Save this Search
     

All JobsEngineering & ManufacturingHourly

 (290 results)  
Sort by:
  • Posted Date
Hourly
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: 17 minutes ago  |  Ends: 14d, 22h  |   0 Proposals
Hello Ink & Fiber, The product we're developing is a little unusual in that it is not apparel, it is a fabric cover for an outdoor product. It's similar in nature to a patio furniture cover, so it will need to be manufactured in a tough waterproof material with a large commercial zipper or ties. We are looking for someone to offer ideas on modifying the design for ease of manufacture based upon a sketch. After the design is solidified, we would like to see it as photorealistic as possible to be used in materials such as sell sheets and on a website. I realize most of your experience is in the apparel industry and I want to be sure we find the right match for this project so as to not waste both of our time. If you feel it is out of scope with your abilities, we would appreciate your honesty in that respect when deciding whether to accept the job or not. We look forward to hearing from you. Thanks! -Todd Miner
Category: Product Design       
Skills: Industrial Design, Textile Engineering       

d****dix
 [?]
Sign in to view client's details.
| d****dix
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 6h, 21m ago  |  Ends: 14d, 16h  |   4 Proposals
I'm searching for a native English speaker for editing/rewriting texts in English, i am looking for an editor for an academic paper written in English. Editors with experience in editing academic articles, especially papers in communication engineering, are preferred.
Category: Other - Engineering &...       

a****isr
 [?]
Sign in to view client's details.
| a****isr
|    Egypt
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 12h, 0m ago  |  Ends: 14d, 10h  |   7 Proposals
We are looking for a self motivated individual with 2-3 years experience in the facade engineering industry with an emphasis on glass and glazing and ACM panels. We need an individual that can produce shop drawings (complete sets or portions). AutoCad, Revit, and Inventor software. We will provide Acad standards and templates.
Category: Architecture       

E****ch6
 [?]
Sign in to view client's details.
| E****ch6
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 12h, 0m ago  |  Ends: 14d, 10h  |   12 Proposals
I am in need of an engineer that will be able to help me develop a prototype for a start up company. I am currently in the process of obtaining both an utility patent, and would like to eventually apply for a design patent for this product, with your help. This product will be manufactured with safe BPA-free plastics. Please respond to add with your payrate and availability. Thank you P
Category: Product Design       
Skills: Product Design, Product Development       

R****921
 [?]
Sign in to view client's details.
| R****921
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: 16h, 3m ago  |  Ends: 14d, 6h  |   5 Proposals
We are looking for an experienced electronics designer to help us finalize the design for our prototype. The design should be tailored for manufacturing purposes. The prototype is a bluetooth LE device with the ability to make sounds, track motion and communicate with a mobile phone . We have an example schematics and a high level design guide for the designer to follow and would prefer the designer to give us feedback on the choice of components. The deliverable will be eagle sch/brd files and a list of the components used. We will easily be able to take the eagle files and import them into sketchup.
Category: CAD       
Skills: 3D Modeling, Electronics, Bluetooth, SketchUp, Eagle       

c****ust
 [?]
Sign in to view client's details.
| c****ust
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 16h, 18m ago  |  Ends: 14d, 6h  |   2 Proposals
integrate an infrared thermometer into a dog walking harness (see puppia vest for an example) that gives a temp reading in intervals. When the dog temperature reaches a target temp the harness sends either a sms message to the owner or gives a signal through a small light on the harness that turns red (indicating the dog's temp has reached a dangerous temperature)
Category: Electrical       

A****K35
 [?]
Sign in to view client's details.
| A****K35
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 17h, 39m ago  |  Ends: 14d, 5h  |   3 Proposals
We are looking to transmit signal from external machine such as xbox, dvd player, apple tv to our television without the use of wires. This is not a request for a HDMI dongle like chromecast. We would mainly be interested in just the development of the prototype we we can then mass produce overseas. We have included an attachment detailing our goal.
Category: Contract Manufacturing       

d****kme
 [?]
Sign in to view client's details.
| d****kme
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: 18h, 32m ago  |  Ends: 2d, 5h  |   9 Proposals
I have an existing Catia V5 R21 CATproduct file that needs to be modified with removals and additions to be made to the model. The product is for an electronic circuit card housing. This is not a large job and I anticipate that it can be done in around 15 hours. I will collaborate via Skype and/or NetMeeting to explain and review the changes. The deliverable is an updated Catia V5 R21 CATproduct file.
Category: CAD       
Skills: 3D Modeling, CATIA       

c****ots
 [?]
Sign in to view client's details.
| c****ots
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 18h, 38m ago  |  Ends: 14d, 4h  |   3 Proposals
Create a circuit this is capable of doing division between two 5 bit unsigned integer numbers. Remember that given a fraction A/B, A is called the dividend and B is called the divisor. The result of the division is called the quotient. Your division circuit should be implemented using sequential logic and should complete the division within 6 clock cycles of receiving its input. Cant use only combinational logic I have the the testing circuit, implementation circuit and input circuit . need the division circuit to be completed and working with said circuit. must be done on logisim(  [obscured]  /logisim/) This has to be done within a 48hr time limit a bonus for completion on time.
Category: Other - Engineering &...       

O****337
 [?]
Sign in to view client's details.
| O****337
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 20h, 20m ago  |  Ends: 14d, 2h  |   0 Proposals
I am a single mother who is also disabled. My pipes are frozen as is my sewer and the seal on my toilet has broken. I am in great need of help with this issue and anyone who believes they could be of service can contact me email at   [obscured]  
Category: Other - Engineering &...       

c****row
 [?]
Sign in to view client's details.
| c****row
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 22h, 16m ago  |  Ends: 14d, 0h  |   6 Proposals
We have a design and are looking for professionals to develop a prototype for manufacturing. The device will used for communications by campus personnel during crisis or emergency. The device will connect through WiFi to other devices and central server.
Category: CAD       

S****afe
 [?]
Sign in to view client's details.
| S****afe
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: 22h, 48m ago  |  Ends: 104d, 21h  |   3 Proposals
I'm looking for someone who can put plastic materials together that can glow in the dark at night and keep it's same color in the day time. The project is simple but I need them to sign a non-disclosure agreement.
Category: Other - Engineering &...       

b****910
 [?]
Sign in to view client's details.
| b****910
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 28, 2015  |  Ends: 13d, 18h  |   1 Proposal
A am planning to launch a new series of Parka. I already have the design of my product. I need someone to look for manufacturers in Europe and to find me one, ready to produce a prototype for me. I expect the cost to be less than 100 euros, including all materials. Best Regards, Sébastien
Category: Other - Engineering &...       
Skills: Manufacturing       

s****ume
 [?]
Sign in to view client's details.
| s****ume
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 28, 2015  |  Ends: 13d, 16h  |   9 Proposals
CFD analysis or rotating disk atomizer.We need to find the speed of the disk for a optimized water droplet size to be generated.It would involve modelling and cfd analysis of a rotary atomizer.
Category: Mechanical       
Skills: ANSYS, cfd, openfoam       

p****jan
 [?]
Sign in to view client's details.
| p****jan
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 28, 2015  |  Ends: 13d, 16h  |   1 Proposal
I recently downloaded Fusion 360 and am looking for a tutor that I can pay hourly to train me via google hangouts or skype. You will need to be fluent in English and speak clearly. I would like to get up to speed quickly. I am located in the Eastern Time Zone so you should be able to work during these hours. I have no rendering or modeling experience. Please send your hourly wage along with your schedule and google hangouts/skype info.
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD, fusion 360       

c****913
 [?]
Sign in to view client's details.
| c****913
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Feb 27, 2015  |  Ends: 13d, 7h  |   36 Proposals
Please provide general pricing and current availability for an AutoCAD (or related software) project that should take 1 to 2 weeks. Our company has an office in Southampton, PA and is looking to hire a professional to assist with an process control panel CAD project. Should we reach a general agreement I will have our personnel in Southampton contact you directly with additional parameters. Thank you, Eric Vangellow
Category: CAD       
Skills: AutoCAD, 2D Design, CAD/AutoCAD       

m****mod
 [?]
Sign in to view client's details.
| m****mod
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 27, 2015  |  Ends: 13d, 7h  |   20 Proposals
I have already designed and created a keychain, but no longer have access to the drawings, so I am looking for a CAD designer to take my current product, which is 2D, and put it into a CAD drawing with measurements so that I can take it to other/new machine shops. I will have at least 2 more similar keychains to do as well. I have all three physically produced, and could send pictures with some dimensions to aid in the drawing process, I just do not have the abilities/software to create this myself. As I stated before, these are largely 2D, but there are parts of them that require the machine shop to taper the item (produced from stainless steel, 1/8" thick) on a grinder. But I do not think that this would be required in the drawings, as it is not able to be included on a waterjet or laserjet machine. Please contact me if you feel you can assist me with my drawings, I will require some sort of NDA to protect my ideas. Thanks for reading, thanks for you time Garrett(ID: 69...
Category: Product Design       
Skills: 3D Design, 2D Design       

g****ens
 [?]
Sign in to view client's details.
| g****ens
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 3-4 weeks  |  Posted: Feb 27, 2015  |  Ends: 13d, 6h  |   13 Proposals
We are seeking a designer to help us through the concept ideation, sketching, and CAD design for a prototype of a new consumer cosmetics good.
Category: Product Design       

r****ld3
 [?]
Sign in to view client's details.
| r****ld3
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 27, 2015  |  Ends: 13d, 6h  |   2 Proposals
We are a company that installs wifi networks for large buildings. We have a circumstance in a large building where we have an extremely high 2.4GHz interference. We are looking for someone who can help identify the sources of interference and possible solutions to attenuate the interference such as shielding. We have a Wi-Spy 2.4/5GHz Spectrum Analyzer and have taken recordings at different parts of the building specifically next to floors and rooms that contain large motors for water pumps and elevators. We are looking for someone with experience in identifying sources of interference. Please let me know if this is something you can help with. We need to begin working on this project immediately and would like to set up a meeting to discuss next steps. Please include hourly rate in your bids. Also include schedule of availability. Thank you and looking forward for you bids.
Category: Other - Engineering &...       
Skills: 3D Modeling, Manufacturing Design       
Preferred Location: North America, Western Europe, Eastern Europe, Eastern Asia, Australia/Oceania

o****ant
 [?]
Sign in to view client's details.
| o****ant
|    Hungary
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Feb 27, 2015  |  Ends: 13d, 6h  |   0 Proposals
I need someone to help me do some VBA work using Excel to communicate to a power supply/tester through USB using an Agilent add-on for USB communication. We have started a crude version but need more resources to make it work on a small 10" touchscreen. There will need to be ability to scan in a part number to pull in test information from a test database.
Category: Electrical       
Preferred Location: United States

a****ler
 [?]
Sign in to view client's details.
| a****ler
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 27, 2015  |  Ends: 13d, 3h  |   4 Proposals
Design a off road hand cycle that can be used by physically athletes that improves over today's current models. (and there are not many) This is in support of a charity that provides these bikes to disabled individuals with a concentration on military personnel
Category: Product Design       

a****ski
 [?]
Sign in to view client's details.
| a****ski
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 27, 2015  |  Ends: 13d, 3h  |   2 Proposals
I'm looking for an experienced pattern-maker and seamstress to construct patterns and production ready garments from sketches. I need someone who can produce made-to-order garments with no minimums. You must have a good eye for fashion and a good understanding of high quality garment construction and fit. I need someone who has experience with Contemporary Women's Wear. I also need someone who is versatile with woven and knit fabrics. You must understand on how to construct with knit fabrics and have the proper machinery. Please look through my portfolio of the designs that have been produced so you have an idea of the garments that my company produces.
Category: Contract Manufacturing       
Skills: patternmaker, seamstress       

S****tta
 [?]
Sign in to view client's details.
| S****tta
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 27, 2015  |  Ends: 13d, 3h  |   5 Proposals
We need to have a foundation designed for a house that is to be moved and rebuilt at 2117 holmes st in dallas. we are going to move the existing frame house, built 1920, to this location and set it atop a new pier foundation we will prepare there. i'd like to use sonatube piers on a concrete base at grade and use generalized local geographic information for soil profiling.
Category: Civil & Structural       

m****nek
 [?]
Sign in to view client's details.
| m****nek
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job