago  |  Ends: 14d, 20h  |   0 Proposals
I am looking to get some "patterned tights" created and I'm not sure how to go about doing that. I have the design for it. Anyone out there could help me with this?
Category: Other - Engineering &...       
Skills: screen printing, sewing       

C****Inc
 [?]
Sign in to view client's details.
| C****Inc
|    United States
Fixed Price: Not Sure   |  Posted: 5h, 32m ago  |  Ends: 14d, 18h  |   0 Proposals
hi, The job is writing a mini math project in mathematical modules in Geoscience. the subject is (aeolian dunes and ripples). It should be 10-15 pages and have +10 references. It should be structured as follow; Introduction, Mathematical Models, Analytic Results,Numerical Computations, Conclusions.
Category: Other - Engineering &...       
Skills: Scientific Computation, Mathematics       

F****yzO
 [?]
Sign in to view client's details.
| F****yzO
|    United Kingdom
Fixed Price: Less than $500   |  Posted: 5h, 38m ago  |  Ends: 2d, 18h  |   15 Proposals
I require a simple, professional 2D floor plan of my facility. I have attached a draft of (roughly) what I envisage the facility to look like: see 'Floor Plan.doc' To give you an idea of the specifications of each unit I have attached an image: 'Unit Dimensions.jpg'. These are the only dimensions I have but from these you should be able to estimate the required size of the remainder of the facility. - Store room and bathroom only really have to be 2m x 2m - Please add a front double door - Use colour if you wish - Please make any changes / additions you see fit - Let me know if you have any questions
Category: CAD       

B****oli
 [?]
Sign in to view client's details.
| B****oli
|    Australia
Fixed Price: Less than $500   |  Posted: 7h, 15m ago  |  Ends: 6d, 16h  |   15 Proposals
Attached PDF shows the floor plan for a three story home (first and second floor with a basement). I'd like a 3D rendering of this home so that I can view it in a program on my Mac called Live Interior 3D or SketchUp. The file would need to be fully editable by me. I'm looking to have the walls, floors, ceilings mapped. I have some photos of the interior and exterior of the home which I'd like the structure to match if possible. This would include kitchen and built in cabinets that are viewable from the pictures. I'm not looking to have furniture added as we'll use the open space to redesign what is there already.
Category: 3D Modelling       

w****aul
 [?]
Sign in to view client's details.
| w****aul
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 8h, 24m ago  |  Ends: 59d, 15h  |   1 Proposal
Prepare graphic shapes for CNC Router cutting. Shape files will be defined in popular graphic program formats such as Adobe Illustrator, Autocad, Corel Draw etc. The task is to import those files into a CNC CAD program called EnRoute and prepare EnRoute cut files for input to a CNC Router. Work can be preformed off site and files can be sent back and forth via the internet. EnRoute knowledge is required.
Category: CAD       
Skills: AutoCAD, CAM       

j****bwj
 [?]
Sign in to view client's details.
| j****bwj
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 8h, 28m ago  |  Ends: 14d, 15h  |   19 Proposals
We have a project that requires modeling and rendering of 20-25 bottles for website resolution display. Each bottle is unique and has been designed and has a 2D CAD file. The final images will be small (2-3" on screen) and might only need a front view with texturing and shading. Will need the finished files in PSD format. Can you provide a proposal for time and cost? Please let me know if you have any questions or need any other information. Thanks Bob Lanphear
Category: 3D Modelling       
Skills: 3D, 3D Modeling, 3D Rendering       

R****ear
 [?]
Sign in to view client's details.
| R****ear
|    United States
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: 9h, 39m ago  |  Ends: 6d, 14h  |   16 Proposals
I am looking to hire an individual freelancer who will design a series of low cost key working homes/apartments clustered together. Space is at a premium and these are designed for low paid workers to reside near their place of work, but providing all that they need. The design is primarily for singles and would incorporate a community cluster feel, common areas and space to meet and mix. Key element is to permit vehicle parking underneath these structures, so a raised platform is required. Environmental "green" designed is also a key design element. The whole project is to provide low cost housing but making people feel they want to live there whilst they are able to save for more ambitious living accommodation. Simple and functional but able to be turned into a home would be a fair description. Update: Please forgive the lack of response to those who took the time to submit their interest. Due to a family bereavement, this project has had to be set aside for the last coupl...
Category: Architecture       

p****961
 [?]
Sign in to view client's details.
| p****961
|    United Kingdom
Fixed Price: Not Sure   |  Posted: 10h, 33m ago  |  Ends: 14d, 13h  |   10 Proposals
Let's face it, most WiFi Access Points end up exactly where they belong, in a closet. Because, except for perhaps the Apple AirPort Extreme, they are butt-ugly! At least, that's what I think. Having said that, I don't like Apple's design. Or, I do not want to copy their style. I do respect the fact that at least they do DESIGN things and often put form before function. I also respect the "minimalistic" and "Bauhaus" design concepts. Before getting into what the purpose of the WiFi Access Point (ie. the features) is going to be, please allow me to try and share "my style" (if there is such a thing): - Clean (for example; No visible wires ever. Not even inside the device). - Subdued brushed-metal gray (Think HTC One). On top of this - and i can imagine this is hard to follow - the purpose of the design should be to convey my passion for the specific technology (used by the device) without making it geeky or nerdy. As an example: If I had a car (let's say...
Category: Product Design       

E****ard
 [?]
Sign in to view client's details.
| E****ard
|    Netherlands
Fixed Price: Less than $500   |  Posted: 11h, 28m ago  |  Ends: 1d, 12h  |   8 Proposals
Enerwhere is a developer of off-grid commercial-/industrial scale solar-diesel hybrid plants in Middle East and Africa. One of Enerwhere's key innovations is a proprietary modular, transportable solar PV generator that allows rapid deployment of solar energy anywhere. We have designed a transportable and seasonally tiltable ground mounting structure that is currently installed in our pilot plant. Our objectives are: - to check the structural integrity of our prototype - to optimize the weight of the structure
Category: Civil & Structural       

E****ere
 [?]
Sign in to view client's details.
| E****ere
|    United Arab Emirates
Fixed Price: Less than $500   |  Posted: 13h, 50m ago  |  Ends: 1d, 10h  |   17 Proposals
I have 2 different sunshades which require all the parts and sub-assemblies drawn in Inventor 2013. (you will probably not be able to open the files if you have older version) YOU MUST HAVE EXPERIENCE OF PRODUCING PRODUCTION DRAWINGS AND KNOW HOW TO SUITABLE ANNOTATE AND DIMENSION THEM!!!!!! I will want all the drawings in Inventor .idw format, and also in correct scale PDF. You will need to send PDFs for review and markup before sending in inventor format for which I will supply the template. For each part you will probably have to update the iProperties as per the table in the attached drawing. What I want is 2 folders, with a sub-folders for the PDF drawings, DXF files for CNC cut plate and a single Inventor drawings in each folder for each of the 2 shelters. I have these assemblies all modeled ready to do, you might need to add some welds but that's it, I can send you these drawings to start from. Thanks, Simon
Category: CAD       
Skills: Autodesk Inventor       

d****r3d
 [?]
Sign in to view client's details.
| d****r3d
|    United Arab Emirates
Fixed Price: Not Sure   |  Posted: 15h, 29m ago  |  Ends: 6d, 8h  |   5 Proposals
I have an original clock that i would like to replicate. The inside timing is controlled via a receiver signal (see picture attached). I have the diagrams and everything. It is in german and if need be i can have it translated. Your job would be to replicate the inside workings of the clock. The outside design will be different. How do I contact you to discuss the job Ein Uhrr mit Funk möchtee ich nachbauenn. Anleitung ist dabei. Wir möchten ein Prototyp bauen (also innerlich das gleiche aber anderer Design) Ich werde es Ihnen eventuell schicken. Wie kann ich Ihnen Tagsüber am besten erreichen?
Category: Electrical       
Preferred Location: Western Europe, Eastern Europe

m****ons
 [?]
Sign in to view client's details.
| m****ons
|    United States
Fixed Price: Less than $500   |  Posted: 18h, 18m ago  |  Ends: 14d, 5h  |   32 Proposals
I have a meteor CNC machine from probotix. I'm having trouble doing basic CAD. I need 4 simple 3D cad drawings made so that I can make longboard (skateboard) designs out of foam. I will show you the designs and dimensions I need. For an experienced CAD person this job will be super quick. Files must be compatible with the probotix machine. I currently use Cubify design (not well, that's why this job is posted), I have MeshCam v5, and cutviewer mill. If we work well together I will need adjustments made to these designs I the future, so some ongoing work is a possibility. I've included some ideas with the enclosed attachments.
Category: CAD       

g****one
 [?]
Sign in to view client's details.
| g****one
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: 7-9 months  |  Posted: 20h, 16m ago  |  Ends: 89d, 3h  |   3 Proposals
Engineer for TBLDevelopmentfirm.com Engineer for TBLDevelopmentfirm.com Engineer for TBLDevelopmentfirm.com Engineer for TBLDevelopmentfirm.com Engineer for TBLDevelopmentfirm.com Engineer for TBLDevelopmentfirm.com
Category: Mechanical       
Skills: 3D       

N****per
 [?]
Sign in to view client's details.
| N****per
|    United States
Fixed Price: Less than $500   |  Posted: 21h, 23m ago  |  Ends: 14d, 2h  |   12 Proposals
I am looking for someone to mock up a desktop fan that would be USB powered. I don't have very specific needs other than I would like it to look sleek, and high quality, like an Apple product, and not simply a mock up of an already existing product. I would like one final Render of the fan, which I can supply a logo to put on. Also one picture of the fan as a wireframe.
Category: 3D Modelling       

m****kem
 [?]
Sign in to view client's details.
| m****kem
|    United States
Fixed Price: Less than $500   |  Posted: 21h, 51m ago  |  Ends: 29d, 2h  |   9 Proposals
For this job our company is looking to build a trusting relationship with a business professional who is in close proximity to Bao'an, Shenzhen, China, 518126. We are working with a LED Lighting manufacturer who is based out of that area and we are looking for someone someone who can assist us by visiting the factory, inspecting the facilities, communicating in person with the factory representatives on our behalf, conduct pricing negotiations and perhaps assisting up with shipping arrangements. We will be working with various LED Lighting Manufacturers based out of China and ultimately we are looking to put together a team to help work with those manufacturers in order to facilitate large volumes of product sales to our Lighting Specialist, Electrical Contractor and General Contractor customers.
Category: Other - Engineering &...       

D****hew
 [?]
Sign in to view client's details.
| D****hew *
|    United States
Fixed Price: Not Sure   |  Posted: 21h, 53m ago  |  Ends: 14d, 2h  |   8 Proposals
Want to have the bar risers and clamps machined from pages 1,2, and 4 of the attached pdf. Your bid must be a final bid..meaning you need to figure the cost of materials, labor, machine time, and shipping. I want a final value only, that way I am comparing bids as "apples for apples." Please provide a price for 5 sets of clamps with the "one-piece" bar clamp top mount (page 1-2), and 5 sets of clamps with the two piece style bar clamps (page 4). Thank you
Category: Contract Manufacturing       

S****vel
 [?]
Sign in to view client's details.
| S****vel
|    United States
Fixed Price: $300 - $500   |  Posted: Apr 15, 2014  |  Ends: 13d, 23h  |   2 Proposals
You are a wizard, an inventor, a tech savvy visionary who understands Mobile and GPS technology.... if this is you, ad signing an NDA is within your comfort zone, let's talk. Thank you.
Category: Product Design       

C****age
 [?]
Sign in to view client's details.
| C****age
|    United States
Fixed Price: $25,000 - $50,000   |  Posted: Apr 15, 2014  |  Ends: 13d, 22h  |   17 Proposals
Our company is engineering a product for the consumer public. The device takes in information from sensory probes, converts the analog to digital then imputs to a software plateform. The platform must be server based as hundreds of smartphones will be accessing it. The application designed must be at a consumer level. Easy to use and simplistic, but beautiful. The budget for engineering, prototyping, and completion of total system is set at 50k All hardware and software must be developed for this amount. This product must be perfect. Our company will not settle for anything less.
Category: Other - Engineering &...       

t****mur
 [?]
Sign in to view client's details.
| t****mur
|    United States
Fixed Price: $40 - $100   |  Posted: Apr 15, 2014  |  Ends: 13d, 22h  |   24 Proposals
Hello there.. the bike i want to copy is the eliptigo you can get images from their website . i would like to have all measurement and angles for that frame so it can be built from scratch. i only need the frame ... the green area . final file a 1/1 scale to be plottted in A0 or A1 the idea is use the blueprint at the work bench make only the necessary view
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks, 3D Design       

m****gon
 [?]
Sign in to view client's details.
| m****gon
|    United States
Fixed Price: Not Sure   |  Posted: Apr 15, 2014  |  Ends: 13d, 22h  |   6 Proposals
I need a breadboard circuit with the final schematic and the right values and BOM. We need an AM detector which has 120kHz at 2Vpp and is modulated with 32kHz, 10mV. The demodulation sub-circuit has a diode and an RC which has to match. Due to small Signal to Carrier ratio, we will get a huge ripple which needs to be filtered out. The 32kHz comes with 8 periods per bit and has to create an output level of 100mV.
Category: Electrical       

l****deh
 [?]
Sign in to view client's details.
| l****deh
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: Apr 15, 2014  |  Ends: 13d, 21h  |   4 Proposals
Assignment The Chief Executive Officer of a major construction company has commission you as an external consultancy to provide a report on the changing role of project managers. The report will be used to guide: the company's procurement strategy; and its approach to project management and the training of its project managers. You need to describe the context of the company under consideration but you may base you answer on a real company of your choice. Discuss how the changes that have taken place in recent years and those that likely to place in the near future will impact on the Role of Project Manager for Major Construction Projects. write 1500 words about just the about Effect of technological advances.
Category: Civil & Structural       

s****gon
 [?]
Sign in to view client's details.
| s****gon *
|    United Kingdom
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job