Save this Search
     
Sort by:
  • Posted Date
Hourly Rate: $15 - $20 / hr   |  Duration: 7-9 months  |  Posted: 2h, 21m ago  |  Ends: 14d, 21h  |   6 Proposals
mostly reverse engineering mechnical parts -- also just taking old prints and turning them into really well noted 2d prints i would really like everything to be done in solidworks -- just to have one software being used -- also i own solidworks - not pro e and others glenn
Category: CAD       
Skills: 3D, 3D Design       

g****mar
 [?]
Sign in to view client's details.
| g****mar
|    United States
Fixed Price: Not Sure   |  Posted: 2h, 22m ago  |  Ends: 2d, 21h  |   1 Proposal
Input 16 bit digital word, updated no more often then once per us. NON-ISOLATED OUTPUT Impedance: 50 ohm Amplitude 20 Vpp into 500 or greater ohm load, 20 mA 1mV step size maximum Short Circuit protected Resolution 1mV steps up to pulse amplitudes <= +/- 2000mV p-p 10mV steps for pulse amplitudes > +/- 2000mV p-p Amplitude Accuracy (Error) 0.1% + 0.1 mV of setting in ambient of 5 deg C Slew Rate 20V / us Rise /Fall time (square waves) <100nS Offset Range 0 to +/- 10V Offset Accuracy (Error) 2% +0.2mV of setting Noise <1mVrms 10Hz to 100kHz or better ISOLATED OUTPUT Type Output isolated from ground by transformer or optical components Rating 1500Vrms, >100MegOhms, Better than 50pF @ 100Hz Output converted to constant current if requested: 200Vp-p maximum 1V/V 10V/V 100V/V 100mA maximum 1uA/V 10uA/V 100uA/V 1mA/V 10mA/V Sufficient power (40W
Category: Electrical       

I****eth
 [?]
Sign in to view client's details.
| I****eth
|    United States
Fixed Price: Not Sure   |  Posted: 2h, 56m ago  |  Ends: 14d, 21h  |   2 Proposals
We would like to design and manufacture a diesel monitor for marine diesel engines. The unit should monitor the amount of fuel been used. With a display the unit would show litres per hour used and total consumption. We also like to include the possabilty to be able to email results to an address. Also if we could incorporate live monitoring also?. The unit needs to be cost effective for small boats to buy. There is already plenty of expensive models on the market.
Category: Product Design       

t****sky
 [?]
Sign in to view client's details.
| t****sky
|    Ireland
Fixed Price: Less than $500   |  Posted: 5h, 9m ago  |  Ends: 6d, 18h  |   1 Proposal
I need some one who can made an electronic circuit which can produce different kind of low frequency like I need an Ultrasonic blast gun asap.
Category: Electrical       

p****war
 [?]
Sign in to view client's details.
| p****war
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 7h, 21m ago  |  Ends: 14d, 16h  |   6 Proposals
Unique LED lighting system involving product design of housing components, and some simple electronics. Project also needs to be developed for manufacturing, which may include rapid prototyping and injection molding.
Category: Product Design       

k****ens
 [?]
Sign in to view client's details.
| k****ens
|    United States
Fixed Price: $3,000 - $13,000   |  Posted: 7h, 38m ago  |  Ends: 14d, 16h  |   1 Proposal
New bootstrapping startup is developing a diving industry device that requires un-tethering from the primary power source. We need a handheld trigger throttle with start-stop-hold functions. Must be able to perform at 80ft depth from hull mounted receiver as well as above water 80ft unobstructed distance. Please submit resume if you have direct and tangible experience with design, production and system integration of comparable equipment. Compensation negotiable, timeline immediate. Location: Del Mar, CA On site desk available,
Category: Electrical       

d****rra
 [?]
Sign in to view client's details.
| d****rra
|    United States
Fixed Price: Less than $500   |  Posted: 8h, 7m ago  |  Ends: 14d, 15h  |   10 Proposals
I require a CAD/CAM designer that will design toy car models from a suitable 5mm plywood materials. The car will have freely moving wheels which will be attached to a motor and a battery. The drawing will be cut using a CNC laser machine and the software is TECHSOFT 2D DESIGN so they'll need to be compatible. The machine has a Red line for engraving and a black line to cut. This job is for the completion of one car model. The project has 4 phases: CAD stage, wheel stage, animation stage and sticker stage. At each stage there will be a thorough assessment of the work and I the successful designer must be willing to produce several drafts until the perfect model is produced. I need time and thought put into this project . Attached is a document explaining the project in greater detail.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

w****ces
 [?]
Sign in to view client's details.
| w****ces *
|    United Kingdom
Fixed Price: $60 or less   |  Posted: 8h, 45m ago  |  Ends: 6d, 15h  |   15 Proposals
Need small job drafted into autocad as shop drawing for use in building. i have taken measurements of what is required to draft and photos with supporting information you need only input to autocad. structure is small canopy and iron railing.
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       
Preferred Location: United States

a****ura
 [?]
Sign in to view client's details.
| a****ura
|    United States
Fixed Price: Not Sure   |  Posted: 8h, 52m ago  |  Ends: 14d, 15h  |   4 Proposals
This is a tactical military dog vest that will be fitted with 3 cameras and multiple sensors. I need 3 different CAD drawings including: Wiring diagram - internal within the vest, pocket diagrams - holding all of the equipment to include the wiring harness, final version of the vest completed. Once chosen and NDA will be signed and the rest of the parameters will be sent out. This work needs to be completed by May 5th all versions. If interested please contact me. Thanks, Dave
Category: Product Design       

M****TEQ
 [?]
Sign in to view client's details.
| M****TEQ
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 9h, 1m ago  |  Ends: 14d, 14h  |   1 Proposal
- Customer interaction - Making database and interacting with customers - Customer Requirement identification - Customer Presentation & Customer visit - Co-ordination with Presales, Financial team, Technical team & customer to prepare the final RFX & decks - Supporting sales for decks, RFI, & Proposals - Hot listing of logo (Logo Finalization) - Coordinating for Effort estimation & Rate card - Coordination for partnership registration. - CXO level deck preparation. - Building case examples with delivery and technical support - Cross team coordination for meeting various business needs - Client Follow-up - Intra team follow-ups
Category: Product Design       

p****886
 [?]
Sign in to view client's details.
| p****886
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 9h, 24m ago  |  Ends: 14d, 14h  |   17 Proposals
I am working on a product design project and need the assistance of a CAD engineer to model my design and wondered when you could have it done for as I am working to a tight deadline and need it done very soon! It is a rescue aid for beach lifeguards I don`t think it will take a professional very long Thankyou Joseph
Category: CAD       
Skills: 3D Design       

j****ugh
 [?]
Sign in to view client's details.
| j****ugh
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 12h, 34m ago  |  Ends: 14d, 11h  |   5 Proposals
Hello! A time ago I made a new gamig keypad, now we are working with that to get it to the kickstarter. I will add some pic from prototype and some screeches how we see it at the end. Now we need to make industrial desing, what we can us for Injection Molding and start production.
Category: Product Design       

p****hoo
 [?]
Sign in to view client's details.
| p****hoo
|    Latvia
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: 15h, 0m ago  |  Ends: 14d, 8h  |   4 Proposals
looking for DESIGN FOR THE MECHANICAL, ELECTRICAL, AND PLUMBING (MEP) ENGINEERING Budget is less, time and budget is tight, please reply if you are familiar with required skill and expertise. software REVITS 2013-14
Category: CAD       

j****123
 [?]
Sign in to view client's details.
| j****123 *
|    India
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 15h, 51m ago  |  Ends: 14d, 8h  |   11 Proposals
Hi, We are a fabrication shop in Australia and currently in need of a good Structural Detailer who can do our jobs in ongoing basis... Send a sample work of yours with job proposal. Currently I am going to need drawings for a simple 60'x100' building and will provide the detail to selected candidates for payment discussion. We will be accepting both AutoCAD and Tekla Structure format so feel free. Regards
Category: CAD       
Skills: AutoCAD, tekla strctures       

r****kat
 [?]
Sign in to view client's details.
| r****kat
|    Bangladesh
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 16h, 59m ago  |  Ends: 14d, 7h  |   16 Proposals
I have a PCB design using bluetooth created in Altium. I would like a second set of eyes to look over the design and make changes to improve it. NDA is needed.
Category: Electrical       

r****jam
 [?]
Sign in to view client's details.
| r****jam
|    United States
Fixed Price: Not Sure   |  Posted: 17h, 47m ago  |  Ends: 14d, 6h  |   9 Proposals
a universal security device that fastens onto a nut or a bolt in order to prevent theft of ANY type of aftermarket product regardless of material, length or size. it is a cylinder shape with a flat top and bottom. it has a hole running through the center and a hex cut out that is deep enough to insert the hex bolt head. it can be slid onto a bolt like a washer and the bolt ends up being flush with the top of the LockBolt. the steep tapered sides makes it impossible to grip the bolt with pliers or damage it with a hacksaw. this LockBolt can go on a nut and/or bolt of any size, length, or material. a specific design is on the top of the LockBolt that requires a key to tighten and loosen the nut and bolt from a part. i have attached images to give an idea of the route i'm trying to go with the LockBolt. these safety bolts are only one size nor high strength enough to protect and secure suspension parts of privately owned race cars, desert trucks, motorcycles and other vehicles.(ID: 55...
Category: CAD       
Skills: Mechanical Design, cnc, machining       

D****986
 [?]
Sign in to view client's details.
| D****986
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 23h, 0m ago  |  Ends: 14d, 0h  |   4 Proposals
I'm looking for a manufacturer to manufacture a small number of prototypes for a backpack design. Technical specifications have already been prepared. The only tasks needed now are: * Determine feasibility of manufacturing prototype based on technical specifications * Identifying potential suppliers and manufacturers willing to work on producing a small number of prototypes * Manufacture prototype
Category: Product Design       
Skills: Manufacturing Design       

j****ran
 [?]
Sign in to view client's details.
| j****ran
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: Apr 17, 2014  |  Ends: 13d, 22h  |   27 Proposals
? Ability to read, analyzes, and interprets blueprints ? Organization/time management skills ? Ability to work independently as well as part of a team, good attention to detail ? Ability to meet deadlines and recognize discrepancies ? General understanding of electrical system drawings ? Knowledge of basic AutoCAD skills ? Capable of reading 2D plans, electronically or hard copy ? Working knowledge of 3D layout and design
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

h****ton
 [?]
Sign in to view client's details.
| h****ton
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 17, 2014  |  Ends: 1d, 21h  |   18 Proposals
I am in need of a designer, either a mechanical engineer, industrial designer or a CAD experienced professional We have built the proof of concept and we have a requirements document as well as information regarding our target market which might help in the design process. The right person for the job will be able to enhance our proof of concept with purposeful design, to take a proof on concept into the prototype phase, with the goal being a design and spec package which is a biddable set of documents for manufacturers. I expect the work to take between up to 15 hours, although that could change as the scope of the project develops. The right person doesn't need to be in Maryland.
Category: Product Design       
Preferred Location: United States

p****ter
 [?]
Sign in to view client's details.
| p****ter
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 17, 2014  |  Ends: 13d, 21h  |   29 Proposals
My name is Allen, I am searching for someone who could assist me with my invention idea. I completed a provisional patent and it has been accepted. I need for someone to help me with a (2-D and 3D-CAD) drawings and images. After the completion of the (2-D & 3D-CAD), I will need a Prototype for my invention. Currently I do not have my NON Disclosure Agreement available at the moment. However, I can be reached at 732-213-0870 for more details. I look forward to hearing from someone soon!! P.S. I am pursuing this project with very limited resources.Therefore,reasonable prices is what I am searching for as well.
Category: CAD       
Skills: AutoCAD, SolidWorks       

w****as4
 [?]
Sign in to view client's details.
| w****as4
|    United States
Fixed Price: Not Sure   |  Posted: Apr 17, 2014  |  Ends: 13d, 21h  |   0 Proposals
Looking to have a site with a landing page opt-in builder that works along with aweber and getresponce. This will not use the form from aweber or getresponce but the html script for the campaign can be put into the builder for custom forms with in the landing page builder that people have to sign up and be a member to use free. Must know what you are doing. I don't want bugs forever on this thing.
Category: Product Design       
Skills: Application Programming, AWeber       

s****la2
 [?]
Sign in to view client's details.
| s****la2
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job