Save this Search
     
Sort by:
  • Posted Date
Posted: Within 24 hours
Fixed Price: $200 or less   |  Posted: 17 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
I have a job which I need to design a layout for 1x (56 m2)apartment , which we will use to put 4 next to each other.(same model repetition) I will also need a modern looking facade, because they are square boxes. The modern facade will need to be good for the block of square trailers put next to each other. I have attached some info regarding this simple job, if you can illustrate how the facade will look would also be good.
Category: Architecture       
Skills: 3D Modeling, ArchiCAD, Architecture       

k****ier
 [?]
Sign in to view client's details.
| k****ier
|    Aruba
Fixed Price: Not Sure   |  Posted: 43 minutes ago  |  Ends: 89d, 23h  |   0 Proposals
I'm launching a new brand of pomade, the men's hair styling product and would like to formulate a new recipe of pomade which is stable, and able to compete with the reputable pomade brands in the current market. Freelancer may required a well understanding and knowledge on pomade and its history. I required 3 recipes and they shall be: First recipe: - stable and practical recipe - water based pomade (water soluble) - medium to strong holding power - low-medium shine - easy to style and recomb-able - easy to wash off with water - unique selling point: healthy for hair/ hair growth (at least safe for hair and scalp) - color and scent to be decided (flexibility) Second recipe: - stable and practical recipe - water based pomade (water soluble) - extra strong holding power - high shine - easy to style recomb-able - easy to wash off with water - unique selling point: healthy for hair/ hair growth (at least safe for hair and scalp) - color and scent to be decided (flexibility) Third recip...
Category: Chemical Engineering       
Skills: Chemical Engineering       

a****kam
 [?]
Sign in to view client's details.
| a****kam
|    Malaysia
Fixed Price: Less than $500   |  Posted: 1h, 16m ago  |  Ends: 14d, 22h  |   1 Proposal
Hello, My name is yoav Kan-Tor, I am one of the Co-Founders of Night-Sense. A medical device company we would like to create a mock up of our device using 3D printing. The attached .stl file is a draft for our watch like device. We would like to 3D print with the following specifications: The wrist band should be flexible. The sensor pad and watch unit should be hard. The watch should be usable meaning one could wear it. Open it put it on his arm and close it. Additional names should be engraved into the device. We are looking for someone to correct the attached design, and create 3d printing files of the new design so we could go and print in a local printer. We have available 123design (software) files if required.
Category: 3D Modelling       
Skills: 3D, 3D Printing       

y****vkt
 [?]
Sign in to view client's details.
| y****vkt
|    Israel
Fixed Price: Less than $500   |  Posted: 1h, 21m ago  |  Ends: 14d, 22h  |   2 Proposals
Hi I'm looking for someone who can provide me with a 3D design model for my projects. Our projects are all kind of sectors such as solar power sections, SPA hotels, Water Desalination station. I need someone to have long term job with and doing 3D design model walk through animation for each project. Please send samples of the best quality of your previous work ( without logo) Best to be in range of the above items ( Power sections, SPA hotels and ..) Thanks
Category: 3D Modelling       
Skills: 3D, 3D Systems, 3D max       

s****e13
 [?]
Sign in to view client's details.
| s****e13
|    United States
Fixed Price: About $30   |  Posted: 1h, 46m ago  |  Ends: 14d, 22h  |   6 Proposals
We are looking for an engineer that is good in the area of designing, creating assembling drawing of CNC machine using Autocad and simulation of moving part reliable CNC machine of various size
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

t****007
 [?]
Sign in to view client's details.
| t****007
|    United States
Fixed Price: $60 - $80   |  Posted: 2h, 54m ago  |  Ends: 14d, 21h  |   0 Proposals
We are looking for an Engineer that can program the new Rasberry pi v2 device, booting the windows 10 software on the device then test it on an existing monitor pc to ensure it functionality..
Category: Electrical       

t****007
 [?]
Sign in to view client's details.
| t****007
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: 5h, 17m ago  |  Ends: 14d, 18h  |   3 Proposals
I would like to create a wireless serial comm port connection via gsm module. I want to replace my Rs232 USB cable.
Category: Electrical       
Skills: C, Arduino       

h****ono
 [?]
Sign in to view client's details.
| h****ono
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 5h, 33m ago  |  Ends: 14d, 18h  |   2 Proposals
? ???? ??????:30 ????????? ?? 30 ????,??? ????? ?? ???????? ??? ? ?????! ????? ??????? ??????? ? ???????,??? ? ??????! ????? ???????????! ???? ?????? ?? ??????????? ? 10 ???????? ?????????! ???? ???? ???????? ? ???????! ??? ????? ?????? ???????? ? ?????? ?????? ????????????? ????????? ??????!
Category: Product Design       

V****tev
 [?]
Sign in to view client's details.
| V****tev
|    Russia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 6h, 24m ago  |  Ends: 14d, 17h  |   12 Proposals
I would like to get a product design for a high tech blue tooth device. The design must look modern, esthetically appealing, and elegant. The dimensions should be within 3.1 cm W x 8 cm H and 1.75 cm thick. I will provide more information to the individual I would like to hire prior to starting so that a more accurate quote can be provided. The design will need to include 2 d and 3d measurements so that the hardware engineers can finalize the electronic layout.
Category: Product Design       

a****123
 [?]
Sign in to view client's details.
| a****123
|    Canada
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: 6h, 39m ago  |  Ends: 14d, 17h  |   14 Proposals
Hello, I'm looking for someone who has experience designing custom picture frames for manufacturing. I think a CAD file would be sent to the manufacturer but I'm not completely sure. The details for the frame are as follows and I can provide an example once we get started. Material: - The frame will be wood and painted white. - The cover over the photos will be a clear material like glass but lightweight and not easily breakable (maybe plastic or PVC). Mat and photo slots: - Mat will be white as well. - One slot for a 4" x 6" photo on one side of the frame. - Twelve slots for wallet-size (2.5" x 3.5") photos - two rows with six photos in each row - filling the other side. - Front of the frame only needs to display the top 2/3 of each wallet-size photo. Text: The front of the frame will say "my first year" in a modern, sans-serif font above the wallet-size photos. Dimensions: - The frame should get close to 0.6 x 17 x 9.5 inches but can be a bit large...
Category: Product Design       
Skills: 3D Modeling, AutoCAD, Manufacturing Design       

d****an9
 [?]
Sign in to view client's details.
| d****an9
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 7h, 41m ago  |  Ends: 14d, 16h  |   0 Proposals
Hi - I live in Squamish British Columbia. My wife and I live in a house in front of an empty lot that is about to be developed. The developer of the lot is seeking significant variances to setbacks and maximum height which will have a profoundly negative impact on our view. The basis for the variance is a claimed hardship due to the slope of the lot. I have attached documents relating to the development variance permits and bylaws relating to the District of Squamish for reference. I have been advised by a building designer (report attached) that it is possible to build on the lot without variances and there is no credible hardship. However, I am looking for someone with an engineering background to provide an assessment of impact to building complexity and cost should the standard Squamish bylaw zoning rules be adhered to. Particularly, there has been a claim that building on the slope is an expensive proposition. Happy to answer any questions you might have if it is of help. T...
Category: Civil & Structural       
Preferred Location: Canada

d****tel
 [?]
Sign in to view client's details.
| d****tel *
|    Canada
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: 8h, 22m ago  |  Ends: 14d, 15h  |   5 Proposals
I'm currently working on a mobile application that works with third party hardware. The application is socializing networking service and the third party hardware is an indoor navigation system. Freelancer must be: - Highly experienced with tracking devices (bluetooth, GPS, etc.) - Have knowledge of coding - Reliable - Responsive - Dedicated - Creative - Electrical engineer I am seeking a company or an individual to help me execute fully from idea to product. If you have read the above and feel you would be a good candidate, please forward a proposal with the work NECT. Thank you.
Category: Product Design       

M****kup
 [?]
Sign in to view client's details.
| M****kup
|    United States
Hourly Rate: Not Sure   |  Duration: 4-6 months  |  Posted: 8h, 38m ago  |  Ends: 29d, 15h  |   7 Proposals
Model in 3D parts described by us. Must have very good working knowledge of Autodesk Fusion 360 and AutoCAD.
Category: 3D Modelling       
Skills: AutoCAD, Product Design       

j****iek
 [?]
Sign in to view client's details.
| j****iek
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: 9h, 23m ago  |  Ends: 14d, 14h  |   14 Proposals
Hello, Im looking for assistance with an injection molding job. I have modeled the piece in solidworks and know it is ready for injection molding. It is a two part ABS housing for electronics. It needs draft angles added.
Category: 3D Modelling       
Skills: SolidWorks, Electronics       

S****oMK
 [?]
Sign in to view client's details.
| S****oMK
|    United States
Fixed Price: Less than $500   |  Posted: 10h, 32m ago  |  Ends: 14d, 13h  |   7 Proposals
3d file provided ~67" span. Need one run of cfd in 3d. Will provide parameters. Ansys Fluent preferred
Category: Other - Engineering &...       
Skills: 3D Modeling, ANSYS, Mechanical Engineering       

m****rt3
 [?]
Sign in to view client's details.
| m****rt3
|    United States
Fixed Price: $100 or less   |  Posted: 10h, 32m ago  |  Ends: 14d, 13h  |   7 Proposals
We are currently doing a project and we require some assistance in assembling our products. Too many interference. More we need help in converting into a mold tool design file.
Category: CAD       

d****230
 [?]
Sign in to view client's details.
| d****230
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 10h, 56m ago  |  Ends: 14d, 13h  |   9 Proposals
I am a practicing dentist and am attempting to improve on my LED lighted loupes which I use daily. I currently have some renderings, a designed circuit board, CAD drawings and circuit diagrams. Unfortunately the engineer who I had been working with has had some health problems and is unable to continue. He provided me digital files of all work performed thus far. I have a number of solid work files that I do not have the ability to view. At this time I need someone who can review the above items and see where I am in my project and whether or not they are viable. If they are viable, I would like an opinion as to the next step and possible manufacturing/production of said project. I am also interested in some patent protection of the prototype.
Category: Product Design       
Preferred Location: United States

m****bin
 [?]
Sign in to view client's details.
| m****bin
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: 11h, 8m ago  |  Ends: 14d, 12h  |   8 Proposals
Make section, Details,framing plan,Data sheet,coordinates Level points,Layout Drawing, From Planning and Shop Drawings Department
Category: Civil & Structural       
Skills: 3D Printing       

D****80s
 [?]
Sign in to view client's details.
| D****80s
|    Saudi Arabia
Fixed Price: Less than $500   |  Posted: 11h, 11m ago  |  Ends: 14d, 12h  |   11 Proposals
Hello I am a technical author and I would like someone to quote on re-drawing a number of technical engine diagrams. I will show you the original diagram and I would like to have it re-drawn to improve it's appearance and also get around copyright.
Category: 3D Modelling       

a****dog
 [?]
Sign in to view client's details.
| a****dog
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 11h, 35m ago  |  Ends: 14d, 12h  |   3 Proposals
I am looking to create the prototype and the final product for testing of a handheld vacuume cleaner.
Category: Mechanical       

K****nda
 [?]
Sign in to view client's details.
| K****nda
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: 11h, 59m ago  |  Ends: 14d, 12h  |   4 Proposals
We are soliciting help in designing and building a wifi enabled strain gage system of sensors mounted to a composite hockey stick, to gather structural force data in-situ. We've done some early work and need to develop a more robust user-friendly set of components that can be produced and used in the field to gather data.
Category: Electrical       
Skills: Industrial Design, Electronics       
Preferred Location: United States

i****ior
 [?]
Sign in to view client's details.
| i****ior
|    United States
Fixed Price: $500 - $1,000   |  Posted: 12h, 24m ago  |  Ends: 6d, 11h  |   12 Proposals
Making schematics and layout by EAGLE. Hopefully in 6 business days. These are prototyping pictures   [obscured]  /file/d/0By3zumES05rsNGE5cFMzcHVvTmM/view?usp=sharing   [obscured]  /file/d/0By3zumES05rsZ0hKNUp6ZEoyd2M/view?usp=sharing As you can see in these pics, this is just intermediate board. No special components, no difficult wiring. I will prepare handwriting schematics and I want to ask you to make it as EAGLE data. I plan to ask tiny another intermediate board which has only 2-3 connectors as well (I didn't decide yet). I hope to ask this job fixed price at $800. I think it would be nice price even such easy task. However I want to ask working quick and flexibility rather than precision.
Category: CAD       
Skills: Eagle       

k****lab
 [?]
Sign in to view client's details.
| k****lab
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job