Upwork home
Sign up
Secondary

Hire the best Energy Engineers

Check out Energy Engineers with the skills you need for your next job.
Hire freelancers
Clients rate Energy Engineers
Rating is 4.6 out of 5.
4.6/5
based on 117 client reviews
  • $30 hourly

    • 4.6/5
    • (6 jobs)
    Expert in Microsoft Office (Word, Excel, PowerPoint), worked for several companies as a data analyst, worked on an EU project (Ecosystems and Urban Planning for Paris Olympic Games 2024), worked with energy and air quality data. Master's degree from one of the best 50 universities in the world (PSL University - Mines ParisTech). Continuous learning.
    vsuc_fltilesrefresh_TrophyIcon Energy Engineering
    Wind Energy
    Online Research
    Sustainable Energy
    Solar Energy
    Solar Design
    English
  • $60 hourly

    • 5.0/5
    • (85 jobs)
    I am a green building consultant specializing in LEED certification and energy modeling. As a civil engineer with a master’s degree focused on green buildings, I am a LEED Accredited Professional and Building Energy Modeling Professional (BEMP). I have been working as a green building consultant since 2011 and have completed projects in various countries, including but not limited to the USA, Japan, Israel, and Turkey. My LEED projects have more than 20 million square feet of building area and seven are certified as LEED Platinum. I provide comprehensive green building consultancy services with my specialized knowledge and years of hands-on experience. I actively cooperate with international clients and provide remote services by maximizing communication and efficiency. My clients are building developers, designers, contractors, engineers, and consultants who seek specialized green building/LEED assistance and energy modeling services for their projects. I use Designbuilder and EnergyPlus software which is developed by the US Department of Energy and is one of the most widely accepted modeling software. Designbuilder is a powerful tool for energy modeling and also daylight simulations. As an active member of USGBC, I participated in the pilot credit committee and provided LEED and energy modeling training in various organizations including Green Building Councils in Turkey and Georgia, Chambers of Turkish Engineers and Architects, several universities, and multinational corporations. Certified LEED AP BD+C since 2011 and ASHRAE BEMP since 2019. I have a B.Sc. degree in Civil Engineering and M.Sc. degree in green building and energy efficiency. My English TOEFL score is 107/120. My services: - Energy modeling (energy simulation) using Designbuilder and EnergyPlus software - Energy performance reporting and compliance documentation - LEED certification, green building, and energy efficiency consultancy - LEED certification management and documentation - Daylight simulation - CFD and natural ventilation analysis - Urban shadow analysis - Building life-cycle analysis
    vsuc_fltilesrefresh_TrophyIcon Energy Engineering
    Building Energy Certification
    LEED Standard
    Sustainable Design
    EnergyPlus
    Energy Modeling Software
    Energy Simulation
    Sustainable Energy
    LEED Consulting
    DesignBuilder
    Sustainability
  • $24 hourly

    • 4.9/5
    • (63 jobs)
    Experienced energy and sustainability consultant, specialized in simulating and measuring energy performance and sustainability to provide valuable insights for your projects. With over 5 years of expertise, I've assisted clients in achieving regulatory compliance and high levels of energy efficiency through the most practical and feasible solutions. My expertise includes: 🏅 LEED Certification 🖥 Energy Modeling Software: Proficiency in DesignBuilder, EnergyPlus, IESVE, and eQuest for energy-efficient design. 📚 Energy Performance Codes: In-depth understanding of Title 24, ASHRAE 90.1, NECB, NCC, and UKBR for energy code compliance. ✳️ Energy Efficiency Strategies: Implementing strategies guided by Better Buildings Challenge, IECC, and ANSI/ASHRAE/IES 90.1. ♻️ Sustainability Reporting: Strong knowledge of GRI, TCFD, SASB, UNGC, and ISO50001 for comprehensive sustainability reporting. 🧾 Indoor Environment Assessments: Conducting assessments, including daylight analysis, thermal comfort, and natural ventilation, to enhance indoor environmental quality. ☀️ Renewable Energy Integration: Alignment with IREC, IEEE 1547, and regional standards for seamless integration of renewable energy sources. 📑 Energy Audits: Compliance with ASHRAE 211, ISO 50002, and ENERGY STAR Guidelines for efficient energy audits. 🏭 Carbon Footprint Reduction: Reducing carbon footprint in accordance with GHG Protocol, ISO 14064, and industry-specific guidelines. 📊 Energy Management Systems (EMS): Designing EMS compliant with ISO 50001, ANSI/ASHRAE 135, and ISO 27001 for effective energy management. 🧾 Green Building Certifications: Pursuing certifications like LEED, BREEAM, Green Globes, and Living Building Challenge. 📜 Energy Performance Contracting: Adherence to DOE ESPC program, FEMP standards, and ESCO industry best practices. 📘 Policy and Regulation Compliance: Ensuring compliance with EPBD, local codes, ASHRAE Standards, and sector-specific regulations. 📉 Cost-Benefit Analysis: Conducting analyses in line with IPMVP, ROI, NPV calculations, and industry-specific standards to inform decision-making.
    vsuc_fltilesrefresh_TrophyIcon Energy Engineering
    LEED Consulting
    CFD Analysis
    Sustainable Energy
    Energy Modeling Software
    eQUEST
    ANSYS
    DesignBuilder
    EnergyPlus
    PVSyst
    PV Sizing
    Building Energy Certification
    Energy Simulation
    HAP
    Energy Optimization
  • $50 hourly

    • 4.8/5
    • (75 jobs)
    I am a Chemical Engineer with 15 years of experience as a Process Design Engineer at Oil & Gas Industry. I'm a Certified Energy Manager (CEM) from Association of Energy Engineers (AEE). I'm a Certified Process Safety Engineer and ISRS Assessor. I have extensive experience with: - Process simulation (Aspen Hysys ,Aspen Plus, Pro II) - Process Optimization - Process Flow Diagram(PFD) development - Heat and Material Balance development -Piping and Instrumentation Diagram (P&ID) development (AutoCAD, Microsoft VISIO) - Process Hazard Analysis (HAZID, HAZOP, SIL, LOPA, QRA, FERA, EERA, FMEA, FMECA, FTA, ETA) - Feasibility studies. - Process Data Sheets development (Equipment Sizing) - Cause & Effect diagrams development - Hydraulic Calculations (AFT Fathom, AFT Arrow) - Energy Efficiency Optimization I developed an accumulated experience as an instructor: - In-class and online training - Preparing course materials. - Preparing course outlines and exams I contributed in preparation, implementation and auditing of management standards for companies: - Quality Management System ISO 9001 - Environmental Management System ISO 14001 - Occupational Health and Safety Management System ISO ISO 45001 - Energy Management System ISO 50001 - Process Safety Management (PSM) OSHA 1910.119, PAS 55 and Seveso II
    vsuc_fltilesrefresh_TrophyIcon Energy Engineering
    Process Modeling
    Process Optimization
    Process Flow Diagram
    HAZOP
    Aspen HYSYS
    Process Safety
    Piping & Instrumentation Diagram
    Process Simulation
    Process Design
    Feasibility Study
    Chemical Engineering
    Energy Optimization
    Process Engineering
    Autodesk AutoCAD
  • $15 hourly

    • 5.0/5
    • (7 jobs)
    I am a highly experienced engineer focused in the renewable energy area, having worked for more than 8 years in different hydroelectric, wind and solar plants, and in different stages of projects such as studies, construction, operation and maintenance. My academic background and work experience allow me to cover with confidence and a high degree of knowledge, any of the following topics: - Solar photovoltaics - Solar thermal - Wind - Hydro - Biomass - Green hydrogen - Smart Grids - Energy efficiency - Electric energy plants operation and maintenance - Utility scale renewable plants project management - Design of renewable energy projects (both distributed generation and utility scale) - Electromobility - Others My service covers, but is not limited to, the elaboration studies, reports, articles, investigation documents, papers, slideshows, illustrations, software calculations, and many other requirements on the area
    vsuc_fltilesrefresh_TrophyIcon Energy Engineering
    Technical Editing
    Technical Writing
    Energy
    Sustainable Energy
    Electrical Engineering
    Hydropower
    Solar Energy
    Wind Energy
  • $200 hourly

    • 4.8/5
    • (61 jobs)
    * Supervising Engineer * Plan Review / PE Stamping * Project Management * Building / Mechanical Code Compliance * Drawing / Specification Package Preparation * BIM/VDC * Certified Commissioning Authority (CxA) Professional Engineer licensed in the following states: CA - California FL - Florida NM - New Mexico NY - New York OH - Ohio TX - Texas Extensive experience designing HVAC, mechanical, refrigeration, plumbing, and high-performing advanced control systems in various building types and sizes across residential, healthcare, commercial, industrial, manufacturing, aviation, higher education, and combined heat and power markets. I have an extensive understanding of the International Building, Mechanical, Plumbing, Fuel Gas, Fire, and Residential Codes, as well as NFPA, ASHRAE, ASME, ANSI, and ASSE standards. All designs are performed in 3D with Autodesk Revit, or other CAD / BIM programs per request. Mechanical Systems of Note: -Hot Water Boiler -Low and High Pressure Steam -Chilled Water -Process Cooling -Combined Heat and Power Plants (CHP) / Cogeneration / Trigeneration -Central Refrigeration Systems (Ammonia / CO2 Cascade, Transcritical CO2) -Geothermal -Heat Pumps (ground, water, air source) -VAV Variable Air Volume, Low / Medium / High Pressure duct systems -VRF / Energy Recovery Ventilation -Industrial HVAC / Hazardous Exhaust Systems -Heat Recovery Finite Element Analysis: Advanced piping design. FEA pipe stress test analysis for thermal stresses on power piping, high-pressure steam, low temp refrigeration, process piping, and other pipe systems. Expertise with the following ASME piping codes: -B31.1 Power Piping -B31.3 Process Piping -B31.5 Refrigeration Piping and Heat Transfer Components -B31.9 Building Services Piping -BPE Bioprocessing Equipment (Pharmaceutical Process Piping) Computational Fluid Dynamics: CFD for advanced HVAC and thermal/fluid designs. Simulations of smoke control systems, data center cooling design, large open atrium, industrial HVAC and process piping, etc. Preconstruction Coordination / BIM / VDC: I model 2D plans in 3D and perform clash detection to ensure interdisciplinary coordination before construction. In addition, I have a 3D laser scanner which I use to generate extremely accurate 3D point clouds for use in Revit, Navisworks, and AutoCAD to generate precise as-builts. Energy Engineering: I have extensive experience analyzing and simulating existing and new energy systems to identify energy conservation measures. These systems include boilers, chillers, compressors, air systems, thermal oxidizers, industrial processes and heat recovery opportunities. I am able to leverage powerful tools built into Excel such as Power Query, as well as programmable Open Modelica simulations of energy systems. In addition, I provide life-cycle, NPV, IRR calculations to establish project feasibility. Software Capabilities: Autodesk Revit Autodesk Plant3D Autodesk AutoCAD Autodesk Navisworks Manage / Simulate Autodesk ReCap Pro Autodesk Inventor Pro Nastran In-CAD FEA Matlab Open Modelica Python Simulink Simscape Danfoss Coolselector2 Carrier HAP Hourly Analysis Program MS Office / Excel / Power BI
    vsuc_fltilesrefresh_TrophyIcon Energy Engineering
    Process Engineering
    MEP Design
    Energy Simulation
    Mechanical Design
    Energy Management
    HVAC System Design
    Building Design
    Building Information Modeling
    Plant Design
    Plumbing
    Mechanical Engineering
    Computational Fluid Dynamics
    3D Design
  • $25 hourly

    • 4.8/5
    • (214 jobs)
    Top-rated electrical engineer; Specialized in ✅Electrical Design, ✅EV Charging,✅Lighting & Power Layout, ✅Panel Schedule, ✅Fire Alarm Layout, ✅Lighting photometric plan (by Dialux), ✅Quantity Takeoff, ✅Electrical BIM modeling, and ✅As-Built Drawing For the past 12 years. Having worked with clients from the United States, Australia, Israel, and India for over a decade, I understand the significance of meeting project goals and deadlines while working remotely. Through clear communication on each milestone and focusing on the final result, delivery will be prior to the deadline every time. Results will exceed your expectations! Feel confident to entrust me with your project, share your vision and get great results! 100% job success rate on Upwork. My expertise in software includes ✅Revit, ✅AutoCAD, ✅DiaLux, ✅Elum Tool, ✅Relux, and ✅Bluebeam. We can expand our team up to 40 resources per real-time requirements. The below testimonials (taken directly from my Upwork profile) prove that we can deliver those results with zero worries. "Repeat customer here. Debabrata did another great job modifying a floor plan. Very responsive and always hits deadlines. I will be using his services again!" "Debabrata is a pleasure to work with, he is very knowledgeable and always produces great work. He communicates well and is always willing to help, even when a quick turn around is needed." I have spent 5100+ hours on electrical and lighting projects in Upwork alone. If you need any assistance with your project, I'd be happy to answer your questions.
    vsuc_fltilesrefresh_TrophyIcon Energy Engineering
    Electrical Layout Design
    Power Distribution
    Autodesk Navisworks
    Architectural Design
    Plumbing
    HVAC System Design
    Building Information Modeling
    Wiring Design
    Electrical Engineering
    Mechanical Engineering
    BIM Family Creation
    Electrical Design
    CAD
    3D Modeling
  • $165 hourly

    • 4.8/5
    • (164 jobs)
    My name is Matt Chester, and I am an energy and policy professional located in Orlando, FL (by way of Washington, DC). I have over a decade of experience working in energy technology, federal energy policy, and other related fields. My educational background includes a BS in Mechanical Engineering from the University of Virginia, graduating with high honors and a focus on both Civil Engineering and Science & Technology Policy. I have since held a number of positions in the energy technology and energy policy fields, focusing mainly as a consultant contracting with the Department of Energy (DOE). I have worked with a number of Offices and Laboratories in DOE, including the Office of Energy Efficiency & Renewable Energy (EERE), the Energy Information Administration (EIA), the Office of the Chief Information Officer (CIO), and more. Among the varied array of projects I’ve been a part of at DOE are supporting the public rulemaking process for EERE’s Appliance and Equipment Standards Program (contributing to areas including the engineering analyses, market analyses, and government and technical writing), providing quality control and fact check reviews for public facing documents and reports, and assisting with the project management of updating the cyber security requirements for DOE employees and contractors. I’ve also had the opportunity to work at a D.C.-based non-profit for energy policy issues to research and analyze green building technologies and initiatives. Starting in late 2017, I created Chester Energy and Policy (www.ChesterEnergyandPolicy) where I research, conduct analysis, and write on all topics across the industries of energy efficiency, renewable energy, sustainability, federal energy/climate change policy, and more. I've been using Upwork successfully to find opportunities to work with new people/companies, generate partnerships, collaborate with new clients, and create ongoing relationships that allow me to build my business, and more. As I develop the work I've done for clients, some new skillsets I've developed that I can offer out to you include: - Podcast creation, writing, production, editing, and publication - Community management to build an audience for and engagement in online communities - Educational tool creation, including presentations, reading syllabuses, quizzes/tests, and more - Grant writing, grant research, and responding to RFPs as they relate to the field of energy (particularly with government grants) For any of the above, please reach out to me directly and I'd be happy to send samples and examples of my work, as well as references!
    vsuc_fltilesrefresh_TrophyIcon Energy Engineering
    Market Research
    Writing
    Copy Editing
    Content Marketing Strategy
    Data Analysis
    Energy Optimization
    Blog Writing
    Grant Writing
    Sustainable Energy
    Microsoft Excel
  • $12 hourly

    • 4.9/5
    • (26 jobs)
    ★TOP-RATED PLUS FREELANCER★ ★From A Client Review, July 2023: "Sagar Bhayani,'s skill set, quality of work, availability and great communication is what stood out for me. Sagar provided great service through our this process.. I would refer and use him and his team again without a doubt." I offer Comprehensive MEP Design, BIM, Construction Drawings & Administration Services, Plan Reviews, Project Management, and More With 14 years of extensive experience, I specialize in designing HVAC, mechanical, electrical plumbing, and fire protection systems across a diverse range of building types, including residential, restaurant, healthcare, commercial, industrial, aviation, higher education, and combined heat and power markets. My expertise extends to ensuring compliance with International Building, Mechanical, Plumbing, Fuel Gas, Fire, and Residential Codes, as well as standards from NFPA, ASHRAE, UPC, and ICC. Key Services Include: 1. MEP Design & Construction Drawings: • Thorough design of HVAC, mechanical, electrical plumbing, and fire protection systems. • Preparation of detailed construction drawings and comprehensive administration services. 2. BIM/VDC (Building Information Modeling/Virtual Design and Construction): • 3D modeling (Revit, AutoCAD FAB MEP) • Rendering and Walkthrough (3Ds Max and V-ray) • Clash coordination (Navisworks, Revit) • Shop drawing (AutoCAD, Revit, MicroStation) • BOQ generation (Revit, AutoCAD, AutoCAD FAB MEP) • 4D(Time) 5D(Cost) simulation (Navisworks) • Facility management (Revit, Cobie) • Design validation (Revit, manual) 3. Plan Review & Code Compliance: • In-depth plan reviews to guarantee adherence to building and mechanical codes. • Expertise in building and mechanical code compliance. 4. Project Management: • Efficient project management services to ensure timely and successful completion. 5. Permit Stamp Service: • Peer review and code compliance checks. • Permit stamping service available in more than 35 states across the USA. 6. Energy Engineering: • Extensive analysis and simulation of energy systems for identifying conservation measures. • Expertise in assessing boilers, chillers, compressors, air systems, thermal oxidizers, and heat recovery opportunities. • Utilization of powerful tools such as Excel Power Query, Matlab, and Simulink for simulations. • Life-cycle, NPV, and IRR calculations for project feasibility. 7. Software Capabilities: • Proficient use of Autodesk Revit, AutoCAD, Navisworks Manage/Simulate, and Fluid. • Expertise in HAP, Trane Trace 700, Elite CHVAC for energy-related simulations. • Utilization of MS Office, Excel, and Power BI for comprehensive project management. "Experience the Difference in MEP Services—Precision, Compliance, and Innovation"
    vsuc_fltilesrefresh_TrophyIcon Energy Engineering
    MEP Design
    Mechanical Design
    Drafting
    Electrical Engineering
    Load Calculation
    Plumbing
    HVAC System Design
    Fire Protection Engineering
    Electrical Design
    Hydraulic Engineering
    Autodesk AutoCAD
    3D Modeling
    Energy Simulation
    Autodesk Revit
  • $20 hourly

    • 4.9/5
    • (52 jobs)
    I have 10 years of expierence as a freelancer Architect assisting foreign and local customers. In this time I have helped many companies to improve their products and services. I can provide architectural design, Interior desing, shop drawings, construction documents, bioclimati advise, renders. I will do everything I can do to satisfy customers expectations. I love challenges, team working, collaborate in any kind of project from a finish material to a large building design. I’m flexible with my working hours. Quality and deadlines are 2 basic principles in my work, these are my brand stamps, I will follow your ideas, adding a new view when it will be neccesary, and also I will review your comments as many times as it takes to exceed your expectations. Thank you for stopping by and I look forward to the opportunity to work with you on your next Architecture Project.
    vsuc_fltilesrefresh_TrophyIcon Energy Engineering
    Drafting
    Software Architecture & Design
    Sustainable Energy
    English to Spanish Translation
    Autodesk BIM 360
    Residential Design
    Detailed Design
    3D Modeling
    Building Information Modeling
    Autodesk AutoCAD
    Autodesk Revit
    Interior Design
    Architectural Design
  • $60 hourly

    • 5.0/5
    • (5 jobs)
    o Project Management Professional (PMP) o Certified Energy Manager (CEM) o Certified Measurement and Verification Professional (CMVP) o Process-driven energy consultant with 10 years of experience in the energy efficiency and sustainability domain, managing decarbonization projects, conducting energy audits, energy and emissions analysis & consulting and supporting lean six sigma projects o Manufacturing experience in leading lean projects resulting in process optimization, enhanced business operations, and annual monetary savings Specialties: Sustainable Consulting, Energy assessment, eQuest Energy Modeling, Energy efficiency, Carbon Emissions, Business process improvement, Lean manufacturing, Advanced Excel, Python
    vsuc_fltilesrefresh_TrophyIcon Energy Engineering
    Financial Analysis
    Financial Modeling
    Microsoft Excel
    Data Science Consultation
    Sustainable Energy
    Mechanical Engineering
    Data Modeling
    eQUEST
    Process Improvement
    Project Management
    Engineering Management
    Machine Learning
    Data Analysis
    Python
  • $60 hourly

    • 5.0/5
    • (63 jobs)
    I am a licensed Mechanical Engineer who provides Professional Engineering services for residential and commercial construction projects. I am also certified by ASHRAE and ACCA as a designer for commercial and residential buildings. My areas of expertise include MEP Design, Mechanical Design, HVAC design, Plumbing Design, Electrical Design, load calculations, energy code compliance, energy modeling, Architectural, Floor plans and Site plans. My PE capability allows me to be a one-stop-shop for research, design, review, and certification of plans, drawings and engineering documents. I'm also proficient in: Mechanical Design Electrical Design Plumbing Design HVAC Design Consultation Research Design Project management PE design, review, stamp and seal Energy Modeling Energy Code Plan Reviews REMRate, Ekotrope, eQuest, Energy Gauge, Beopt, Revit & Beopt software services Energy Code Analysis, Research & Updates Energy Efficient HVAC Systems Design and Analysis Load calculations Energy management RESNET ASHRAE 90.1 compliance IECC compliance ENERGY STAR Compliance COMCheck & RESCheck Energy Calculations Renewable Energy Green Building Cogeneration Comprehensive services in MEP Energy Audits, Analysis, and Conservation Studies Mechanical Permits Commissioning & Retro-Commissioning Manual J Manual S Manual D Manual T Manual N Manual Q Residential Load Calculations Residential Duct System Design Commercial Load Calculation Commercial Duct System Design Site Plan Floor Plans Architecture Pressure, Velocity Duct Design System Design and Equipment Sizing Airflow Distribution Design and analysis HVAC Quality Installation Specification ACCA Standard 5 ACCA Duct Slide Rule ACCA/ANSI Quality Installation Specification Architectural Design including floor plans.
    vsuc_fltilesrefresh_TrophyIcon Energy Engineering
    Mechanical, Electrical & Plumbing Systems
    Mechanical Design
    Energy Simulation
    MEP Design
    Electrical Drawing
    Building Energy Certification
    Energy & Utilities
    HVAC System Design
    AutoCAD HVAC Loads Calculations
    National Electrical Code
    Plumbing
    Electrical Layout Design
    Mechanical Engineering
    Electrical Engineering
    Energy Optimization
    Electrical Design
    Autodesk Revit
  • $70 hourly

    • 4.8/5
    • (235 jobs)
    I'm 15 years experience teaching Chemical Engineering. My specialty is chemical engineering problem solving in Fluid Mechanics, Material and Energy Balances, Thermodynamics, Heat Transfer, Separation Processes, and Chemical Reactors, with computational tools like Maple, Mathcad, and Matlab; and simulation using Aspen Plus, Aspen Hysys, and Pro/II. My mother language is Spanish, so I can help you if you need information in my field in that language. My Area of interest is Researching, I consider that advance of science and engineering depends strongly on Researching. Well, I hope that my knowledge and experience can help you with your projects.
    vsuc_fltilesrefresh_TrophyIcon Energy Engineering
    Petroleum Engineering
    Aspen HYSYS
    MATLAB
    Process Simulation
    Maple
    Process Engineering
    Spanish English Accent
    Mathematics Tutoring
    Teaching Algebra
    English to Spanish Translation
    Equipment Sizing
    Chemical Engineering
    MathCad
  • $25 hourly

    • 5.0/5
    • (14 jobs)
    I’m a mechanical engineer with 8-10 years of experience in the HVAC and Energy engineering for residential and commercial projects. My design experience has being with multiple building project types, some remarkable are Kitchens/Restaurants, Warehouses, Offices, multifamily, single residential, Hotels, Self-storages, Hospitals/Clinics, Manufacturing and others. I am well familiar with US international Mechanical and Energy conservation codes, and I can attain to follow any other local code. As daily basis my tasks are: • Perform Load calculations per Manual J or ASHRAE procedures on Residential or commercial(With Elite RHVAC and Carrier HAP). • Asses Buildings energy modeling and optimize envelope requirements for energy compliance (Carrier HAP/Energy Plus, Rescheck and Comcheck). • Size and optimize cooling heating and ventilation equipment (Air handlers, fan coils, heat pumps, Furnaces etc). • Perform pressure drop calculations to ensure more than a rule of thumb for duct sizing and air distribution. • Address proper air and duct distribution, duct sizing in CAD format. • Prepare drawings with sheets notes and templates for any plan submittal. My background is BSc in Mechanical Engineering design + on going years of multiple courses and certificates from the energy field and HVAC engineering (ASHRAE). I’m Greenbelt Six sigma cert which helps me understand quality in the business. I really want to participate in any international project as I want to expand my career and great opportunities and contribute to a better planet. Let’s move forwards.
    vsuc_fltilesrefresh_TrophyIcon Energy Engineering
    Mechanical Design
    Hydraulic Engineering
    Energy Optimization
    Energy
    Engineering Design
    Energy Simulation
    ASME B31.3
    3D Modeling
    Mechanical Engineering
    HVAC System Design
  • $10 hourly

    • 4.5/5
    • (37 jobs)
    I am a Professional Registered Chemical Engineer with PEC, having four years of process industry experience as well. I have been working as chemical engineer specialist in process and product formula. I have also experience in Microsoft Visio for process related diagrams(PIDs). My expertise in process design and optimization has allowed me to deliver successful projects in a variety of industries, including pharmaceuticals, cosmetics, petrochemicals, and food processing. I have a deep understanding of process safety and environmental regulations and am committed to delivering projects that comply with all applicable regulations. I have done work Related to Thermodynamics, Reaction Engineering and Design, Heat Transfer, Plant Design, Design of basic Industrial Equipment's like Heat Exchanger, Distillation Column, Reactor Design of any type, Gasifier Design, absorption column and related work to chemical engineering . I will do work according to the demand of the client and their requirement is my priority. it would be nice to work with you. Thanks for visiting to my profile
    vsuc_fltilesrefresh_TrophyIcon Energy Engineering
    Technical Writing
    Article Writing
    Organic Chemistry
    Microsoft Office
    Microsoft Visio
    Chemical Engineering
    Presentations
    Scientific Research
    Cosmetics
    Chemistry
    Aspen HYSYS
    Process Safety
    Flowsheet
  • $150 hourly

    • 4.3/5
    • (15 jobs)
    A detail oriented and science minded chemical engineer by trade, I excel at process optimization, thinking outside of the box and coming up with creative ways to solve problems, save energy and increase cash flow. I have experience in mineral & metal processing & refining, bio-refining and bio-products, corrosion analysis, water treatment and waste water handling. I have an extensive analysis skill set that includes concrete statistical knowledge as well as formal education on experimental design & stimulus/response screening & optimization. I have an entrepreneurial background, and perform well in small, highly robust teams as well as individually or part of a larger group. Perhaps most importantly however, I have proven experience transforming these skills into dollars - as shown by my project portfolio, containing new product lines, reduced operating expenses, extensive research results and extensive hard payback dollars generated.
    vsuc_fltilesrefresh_TrophyIcon Energy Engineering
    Process Design
    Process Optimization
    Process Safety
    HAZOP
    Risk Assessment
    Biology
    Chemical Engineering
    Economic Analysis
    Sustainable Energy
    Process Engineering
    Root Cause Analysis
    Data Analysis
    Chemical Analysis
    Chemistry
  • $20 hourly

    • 4.9/5
    • (9 jobs)
    I'm a sustainable architect with expertise in BIM, performance modeling, and optimization. I love working with clients to create eco-friendly buildings, blending my design and analysis skills. With a strong background, I'm excited to shape the future of sustainable construction. Over the past decade, I've gained valuable expertise in the design process, enabling me to offer my employer comprehensive services throughout various stages. I'm here to support and collaborate on your project with the services I've described. Pre-Design Services: • Conducting Feasibility Studies • Developing Preliminary Concepts • Reviewing Local and International Laws and Regulations • Collaborating with the client to brainstorm ideas • Creating and presenting initial design concepts • Analyzing energy, daylight, wind, and architectural parameters systematically • Optimizing initial plans during the pre-design phase • Providing conceptual diagrams to illustrate the project's initial design • Offering 3D renderings and architectural animations Schematic Design and DD Services: • Creating 3D models to assess design options • Preparing preliminary 3D renderings for a better understanding of design choices • Developing building energy models • Optimizing energy efficiency and evaluating its impact on building volume and design options • Ensuring compliance with relevant regulations and laws • Designing interior and exterior spaces • Planning landscaping for the project site • Coordinating with other construction disciplines to prevent conflicts • Optionally, modeling the structure and mechanical systems as per the client's request Construction Documents Services: • Generating construction documents • Preparing construction drawings with varying levels of detail (LODs 200-400) • Providing 2D details • Offering highly accurate 3D details in line with project requirements Renovation Services: • Updating existing condition maps and creating as-built maps • Developing 3D models of the current state • Presenting renovation plans • Creating new design models • Showcasing interior and exterior designs, including real photos and architectural walkthrough and flythrough animations • Converting 3D scans (point cloud data) into detailed Revit models I offer specialized expertise in the following areas: • 3D modeling: Proficient in Revit, AutoCAD, Rhino, and SketchUp. • 3D visualization: Experienced in using Lumion and Photoshop for building visualization. • Building Information Modeling (BIM): Skilled in Revit. • Energy Modeling: Capable of simulating building energy performance using DesignBuilder, EnergyPlus, OpenStudio, and Ladybug Tools to optimize and assess energy efficiency. • Daylight Modeling: Experienced in daylight analysis using tools like Ladybug Tools and DesignBuilder to enhance visual comfort and reduce energy consumption. • Parametric Modeling: Proficient in creating complex geometries and conducting performance analysis using Grasshopper and Ladybug Tools. • Life Cycle Assessment: Knowledgeable in LCA tools for sustainable design. Please let me know your specific project requirements, and I'll tailor my architectural and performance analysis skills to meet your needs effectively. Thank you for considering my expertise and services. I look forward to the possibility of working with you on your next project
    vsuc_fltilesrefresh_TrophyIcon Energy Engineering
    Rhinoceros 3D
    Grasshopper 3D
    EnergyPlus
    DesignBuilder
    Energy Modeling Software
    3D Animation
    Interior Design
    Building Information Modeling
    Energy Simulation
    Autodesk AutoCAD
    Autodesk Revit
    3D Rendering
    3D Modeling
    3D Design
  • $80 hourly

    • 4.9/5
    • (80 jobs)
    Mechanical engineer specialised in product development through Computational Fluid Dynamics (CFD). My 15+ years experience focuses on applying CFD in a wide variety of sectors and challenges, from industrial OEMs to architecture studios. CFD is a computer simulation that delivers high-level 3D technical insight about the thermal and aerodynamic performance of any design, thereby drastically improving any decision making process. Intended to significantly shorten development costs and times-to-market, CFD turns out specially useful in the early stages of any design process. They allow to tackle otherwise intractable complex subjects such as heat transfer, ventilation of complex spaces, energy efficiency, etc.
    vsuc_fltilesrefresh_TrophyIcon Energy Engineering
    Engineering Modeling Software
    Research & Development
    Sustainable Energy
    Energy Simulation
    Engineering Simulation
    Engineering Design
    Design Simulation
    Industrial & Product Design Consultation
    Flow Simulation
    CFD Analysis
    Finite Element Analysis
    Product Development
    Product Design
    Computational Fluid Dynamics
  • $120 hourly

    • 5.0/5
    • (4 jobs)
    Highly resourceful and results-oriented process engineer with extensive track record of success in R&D, fluid flow dynamics (CFD simulation), industrial gas and liquid treatment, reactive transport modeling, and project management within Oil and Gas Industry. Skilled in developing process designs and plans to improve production environment and performance. Specialized knowledge in complex separations for Oil & Gas and chemical industries, optimizing processes for enhanced operational efficiency. Proficient in project estimating, budgeting, and meticulous tracking for large-scale service and research projects, ensuring efficient resource allocation and cost-effective execution. Advanced troubleshooting and pilot testing expertise across diverse environments including gas plants, refineries, chemical facilities, and biogas plants, resolving operational challenges. Adaptable professional with strong engineering knowledge, technical judgment, and extensive experience, capable of providing practical solutions and effectively collaborating at all levels of organization.
    vsuc_fltilesrefresh_TrophyIcon Energy Engineering
    Python
    Engineering Simulation
    Process Engineering
    Research Methods
    Chemical Engineering
    Scientific Computation
    Computational Fluid Dynamics
    ChemCAD
    Aspen Plus
    Aspen HYSYS
    Process Flow Diagram
    Process Development
    Process Modeling
    MATLAB
    CFD Analysis
  • $15 hourly

    • 5.0/5
    • (5 jobs)
    Hello, I'm an expert Mechanical Design Engineer having experience for a long time (5 years). I create creative mechanical designs in SolidWorks, Inventor, Fusion 360, and Autocad and I use Keyshot for rendering and Ansys for Simulation. I've worked with guarantee and my clients prefer to work with me for a long time due to their satisfaction on my work. I can deliver you the design that is required for your project, for manufacturing, for 3D printing, and for mass production. I can supply you with the design according to your given dimension and also if you don't have the exact dimension I can make it for my client.
    vsuc_fltilesrefresh_TrophyIcon Energy Engineering
    Content Writing
    KeyShot
    Content SEO
    Wiki
    Wikitude
    Rendering
    Wikipedia
    Design Simulation
    3D Modeling Software
    Autodesk Inventor
    Autodesk AutoCAD
    Autodesk Fusion 360
    3D Design
    3D Modeling
    SolidWorks
  • $60 hourly

    • 5.0/5
    • (9 jobs)
    I am an energy efficiency engineer proficient in IES VE. Also proficient in LEED, BREEAM, WELL, daylight analysis, CFD simulations and REVIT
    vsuc_fltilesrefresh_TrophyIcon Energy Engineering
    Civil Engineering
    HVAC System Design
    Energy Simulation
    AutoCAD HVAC Loads Calculations
    LEED Standard
    LEED Consulting
    Mechanical Design
    Computational Fluid Dynamics
    3D Modeling
    Building Information Modeling
    Autodesk AutoCAD
  • $150 hourly

    • 5.0/5
    • (5 jobs)
    Professional Summary * Excellent reputation for solving problems, improving customer satisfaction, and driving overall operational improvements. * 8+ years of hands on experience with varied projects like coal/biomass gasification, sustainable energy, carbon capture technologies, hydrogenation, gas cracking, solids handling, alternative energy/sustainability related processes. * Worked for the Start-Up and Commissioning of a "First-of-its-Kind" 600 MW Integrated Gasification Combined Cycle facility (Kemper IGCC Power Plant, Southern Company). * Experience implementing capital projects (> 1MM USD). * Experience in working on industrial scale research projects with respect to pre and post combustion CO2 capture processes. * Experience with conceptual design, proposal development, operation and evaluation of process systems including scale-up experience from bench to commercial for Zero Liquid Discharge (ZLD)/membrane filtration systems.  Experience in design and operation of systems applied to treat industrial/process water containing ultrafine solids.  Excellent skills with process engineering/modeling, designing reactors/ equipment, optimization, troubleshooting.  Experience working with OIS Process Historians, Statistical Data Analysis (DoE).  Knowledge of DCS and/or PLC control systems, I&C strategies, developing logic diagrams, PFDs and P&IDs.  Proven ability to prepare high-caliber technical manuscripts for publication in peer-reviewed journals.
    vsuc_fltilesrefresh_TrophyIcon Energy Engineering
    Sustainable Energy
    Engineering Simulation
    Energy
    Test Development
    Chemicals
    Chemistry
    JMP
    Chemical Engineering
    Sustainability
    Minitab
  • $50 hourly

    • 5.0/5
    • (5 jobs)
    Working and researching for more than 6 years in architectural design, architectural visualization, and energy-efficient buildings, I have designed climate-responsive energy-efficient buildings for clients by using key scientific principles, technologies, and analysis techniques for comfortable indoor environments while reducing energy use. The primary service in designing an energy-efficient climate-responsive building that I offer is: 1- Adapting architectural design to climate analysis 2- Energy demand analysis and interpretation by Testing various scenarios (glazing, insolation ..etc). 3-Cooling and heating system sizing according to the best scenario of energy demand. The secondary service that I offer as a Ph.D. student and researcher in architectural engineering : providing writing, editing, and research consultation primarily focused on the area of energy-efficient buildings through active and passive architectural strategies. The optional services that I used to work on : - Architectural modeling and rendering ( architectural visualization and photo matching) - Interior architectural design
    vsuc_fltilesrefresh_TrophyIcon Energy Engineering
    Architectural Rendering
    Energy Simulation
    Architectural Design
    EnergyPlus
    Building Energy Certification
    3D Modeling
    Interior Architecture
    3D Rendering
    Architecture Consultation
    Academic Writing
    Research Papers
  • $35 hourly

    • 4.7/5
    • (4 jobs)
    My name is Harris, and I am an experienced electrical engineer with a strong focus on solar energy system design. With over a decade of experience, I have developed solutions for markets across Europe, Australia, Africa, and the United States. I have hands-on experience overseeing the installation and commissioning of a 100 MW solar project at QA Solar Park Bahawalpur and have worked on several MW-scale solar projects in Kenya, Senegal, as well as solar projects in Ireland and Australia. Here are some of the key areas of my expertise: 🔷Utilizing software such as Sketchup for PV Arrays 🔷Conducting accurate system analysis using software tools such as Helioscope. 🔷Detailed shading analysis with software tools such as PVSyst to minimize energy loss 🔷Selecting BOS components, like inverters, charge controllers, and batteries 🔷Comprehensive system design using software tools like AutoCAD. 🔷Conducting LCOE analysis and financial analysis with PVsyst 🔷Load distribution schemes for off-grid system 🔷Cable Sizing using pro tools 🔷Voltage Drop Calculations 🔷LV Distribution in Large system 🔷Transformer selection 🔷Micro-inverter selection 🔷Loss Diagram 🔷Reactive Power Compensation system 🔷Performance Ratio(PR) Calculations 🔷SCADA System Design 🔷Pyranometers and irradiance monitoring system design 🔷Zero Export Controllers implementation and design 🔷PV-Diesel Controller Design for industries 🔷 Solar Permit Plan-set design 🔷 Quantity Surveying and BOM 🔷 Micro-grid designing 🔶In addition to my experience at QA Solar Park Bahawalpur, I have worked on numerous solar projects across Africa, including Kenya and Senegal. I have also been involved in solar projects in Ireland and Australia, where I have gained valuable knowledge and insights into the local markets and regulatory requirements. 🔶I use industry-standard software tools to create customized solutions that meet the unique requirements of each market. With my field experience and technical expertise, I am confident in my ability to design solar systems that are efficient, cost-effective, and profitable. As a passionate advocate for renewable energy, I believe that solar power is the key to a sustainable future. If you are looking for a skilled electrical engineer with expertise in solar energy system design for different markets, I would be honored to work with you. Let's collaborate and create a customized solution that meets your specific needs, maximizes performance, and minimizes costs. I look forward to the opportunity to work with you.
    vsuc_fltilesrefresh_TrophyIcon Energy Engineering
    Mining Engineering
    Sustainable Energy
    Solar Energy Simulation
    Aurora Solar
    PV Sizing
    Battery Sizing
    Solar Energy
    Helioscope
    Electrical Drawing
    Solar Design
    PVSyst
    Electrical Design
    Autodesk AutoCAD
    SketchUp
  • $40 hourly

    • 5.0/5
    • (16 jobs)
    Primarily I am a power systems engineer with about 7 years of experience in power distribution, power system protection and control. I later pivoted to renewable energy industry, particularly solar energy generation (please refer to specialized Energy Engineering profile) I am listing down my core competencies in power systems engineering below: • ARC flash studies, impact studies, protection studies including relay coordination in ETAP • Load Calculations, cable sizing and component selection for power distribution. • Single Line Diagrams, Three Line Diagrams, schematics. • Cable selection, routing/wiring layouts based on electrical engineering fundamentals considering inductances, capacitances and bend angles for effective routing in building works. • Distribution Switchgear design schematics LT/HT upto 33kV • Circuit breaker selection; Icu and short circuit calculations. • Relay coordination with hands on experience in IDMT, Impedance Impluse relays and residual current monitors for ground fault detection. • Selection of instrumentation and control components for power distribution (CTs, PTs, Impulse relays) and designing I&M circuits. • Star-Delta Starter calculations and circuit design for motor-control. • LUX calculations and Lighting design using DIALux.
    vsuc_fltilesrefresh_TrophyIcon Energy Engineering
    Electrical Design
    Electrical Layout Design
    Mechanical, Electrical & Plumbing Systems
    National Electrical Code
    PVSyst
    Electrical Engineering
    Altium Designer
    Aurora Solar
    ETAP
    CAD
    Autodesk AutoCAD
    AutoCAD Civil 3D
    SolidWorks
  • $150 hourly

    • 5.0/5
    • (35 jobs)
    I help manufacturers and equipment sales reps leverage technology to streamline sales processes and accelerate market growth.
    vsuc_fltilesrefresh_TrophyIcon Energy Engineering
    Mechanical Engineering
    Project Scheduling
    Construction Management
    HVAC System Design
    MEP Design
    Python
    BIM Consultation
    Autodesk BIM 360
    Mechanical Design
    BIM Implementation Plan
    Building Information Modeling
    C#
    Autodesk Revit
  • $25 hourly

    • 4.9/5
    • (17 jobs)
    With more than four years experience performing building energy efficiency research, my main skills are related with Building Information Modelling (BIM). I have sound knowledge modelling buildings and buildings' systems using DesignBuilder and EnergyPlus such as HVAC systems, passive systems, building materials, thermal comfort, etc. My achievements can be tracked by scientific articles and conference proceedings which are the main fruit of my work. For further references please visit my page at Research Gate. Please, do not hesitate to contact me if more information is needed.
    vsuc_fltilesrefresh_TrophyIcon Energy Engineering
    Construction Estimating
    Engineering Simulation
    CNC Programming
    Sustainable Design
    HVAC System Design
    Microsoft Excel
    Autodesk Inventor
  • Want to browse more freelancers?
    Sign up

How it works

1. Post a job (it’s free)

Tell us what you need. Provide as many details as possible, but don’t worry about getting it perfect.

2. Talent comes to you

Get qualified proposals within 24 hours, and meet the candidates you’re excited about. Hire as soon as you’re ready.

3. Collaborate easily

Use Upwork to chat or video call, share files, and track project progress right from the app.

4. Payment simplified

Receive invoices and make payments through Upwork. Only pay for work you authorize.

Trusted by

How do I hire a Energy Engineer on Upwork?

You can hire a Energy Engineer on Upwork in four simple steps:

  • Create a job post tailored to your Energy Engineer project scope. We’ll walk you through the process step by step.
  • Browse top Energy Engineer talent on Upwork and invite them to your project.
  • Once the proposals start flowing in, create a shortlist of top Energy Engineer profiles and interview.
  • Hire the right Energy Engineer for your project from Upwork, the world’s largest work marketplace.

At Upwork, we believe talent staffing should be easy.

How much does it cost to hire a Energy Engineer?

Rates charged by Energy Engineers on Upwork can vary with a number of factors including experience, location, and market conditions. See hourly rates for in-demand skills on Upwork.

Why hire a Energy Engineer on Upwork?

As the world’s work marketplace, we connect highly-skilled freelance Energy Engineers and businesses and help them build trusted, long-term relationships so they can achieve more together. Let us help you build the dream Energy Engineer team you need to succeed.

Can I hire a Energy Engineer within 24 hours on Upwork?

Depending on availability and the quality of your job post, it’s entirely possible to sign up for Upwork and receive Energy Engineer proposals within 24 hours of posting a job description.

Schedule a call

Looking to hire for long-term or full-time assignments? See how Full-time hiring on Upwork simplifies the process.