Upwork home
Sign up
Secondary

Hire the best Electronic Engineers

Check out Electronic Engineers with the skills you need for your next job.
Hire freelancers
Clients rate Electronic Engineers
Rating is 4.7 out of 5.
4.7/5
based on 1,608 client reviews
  • $125 hourly

    • 4.9/5
    • (49 jobs)
    I’m Kevin. I design things. Over the last ten years I have taken over twenty commercial products from concept to manufacture while navigating startup challenges along the way. I am “practical” above all else. A team player and easy to communicate with, I am able to take rough concepts and deliver them as working products or prototypes with minimal cost and hassle. My specialty is electronic hardware design, though most projects involve physical or mechanical parts as well. This is my full time job, working from my dedicated workshop near Portland, Oregon. I have in-house capability for most aspects of bringing up new designs and fabricating one-off devices or prototypes. We have high resolution SLA 3D printing (UV resin), a large 4x8’ production CNC machine suitable for plastics and most aluminum, and plenty of bench/floor space for your project. I have relationships with various local machine shops and test labs, so extra support is convenient if needed. I work in Altium Designer for schematic and PCB board layout, and use Solidworks or Autodesk Fusion for physical component design and working with complex physical assemblies. I have designed many injection molded parts, stamped metal parts, etc. Many of my products involve radio so I’m familiar with the FCC test lab process for both module based radios and custom designs. I have designed Internet of Things IoT products, wireless mesh networking, and low cost proprietary point to point radios. I am intermediate level coding on small 8 to 32 bit microprocessors in C,C++. My code is extremely "human readable" and cleanly documented. I have solid experience with Mircochip PIC processors, Atmel, STM32, and MSP430. I have written several low level handlers for custom board hardware and protocols. If you’re looking for a competent person that is easy and reliable to work with, and who will handle your project as if it were their own, let’s chat and see what happens. Electronics: -Embedded Hardware Design -PCB Circuit Board Design -Low-level Microprocessor Coding, C, C++, Python -Radio Wireless Communications and Certification -Internet of Things, IoT, Mesh Networking, Zigbee -Robotics -Automation -Short Run PCB Assembly -Prototyping and Test Fixtures (in house) -Reverse Engineering, Proprietary Protocols -Testing, Debugging, Product Validation Mechanical: -Solidworks -Autodesk Inventor / Fusion360 -Complex Assembly Design -Process, Testing, and Assembly Fixtures -Injection Molding -High Resolution SLA 3D Printing (in house) -CNC Machining (in house) -Industrial Processing Fixtures -Plastics Fabrication (Tanks, Jigs, Wet Processing, etc.) -Rapid Prototypes and 3D Printing for Industrial Parts -Moving Parts, Gearing, Bearings, etc. Support Services: -Connections with Contract Manufacturers -Crowdfunding, I've raised approx $400k via Kickstarter, Indiegogo -Relationships with Asian and China Manufacturers -Injection Molding & Stamped Metal Parts from Asia -Patent Experience (I hold 7 Patents)
    vsuc_fltilesrefresh_TrophyIcon Electronic Engineer
    Firmware
    Arduino Firmware
    Circuit Design
    PCB Design
    RF Design
    Injection Mold
    Electrical Engineering
    Electronic Design
    Product Design
    Hardware Prototyping
    SolidWorks
    3D Printing
    Product Development
    Mechanical Design
  • $90 hourly

    • 5.0/5
    • (16 jobs)
    The services that I offer are circuit design, PCB Design, PCB design review /consulting for cost optimization, circuit board prototyping, embedded design, Arduino and firmware development in C/C++, and power electronic design. I have 8 years of experience in embedded design, circuit design, and PCB design. I'm highly experienced in cost optimizing PCB designs for manufacturing due to experience working at a circuit board assembly manufacturer. I've done a lot of analog circuit design for audio and power supply circuits. I have designed a wide variety of switch mode power supply topologies at power levels from 1W to 300kW. I have extensive experience in PCB design specifically for power electronics to minimize parasitics and maximize efficiency. Most of my experience with microcontrollers is with AVR and Atmel/Microchip ARM using the Microchip Studio ( Previously called Atmel Studio) . I also have a lot of experience with Arduino and embedded design with microcontrollers that are supported by Arduino. The software that I'm fluent with are, Atmel studio, Altium Designer, Circuit Studio, Diptrace, Multisim, Ultiboard, Viewmate, LT Spice, Tina, and Solidworks.
    vsuc_fltilesrefresh_TrophyIcon Electronic Engineer
    Multilayer PCB
    PCB Design
    Altium Designer
    Electrical Engineering
    Circuit Design
    Power Electronics
    Music & Sound Design
    Embedded Application
    Electronic Design
    C++
    User Interface Design
    Arduino
  • $100 hourly

    • 5.0/5
    • (41 jobs)
    🌟 About Me: Hello! I am a multifaceted technology consultant and project leader. Renowned for transforming innovative ideas into market-ready products, my journey from a self-taught programmer to an expert in multiple tech domains equips me to lead and manage diverse projects with unparalleled efficiency. 🔍 Core Competencies & Services: 1. Strategic Consulting & Market Viability Analysis: - Expert in assessing ideas for market feasibility. - Conducting in-depth market research to inform product strategies. 2. Expertise in Cloud Computing & DevOps: - Proficient in cloud services, computing, and creating scalable, secure architectures. - Skilled in DevOps practices and comprehensive server management. 3. Leadership in Multidisciplinary Teams: - Exceptional ability to lead diverse teams across various technology aspects. - Fostering collaboration and aligning efforts with project goals. 4. Advanced Technical Skill Set: - Programming (Python, C, C++, Dart,R): AI algorithms, technical problem-solving. - Product Development & Rapid Prototyping: From ideation to manufacturing. 5. Innovative Product Development: - Electronics & PCB Design: Custom designs for AI, IoT, and more. - Mobile Development (Dart & Flutter): User-friendly applications and interfaces. - CAD/CAM (Fusion 360): Precision designing and prototyping. 6. Full-Stack Development & IoT Solutions: - Robust web solutions and innovative IoT devices for various applications. 💡 My Approach: With a blend of technical expertise, strategic insight, and effective team management, I'm well-equipped to bring visions to fruition. My extensive experience in cloud computing, DevOps, and server management, combined with my ability to oversee multidisciplinary projects, ensures the delivery of top-notch, market-aligned solutions. 🤝 Let's Collaborate: Ready to achieve excellence in your next project? Let's collaborate to make it happen!
    vsuc_fltilesrefresh_TrophyIcon Electronic Engineer
    Embedded Linux
    Microcontroller Programming
    Android
    Rapid Prototyping
    Prototyping
    3D Printing
    Microcontroller
    Raspberry Pi
    Arduino
    PCB Design
    Electronics
    CAD
    Machine Learning
    Python
  • $100 hourly

    • 5.0/5
    • (19 jobs)
    I am a Telecommunications Engineer with strong background in Embedded Systems. I have designed multiple products for use in ATEX / IECEX environments and developed software to meet IEC 61508 standard.
    vsuc_fltilesrefresh_TrophyIcon Electronic Engineer
    Electronics
    Compliance Consultation
    Electrical Engineering
    Circuit Design
    PCB Design
    C
    Embedded System
    Embedded C
  • $50 hourly

    • 5.0/5
    • (37 jobs)
    I have been working for more than 6 Years in the field of PCB designing. I take your idea and transform it into a functioning circuit, delivering design files, prototype PCBs, and detailed BOM.VHDL,Python C,C++, PCB. I have extensive experience in areas including PCB design, Embedded System, Analog and Digital Circuit Design, Circuit Simulation, OpenCV, Computer vision, 3D scanning, Artificial Intelligence, ImGUI, Linux, RPi, Arduino, etc.
    vsuc_fltilesrefresh_TrophyIcon Electronic Engineer
    Firmware Programming
    Computer Vision
    Hardware Prototyping
    Microcontroller Programming
    PCB Design
    C++
    Embedded Linux
    Arduino
    ESP32
    STM32
    Altium Designer
    Embedded C
  • $100 hourly

    • 5.0/5
    • (21 jobs)
    PCB Design (DC/DC power supplies, LED Drivers, Microcontrollers, PFC circuits, Laser Drivers, Motor Drivers, Line voltage systems) Well versed in Altium Designer and KiCAD Experience debugging PCBs and electrical systems including finding and making changes to bring products into compliance with EMC certification standards Python data collection/analysis experience (e.g. designed and wrote a python script to collect, analyze, and visualize position sensor data in a laser pointing system that led to the discovery of EMI induced jitter) Solidwork/Onshape mechanical CAD experience, wire routing, wire harness design
    vsuc_fltilesrefresh_TrophyIcon Electronic Engineer
    Python
    Amplifiers & Filters
    PCB Design
    Embedded System
    Circuit Design
    KiCad
    Arduino
    Altium Designer
    3D Modeling
  • $80 hourly

    • 4.8/5
    • (100 jobs)
    18+ years of experience in electronic design. 100+ major design projects delivered. 200+ happy clients served. Whatever your electronic design needs are, reach out for a quick chat, you will not regret it! What to expect: ✅Top quality design that not only meets and exceeds your requirements but can also handle those unexpected conditions that make quality products stand out from the rest. ✅Rigorous design test and measurement that leaves nothing unchecked, keeping in mind not only your interests but also those of your end customers. ✅A design that is optimized and ready for manufacturing with parts readily available. ✅Exhaustive documentation and support so you can make best use of all deliverables. ✅A flexible service that can take care of all phases in the design and prototyping process or just those parts that you prefer. ✅Long-term availability for changes, revisions, and support. ✅Above all, an honest and friendly collaboration that you can trust. I invite you to reach out to discuss your project's unique needs. Regardless of your technical background, I am here to transform your product idea into a tangible reality, employing the most efficient and cutting-edge technology. My services extend beyond design, offering assistance in defining complete project requirements, recommending suitable technology, and guiding your product to production. I can also connect you with reliable suppliers and provide unwavering technical support throughout the entire process. As a full-time freelance engineer, having worked with clients from all over the world in very diverse applications, I’ve been able to gain a broad experience in electronic design. The designs I’ve produced over the years range from the simplest of designs to very complex high-density designs at the cutting edge of technology. I have gained experience with a variety of microcontrollers, processors, sensors, interfaces, protocols, and design architectures. I’ve also been able to utilize a variety to PCB technologies ranging from multilayer rigid, HDI, flexible, rigid-flex, metal-core, as well as exotic materials such as stretchable PCB. Throughout the years I’ve also invested significantly in a spacious lab and equipment for both prototyping (including pick-and-place, reflow oven and advanced JBC soldering equipment) as well as professional test and measurement equipment (including oscilloscopes, spectrum analyzers, VNA, bench meters, electronic loads, waveform generators, ECG simulator, thermographic imaging, and data loggers), all from reputable brands (Keysight, Teledyne-Lecroy, FLIR, Fluke, Tektronix, Pico,…). My vision is to produce top quality designs with a ‘whatever it takes’ attitude and am willing to invest effort and financially in ensuring that I am well equipped to do so. Some of the specific experiences include: Software tools: Altium Designer (my primary EDA), KiCad, Eagle, Proteus; SolidWorks; Ansys, Keysight-ADS, COMSOL; VS Code, Visual Studio, PyCharm, IntelliJ; Keil MDK Arm, GCC, IAR, CodeComposer, Microchip Studio; Quartus Prime, Xilinx ISE; Programming languages: Embedded C, C++, C#, Python, Rust, Java, VHDL, Bash scripts, PHP, javascript… Microcontrollers/SoC: STM32 (often preferred), ATSAM, STM8, nRF5x (often preferred for BLE applications), EPS32, CH32 (RISCV), C2000, CC2642, CC13xx, PIC16/18, AVR, MPS430, RP2040, i.MX, A20/50, RK35xx, MAX78000, … Protocols/Buses: RS485/422, USB, UART, SPI, I2C, CAN, LVDS, DDR; Modbus, NMEA2000, MQTT, … Common design features: - BLE / Wi-Fi with custom PCB trace antenna, fully simulated and tuned on prototypes. - USB charge circuit for Li-Ion battery, including fast charging. - Battery protection circuits and cell balancing. - PoE source/device/injector designs with necessary protocol handshakes. - ARM embedded processor design running embedded Linux system. - RTD measurement circuits, 3/4 wire, 24 bit, PGA and filtering. - ECG, EOG, EEG monitoring wearable designs. - IMU motion tracking with sensor fusion and quaternion streaming. - GNSS location tracking, including high precision RTK modes. - Audio capture, filtering, processing, and amplification. - DC/DC converters in various topologies including buck, boost, buck-boost, SEPIC, CUK, H-Bridge, cascaded, multi-phase. AC/DC converters (flyback, feed-forward, …). DC/AC inverters, BLDC control… - LED driving with attention to color rendering and thermal management. - Solar MPPT controller. - UHF long range wireless designs, LoRa, Sigfox. Cellular interfaces 4G, LTE, NBIoT, LTEM. My commitment to excellence, innovation, and collaboration has been the cornerstone of my career. I look forward to the opportunity to bring your vision to life, leveraging my extensive skill set and passion for electronic design. Feel free to contact me to embark on a successful journey together.
    vsuc_fltilesrefresh_TrophyIcon Electronic Engineer
    Electronic Design
    Embedded System
    Circuit Design
    Digital Electronics
    Analog Electronics
    Hardware Prototyping
    Electrical Engineering
    Firmware
    Embedded C
    Embedded Linux
    Hardware Design
    Altium Designer
    PCB Design
    Internet of Things Solutions Design
  • $60 hourly

    • 4.7/5
    • (88 jobs)
    10+ years of freelance product & project management for PCB design and layout, firmware programming, and rapid prototyping. Here is a non-exhaustive list of relevant software/protocols/chipsets: - Strong C++, C, and C# - PCB layout and schematic capture with Altium, Cadence, Eagle, etc., with multilayer, flexible, high-speed embedded systems - FPGA programming with Verilog/VHDL: Altera Quartus, Xilinx, iCECube - Experience with low-cost MCU/single-board prototyping platforms: Arduino, Beaglebone, Raspberry Pi, NanoPi, etc. - ARM: ATSAM, STM32, PIC32, A13, FreeScale, MSP, NXP - MPU: Pic33F/18F/16F, Atmega 80251, 8052, 8951, 8051, 16, 32, 128 - Digital interfaces and wireless transmission: UART, I2C, SPI, BLE, BT, GSM/GPRS/GPS, xBee, ZigBee (particular experience with BLE HM10, HC05, ESP32, DA14508, nRF52832, 52840, BlueNRG) I also have a background in mechanical engineering and industrial design; I can implement my work into fully realized products for you. Expect me to help your business as if I am growing my own.
    vsuc_fltilesrefresh_TrophyIcon Electronic Engineer
    Microcontroller Programming
    ESP32
    Core Bluetooth
    Power Electronics
    Computer Hardware Design
    Firmware
    PCB Design
    Wireless Communication
    LED Physics
    Electronic Circuit Design
    Rapid Prototyping
    Altium Designer
  • $120 hourly

    • 4.9/5
    • (117 jobs)
    Physicist specialised in Electromagnetism and Electronics, working like RF&MW engineer from 1989, designing, developing and manufacturing High Frequency devices and products. With a large industrial experience. My main skills are the antenna design, amplifiers, filters, mixers and complex RF systems. Experienced user of simulation tools like ADS, AWR, LTSpice, PSPICE, EM simulators like HPMomentum, FEM, Axiem, CST, HFSS and COMSOL Multiphysics, and PCB design tools like Altium, Eagle, OrCAD, Design Spark, etc.. Equipped with a complete laboratory for prototyping, manufacturing, testing and checking. Services I offer: - RF&MW and industrial consultancy. - Design and development of Electronics products. - Fast Prototyping and Testing. - Technical Reports and Feasibility Studies. - Asistance and support in papers, thesis, essays and scientific publications.
    vsuc_fltilesrefresh_TrophyIcon Electronic Engineer
    Antenna Testing
    PCB Design
    Electrical Layout Design
    RF Microwave Design
    RF Design
    Digital Electronics
    Amplifiers & Filters
    Circuit Design
    Analog Electronics
    Antenna Design
    3D Modeling
    Hardware Prototyping
    Physics
    Engineering Simulation
  • $110 hourly

    • 5.0/5
    • (71 jobs)
    I’m a native English speaker. I’ve been working with electronics and developing products for over 25 years. Much of my electronics experience came from working at Microchip (in many different engineering roles). I’ve also developed my own successful products. For the past three years, I’ve been helping others develop their products on upwork. I’m going to help you make a working product, and I’m going to make improvements through the process! I don’t make the above claim lightly. It’s been my experience on every upwork project I’ve had. I work well with others, and can help motivate teams. Through all the product development I’ve done, I’ve created a system for planning and designing working products. This system reduces costs (by reducing mistakes). I frequently make product improvements in: (1) lowering energy usage: important in battery-powered products. (2) increasing performance: increasing sample rates or changing communications protocols. (3) making full use of the microcontroller peripherals to reduce external components. I have experience with many leading-edge technologies, such as: USB/USB-C, Lithium battery charging, LED’s and color mixing, I2S digital audio, analog measurements. I’ve worked with all the common communication busses: USB, RS-232, RS-485, CAN, I2C, SPI, Infrared (with carrier). Work experience Microchip was my first employer after graduating from Arizona State University. I’ve worked at Microchip as a: Test engineer - developing comprehensive test programs to ensure that the chips are free of defects and working as they should. The test programs were all written in assembly. Design engineer - Designing the processor and peripherals. Through this experience, I have a deep knowledge of how processors work (interrupts, clocking, power consumption, and interfacing with peripherals). All validation code was written in assembly language. Silicon validation engineer - Verifying that the first samples of a new product meet the design specification. This was typically assembly language, but sometimes ‘C’ Applications engineer - writing ‘C’ code to help other engineers make use of new features, such as RGB color mixing, IR remote controls, motion sensing, and wireless communication. I’ve worked as an independent developer, developing my own successful products in the areas of computer security and energy-saving pool products. I’ve been working for over 3 years on upwork as an independent developer. I enjoy taking people’s ideas and performance requirements and turning that into a working system. I begin with a block diagram, then schematic, then layout. I also organize the project so that it will be easy to switch to production. I’ve completed over 60 jobs on upwork successfully, and have many great working relationships with my clients. It’s too much to list here, but you are welcome to explore my work history. If you’ve gotten this far in the document, you can see that I’ve been working with electronics (primarily microcontrollers) for the past 25 years. I can do both the hardware and software development. I can also break up the project where I do what services you need. For example, I could do the architecture and hardware design, and you could have someone else do the software. I like to be flexible with my clients and deliver the most value where I can. Building first prototypes I have a small home laboratory where I have all the tools I need to develop/debug prototype boards for your product. This includes: Multiple programmers for Microchip, Atmel, and TI parts. Logic analyzers to quickly find issues with communication busses such as I2C, SPI, UART, I2S, …. A “power profiler” with picoAmp range (yes, picoAmp, a trillionth of an Ampere) for power optimization of low-power products. A reflow oven for assembling prototype PCB’s. Inspection equipment for verifying PCB assembly. A fellow upwork contractor is available to do the physical assembly work. She works at a much lower rate than me, and has the patience to hand-populate/hand-solder prototype boards. Some electronic inventory is on-hand. We may have all the components in-house to complete your project. Intellectual property protection I’m a professional engineer, and I respect your intellectual property rights. I want to help you protect the intellectual property rights for your product, and also help prevent others from stealing the idea. I mentioned ‘trust’ up above, and this is an area where I can earn your trust by helping protect your product. This could be through patents, trademarks, protected code, …. This is one of the ways that I offer additional value to my clients. If you’re developing a product, I invite you to have an audio call with me (through zoom on upwork). The first call is free, and we can see if I can help you reach your goals in some way.
    vsuc_fltilesrefresh_TrophyIcon Electronic Engineer
    Microcontroller Programming
    Software Architecture & Design
    MSP430
    Microcontroller Design
    Embedded System
    PCB Design
    USB Electronics
    Hardware Prototyping
    PIC16
    Circuit Design
    C
    Assembly Language
    Electrical Engineering
  • $300 hourly

    • 4.9/5
    • (151 jobs)
    Versatile engineer focused on electronics and product design, with strong emphasis on high-complexity printed circuit board designs with a focus on design for manufacturability. I design, build, program, and test prototypes with in-house tools. I have served a wide variety of industries and have developed initial concepts and prototype devices as well as producing products that go into full scale production manufacturing. Extensive design experience on Altium Designer, including detailed layout incorporating 3D CAD models. Certified IPC Designer Council PCB Designer (CID). Whether it's taking an existing Arduino / Raspberry Pi prototype and turning it into a manufacturable product, or developing a brand new product from the early concept stage, I enjoy providing you with technical solutions that are suitably engineered for your needs. I am a graduate of the California Institute of Technology (Caltech), with a B.S. in Engineering and Applied Sciences. I am located in the Pasadena / Los Angeles-area. I am a U.S. Citizen and am available for travel domestically and internationally. Key offerings: • System analysis and design, including key technical and market considerations for success • Electronics design and printed circuit board (PCB) layout with Altium Designer • Mechanical CAD work to supplement the electronics, including sheet metal work • Develop bare-metal firmware and embedded-OS software • Build and test prototypes • Manage regulatory testing • Manage product manufacturing and logistics • Troubleshoot and fix failed devices and bad designs. • Assemble / repair prototype devices. I can use many formats of customer-supplied data from other electronics design software, and mechanical data from Solidworks and other standard CAD data formats. I have developed a wide variety of circuit boards, including: • Industry standard 4- and 2-layer boards with surface mount and through-hole components • Higher-complexity board (very high layer count, blind/buried vias, HDI) • High-speed / high-density boards with length-matching and tuning • Circuit boards with complex mechanical dimensional requirements • Flex and rigid-flex circuits with features on multiple work planes. • Products incorporating Bluetooth, BLE, WiFi, and serial interfaces (SPI, I2C, LIN, RS-232, RS-485) I design, assemble and test prototype electronics with in-house equipment. For volume production, I can arrange turn-key manufacturing for you. Partial list of equipment: • Prototype SMD assembly and rework tools • Othermill CNC PCB milling system • SMD Pick-and-place for short-run PCB assembly (over 3,000 CPH) • 3-axis CNC mill for enclosure / custom metal fabrication • Multiple 3D Printers • 4-Channel 500 MHz DSO, 500 Msps logic analyzer • Thermal imaging camera Please feel free to challenge me with your tough projects!
    vsuc_fltilesrefresh_TrophyIcon Electronic Engineer
    PCB Design
    Embedded System
    Prototype Design
    Compliance Testing
    Multilayer PCB
    Altium Designer
    Mechanical Design
    Digital Electronics
    Product Development
    Firmware
    Engineering Design
    Hardware Prototyping
    Electrical Engineering
  • $85 hourly

    • 4.9/5
    • (30 jobs)
    Over 10 years working experience as an automotive electronics engineer in Japan and the U.K. Hardware design and embedded firmware design for vehicle electronic control units (ECUs). Various function/hardware development include DC motor control and battery management systems, as well as research and development of more complex ADAS driver assistance systems. UDS / OBD vehicle diagnostics development on the CAN bus. While my background is mainly automotive product related, I have experience in consumer product development, specifically in digital and analog hardware design, wireless(BLE), sensor implementation (A/D, light, motion e.t.c) and software/firmware/model development (C,C++,C#, Matlab Simulink and others). I also have experience with bootloader and OTA update development for various microcontrollers.
    vsuc_fltilesrefresh_TrophyIcon Electronic Engineer
    Simulation Game
    Machine Learning
    Circuit Design
    Firmware Programming
    PCB Design
    Hardware Design
    C
    MATLAB
    Digital Electronics
    Eagle
    Automotive Engineering
    Electronic Design
  • $60 hourly

    • 5.0/5
    • (54 jobs)
    Hello, everybody. I'm provide complex electronic solution. From idea to mass production. I'm providing electronic circuit design, PCB design, embedded coding I'm providing prototype assembling and testing I'm providing cost estimate for mass production and manufacturing consulting service Please, feel free to contact.
    vsuc_fltilesrefresh_TrophyIcon Electronic Engineer
    3D Modeling
    Embedded System
    Electronic Design
    Eagle
    STM32
    Hardware Design
    ESP32
    PCB Design
    Altium Designer
    Robotics
    Arduino
  • $122 hourly

    • 5.0/5
    • (29 jobs)
    Based in Portland Oregon USA, I am a senior level electronic engineer with over 25 years experience in the design of circuitry incorporating various microprocessors / DSPs, and development of embedded C / C++ firmware. As a full-time freelancer, I specialize in creating intelligent control electronics through the use of wired and wireless sensors. I have a Master of Science degree in Electrical Engineering with a digital signal processing concentration. I can assist clients in any of the following areas: - Digital and analog electronic circuit schematic design, PCB design, test, debug, and integration - Electronic prototyping and preparation for product commercialization - Embedded processor firmware design (drivers, application, and DSP algorithms), development, debug, and integration - Initial project framework (specification writing, structuring, and system design). Projects I regularly help clients with: - Hand held and remote meters - OBD vehicle electronics - Wired and wireless sensors - High performance audio capture / processing / reproduction and audio CODEC - Medical wearable devices - Low power battery driven electronics - IoT device to server electronics and firmware (MQTT, HTTP / HTTPS / JSON protocols) - Device to device electronics and firmware (BLE, ISM, WiFi) - BLDC and BDC motor control Summary of processors & tools I use: - Processors: ST Micro STM32F0 / STM32F1 /STM32F3 / STM32F4 / STM32F7, Analog Devices BlackFin BF706 DSP, SHARC 210xx, 2156x, and 214xx DSP - Embedded IDE tools: IAR EWARM, Analog Devices CrossCore Embedded Studio - Embedded IP libraries: Segger emWin GUI, Segger emFile FAT file system, SQLite, OBD Experts vehicle OBD-II, Micrium uC/OS-II RTOS, FreeRTOS, MicroDigital smxFS FAT file system, Closed Loop Design (CLD) USB Audio, Adaptive Digital Noise Reduction - Interface: SPI, I2C, I2S, CANbus, UART, A/D, D/A, PWM, SDRAM, RGB TFT LCD, SAI - Wireless: SimCom SIM7500 LTE, uBlox MAX-M8 GNSS, uBlox NINA-B41 BlueTooth 5.1, Sierra Wireless BC127 Bluetooth, Telit HE910 3G, Linx Technologies GNSS / GPS, Roving Networks RN171 WiFi, Atmel ATWINC1500 WiFi, TI CC1101 sub-1GHz ISM band, MicroChip RN4020 Bluetooth Smart / Low Energy (BLE) - Schematic capture: OrCAD - Drawing tools: AutoCAD LT - Analog simulation tools: CircuitLab - Version control: SubVersion and GIT Project keywords: BLDC and BDC motor control medical devices wearable devices hand held meters OBD electronics brushless brushed DC motors audio CODEC Qi battery charger wireless charging Li-Ion Li-Po battery management BMS STM32F030 STM32F072 STM32F101 STM32F103 STM32F427 STM32F429 STM32F756 SHARC ADSP-21487 SHARC ADSP-21569 CAN bus STM32 ARM Cortex Black Fin Nordic nRF5340 analog electronics digital electronics sensor microcontroller firmware design PCB design rapid prototype firmware development circuit board electronic engineer
    vsuc_fltilesrefresh_TrophyIcon Electronic Engineer
    Analog Circuit
    Circuit Design
    STM32
    Embedded C
    Microcontroller Programming
    Embedded System
    PCB Design
    Microcontroller Design
    Hardware Design
    Digital Electronics
    Firmware Programming
    Electronic Design
    Electrical Engineering
    Prototyping
  • $50 hourly

    • 4.6/5
    • (45 jobs)
    Lifetime self-employed individual with over 30+ years of experience in designing and programming of electromechanic microelectronic systems for industrial and consumer applications and products. Projects included: DSP, Wireless, Bluetooth, Bluetooth Smart, WiFi and consumer playthings, Consumer products, Industrial control, QA data acquisition and visualization, Process control, HMI, CIM/CAM, CNC programming, mechatronic engineering and design. Currently personally located in Spain. My services include: Firmware development, PCB design and assembly, mechanical design, design reviews for production fitness. For prototyping I have in stock 2000+ parts to be prepared for supply chain issues and fast prototyping as well for respond to BOM changes during development. Tools are DesignsparkPCB and Fusion360, full electronic lab including network analyzer. 3D printers and full equipped mechanic workshop for prototyping mechatronic devices or custom enclosures I have been working In the fields of industries: Asphalt, Fertilizer, Concrete, Cement, Injection molding machinery, CNC machinery, combustion Engines, Hydraulic and Pneumatic Systems In the field of consumer products: WiFi, AWS, Audio headset, DMX modules, smart lock, RF enabled tools, smart watch, SubGHz coms and more Programming languages are Assembler, C, C++ Experience with the following brands: Microchip(Atmel) TI Texas Instruments (CC2450, CC1310) NXP Ublox ESP32 RaspberryPI Multi language German, English and Spanish
    vsuc_fltilesrefresh_TrophyIcon Electronic Engineer
    Electronic Design
    ESP32
    Mechatronics
    C++
    Home Automation
    Circuit Design
    Internet of Things Solutions Design
    Microcontroller Programming
    Engineering Design
    Bluetooth
    DesignSpark
    PCB Design
    Mechanical Engineering
    Autodesk Fusion 360
    Product Development
  • $30 hourly

    • 4.1/5
    • (3 jobs)
    Power electronics engineer with 14+ years of experience in modeling, design and analysis of power electronics converters, design and analysis of magnetics for switch mode power supplies and designing and sizing of Electric Motors. Experience in product definations and technology validations of IGBT/MOSFET (both Si and SiC).
    vsuc_fltilesrefresh_TrophyIcon Electronic Engineer
    Electromagnetic Simulation Software
    Microcontroller Programming
    Electrical Design
    Power Electronics
    Embedded System
    Circuit Design
    Simulink
    Power Management
    MATLAB
    Hardware Design
    PCB Design
    Multilayer PCB
  • $64 hourly

    • 4.1/5
    • (69 jobs)
    ✅ Top-Rated Upworker - Senior Hardware Engineer, Mass Production Expert, Firmware and Software developer - To Get Your Project Developed From Scratch To Mass Production. With 20+ years experience in electronics engineering designed power, analog and digital electronics, including PCB, embedded and mechanics design. I have served a wide variety of industries and have developed initial concepts and prototype devices as well as producing products that go into full scale production manufacturing. Key Offerings: •Digital circuits design •Power circuits design •Analog, precision and low noise circuits PCB design •Housing and mechanics for electronics •Consulting in electronics •Cost optimization of existing projects •Developing modern analogues of existing devices •Software and firmware development •Server solutions Projects developed by me include: - Compact single board ARM computer/router - Virtual reality suit for medical purposes - Autonomous, solar-powered lamp with controller for DIN-rail - Smart Battery Management System (BMS) - Linux body cam
    vsuc_fltilesrefresh_TrophyIcon Electronic Engineer
    Microcontroller Programming
    Solar Energy
    Network Engineering
    Analog Electronics
    Server & Virtualization Software
    Firmware
    Product Development
    Electronic Design
    Hardware Prototyping
    Electronic Circuit Design
    Mobile App Development
    KiCad
    Internet of Things Solutions Design
    Embedded C
    PCB Design
  • $65 hourly

    • 5.0/5
    • (14 jobs)
    Electrical Engineer with experience programming professionally in LabVIEW, PLC's and Embedded C projects. Also have experience in schematic and layout using Altium. Have designed and fabricated testing equipment for measurement, control and logging using various electronic methods(PLCs, microcontrollers, LabVIEW applications etc). Have some experience programming IoT devices.
    vsuc_fltilesrefresh_TrophyIcon Electronic Engineer
    Electronic Design
    Automation
    Industrial Automation
    Wiring Design
    LabVIEW
    Control Engineering
    Electrical Engineering
    Microcontroller
    Multilayer PCB
    KiCad
    Altium Designer
    PLC Programming
    Embedded C
  • $40 hourly

    • 4.9/5
    • (137 jobs)
    I am an electronics engineer by profession, passionate and specialize in creating Schematic and PCB design or Layout in multilayers. I have 20 years experience of pcb layout in Altium Designer. PCB Designing, Product designing, Reverse Engineering, Creative Solutions with Electronic. I work in a company based in UK. I can supply a prototype fully tested per your requirements and also run a production for small and medium batches. I can provide a firmware in C and other languages if necessary. All types of MCUs ( Atmel, PICs, ARM, STM etc), programming and debug. Also for products I can offer 3D design and making a prototype.
    vsuc_fltilesrefresh_TrophyIcon Electronic Engineer
    Prototyping
    PIC Programming
    Circuit Design
    Assembly Language
    PCB Design
    Atmel AVR
    Arduino
    IC Solutions PICS
    Product Design
    3D Design
    Reverse Engineering
  • $23 hourly

    • 4.7/5
    • (261 jobs)
    I am a PCB and Hardware design Engineer for 13 years in a respected company. I have many experienced for this job.My daily activity is PCB and Hardware Designer.I am a professional Engineer in this field and I would like to give my best service and High quality to the PCB projects here in Upwork project. I have many jobs for the following Projects: 1.Analog and Digital Boards 2.Arduino 3.Breakout boards 4.Bluetooth 5.WIFI 6.RF design 7.Microcontroller 8.Interfacing boards My jobs : 1.PCB layout design 2.Schematic Capture 3.Library Creation, Symbol, and Footprint 4.Make 3D Components 5.Gerber Generation 6.BOM List My Skill of Softwares: 1.Altium Designer 2.Kicad 3.Eagle 4.Orcad 5.Protel 6.PCB123 7.Diptrace 8.Circuit Maker 9.EasyEDA I always do the best for my client and work as soon as possible.My work time very flexible and I can work Full time every time. Best Regard, Untung
    vsuc_fltilesrefresh_TrophyIcon Electronic Engineer
    Schematic Capture
    Atmel AVR
    Hardware Prototyping
    Technical Support
    Arduino
    STM32F4
    PCB Design
    Eagle
    EasyEDA
    STM32
    DesignSpark
    KiCad
    Altium Designer
    OrCAD
    GSM
  • $81 hourly

    • 5.0/5
    • (22 jobs)
    Professional Summary: Electrical Engineer experienced in developing electronic products and automated test equipment/ procedures for commercial/industrial and aerospace/defense programs. Responsibilities include application of electrical hardware experience, analog / digital circuit design including simulation, validation, project management, efficient documentation including new product cost and excellent oral / written communication skills. Professional Experience: Rexnord Industries LLC (Zurn) 03/2018 –Present Cary, NC Senior Electronic Hardware Design Engineer • Lead hardware design of PCBs for IOT products serving the water control market (pressure relief valve monitors, sensor operated flush valves and faucets, incorporating RF LoRa, USB, Ethernet, I2C, serial, SPI, CAN, etc.). Responsibilities include technical specifications, system design, schematic capture, power management including DC-DC conversion and motor/solenoid control, PCB layout, design for cost, design for test, design for manufacturability, RF performance, EMC and FCC compliance, product safety, Firmware and programming, design validation testing and system integration. ARCA Technology LLC 01/2016 -03/18 Mebane, NC Electrical Engineer • Performed hardware/firmware design of PCBs for teller assisted self-service machines (cash, coin, cards, checks, printers, near field communications, Bluetooth, WIFI, ethernet, USB, serial, etc.). Responsibilities include requirements development, technical specifications, schematic capture, PCB layout, power management, motor control, configuration management, prototyping, design validation testing and systems integration. Ensign Bickford Aerospace and Defense Co. 2010 - 2015 Simsbury, CT Electrical Design Engineer • Lead electrical design of cross functional team (Requirements, schematic capture, simulation, power conversion via numerous topologies, PCB layout, embedded firmware (embedded C, ASM), high voltage DC/DC boost converter design (3.6 VDC to 1200 VDC, 1 W)) for explosive plug used in oil and gas exploration. • Responsible for microcontroller firmware (embedded C, ASM) and hardware design of custom automated test stands utilizing custom printed circuit board designs, and various National Instruments data acquisition components in support of electrical safe and arm devices (ESADs) to perform flight termination on several missile platforms for Raytheon and Lockheed Martin. • Performed electrical design of numerous defense and aerospace applications involving peripherals such as I2C, SPI, USB, ETHERNET, etc. Responsibilities included MIL-STD-810, MIL-STD-461 compliance and conformance to MIL- HDBK- 217. Examples include, shoulder mounted missile (SMAW II logic control unit for USMC) (3 VDC to 1500 VDC, 10 W) and special test equipment for firing actuators aboard several missile platforms, etc. United Technologies Corporation (UTC Power and Pratt and Whitney Power Systems) 2007 – 2010 South Windsor, CT Electrical Design Lead Engineer • Lead the electrical design of the PURE CYCLE, 280 kW, 480 VAC, 3 phase, power plant including power conversion (AC to DC and DC to AC), control firmware (embedded C) and instrumentation. • Validated electrical power generation and control systems for compliance with NFPA 70e (NEC), UL-508, UL-1741, IEEE-519 and IEEE 1547. • Served as the lead technical liaison for electrical systems for contract manufacturers, integrators and customers.
    vsuc_fltilesrefresh_TrophyIcon Electronic Engineer
    Bluetooth
    Microcontroller Programming
    Digital Electronics
    Embedded System
    Firmware Programming
    Testing
    PCB Design
    Hardware Design
    ESP32
    Hardware Prototyping
    Electronic Design
    Product Development
    Product Design
  • $45 hourly

    • 5.0/5
    • (116 jobs)
    Hi, my name is Dmytro. I have over a decade of experience designing electronic products related to analog, digital, embedded MCU and firmware, power supplies and more. I accurately quote and finish projects, following through with promised contracts. Focused on PCB Design/Layout and component selection. Also on the preparation of a PCB for production. My skills: - Altium Designer - Developing electronic circuit diagrams - Developing printed circuit boards ( PCB ) - Programming microcontrollers ARM STM32 - Developing devices for GPS navigation If you have any questions please send me a note, thank you.
    vsuc_fltilesrefresh_TrophyIcon Electronic Engineer
    Microcontroller Design
    Design for Manufacturing
    PCB Design
    ARM Microcontroller
    Arduino
    ESP32
    Multilayer PCB
    Altium Designer
    Electrical Engineering
    Digital Electronics
  • $150 hourly

    • 5.0/5
    • (36 jobs)
    I have over 22 years of experience working and consulting for tech companies in Silicon Valley. Every technical challenge that I had overcome assured me that with the right frame of mind, I could accomplish anything. Engineering is also my hobby, and I have been doing it since before high school. I was born with a soldering iron in one hand and writing code with the other. I designed the hardware for over 100 projects, most of them being sold today. Some notable ones are Snapchat Spectacles (designed most of the electronics and PCB layout), Thornwave Labs' Bluetooth DC Power Meter (PowerMon) and all the other projects on the webpage, various RF modules (RN-171, RN4020, RN52), and development boards designed while working at Microchip. I also created production testers, lots of C/C++ programming, and firmware design. What I can do for you? --------------------------- High Level: project management, research. I am very experienced with hardware design and firmware, which allows me to integrate them more efficiently. Hardware: circuit design, component selection, electrical schematic, PCB payout. I am using Altium Designer. I will provide you with everything you need to go to manufacturing: Gerber files, NC drill, pick and place, assembly diagrams, 3D prints, 3D STEP model, and electrical schematics as well as offer support after the project is completed. I have experience with analog and digital design, RF, high-speed design, microcontrollers, highly complex boards, LCDs. I can run Spice simulations as well. I worked with various technologies and protocols: SPI, I2C, UART, USB, CAN, RS-485, Ethernet, Bluetooth, WiFi, and so on. Prototyping: I will manufacture the prototypes at a much lower cost than average. Over the years, I have developed working relationships with manufacturers in China, hence the cost-saving. I also have a lot of equipment: multimeters, oscilloscope, logic analyzer, vector network analyzer, USB protocol analyzer, power supplies, digital electronic load, soldering equipment, computers, and so on... Certifications: I can assist and oversee the certification process for FCC, IC, and others. Firmware development: I have 24+ years of experience coding in C/C++ and 20 years of firmware development. I can architect and develop your firmware from the ground up. I am exceptionally versed in the ARM Cortex line of microcontrollers: STM32 and Nordic. I will provide you with production-quality firmware. I know the ST and the Nordic microcontrollers like the back of my hand. I can get firmware done very quickly and efficiently for these chips. Software development: Basic tools running in Linux/Windows/Mac, basic GUIs. I can develop all the software tools you need for debugging, testing, and manufacturing. Manufacturing: If your project reaches this phase, I can offer contract manufacturing services. I will be delivering your finished product, ready to sell. The rate I displayed is an average number. It can vary up or down based on the complexity of the project. My rate reflects the experience and knowledge I have. I am good at what I do. Also, keep in mind that I will not bill you for hours like lawyers do for the time they spend in the shower thinking about the project. I will bill you only for the hours I spend advancing the project in a meaningful way.
    vsuc_fltilesrefresh_TrophyIcon Electronic Engineer
    STM32
    C
    RF Microwave Design
    Embedded Operating System
    Industrial Automation
    Linux
    WiFi
    Bluetooth
    Firmware Programming
    Analog Electronics
    Circuit Design
    Power Electronics
    Digital Electronics
    C++
    RF Design
    ARM Cortex-M
    PCB Design
  • $45 hourly

    • 4.9/5
    • (105 jobs)
    🚀 Lead Electronics Engineer with 8 years of experience in innovative electronic hardware device development. ✅ 100% Job Success | TOP RATED PLUS | 100+ happy customers 🚀 Providing FULL-CYCLE product design from Idea -> R&D -> Prototype -> Mass Production. Includes steps such as Electronics Hardware Development, Firmware Programming, App development, Prototype Testing, Debugging, Mass Manufacturing Assist, Regulatory Compliances. ========== ELECTRONICS HARDWARE ========== - Circuit Simulation: Related to Mixed-Signal, Analog, and Power Electronics Circuits. - Schematic/Circuit Design - PCB/Layout Designing - Prepare Design Control Documents - BOM Procurement, Prototype Manufacturing in China & India; - PCB Software: Altium, Diptrace, kiCAD, etc. - Simulation Software - Matlab Simulink, LTSPICE, PSPICE, WEBENCH, MULTISIM ========== EMBEDDED FIRMWARE ========== - Embedded Programming for Microcontrollers such as STM32, nRF5, AVR, PIC, etc. - Worked on Arduino, Raspberry Pi, STM32, and nRF52 Boards Development. - Worked on Bluetooth, WiFi, and other RF Frequency Protocols. - Worked on MEMS / IMU Sensors. - RFID and Fingerprint Circuit Designing. - Create Machine Learning and AI models for IoT projects - Image Recognition based on SensiML and Edge Impulse tool - Firmware Software: Visual Studio, Arduino, Python, AVR Studio; ========== APP DEVELOPMENT ========== - Android App Development - Windows App Development - iOS Development. - API Integration to communicates over BLE/Wi FI to IoT Hardware. - Software - Flutter, NodeJS, etc. ========== MANUFACTURING ========== - Consultation on any aspect of design and manufacturing. - PCB Prototype manufacturing, debugging, and validation; - Mass production final product assembly, testing and final finishing; ✅HIGHLY SPECIALIZED: Worked for various US-based startups and companies focusing mostly on electronics hardware design and firmware development in the following product fields - ✔︎CONSUMER Electronics: - Develop IoT projects, sensors, wearable electronics, Smart-home systems, Computer peripheral devices, Power banks, speakers, Car battery chargers, USB C PD, Battery chargers, etc. - MEMS sensors, sensors, and actuators Interface with Controller with communication protocols such as wi-fi, Bluetooth, BLE, GPS, GSM, LoRa. - Reverse Engineering on Existing Electronics & Electrical Product. - Develop High-reliability systems for Robotics and Automation needs; ✔︎MEDICAL Devices: - Develop an advanced TENS EMS Nerve Stimulator machine, - Develop custom EEG board and EMG board for various medical needs ✔︎POWER Electronics: - Worked on DC to DC, DC to AC, and AC to DC converters in the Power Electronics field. - Experienced in working with power topologies such as Synchronous Buck, Boost, Buck-Boost, Flyback, Push-Pull, Full Bridge, Half Bridge, Phase shifted full bridge. - Thermal Analysis simulation to manage Heat Flow on PCB ✔︎AUTOMOTIVE / ELECTRIC VEHICLES: - On-Board Chargers (OBC) - Battery-management systems (BMS) Access to lab Instruments: Oscilloscope, power supply, function generator, multimeter, Electronics Lab Kit, Raspberry Pi, nRF51, nRF52 modules, and other development kits. Inhouse creality ender 5 plus 3D Printer. -------------------------------------------------------------------------------------------------------- Tags: Electrical Engineer | Electrical Engineering | Electronics | Hardware | Firmware | PCB | PCB layout | Board layout | Schematics | kiCAD | Eagle | CAD | IoT | Internet of Things | Power Electronics | Solar Design | Bluetooth | BLE | TI | Texas Instruments | Analog Electronics | FPGA | SoC | C | C++ | MCU | Microcontroller | prototype | validation | Enclosures | BMS | Python | LTspice | Pspice | Multisim | MATLAB | Arduino | Raspberry Pi | EEG | EMG | ECG | EKG | Reverse Engineering | Wi-Fi | Radio Frequency | GSM | GPS | LoRA | Zigbee | Smart metering | Smartgrid | AVR | PIC | STM | ESP32 | ESP8266 | Embedded System | Electronics | Digital Electronics | Product Design | Circuit Design | DIY | Power System | Grid Designing | AutoCAD | Helioscope | PVsyst | App | iOS | IoT App | Edge Impulse | SensiML | TinyML | IMU | Fitness | Tracker | Gyroscope | Accelerometer
    vsuc_fltilesrefresh_TrophyIcon Electronic Engineer
    Circuit Design
    Electrical Engineering
    PCB Design
    Medical Device
    Power Electronics
    Altium Designer
    Hardware Design
    Analog Electronics
    Product Design
    Design Simulation
    Electronic Circuit Design
    Internet of Things
    Power Management
    Embedded System
  • $28 hourly

    • 4.9/5
    • (65 jobs)
    More than +15 years working on electronic design projects. From High School, University and next with many companies. +50 electronic design projects. I have developed projects from the idea, prototype, testing and volume production. Working +1 year on PCB company I learned PCB DFM (Design-for-manufacture) and next working designing electronic devices to market, I learned to design choosing better components to have availability to mass production, working with outsourcing companies in Taiwan and China. Bachelor of Electronic Engineering since 2008. My final project was an ECG portable to PDA´s., made on SMD and Eagle software. I work on my lab making electronic prototypes and test almost time. I have bench DMM, Function Generator, Oscilloscope and a set of tools to test the PCBs. I have made PCB and electronic design projects for other companies and engineers., which add experience to Schematic+PCB+BOM+Gerber files, excellon files, EPS. Design for manufacture (membrane keypads, plastic cases, Aluminum cases, etc) Embedded programming microcontrollers of the next families: Freescale HC08, HCS08, QT, QG. TI MSP430, Atmel ATTINY, ATMEGA, ARM-SAM3N, STM32, dsPIC. Worked with the next Boards: Arduino (Uno, Mega, Nano), Particle (Photon, Electron), Intel Galileo Gen 1 y 2, Intel Edison. Using the next peripherals and technologies: Interface Bluetooth v2.0, V4.0 module (Parani, Bluegiga, Nordic,), RF modules (Nordic), USB (FTDI), RS232, SPI, I2C, ADC, Qtouch, GPIO. Real experience working with the next software: Eagle Cadsoft, Altium Designer, Orcad, Matlab, Scilab, Pspice, AVR Studio, Codeworks, MPLAB, Android Studio, Autodesk Inventor, Autocad, Corel Draw, Github.
    vsuc_fltilesrefresh_TrophyIcon Electronic Engineer
    Prototyping
    Circuit Design
    Microcontroller Programming
    Digital Electronics
    Embedded C
    Multilayer PCB
    Altium Designer
    Analog Electronics
    Arduino
    ESP32
    PCB Design
    Eagle
    Hardware Design
    Electrical Engineering
  • $35 hourly

    • 4.9/5
    • (69 jobs)
    Experienced engineer specializing in electronics and product design, with a keen focus on intricate printed circuit board designs, prioritizing manufacturability. My expertise spans the entire product development cycle — from conceptualization to prototyping, utilizing in-house tools for design, construction, programming, and rigorous testing. I possess a diverse portfolio, having contributed to various industries. This ranges from formulating initial concepts and building prototype devices, to orchestrating the seamless transition to large-scale production manufacturing. More detail about Embedded platforms of my design experience: Primary Offerings: - Hardware Design and printed circuit board (PCB) layout with Altium Designer - MCAD collaboration for product design - Build and test prototypes(in-house assembly capability and testing equipment) - Help and management in product manufacturing - Troubleshoot and fix incomplete or failed designs - Bare-metal and RTOS based firmware development I have crafted an extensive array of circuit boards, encompassing: - Standard 2 and 4-layer boards with surface mount and through-hole components - HDI boards upto 14-layers - Highspeed boards with controlled impedance and length matching - Flex and rigid-flex boards for complex mechanical shapes - Products having Bluetooth, BLE, WiFi, serial interfaces(SPI, I2C, RS-232, RS-485, CAN) and highspeed interfaces(USB2.0, USB3.0, PCIe, SATA, MIPI CSI-DSI, Ethernet). Whether it entails transforming an existing Arduino/Raspberry Pi prototype into a marketable product or crafting an entirely new offering from its inception, I take pleasure in delivering tailor-made technical solutions that precisely align with your requirements. Have any product idea, contact me through Upwrok to discuss!
    vsuc_fltilesrefresh_TrophyIcon Electronic Engineer
    Electrical Engineering
    FPGA
    Bluetooth LE
    nRF52832
    ESP32
    STM32
    Internet of Things Solutions Design
    Industrial Internet of Things
    Multilayer PCB
    Hardware Design
    Embedded System
    Altium Designer
    PCB Design
    Hardware Prototyping
  • $120 hourly

    • 4.9/5
    • (9 jobs)
    I've been developing various electronic devices for over 15 years. Schematics & PCB layout design, component selection, BOM, reverse engineering, MCU programming. Looking for new challenging projects. Most of my past projects involve physical or mechanical parts. Have experience with 3D mechanical design, CNC/Laser machining, 3D printing and have these equipment on hand in nearby shop. Passionate about refining custom integrated solutions. Innovative, analytical, hands-on approach.
    vsuc_fltilesrefresh_TrophyIcon Electronic Engineer
    Prototyping
    Schematic
    Electronic Circuit Design
    Electronic Design
    Altium Designer
    PCB Design
    Microcontroller
    Reverse Engineering
    Electrical Engineering
    ESP32
    Arduino
    Raspberry Pi
    Electrical Design
  • Want to browse more freelancers?
    Sign up

How it works

1. Post a job (it’s free)

Tell us what you need. Provide as many details as possible, but don’t worry about getting it perfect.

2. Talent comes to you

Get qualified proposals within 24 hours, and meet the candidates you’re excited about. Hire as soon as you’re ready.

3. Collaborate easily

Use Upwork to chat or video call, share files, and track project progress right from the app.

4. Payment simplified

Receive invoices and make payments through Upwork. Only pay for work you authorize.

Trusted by

How do I hire a Electronic Engineer on Upwork?

You can hire a Electronic Engineer on Upwork in four simple steps:

  • Create a job post tailored to your Electronic Engineer project scope. We’ll walk you through the process step by step.
  • Browse top Electronic Engineer talent on Upwork and invite them to your project.
  • Once the proposals start flowing in, create a shortlist of top Electronic Engineer profiles and interview.
  • Hire the right Electronic Engineer for your project from Upwork, the world’s largest work marketplace.

At Upwork, we believe talent staffing should be easy.

How much does it cost to hire a Electronic Engineer?

Rates charged by Electronic Engineers on Upwork can vary with a number of factors including experience, location, and market conditions. See hourly rates for in-demand skills on Upwork.

Why hire a Electronic Engineer on Upwork?

As the world’s work marketplace, we connect highly-skilled freelance Electronic Engineers and businesses and help them build trusted, long-term relationships so they can achieve more together. Let us help you build the dream Electronic Engineer team you need to succeed.

Can I hire a Electronic Engineer within 24 hours on Upwork?

Depending on availability and the quality of your job post, it’s entirely possible to sign up for Upwork and receive Electronic Engineer proposals within 24 hours of posting a job description.

Schedule a call

Looking to hire for long-term or full-time assignments? See how Full-time hiring on Upwork simplifies the process.