Save this Search
     
Sort by:
  • Posted Date
Mechanical
Fixed Price: Less than $500   |  Posted: 6h, 53m ago  |  Ends: 14d, 17h  |   7 Proposals
Hello, The project is modifying and adapting a reduction gearbox to our prototype device in the medical field. It is a standalone gearbox of about 12mm overall dimension, yet without the DC motor. The gear ratio is estimated at 10:1 and we would need both input and output shafts. Also, ideally both input and output shaft will originate from the center of the gearbox or close to it. Note: these are common gearbox with typical size of 12 x 10 x 9-12.5 mm similar to this:   [obscured]  /product-detail/gearbox-dc-motor-12mm-electric-door_1644023247.html Are you interested?
Category: Mechanical       

h****arb
 [?]
Sign in to view client's details.
| h****arb
|    United States
Fixed Price: Less than $500   |  Posted: 7h, 17m ago  |  Ends: 14d, 16h  |   2 Proposals
I already have a finalized tech pack of a very specific shirt design and I need to now produce samples using different variations of fabrics until I arrive at the ideal product. This is a shirt for adventure. Fabrics used will be nylon & spandex blended together (92% nylon / 8% spandex) and I will use micro nylon rip stop for the yoke of the shirt. Cargo and zippered pockets are an essential part of the design. There is a vented mesh on the back pleat of the shirt. While the aesthetics of the shirt are vital, the most essential part is the technical elements of the shirt. The pockets and the quality of sewing are of upmost importance. This is designed for the outdoors, not to make a fashion statement. Please only contact me if you have experience with active wear and sowing with nylon fabrics. Thanks and look forward to finding the right candidate for this job.
Category: Product Design       

w****isz
 [?]
Sign in to view client's details.
| w****isz
|    United States
Hourly Rate: $50 - $75 / hr   |  Duration: Not Sure  |  Posted: 9h, 20m ago  |  Ends: 14d, 14h  |   17 Proposals
Detail structural or component shop drawings ? general minor but also redline as built drawings for general mechanical work.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       

S****ing
 [?]
Sign in to view client's details.
| S****ing
|    United States
Hourly Rate: $50 - $75 / hr   |  Duration: Not Sure  |  Posted: 10h, 33m ago  |  Ends: 14d, 13h  |   10 Proposals
Detail structural or component shop drawings ? general minor but also redline as built drawings for general mechanical work.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       

S****ing
 [?]
Sign in to view client's details.
| S****ing
|    United States
Fixed Price: Less than $500   |  Posted: 12h, 6m ago  |  Ends: 14d, 11h  |   6 Proposals
Hello, I'm looking to create an electronic TV Box from scratch and require help with anyone in the industry to assist with building the BOM and Gerber files for the build so I can provide to a PCB manufacturer in China. Brief high level list of component are below: Amlogic S802 - Quad Core A9 CPU Amlogic S802 - Mali-450 Octocore GPU Broadcom 5G Wi-Fi chipset Memory: 4GB DDR3 Storage: 16GB Flash Storage Wifi: Broadcom 5G 802.11 Dual Band Ethernet Port: 10/100/1000 Full Duplex Port USB: 4.0 Low Power, full speed Bluetooth - Bluetooth V4.0 Mouse/ Keyboard Support Card reader: SD/SDHC/MMC cards OS: Linux or Android Front Display: Time/Clock, Power Button LED - Red - ON / Blue - Off, Wifi/Ethernet LED All work required to produce the board in a functional manner is needed from this job. Thank you, Dan
Category: Product Design       

d****dzc
 [?]
Sign in to view client's details.
| d****dzc
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 14h, 4m ago  |  Ends: 14d, 9h  |   0 Proposals
We wish to have a thermal test done on our new lighting collection "Crisp". Here are the parameters: Test range of ambient temperatures -Warm (20-45 C / 68-113 F) -At 5 C increments Material and Product specs included in Package - Light engine spec sheet, , assembly materials) - thermal paste Test with Gypsum Drywall & Junction Box in worst condition (upside down already positioned in SolidWorks Assembly-Materials have been assigned to part files - Use "CP-CFM Crisp with mount thermal rO" for testing) Deliverables -Cut away section views of complete assembly w thermal shading at each 5C increment -Specific point temperatures indicated at IC, LED, and hottest point on assembly Assumptions -Typical convective air flow (no wind etc) Timelines - Testing completed for Firday July 3, 2015 - Monday July 6,2015
Category: Mechanical       

T****RBW
 [?]
Sign in to view client's details.
| T****RBW
|    United States
Fixed Price: $100 - $150   |  Posted: 14h, 31m ago  |  Ends: 14d, 9h  |   11 Proposals
We have a requirement for a freelancer to create a PCB Layout for a development board. We have a schematic and a design file in RS-Online's PCB software "DesignSpark". The PCB Layout can be created in DesignSpark or Eagle and it must be to a manufacture's standard so that we can have it made. It must have all masks, screens etc. The Board is to be 2 layer. We have a PCB file already which needs someone with experience in PCB design and layout to look at it and improve it.
Category: CAD       
Preferred Location: Western Europe, Eastern Europe, India/Southern Asia, Eastern Asia

U****ies
 [?]
Sign in to view client's details.
| U****ies
|    United Kingdom
Fixed Price: Less than $500   |  Posted: 14h, 44m ago  |  Ends: 14d, 9h  |   10 Proposals
I need help with the Heat Transfer and i need experts that understand the book that is attached here. The detailed work will be provided, please let me know your email address. Thanks
Category: Mechanical       
Skills: Mechanical Engineering       

d****705
 [?]
Sign in to view client's details.
| d****705
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 15h, 9m ago  |  Ends: 14d, 8h  |   16 Proposals
Design of a mechanical component that will be part of a product. Prototyping and testing are required to ensure that the component will withstand cyclical stress. Please note that an NDA form should be signed prior to starting work. Kindly contact me by phone or email for further details: email:   [obscured]  
Category: Product Design       

n****abr
 [?]
Sign in to view client's details.
| n****abr
|    United Arab Emirates
Fixed Price: Not Sure   |  Posted: 21h, 59m ago  |  Ends: 14d, 2h  |   6 Proposals
Need a person to use Equest, Trane Tracer or any other HVAC energy analyzer softwares and create energy saving calculations for me. I sell efficient chillers, I'd like to approach buildings and design engineers with an estimated energy savings. This person would need to simulate the building load based on square footage, occupancy, floors, monthly electric bill, and existing chiller. Then build a load profile and compare against my chiller performance data to create an estimate on energy savings I can present to my customer. Please let me know if you have experience doing this. Thanks, Josh
Category: Mechanical       

j****14u
 [?]
Sign in to view client's details.
| j****14u
|    United States
Fixed Price: Not Sure   |  Posted: 22h, 3m ago  |  Ends: 14d, 1h  |   2 Proposals
Need a person to use Equest, Trane Tracer or any other HVAC energy analyzer softwares and create energy saving calculations for me. I sell efficient chillers, I'd like to approach buildings and design engineers with an estimated energy savings. This person would need to simulate the building load based on square footage, occupancy, floors, monthly electric bill, and existing chiller. Then build a load profile and compare against my chiller performance data to create an estimate on energy savings I can present to my customer. Please let me know if you have experience doing this. Thanks, Josh
Category: Mechanical       

j****14u
 [?]
Sign in to view client's details.
| j****14u
|    United States
Fixed Price: Not Sure   |  Posted: 22h, 7m ago  |  Ends: 14d, 1h  |   1 Proposal
Need a guy to use EnergyPlus, Trane Tracer or any other HVAC energy analyzer softwares and create energy saving calculations for me. I sell efficient chillers, I'd like to approach buildings and design engineers with an estimated energy savings. This person would need to simulate the building load based on square footage, occupancy, floors, monthly electric bill, and existing chiller. Then build a load profile and compare against my chiller performance data to create an estimate on energy savings I can present to my customer. Please let me know if you have experience doing this. Thanks, Josh
Category: Mechanical       

j****14u
 [?]
Sign in to view client's details.
| j****14u
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Jun 29, 2015  |  Ends: 13d, 21h  |   21 Proposals
We are looking to meet and build a long term relationship with an experienced agent, with years of sourcing products from China, Taiwan, and India. Looking forward to hearing from you.
Category: Product Design       

M****e-M
 [?]
Sign in to view client's details.
| M****e-M
|    United States
Fixed Price: Not Sure   |  Posted: Jun 29, 2015  |  Ends: 13d, 20h  |   0 Proposals
Requirements Design and deliver Design Package which includes the following features: Three Capacitive Sense button configurations suitable for interfacing to an Atmel D2x controller 3 Buttons - 1 x 3 6 Buttons - 2 x 3 1 Button -1 x 1 An ambient light sensor with an I2C interface RGB uniform backlight with separate CMOS level control for each button Minimal number for orderable part numbers Input Deliverables from GOT Interface 6-Button 2D Drawing ( GOT Interface 6 Button.pdf) 3- Button 2D Drawing ( GOT Interface 3 Button.pdf) Image of all three Button Configurations (Custom Cap Touch 2.jpg) RGB LED Specification sheets (XZMDKDGCBD56W.pdf) Ambient Light Sensor Specification sheet (TSL45315) Output Deliverables to GOT Interface Design Package CapSense Circuit Schematics, Gerber files, Fabrication Drawing and Assembly Drawing. LED Circuit Schematics, Gerber files, Fabrication Drawing and Assembly Drawing. Light Guide Film 2D Drawings and 3D Drawings Zemax of other r...
Category: Product Design       

d****iba
 [?]
Sign in to view client's details.
| d****iba
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 29, 2015  |  Ends: 13d, 20h  |   36 Proposals
HI all, I need 3 drawings completed for 3 electrical cabinets we are having built. Done in cad or illustrator or whatever. Just need to clearly communicate to overseas manufacturer. Attached is something similar used previously for another company. Attached also are photos. First cabinet: battery cabinet 1200 high x 600w x 350 d with 3 internal shelves to support max 75kg per shelf (total 4 batteries stored inside) (for indoor and outdoor installation) (2 x 32mm hole punched in each end of shelves) Air vents covered with vermin mesh (front bottom & back wall high) on skids for indoor and outdoor installation (silver colour paint finish) Second cabinet: battery cabinet 900 high x 1200 wide x 600 deep with 3 internal shelves to support max 400kg per shelf 2 x 32mm hole punched in each end of shelves (total 4 levels of batteries inside) (is it possible for all shelves to be removable?) (on skids for indoor and outdoor installation) Air vents covered with vermin mesh ...
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

h****ory
 [?]
Sign in to view client's details.
| h****ory
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 29, 2015  |  Ends: 13d, 16h  |   9 Proposals
Looking for a local industrial engineer to help us finalize a mold. We have version 1 of the mold complete and want to move to version 2 immediately. Located in Boca Raton.
Category: Product Design       
Skills: AutoCAD, 3D Systems       

H****Max
 [?]
Sign in to view client's details.
| H****Max
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 29, 2015  |  Ends: 13d, 13h  |   1 Proposal
My company is looking to expand into the fashion market. Currently, we are looking for a professional fashion designer to create the latest designs that can will turn heads in the market. We have a full team behind you!!!!
Category: Product Design       

S****rry
 [?]
Sign in to view client's details.
| S****rry
|    United States
Fixed Price: Not Sure   |  Posted: Jun 29, 2015  |  Ends: 13d, 12h  |   10 Proposals
looking for someone with experience with 3D CAD, but that has created molds for PVC plastics. our product is flexible and we need to find out best way to create the mold so as to make it work with certain types of manufacturing process'. please be local in new york city.
Category: Product Design       
Preferred Location: United States

d****lla
 [?]
Sign in to view client's details.
| d****lla
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 29, 2015  |  Ends: 1d, 12h  |   18 Proposals
We are looking for someone to design, draft 3d photos, cad cam design for a fully operational innovative mechanical water pick for teeth. Due to the sensitivity and proprietary nature of the product design - a more detailed summary will be supplied to chosen elancer. Please submit your proposal and hourly rate for this project.
Category: Product Design       

b****ich
 [?]
Sign in to view client's details.
| b****ich
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Jun 29, 2015  |  Ends: 13d, 11h  |   3 Proposals
I am looking for someone to create sports wear for me from designs and fabrics selected by me. You will be sent designs, colours and fabrics, from this you need to be able to put them into a product.
Category: Product Design       
Skills: Manufacturing, Textile Engineering       

L****FiT
 [?]
Sign in to view client's details.
| L****FiT
|    United Kingdom
Fixed Price: $20 - $75   |  Posted: Jun 29, 2015  |  Ends: 5d, 11h  |   7 Proposals
I am looking for a complete design of a mobile Espresso Bar. After your design the carpenter will build the final product. WORK - PRODUCT A Mobile Espresso Bar (see attached pictures) Basis of the mobile espresso bar should be 1. a 1260x790mm kitchen island and needs to be adapted to it needs (for example an ikea stenstorp kitchen island). OR 2. Draw an own model This semifinished product has to be finished to a Mobile Espresso Bar. It should provide space for: Above Countertop :: Coffee Mashine (600x600x700mm (Width/Depth/Height)) :: Grinder :: Countertop Lid, straw and Condiment Organizers :: All kind of holes for supply (electric, water, waste etc) :: Refridgerator for cold drinks and/or take away cake/sandwiches smoothies :: a space where a customer can prepare his coffee, example to finish with sugar, stir and put a top on the cup. :: A space where the customer can drink the coffee. Can be made with one of the sideparts (see closing) :: any input or ideas will be great Belo...
Category: CAD       
Skills: 3D, 3D Modeling, AutoCAD, Manufacturing Design       

w****nfo
 [?]
Sign in to view client's details.
| w****nfo
|    Austria
Fixed Price: $500 - $1,000   |  Posted: Jun 29, 2015  |  Ends: 13d, 10h  |   14 Proposals
I'm wanting to design a desk that has an articulating arm for a specific use. I'm looking for the design to be done and payment to be paid in % of the company. I have pitched this product to Walmart and Staples. Both are receptive. I need this design to complete my patent application.
Category: Mechanical       

s****r96
 [?]
Sign in to view client's details.
| s****r96
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: Jun 29, 2015  |  Ends: 13d, 9h  |   8 Proposals
We are working on a house plan, I need to adjust the floor plan as needed to accommodate HVAC supply and return lines and chases. I would like all ducting to be inside the insulated envelope. I would like the following: 1. Analyze the floor plan 2. Draw the supply and return lines 3. Suggest chase placement. The floor plan could be provided in DWG format, Chieft architect is preferred. International applicants must have experience with US HVAC standards. Please do not apply if you don't meet this requirement.
Category: Mechanical       
Skills: AutoCAD, SolidWorks, Mechanical Engineering       
Preferred Location: United States

f****r25
 [?]
Sign in to view client's details.
| f****r25
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job