Save this Search
     
Sort by:
  • Posted Date
Engineering & Manufacturing
Fixed Price: $1,000 - $5,000   |  Posted: 1h, 45m ago  |  Ends: 14d, 22h  |   1 Proposal
Development of a small mobile robot. Robot integrates : - 3 x DC motors - 1 x Camera - 1 x Microphone - 1 x Speaker - 1 x Accelerometer, Gyroscope, etc. - 1 x PCB LEDs - 1 x Battery - 1 x Accessory port for future accessories Development of the mobile platform electronic, can be based on Arduino, Beaglebone or other commercial available boards. Robot controlled from a software or application, which can be used from a computer, tablet or smartphone.
Category: Electrical       
Skills: Electronics       

c****ids
 [?]
Sign in to view client's details.
| c****ids
|    France
Fixed Price: Not Sure   |  Posted: 1h, 46m ago  |  Ends: 14d, 22h  |   1 Proposal
Development of a small mobile robot. Robot integrates : - 3 x DC motors - 1 x Camera - 1 x Microphone - 1 x Speaker - 1 x Accelerometer, Gyroscope, etc. - 1 x PCB LEDs - 1 x Battery - 1 x Accessory port for future accessories Development of the mobile platform electronic, can be based on Arduino, Beaglebone or other commercial available boards. Robot controlled from a software or application, which can be used from a computer, tablet or smartphone.
Category: Product Design       
Skills: Electronics       

c****ids
 [?]
Sign in to view client's details.
| c****ids
|    France
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: 1h, 56m ago  |  Ends: 14d, 22h  |   5 Proposals
The project is to design approx 16 townhouses on a block of land in a small 3600m2. Each townhouse shall include - 3 bedrooms (3x3m for 2nd and 3rd bedroom, main room a little larger) - 2.5 bathrooms (1 ensuite, toilet downstairs, family bathroom with bath) - Kitchen, living and dining room in an alfresco arrangement - single or double garage (6m x 3m for single, 6m x 5.7m for double) - Laundry - Double story Total living area (not including garage) is to be less than 100m2. The land has a gradient on it that make approx 7m over 100m. Retaining walls will have to be shown on the plans that are a maximum of 1m high but can be stepped at 1m from each other in areas that need it. Ideally fill and cut material will be equal. Backyards to have a minimum 36m2 area. An area of 4m x4m must receive sunlight for 3hrs on the winter solstice. The land has three frontages but only two can be used for driveways. The frontage with driveways are 45m and 20m. The design must comply with   [obscured]  
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD, Home Design       

T****eng
 [?]
Sign in to view client's details.
| T****eng
|    Australia
Fixed Price: $20 - $50   |  Posted: 2h, 16m ago  |  Ends: 14d, 21h  |   5 Proposals
We need drawings to give to a woodworker so he can build this desk. We prefer you do the in autocad / sketckup but if you have other software just mention what you would like to use. All our other projects require autocad but we can make an exception on this one. Drawings must be in enough detail ( dimensions etc.) so the woodworker can order material and build it . We need plans, elevation details, and 3d views ( 3 minimum) Attached is are 2 sketches of the design for the desk. Also we have attached a bunk bed design we had done - this shows the quality of what we want for the desk. Please note submissions without a fixed fee will not be considered. Please show only 1, 2, or 3 examples of furniture design. Thanks
Category: CAD       
Skills: AutoCAD, SolidWorks, SketchUp Pro, AutoDesk Revit       

s****ner
 [?]
Sign in to view client's details.
| s****ner
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 4h, 11m ago  |  Ends: 14d, 19h  |   3 Proposals
Looking for someone to write bid proposal for land surveying and civil engineering jobs. If I like your work this will become a regular thing.
Category: Civil & Structural       
Skills: ANSYS, AutoCAD, Civil Engineering       

e****726
 [?]
Sign in to view client's details.
| e****726
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 5h, 52m ago  |  Ends: 14d, 18h  |   9 Proposals
Hey Greg are you avail abel to complete some plans i had done by a freelancer over seas that they cant make the changes to, and i have a tight deadline, ? let me know? about 3-4 hours i think???
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

j****oft
 [?]
Sign in to view client's details.
| j****oft
|    Australia
Fixed Price: Not Sure   |  Posted: 6h, 9m ago  |  Ends: 29d, 17h  |   12 Proposals
Hello freelancers, I'm planing to redecorate my living place. There are: - Living room + Dinning room - 30m2, - Kitchen - 5m2. I will provide layout and some photos, also. I would like to have some 3D render of your ideas. Best, Sinisa
Category: Interior Design       
Skills: 3D Modeling, Architecture, Interior Design       

s****_bl
 [?]
Sign in to view client's details.
| s****_bl
|    Bosnia and Herzegovina
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 6h, 13m ago  |  Ends: 14d, 17h  |   5 Proposals
we are looking for a engineer or draftsman to design and detail light gauge steel house frames, we currently use truss d&e but anyone with experience in : Vertex : Framecad : any other This will be ongoing work on a long term basis.
Category: CAD       

j****100
 [?]
Sign in to view client's details.
| j****100
|    Australia
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: 8h, 21m ago  |  Ends: 14d, 15h  |   2 Proposals
I need somebody to help me find really cheap 3D printing services in USA. The printer need to have a print area bigger than 31cm x 31 cm
Category: 3D Modelling       
Skills: 3D, 3D Printing       

f****eck
 [?]
Sign in to view client's details.
| f****eck
|    United States
Fixed Price: Less than $500   |  Posted: 10h, 44m ago  |  Ends: 14d, 13h  |   14 Proposals
We would like to add addition in our existing home. At this moment we have 1200 Feet, but we could add up to 2000 feet more. we like to have 2 options one adding 499 sq and one for between 1500 to 1800 sq feet. it is corner lot. please check on google map out side view. Our Goal. 1. present current layout as much as could. 2. Add dinning room area next to kitchen toward back yard. 3. Add master bedroom with full bath. 4. Add laundry room 5. be very cost effective. not moving stuff to much. 6. Add deck basically you will be responsible for. 1. Blue print, Design of outside and inside, structural, footing, plumbing, electric,ac. what ever we need for finishing home. we will be open to any suggestion.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

l****all
 [?]
Sign in to view client's details.
| l****all
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: 10h, 49m ago  |  Ends: 14d, 13h  |   18 Proposals
We will provide 2d autocad drawings of Kitchens & we need these rendered in 3d as photorealistically as possible. The intention is to create a catalogue of sorts, that will act as ideas for inspiration. Initially, we will be requiring 50 kitchen renders, of different shapes and finishes. You are free to choose materials and decor around the kitchen, so as to create 50 unique designs. For each 3d design, you will have to render and provide 2 views from different angles. One unique finish is sufficient for each 3d design. There will be future work following this, including more kitchens, furniture, bathrooms, living rooms, bedrooms etc., based on work quality and a good working relationship.
Category: Architecture       

n****rrr
 [?]
Sign in to view client's details.
| n****rrr
|    India
Fixed Price: Less than $500   |  Posted: 11h, 54m ago  |  Ends: 1d, 12h  |   6 Proposals
temperature monitor and control It takes reading from a temperature sensor and display the value on a graph. It adjusts the fan speed to cool down or increase the temperature according to specific thresholds. It produces some external signals in emergency cases. It has Access Hierarchy to monitor users. .exe file Need it asap
Category: Other - Engineering &...       
Skills: Electronics       

i****889
 [?]
Sign in to view client's details.
| i****889
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 11h, 55m ago  |  Ends: 14d, 12h  |   7 Proposals
Sketches for a Product Design. I will provide the information for a product. I need many different sketches for a demo presentation of the product. This is more an illustration need rather than a real product development, nevertheless, the project is intended to end with a concept of product to be manufactured. This is a kitchen appliance.
Category: Product Design       
Preferred Location: United States

f****ejo
 [?]
Sign in to view client's details.
| f****ejo
|    United States
Fixed Price: $50 - $80   |  Posted: 11h, 56m ago  |  Ends: 1d, 12h  |   2 Proposals
need expert in math - communication engineer in order to derive some formulas more details as in attached file.
Category: Electrical       

m****lab
 [?]
Sign in to view client's details.
| m****lab
|    Jordan
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 12h, 37m ago  |  Ends: 6d, 11h  |   2 Proposals
We have a spinning display (prototype) which has a 7" display, motor to spin our product and using an Olimex board to run the video / audio. We have successfully prototyped this and now, we need a freelancer to optimize this design and prepare it for manufacturing as the cost is too high using the Olimex board and the associated 7" LCD/controller board. We are using a standard microwave oven motor to independently spin our product and this is directly connected to a switch and powered directly to an AC power source. The motor turns 360 degrees and then automatically reverses since we have created a mechanical stop. The way the unit will function is as follows: 1) User will turn on a power switch located on the bottom of the display 2) Display will provide power to the motor which will start spinning and simultenously power the microcontroller board to run the OS (i.e. Linus/Android). 3) OS will initiate and the user will see a splash screen which will allow them to e...
Category: Electrical       

p****one
 [?]
Sign in to view client's details.
| p****one
|    United States
Fixed Price: Not Sure   |  Posted: 13h, 18m ago  |  Ends: 14d, 10h  |   1 Proposal
Am looking for a Manufacture to produce Modesty clothing in large and small quantity. The clothing I want to be produced are Abayas, Dresses, Skirts, Scarves and many more.
Category: Contract Manufacturing       

i****ahm
 [?]
Sign in to view client's details.
| i****ahm
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: 13h, 47m ago  |  Ends: 14d, 10h  |   2 Proposals
i have a dust cover that i pulled off an old car. im looking to get it remade mostly correctly so that i can put a new one on. i have the part on hane and it will take some thinking to design the new part but it wouldnt take long /it is pretty simple. i need someone who can just design it using CAD design or something and the print out the design also. all we would need is a short sit down meeting to discuss details and ill pay around 20 bucks.
Category: 3D Modelling       
Skills: 3D Printing       

x****b13
 [?]
Sign in to view client's details.
| x****b13
|    United States
Fixed Price: $300 - $700   |  Posted: 14h, 57m ago  |  Ends: 14d, 9h  |   9 Proposals
I need architect for my new home design Cheif architect or AutoCAD revit any design software can be used. It has been drafted 95% accrording to australian standards but needs some improvents. Its 3 story house. Attached is some views and plans and will advise soon all the changes required. Attached is old copy and I have soft copy of this drawn in AutoCAD revit if it helps and will disclose exact things to person who is awarded with this project. This is extra but u need to quote now and finish after above. Need 3d rendered views of all the rooms on gound floor and first floor. Deliveries 1)Soft copy of design 2)Pdf files 1:100 scale for three floor plans, site plan, 4 elevations from all four directions maximum building and wall height labled from natural ground level. 3)Electrical layout only the lighting (that is lamps)
Category: Architecture       

m****aer
 [?]
Sign in to view client's details.
| m****aer
|    Australia
Hourly Rate: $40 - $50 / hr   |  Duration: Not Sure  |  Posted: 15h, 2m ago  |  Ends: 14d, 8h  |   3 Proposals
This job will involve updating a document that tracks changes in the ACI code provisions relating to a particular software package. The document currently tracks changes from ACI 318-02 through ACI 318-11 and needs to be updated for ACI 318-14. Candidate must be a structural engineer (not necessarily licensed) with experience in concrete design.
Category: Civil & Structural       
Skills: Civil Engineering       

E****Inc
 [?]
Sign in to view client's details.
| E****Inc
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 15h, 36m ago  |  Ends: 14d, 8h  |   1 Proposal
Hello, I am looking for someone to design a new children's towel from a concept we have for our new company. I have the basic concept but I need someone that can take the idea and create the physical product. We would like to send the completed design to a manufacture for production. We will also need to develop a logo for this product so someone that could help with that as well is desired but not required. We are looking for fun, creative people that can work well on a time frame and can help us design a top quality and on trend product for the children's market. We are also looking to develop strong working relationships with creative designers for future products. Successful applicants will have great reviews, competitive pricing, great communication skills and highly skilled in the textile design area. Experience in the children's/baby market is also highly desirable. Thanks, Andrea
Category: Product Design       

a****ult
 [?]
Sign in to view client's details.
| a****ult
|    United States
Fixed Price: Less than $500   |  Posted: 17h, 19m ago  |  Ends: 14d, 6h  |   10 Proposals
hi-i would like a cad file of my new house. i have roughly 15 .PLT files from the prior owner and multiple pictures. i am unable to view them so not sure what data they contain. i have attached a few to give you some idea of what is available. the house is approximately 2300 square feet. i would need some .PDFs of the .DWG to see the work as i can't open .DWGs. i wouldn't mind a 3D model/sketch up too as i am planning to do some remodeling. we can continue the job with the remodel ideas if we work good together :-). i am unsure what else you would need so please ask me any questions. much thanks, lisa
Category: CAD       
Skills: 3D Modeling, AutoCAD       

i****llc
 [?]
Sign in to view client's details.
| i****llc
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: 17h, 51m ago  |  Ends: 14d, 6h  |   0 Proposals
am an electrical engineer, i make designs for all electrical work using AutoCad i also work on excel word power point , i can make earthing resistance calculations i can teach math also
Category: Electrical       
Skills: AutoCAD, Slang-style Writing       

e****846
 [?]
Sign in to view client's details.
| e****846
|    Egypt
Fixed Price: Less than $500   |  Posted: 18h, 35m ago  |  Ends: 14d, 5h  |   3 Proposals
A magnet (roughly 1/8" in diameter) imbedded in a 1/8" thick ring (13/16" in diameter) . The magnet should blend into the ring and not surpass. The magnet has to be able to hold up about 1 pound of weight. The ring can be made out of aluminum or which ever metal would be most cost effective. For questions please send me an email, I will respond in a timely manner.
Category: Product Design       
Skills: Industrial Design, Manufacturing Design       

G****a90
 [?]
Sign in to view client's details.
| G****a90
|    Canada
Hourly Rate: More than $50 / hr   |  Duration: 1-3 months  |  Posted: 18h, 40m ago  |  Ends: 6d, 5h  |   8 Proposals
Job description: We are focused on producing excellent work in a dynamic environment, and offer many opportunities for the right candidate. The ideal candidate should demonstrate the following attributes: ? Creative talent - we place high importance on design ability and expressing creative ideas with clarity, working as part of a team in an inclusive process where the best ideas win. ? Technical foundation - experience with code research, specifications review, detailing, drawing organization and quality review, and construction administration. ? Attention to detail - the ability to take a design idea and execute it through careful and clear details, while protecting the design's integrity during construction. ? Highly motivated personality - willingness to enthusiastically and responsibly lead a team in complex and demanding projects. ? Excellent computer and presentation abilities. ? should be able to work online with minimal supervision. Key Responsibilities: ? As proje...
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: United States

v****a17
 [?]
Sign in to view client's details.
| v****a17 *
|    United States
Hourly Rate: More than $50 / hr   |  Duration: 3-4 weeks  |  Posted: 18h, 43m ago  |  Ends: 6d, 5h  |   1 Proposal
We are seeking to appoint an Electrical Testing & Commissioning Manager to advice our in-house testing and commissioning team. The role will primarily be to ensure compliance with NICEIC requirements, issue and collate the relevant certification and provide technical support to the project teams whilst overseeing the electrical testing and commissioning of specialist systems online. REPORTS TO: Authorising Engineer/Principal Duty Holder QUALIFICATIONS: The ideal candidate will have experience in electrical testing to a minimum of C&G 2394 and C&G 2395 or equivalent and previous experience on Commercial, Industrial and Medical sector projects as an NICEIC Qualified Supervisor is preferable but not essential. Additional experience that would be beneficial but not essential would be some experience in overseeing testing and commissioning of specialist systems. ATTRIBUTES/SKILLS: ? Good Technical Knowledge and interested in furthering that knowledge ? Computer Literacy ?...
Category: Electrical       
Preferred Location: United States

v****a17
 [?]
Sign in to view client's details.
| v****a17 *
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job